Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “green computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Pressureless sintering of lithium hydride

Lithium Hydride is a material of growing importance for addressing technological challenges related to nuclear fusion, long-term human space travel, and thermal energy storage. Pressureless sintering provides a straightforward, scalable approach to produce dense LiH parts of all sizes and shapes. Pressed LiH green compacts were sintered at heating rates from 2.5 to 20 °C/min to 650 °C, yielding densities up to 96 ± 1.4 %, with densification initiating at 500 °C. Here, a validated master sintering curve was constructed with a sintering apparent activation energy of 135 kJ/mol. X-ray diffraction and simultaneous thermal analysis revealed Li 2 O formation from 300 – 550 °C and decomposition of LiH into Li metal at 550 °C, each reflected as deviations in the master sintering curve. Computed tomography after thermal treatment to 550 °C showed the formation of corrosion products, and after thermal treatment to 650 °C LiH reduction to Li most significantly at exposed surfaces.

36 MATERIALS SCIENCE↗

Comprehensive reaction mechanism for n-butanol pyrolysis and combustion

A detailed reaction mechanism for n-butanol, consisting of 263 species and 3381 reactions, has been generated using the open-source software package, Reaction Mechanism Generator (RMG). The mechanism is tested against recently published data - jet-stirred reactor mole fraction profiles, opposed-flow diffusion flame mole fraction profiles, autoignition delay times, and doped methane diffusion flame mole fraction profiles - and newly acquired n-butanol pyrolysis experiments with very encouraging results. The chemistry of butanal is also validated against autoignition delay times obtained in shock tube experiments. A flux and sensitivity analysis for each simulated dataset is discussed and reveals important reactions where more accurate rate constant estimates were required. New rate constant expressions were computed using quantum chemistry and transition state theory calculations. Furthermore, in addition to comparing the proposed model with the eight datasets, the model is also compared with recently published n-butanol models for three of the datasets. Key differences between the proposed model and the published models are discussed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards AI Based Data Classification for Decision Making During Testing

During the development of high-consequence items, test systems should be capable of differentiating between test failures resulting from narrowly missing requirements versus those indicating potentially catastrophic faults. In many instances, classifying the data corresponds to simply identifying whether measured waveforms have approximately the anticipated shape. Cast in this light, the problem reduces to converting raw data into a form optimal for use with neural network classifiers. This manuscript investigates different means of representing raw data for image classification. Raw data plots and Short Time Fourier Transform (STFT) spectrograms are classified by both custom built, small-scale, Convolution Neural Networks (CNN) and open-source, multi-million parameter, pre-trained deep CNNs. In the case of time varying frequency content, the STFTs provide images with greater detail and can be accurately classified with simpler networks. This requires less memory and runs faster than classifying the raw data using the more sophisticated options—making STFTs optimal for applications with memory constraints. STFTs are not a panacea. In some cases the time-domain signal contains useful information that should not be discarded. Rather than using raw data or STFTs, the images can be constructed from both by using red and green channels of an RGB image to visualize the real and imaginary components of the transform, with the raw data occupying the blue channel.

97 MATHEMATICS AND COMPUTING↗

Green and red luminescence in co-precipitation synthesized Pr:LuAG nanophosphor

Pr:LuAG nanophosphor is an effective candidate in magnetic resonance imaging coupled positron emission tomography (MRI-PET) for medical imaging and scintillator applications. LuAG:Pr (0.05, 0.15 mol%) nanoscale ceramic powders were synthesized by co-precipitation method using urea as precipitant. Effect of antisite defect on structure and luminescence behavior was investigated. Pr:LuAG nanoceramic powders are found crystallized in cubic structure by high temperature calcination at 1400 °C and it shows antisite defect. HR-SEM analysis revealed spherically shaped Pr:LuAG nanoceramic particulate powders with ∼100 nm size. By the excitation at 450 nm, Pr:LuAG nanophosphor exhibit green to red luminescence in the wavelength range of 520 to 680 nm, which is originated from multiplet transition of Pr{sup 3+} ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Meromorphic approximants to complex Cauchy transforms with polar singularities

We study AAK-type meromorphic approximants to functions of the form F(z)={integral}(d{lambda}(t))/(z-t)+R(z), where R is a rational function and {lambda} is a complex measure with compact regular support included in (-1,1), whose argument has bounded variation on the support. The approximation is understood in the L{sup p}-norm of the unit circle, p{>=}2. We dwell on the fact that the denominators of such approximants satisfy certain non-Hermitian orthogonal relations with varying weights. They resemble the orthogonality relations that arise in the study of multipoint Pade approximants. However, the varying part of the weight implicitly depends on the orthogonal polynomials themselves, which constitutes the main novelty and the main difficulty of the undertaken analysis. We obtain that the counting measures of poles of the approximants converge to the Green equilibrium distribution on the support of {lambda} relative to the unit disc, that the approximants themselves converge in capacity to F, and that the poles of R attract at least as many poles of the approximants as their multiplicity and not much more. Bibliography: 35 titles.

97 MATHEMATICS AND COMPUTING↗

Rhythm of the Night (and Day): Predictive Metabolic Modeling of Diurnal Growth in Chlamydomonas

We have developed the first transient metabolic model for diurnal growth of algae based on experimental data and capable of predicting phenotype from genotype. This model enables us to evaluate the impact of genetic and environmental changes on the growth, biomass composition and intracellular fluxes of the model green alga, Chlamydomonas reinhardtii . The availability of this model will enable faster and more efficient design of cells for production of fuels, chemicals, and pharmaceuticals.

09 BIOMASS FUELS↗

VOTCA: multiscale frameworks for quantum and classical simulations in soft matter

Many physical phenomena in liquids and soft matter are multiscale by nature and can involve processes with quantum and classical degrees of freedom occurring over a vast range of length- and timescales. Examples range from structure formation processes of complex polymers or even polymer blends (Svaneborg & Everaers, 2023) on the classical side to charge and energy transport and conversion processes (Lee et al., 2019) involving explicit electronic and, therefore, quantum information. The Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) provides multiscale frameworks built on a comprehensive set of methods for the development of classical coarse-grained potentials (VOTCA-CSG) as well as state-of-the art excited state electronic structure methods based on density-functional and many-body Green’s function theories, coupled in mixed quantum-classical models and used in kinetic network models (VOTCA-XTP).

97 MATHEMATICS AND COMPUTING↗

Project Management Plan/Progress Report: UT/GTKS Training Program Development for Commercial Building Operators (Final Report)

Universidad del Turabo (UT), in a collaborative effort with Global Turn Key Services, Inc. (GTKS), proposed to develop a training program and a commercialization plan for the development of Commercial Building Operators (CBOs). The CBOs will operate energy efficient buildings to help maintain existing buildings up to their optimal energy performance level, and ensure that net-zero-energy buildings continuously operate at design specifications, thus helping achieve progress towards meeting BTP Strategic Goals of creating technologies and design approaches that enable net-zero-energy buildings at low incremental costs by 2025. The proposed objectives were then: (1) Develop a Commercial Building Operator (CBO) training program and accreditation that will in turn provide a certification to participants recognized by Accreditation Boards such as the North American Board of Certified Energy Practitioners (NABCEP) and Leadership in Energy & Environmental Designs (LEED). (2) Develop and implement a commercialization and sustainability plan that details marketing, deployment, financial characterization, job placement, and other goals required for long-term sustainability of the project after the funding period. (3) After program development and deployment, provide potential candidates with the knowledge and skill sets to obtain employment in the commercial building green energy (net-zero-energy building) job market. The developed CBO training program will focus on providing skills for participants, such as displaced and unemployed workers, to enter the commercial building green energy (net-zeroenergy building) job market. This course was designed to allow a participant with minimal to no experience in commercial building green technology to obtain the required skill sets to enter the job market in as little as 12 weeks of intensive multi-faceted learning. After completion of the course, the CBO staff concluded the participant will meet minimum established accreditation standards established by UT and will complete the contact hours required of training to apply to the Certification on Energy Management (CEM) offered by the Association of Energy Engineers (AEE). The CBO training program consists of a combination of theory (classroom), online & computer simulation, laboratory & hands on (onsite) training lessons. The training is addressed four basic learning elements: (1) Learn the Technology; (2) Practice Skills with hands-on the Energy Simulation Builder program; (3) Final Project and Presentation; and, (4) Accreditation and Certifications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Simulation of a rapid compression machine for evaluation of ignition chemistry and soot formation using gasoline/ethanol blends

Due to the projected decline of demand for gasoline in light duty engines and the advent of ethanol as a green fuel, the use of gasoline/ethanol blend fuels in heavy duty applications are being investigated as they are projected to have lower cost and lower lifecycle green house gas (GHG) emissions. In heavy duty engines, the primary mode of combustion is mixing controlled combustion where wide range of mixture conditions (equivalence ratio) exist. Soot emissions of these fuels in richer conditions are not well understood. The goal of this research is to evaluate some commercially available soot modeling codes for the particulate matter emissions from gasoline/ethanol fuel blends, especially at fuel rich conditions. A Rapid Compression Machine (RCM) is modeled in a three-dimensional numerical simulation using CONVERGE computational software using a reduced chemical kinetic mechanism with SAGE chemistry solver and a RANS k-ϵturbulence model with a sector model including the creviced piston. The creviced piston is used in the experimental setup to reduce boundary layer effects and to maintain a homogeneous core in the reaction cylinder. Computational fluid dynamics simulations are conducted for different gasoline-ethanol fuel blends from E10 (10% ethanol v/v) to E100. The fuel blend is modeled as a surrogate mixture of toluene, iso-octane, n-heptane for gasoline content, and ethanol. The computational results were validated against experimental results using pressure measurements and laser extinction diagnostics. Different soot models are investigated to evaluate their capability of predicting the sooting tendencies of fuel blends, especially in richer conditions experienced during mixing-controlled combustion. The experimental combustion characteristics such as the ignition delay of different blends of fuel are reasonably well predicted. The Particulate Size Mimic (PSM) model accurately predicts the soot generation characteristics of the different fuels, but the Hiroyasu-NSC model falls short in this regard. For accurate prediction of soot with the PSM model, the thermodynamic conditions during combustion must be accurately modeled. While the current computational modeling tools can produce accurate results for the prediction of particulate matter emissions, there is much work to be done in improving our understanding of the underlying fundamental processes.

Energy & Fuels↗

Theory and Simulation of Defects in Oxide Materials (Final Technical Report)

We explored a wide variety of oxide materials and related problems, including materials at the nanoscale and generic problems associated with oxide materials such as the development of more efficient computational tools to examine these materials. We developed and implemented methods to understand the optical and structural properties of oxides. For ground state properties, our work is predominantly based on pseudopotentials and density functional theory (DFT), including new functionals and going beyond the local density approximation (LDA): LDA+U. To study excited state properties (quasiparticle and optical excitations), we use time dependent density functional theory, the GW approach, and GW plus Bethe-Salpeter equation (GW-BSE) methods based on a many-body Green function approaches. Our work focused on the structural, electronic, optical and magnetic properties of defects (such as oxygen vacancies) in hafnium oxide, titanium oxide (both bulk and clusters) and related materials. We calculated the quasiparticle defect states and charge transition levels of oxygen vacancies in monoclinic hafnia. we presented a milestone G0W0 study of two of the crystalline phases of dye-sensitized TiO 2 clusters. We employed hybrid density functional theory to examine the electronic structure of sexithiophene/ZnO interfaces. To identify the possible effect of epitaxial strain on stabilization of the ferromagnetic state of LaCoO 3 (LCO), we compare the total energy of the magnetic and nonmagnetic states of the strained theoretical bulk structure.

36 MATERIALS SCIENCE↗

The effect of Coulomb interactions on nonlinear thermovoltage and thermocurrent in quantum dots

In the present work, we theoretically study the nonlinear regime of charge transport through a quantum dot coupled to the source and drain reservoirs. The investigation is carried out using a nonequilibrium Green’s function formalism beyond the Hartree-Fock approximation. Employed approximations for the relevant Green’s functions allow to trace a transition from Coulomb blockade regime to Kondo regime in the thermoelectric transport. Effects arising when electrons move in response to thermal gradient applied across the system are discussed, including experimentally observed thermovoltage zeros.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallographic structure and molecular dynamics simulations of the major endoglucanase from Xanthomonas campestris pv. campestris shed light on its oligosaccharide products release pattern

Cellulases are critical enzymatic components for the transformation of plant biomass into fuels, renewable materials and green chemicals. In this work, we determined the crystal structure, pattern of hydrolysis products release, and conducted molecular dynamics simulations of the major endoglucanase from the Xanthomonas campestris pv. campestris (XccCel5A). XccCel5A has a TIM barrel fold with the catalytic site centrally placed in a binding groove surrounded by aromatic side chains. Molecular dynamics simulations show that productive position of the substrate is secured by a network of hydrogen bonds in the four main subsites, which differ in details from homologous structures. Capillary zone electrophoresis and computational studies reveal XccCel5A can act both as endoglucanase and licheninase, but there are preferable arrangements of substrate regarding β-1,3 and β-1,4 bonds within the binding cleft which are related to the enzymatic efficiency.

59 BASIC BIOLOGICAL SCIENCES↗

Wind Turbine Design Optimization for Hydrogen Production

To help meet the need for inexpensive green fuels, we are working on wind turbine design optimization specifically for hydrogen production. We have thus far achieved a 1.53% decrease in LCOH as compared to a turbine optimized for LCOE using the same code, design variables, and models. We accomplished this by optimizing some components of the wind turbine tower, rotor, and drivetrain design with hydrogen production and costs in the design loop.

hydrogen↗

Augmented Reality Tools for Nuclear Facilities - 18318

In this work we explore the possibility of improving nuclear facility operations through the use of emerging augmented reality technology. Specifically we focus on the use of augmented reality headsets. Augmented reality opens up the possibility for easy, on-the-fly access to documentation related to canisters, rooms, and carts. It also can be used to help plan complicated material moves in ways that do not violate nuclear criticality safety regulations. Modern augmented reality technology can also be interacted with using gaze, gesture and voice commands, thus making it particularly attractive for facilitating the documentation of nuclear material operations and work verification. An augmented reality-based nuclear facility criticality safety system would have a number of benefits for operations in nuclear facilities. This work could be used across the DOE complex to ensure technicians in gloveboxes work safely and securely. It could greatly reduce downtime associated with administrative criticality incidents. It would be a step forward in the process of improving the quality of documentation of the work that occurs in nuclear facilities while simultaneously increasing the ease with which this documentation can be collected. The augmented reality effectively endows the glovebox technicians with a sense for administrative nuclear criticality safety and the reactivity changes caused directly by their actions. Augmented reality also has great potential for facilitating inspections of nuclear infrastructure. Examples of Augmented Reality applications that facilitate infrastructure inspection and work verification will also be presented. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The development of a high-resolution Eulerian radiation-hydrodynamics simulation capability for laser-driven Hohlraums

Hohlraums are hollow cylindrical cavities with high-Z material walls used to convert laser energy into uniform x-ray radiation drives for inertial confinement fusion capsule implosions and high energy density physics experiments. Credible computational modeling of hohlraums requires detailed modeling and coupling of laser physics, hydrodynamics, radiation transport, heat transport, and atomic physics. We report on improvements to Los Alamos National Laboratory's xRAGE radiation-hydrodynamics code in order to enable hohlraum modeling. xRAGE's Eulerian hydrodynamics and adaptive mesh refinement make it uniquely well suited to study the impacts of multiscale features in hohlraums. In order to provide confidence in this new modeling capability, we demonstrate xRAGE's ability to produce reasonable agreement with data from several benchmark hohlraum experiments. We also use xRAGE to perform integrated simulations of a recent layered high density carbon capsule implosion on the National Ignition Facility in order to evaluate the potential impacts of the capsule support tent, mixed cell conductivity methodologies, plasma transport, and cross-beam energy transfer (XBT). We find that XBT, seeded by plasma flows in the laser entrance hole (LEH), causes a slight decrease in energy coupling to the capsule and that all of these impact the symmetry of the x-ray drive such that they have an appreciable impact on the capsule implosion shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WENO schemes on arbitrary unstructured meshes for laminar, transitional and turbulent flows

This paper presents the development and implementation of weighted-essentially-non-oscillatory (WENO) schemes for viscous flows on arbitrary unstructured grids. WENO schemes up to fifth-order accurate have been implemented in conjunction with hybrid and non-hybrid unstructured grids. The schemes are investigated with reference to numerical and experimental results for the Taylor–Green vortex, as well as for laminar and turbulent flows around a sphere, and the turbulent shock-wave boundary layer interaction flow problem. The results show that the accuracy of the schemes depends on the arbitrariness of shape and orientation of the unstructured mesh elements, as well as the compactness of directional stencils. The WENO schemes provide a more accurate numerical framework compared to second-order and third-order total variation diminishing (TVD) methods, however, the fifth-order version of the schemes is computationally too expensive to make the schemes practically usable. On the other hand, the third-order variant offers an excellent numerical framework in terms of accuracy and computational cost compared to the fifth-order WENO and second-order TVD schemes. Parallelisation of the CFD code (henceforth labelled as UCNS3D), where the schemes have been implemented, shows that the present methods offer very good scalable performance.

42 ENGINEERING↗

A Chemist’s Guide to Solid-State Qubits: Diamond Color Centers as Embedded Vacancy-Centered Molecules

Diamond point defects or color centers are at the crux of solid-state quantum technology applications, from computing to sensing. Modeling molecular qubits has advanced by leaps and bounds mainly due to the advanced quantum mechanical (QM) tools in the arsenal of quantum chemists for modeling (isolated) molecular systems, which should be easily translatable for analogous systems in the solid state. Here, we simulate a series of diamond defects: a carbon vacancy (V C ) and second row substitutions that are adjacent to a V C or D C V C , with D = B, N, and O, to evaluate their magnetic and optical properties. We applied molecular orbital principles, an embedded cluster method, and a multiconfigurational QM theory to computationally characterize the above-mentioned defects for a multitude of spin, charge, and excited states. Our computational approach delivered high-quality QM insights that compare well with experiments. Furthermore, with this framework, we confirm the spin-triplets B C V C – and O C V C 0 to be analogous to N C V C – , with calculated bright transitions that respectively correspond to UV (3.80 eV) and blue (2.65 eV) light absorption and emission lifetimes (τ) of 2.3 and 5.6 ns, which are higher in energy and more short-lived (and thus brighter) than that for N C V C – : green (2.26 eV), τ = 9.5 ns.

Martirez, John Mark P. [Princeton Plasma Physics L↗

Digitally manufactured air plasma-on-water reactor for nitrate production

The sustainable production of food to support the increasing world population is one of humanity’s most pressing challenges. Plasma activated water, produced using renewable energy, can help fulfill plants’ needs in sustainable agriculture approaches. The design, implementation, and characterization of a digitally manufactured air plasma-on-water reactor (POWR) for the synthesis of nitrate as green nitrogen fertilizer is presented. The interaction of air plasma-generated reactive oxygen and nitrogen species with water produces nitrate (NO 3 - ) and related species, which are the main nitrogen-containing nutrients for plants. The mild conditions of the operation of the POWR opens the possibility to use plastics, particularly through digital manufacturing strategies such as 3D-printing, for its fabrication. A pin-to-plate reactor configuration powered by high-voltage alternating power is chosen due to its simplicity and efficacy. A computational thermal-fluid model is used to evaluate the design and attain expected operational characteristics. The experimental characterization of the POWR encompassed design and operation parameters, namely electrode-water spacing, air flow rate, and voltage level. A machine learning approach is implemented to extract and quantify characteristic features of the plasma–water interaction, such plasma volume and plasma–water interface area. Experimental results revealed that the nitrate production rate varies linearly with dimensionless plasma volume. The design, fabrication, and characterization methods presented can be adapted to other POWRs and help enable on-demand nitrogen fertilizer production at low environmental and economic cost.

Physics↗