Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generation equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Construction of composite three dimensional grids from subregion grids generated by elliptic systems

A technique is presented for constructing a boundary-conforming grid throughout a general three-dimensional flow region as a composite of subregion grids. Each subregion grid is generated numerically by solving a nonlinear system of elliptic equations. The boundary values represent nodal points in a quasi-two-dimensional grid that covers the curved surface bounding the subregion, and are generated numerically by a modified elliptic system. A primary feature of the technique is that the composite three-dimensional grid remains both continuous and smooth across the surface of juncture between any two adjoining subregions. Sample results are given for a wing-body combination.

Thomas, P. D.↗

Bleed-boundary conditions for numerically simulated mixed-compression supersonic inlet flow

A numerical study was performed to investigate boundary conditions for bleed openings that are needed in the numerical simulation of critical flow through turbojet inlets with bleed. Nine different boundary conditions (BCs) were devised and examined. Of the BCs examined, three were able to stabilize the terminal shock near the inlet's throat. This numerical study was based on the ensemble-averaged, unsteady, three-dimensional, compressible Navier-Stokes equations closed by the Baldwin-Lomax algebraic turbulence model. Solutions to the Navier-Stokes equations were obtained by using a hybrid implicit-explicit method (Beam and Warming/MacCormack). The multiblock grid system used in the solution procedure was generated by solving a set of elliptic partial differential equations. Solutions obtained were compared with available experimental data.

Chyu, W. J.↗

Mathematical model of a flexible space shuttle vehicle

The development of a mathematical model of the lateral motion of a flexible space shuttle vehicle during ascent is described. The model was developed to perform control system synthesis using stochastic constrained optimization techniques. The goals of the control system synthesis are to demonstrate the applicability of the techniques and to discover any problems peculiar to the flexible nature of a shuttle vehicle. The equations of motion are derived. A brief description of the generation of numerical data is given. Explicit definitions and numerical values of trajectory data and coefficients appearing in the equations of motion are included.

Harvey, C. A.↗

Existence and Regularity Results for the Inviscid Primitive Equations with Lateral Periodicity

The article is devoted to prove the existence and regularity of the solutions of the 3D inviscid Linearized Primitive Equations (LPEs) in a channel with lateral periodicity. This was assumed in a previous work (Hamouda et al. in Discret Contin Dyn Syst Ser S 6(2):401–422, 2013) which is concerned with the boundary layers generated by the corresponding viscous problem. Although the equations under investigation here are of hyperbolic type, the standard methods do not apply because of the specificity of the hyperbolic system. A set of non-local boundary conditions for the inviscid LPEs has to be imposed at the lateral boundary of the channel making thus the system well-posed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decentralized Data-Driven Estimation of Generator Rotor Speed and Inertia Constant Based on Adaptive Unscented Kalman Filter

This paper proposes an online decentralized and data-driven method for synchronous generator rotor speed and inertia estimation. First, an analytical relationship between the generator terminal voltage/current phasors and its internal rotor speed is derived using the Thevenin equivalent. The parameters of the latter are obtained via a recursive estimator, which allows us to estimate the generator's internal rotor speed from voltage/current phasors without the need for any generator information. Second, we reformulate the equivalent swing equation into the Kalman filter form, which enables us to use a priori-estimated internal rotor speed along with measured real and reactive power injections to obtain an estimate of the inertia for each online synchronous generator. This is achieved through an adaptive unscented Kalman filter. We demonstrate that the use of terminal bus frequency to approximate the rotor speed for inertia estimation by existing methods leads to large estimation biases/errors. Numerical simulations carried out on the IEEE 39-bus and Texas 2000-bus systems reveal that our proposed method is consistently more accurate than existing methods. Moreover, our proposed method is insensitive to both the type and location of system disturbances, and it is robust to different levels of measurement noise.

bus frequency↗

Development of efficient computer program for dynamic simulation of telerobotic manipulation

Research in robot control has generated interest in computationally efficient forms of dynamic equations for multi-body systems. For a simply connected open-loop linkage, dynamic equations arranged in recursive form were found to be particularly efficient. A general computer program capable of simulating an open-loop manipulator with arbitrary number of links has been developed based on an efficient recursive form of Kane's dynamic equations. Also included in the program is some of the important dynamics of the joint drive system, i.e., the rotational effect of the motor rotors. Further efficiency is achieved by the use of symbolic manipulation program to generate the FORTRAN simulation program tailored for a specific manipulator based on the parameter values given. The formulations and the validation of the program are described, and some results are shown.

Chen, J.↗

Theory of strong turbulence by renormalization

The hydrodynamical equations of turbulent motions are inhomogeneous and nonlinear in their inertia and force terms and will generate a hierarchy. A kinetic method was developed to transform the hydrodynamic equations into a master equation governing the velocity distribution, as a function of the time, the position and the velocity as an independent variable. The master equation presents the advantage of being homogeneous and having fewer nonlinear terms and is therefore simpler for the investigation of closure. After the closure by means of a cascade scaling procedure, the kinetic equation is derived and possesses a memory which represents the nonMarkovian character of turbulence. The kinetic equation is transformed back to the hydrodynamical form to yield an energy balance in the cascade form. Normal and anomalous transports are analyzed. The theory is described for incompressible, compressible and plasma turbulence. Applications of the method to problems relating to sound generation and the propagation of light in a nonfrozen turbulence are considered.

Tchen, C. M.↗

Energy transfer and magnetic field generation via ion-beam driven instabilities in an electron-ion plasma

Whether an efficient collisionless temperature equilibration mechanism exists for a two-temperature ion-electron plasma, with T{sub i}>T{sub e}, is important for understanding astrophysical phenomena such as two-temperature accretion flows and collisionless shocks in supernova remnants or gamma-ray bursts. In this paper, counter-streaming ion beam-driven two-stream, Weibel (or filamentation), and oblique instabilities are studied using two-dimensional (2D) particle-in-cell (PIC) simulations as a possible plasma instability that could operate in such astrophysical objects. The PIC simulations show interplay among these instabilities and that distinct stages with different dominant modes occur during the nonlinear evolution period. Although the 2D results show stronger electron-ion coupling than the one-dimensional (1D) instabilities, it is still too weak to rule out existing two-temperature accretion solutions. The nonrelativistic quasilinear equations for the 1D Weibel plus 1D two-stream modes are numerically solved to compare the results with the 2D PIC simulations and qualitative similarities were found. The equations also show that the magnetic fields generated by the Weibel instability decay to zero in the end.

79 ASTRONOMY AND ASTROPHYSICS↗

Fast-Ion Energy-Flux Enhancement from Ultrathin Foils Irradiated by Intense and High-Contrast Short Laser Pulses

Recent significant improvements of the contrast ratio of chirped pulse amplified pulses allows us to extend the applicability domain of laser accelerated protons to very thin targets. In this framework, we propose an analytical model particularly suitable to reproducing ion laser acceleration experiments using high intensity and ultrahigh contrast pulses. The model is based on a self-consistent solution of the Poisson equation using an adiabatic approximation for laser generated fast electrons which allows one to find the target thickness maximizing the maximum proton (and ion) energies and population as a function of the laser parameters. Model furnished values show a good agreement with experimental data and 2D particle-in-cell simulation results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CFD Verification and Validation of Wire-Wrapped Pin Assemblies

TerraPower is participating in a cooperative project among industry, the national lab system, and academia to perform Verification and Validation (V and V) of Computational Fluid Dynamics (CFD) methods for predicting the flow and heat transfer within liquid-metal-cooled nuclear fuel assemblies with wire-wrapped fuel pins. This project, consisting of both experimental and numerical components, uses surrogate fluids and electrically heated fuel pins to substitute for the liquid metal coolant and the nuclear heat source. The experiments include both unheated assemblies to measure the flow velocities with Laser Doppler Velocimetry (LDV) and Particle Image Velocimetry (PIV), as well as heated assemblies to measure the temperatures of the fluid and the simulated fuel pins with thermocouples. Both sets of experiments also measure the pressure at multiple locations in the system. The numerical component of this work involves high-fidelity Large-Eddy Simulation (LES) modeling and industry-standard Reynolds-Averaged Navier-Stokes (RANS) modeling of the experiments. Furthermore, the experiments and simulations will be conducted on two duct geometries: the first is a non-deformed hexagonal duct that has flat internal duct faces that represents a beginning of life geometry. The other is a deformed duct where the internal hexagonal flow area enlarges then decreases along the axial height to represent the changes that occur to the duct geometry from pressure and irradiation effects in the core. This paper describes the methods and results of the industrial, RANS-based CFD code verification, solution verification, and solution validation. The V and V simulations are being performed for the following experiment test geometries: - Isothermal non-deformed bundle; - Heated non-deformed bundle; - Isothermal deformed bundle; - Heated deformed bundle. These flows have been computed at first with the pre-test design specifications, without the aid of any experimental results. Later, post-test calculations will be performed incorporating the actual test conditions and input from some of the experimental results. These RANS simulations of helically wire-wrapped fuel assemblies employ meshes of bare pins without the wire-wrap in the bundle. The effect of wire-wrap on the flow is accounted for by introducing a momentum source into the governing fluid equations. The momentum source is only applied to cells corresponding to the location of the wire-wrap, and its components in each cell are based on the local flow field. This methodology simplifies the geometry and mesh generation and reduces the cell count, while still capturing the effects of the wire-wrap. The momentum source approach is used for all of the assembly simulations performed in this study. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On Integral of a Semi-Markov Diffusion Process

Let (X(t)) (t ≥ 0) be a semi-Markov diffusion process. The process (J(T )) (T ≥ 0) equal to the integral of (X(t)) on interval [0, T ) is studied. The relation between one-dimensional differential equation of the second order of elliptical type and asymptotics of a solution to Dirichlet problem on an interval with length tending to zero is established. This relation is used to derive a differential equation for the Laplace transform of the semi-Markov generating function of the process (J(t)).

97 MATHEMATICS AND COMPUTING↗

Gravitational dynamics in s+1+1 dimensions II. Hamiltonian theory

We develop a Hamiltonian formalism of braneworld gravity, which singles out two preferred, mutually orthogonal directions. One is a unit twist-free field of spatial vectors with integral lines intersecting perpendicularly the brane. The other is a temporal vector field with respect to which we perform the Arnowitt-Deser-Misner decomposition of the Einstein-Hilbert Lagrangian. The gravitational variables arise from the projections of the spatial metric and their canonically conjugated momenta as tensorial, vectorial and scalar quantities defined on the family of hypersurfaces containing the brane. They represent the gravitons, a gravi-photon, and a gravi-scalar, respectively. From the action we derive the canonical evolution equations and the constraints for these gravitational degrees of freedom both on the brane and outside it. By integrating across the brane, the dynamics also generates the tensorial and scalar projection of the Lanczos equation. The vectorial projection of the Lanczos equation arises in a similar way from the diffeomorphism constraint. Both the graviton and the gravi-scalar are continuous across the brane, however the momentum of the gravi-vector has a jump, related to the energy transport (heat flow) on the brane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heat-release equation of state and thermal conductivity of warm dense carbon by proton differential heating

Warm dense carbon is generated at 0.3–2.0 g/cc and 1–7 eV by proton heating. The release equation of state (EOS) after heating and thermal conductivity of warm dense carbon are studied experimentally in this regime using a Au/C dual-layer target to initiate a temperature gradient and two picosecond time-resolved diagnostics to probe the surface expansion and heat flow. Comparison between the data and simulations using various EOSs and thermal conductivity models is quantified with a statistical χ2 analysis. In conclusion, out of seven EOS tables and five thermal conductivity models, only L9061 with the Lee-More model provides a probability above 50% to match all data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical computation of exponential matrices using the Cayley-Hamilton theorem

A method for computing exponential matrices, which often arise naturally in the solution of systems of linear differential equations, is developed. An exponential matrix is generated as a linear combination of a finite number (equal to the matrix order) of matrices, the coefficients of which are scalar infinite sums. The method can be generalized to apply to any formal power series of matrices. Attention is focused upon the exponential function, and the matrix exponent is assumed tri-diagonal in form. In such cases, the terms in the coefficient infinite sums can be extracted, as recursion relations, from the characteristic polynomial of the matrix exponent. Two numerical examples are presented in some detail: (1) the three dimensional infinitesimal rotation rate matrix, which is skew symmetric, and (2) an N-dimensional tri-diagonal and symmetric finite difference matrix which arises in the numerical solution of the heat conduction partial differential equation. In the second example, the known eigenvalues and eigenvectors of the finite difference matrix permit an analytical solution for the exponential matrix, through the theory of diagonalization and similarity transformations, which is used for independent verification. The convergence properties of the scalar infinite summations are investigated for finite difference matrices of various orders up to ten, and it is found that the number of terms required for convergence increases slowly with the order of the matrix.

Walden, H.↗

Generation of zonal flows by electrostatic drift waves in electron-positron-ion plasmas

Generation of large-scale zonal flows by comparatively small-scale electrostatic drift waves in electron-positron-ion plasmas is considered. The generation mechanism is based on the parametric excitation of convective cells by finite amplitude drift waves having arbitrary wavelengths (as compared with the ion Larmor radius of plasma ions at the plasma electron temperature). Temperature inhomogeneity of electrons and positrons is taken into account assuming ions to be cold. To describe the generation of zonal flow generalized Hasegawa-Mima equation containing both vector and two scalar (of different nature) nonlinearities is used. A set of coupled equations describing the nonlinear interaction of drift waves and zonal flows is deduced. Explicit expressions for the maximum growth rate as well as for the optimal spatial dimensions of the zonal flows are obtained. Enriched possibilities of zonal flow generation with different growth rates are revealed. The present theory can be used for interpretations of drift wave observations in laboratory and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimum hot water temperature for absorption solar cooling

The hot water temperature that maximizes the overall instantaneous efficiency of a solar cooling facility is determined. A modified characteristic equation model is used and applied to single-effect lithium bromide-water absorption chillers. This model is based on the characteristic temperature difference and serves to empirically calculate the performance of real chillers. This paper provides an explicit equation for the optimum temperature of vapor generation, in terms of only the external temperatures of the chiller. The additional data required are the four performance parameters of the chiller and essentially a modified stagnation temperature from the detailed model of the thermal collector operation. This paper presents and discusses the results for small capacity machines for air conditioning of homes and small buildings. The discussion highlights the influence of the relevant parameters. (author)

14 SOLAR ENERGY↗

Ellipticity dependence of high harmonic yield in intense laser field: case of s-valence electron

Having solved numerically the time-dependent Schrödinger equation, we have analysed the dependence of the high harmonic generation yield on the ellipticity of an intense laser field. For the case of a zero angular momentum of an initial state, it has been shown that the ellipticity dependence of the HHG yield is affected by the harmonic number. The numerical results are interpreted in the framework of our recently developed quasi-classical analytical model for HHG. In the quasi-classical approximation, the difference in the ellipticity dependence of the HHG yield for different harmonics is shown to be caused by the interference effects of quantum orbits. (extreme laser radiation: physics and fundamental applications)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of the Hall effect on the plasma dynamics in an MTF/MAGO chamber

The role of the Hall effect in experiments on the magnetic implosion of a D-T plasma in a cylindrical MTF/MAGO chamber fed from a helical explosive magnetic generator is investigated. The plasma dynamics is simulated numerically by a 2D code developed for solving the set of MHD equations with account of the Hall effect. In simulations, the generator, the break switch, and other units were replaced with LR circuits. It is shown that taking into account the Hall effect provides better agreement between numerical simulations and experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗