Status of Combustion Research on High-energy Fuels for Ram Jets
Explore the source record for details and available documents.
Olson, Walter T↗
SEARCH · Engineering Papers
Results for “fuel combustion”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thermal Relations for Two-phase Expansion with Phase Equilibrium and Example for Combustion Products of Boron-containing Fuel
Explore the source record for details and available documents.
Tower, Leonard K↗
Pressure Rise, Gas Vibrations and Combustion Noises During the Explosion of Fuels
In the use of piezo-quartz indicators for high-speed automobile engines, the interpretation of pressure-time diagrams made by an oscillograph offers certain difficulties. On the one hand, the scale of the pressure amplitudes is not always the same under all conditions, while, on the other hand, the atmospheric zero line may be shifted from its correct position in the oscillogram. These facts make necessary to verify the readings of the quartz indicators by direct calibration before and after each series of tests and, on the basis of the results, to determine the scale for the oscillograms.
Wawrziniok,↗
Application of Gas Analysis to Combustor Research
The performance of turbine-engine combustors usually is given in terms of operating limits and combustion efficiency. The latter property is determined most often by measuring the increase in enthalpy across the combustor through the use of thermocouples. This investigation was conducted to determine the ability of gas-analytical techniques to provide additional information about combustor performance. Gas samples were taken at the outlet and two upstream stations and their compositions determined. In addition to over-all combustion efficiency, estimates of local fuel-air ratios, local combustion efficiencies, and heat-release rates can be made. Conclusions can be drawn concerning the causes of combustion inefficiency and may permit corrective design changes to be made more intelligently. The purpose of this investigation was not to present data for a given combustor but rather to show the types and value of additional information that can be gained from gas-analytical data.
Hibbard, R. R.↗
2020 DOE AMR: Co-Optima Multi-Mode: From In-Cylinder Combustion Diagnostics to Drive-Cycle Fuel Economy.
Abstract not provided.
Sjoberg, Carl Magnus Goran↗
Experimental Studies on Enhanced Ignition for Improved Pre-Chamber Combustion in Gas Engines
Global efforts to reduce greenhouse gas emissions and mitigate climate change have intensified the demand for cleaner and more efficient combustion technologies. Heavyduty engines, which remain essential for transportation and power generation, must operate with significantly lower emissions while maintaining high efficiency and fuel flexibility. Lean combustion and exhaust gas recirculation (EGR) offer promising pathways to reduce emissions and improve thermal efficiency; however, these strategies impose severe challenges for engine operation, especially for low reactivity gaseous fuels like natural gas and ammonia. Pre-chamber combustion has emerged as a viable approach that uses turbulent jets to accelerate main chamber ignition, but its performance can degrade under high dilution or with hard-to-ignite fuels. These limitations motivate the central focus of this dissertation: understanding passive pre-chambers and improving their performance under challenging conditions.
Dhotre, Akash [Univ. of Minnesota, Minneapolis, MN↗
Thermophysics Characterization of Kerosene Combustion
A one-formula surrogate fuel formulation and its quasi-global combustion kinetics model are developed to support the design of injectors and thrust chambers of kerosene-fueled rocket engines. This surrogate fuel model depicts a fuel blend that properly represents the general physical and chemical properties of kerosene. The accompanying gaseous-phase thermodynamics of the surrogate fuel is anchored with the heat of formation of kerosene and verified by comparing a series of one-dimensional rocket thrust chamber calculations. The quasi-global combustion kinetics model consists of several global steps for parent fuel decomposition, soot formation, and soot oxidation, and a detailed wet-CO mechanism. The final thermophysics formulations are incorporated with a computational fluid dynamics model for prediction of the combustor efficiency of an uni-element, tri-propellant combustor and the radiation of a kerosene-fueled thruster plume. The model predictions agreed reasonably well with those of the tests.
Wang, Ten-See↗
Optical Diagnosis of Gas Turbine Combustors Being Conducted
Researchers at the NASA Glenn Research Center, in collaboration with industry, are reducing gas turbine engine emissions by studying visually the air-fuel interactions and combustion processes in combustors. This is especially critical for next generation engines that, in order to be more fuel-efficient, operate at higher temperatures and pressures than the current fleet engines. Optically based experiments were conducted in support of the Ultra-Efficient Engine Technology program in Glenn's unique, world-class, advanced subsonic combustion rig (ASCR) facility. The ASCR can supply air and jet fuel at the flow rates, temperatures, and pressures that simulate the conditions expected in the combustors of high-performance, civilian aircraft engines. In addition, this facility is large enough to support true sectors ("pie" slices of a full annular combustor). Sectors enable one to test true shapes rather than rectangular approximations of the actual hardware. Therefore, there is no compromise to actual engine geometry. A schematic drawing of the sector test stand is shown. The test hardware is mounted just upstream of the instrumentation section. The test stand can accommodate hardware up to 0.76-m diameter by 1.2-m long; thus sectors or small full annular combustors can be examined in this facility. Planar (two-dimensional) imaging using laser-induced fluorescence and Mie scattering, chemiluminescence, and video imagery were obtained for a variety of engine cycle conditions. The hardware tested was a double annular sector (two adjacent fuel injectors aligned radially) representing approximately 15 of a full annular combustor. An example of the two-dimensional data obtained for this configuration is also shown. The fluorescence data show the location of fuel and hydroxyl radical (OH) along the centerline of the fuel injectors. The chemiluminescence data show C2 within the total observable volume. The top row of this figure shows images obtained at an engine low-power condition, and the bottom row shows data from a higher power operating point. The data show distinctly the differences in flame structure between low-power and high-power engine conditions, in both location and amount of species produced (OH, C2) or consumed (fuel). The unique capability of the facility coupled with its optical accessibility helps to eliminate the need for high-pressure performance extrapolations. Tests such as described here have been used successfully to assess the performance of fuel-injection concepts and to modify those designs, if needed.
Hicks, Yolanda R.↗
Investigating the potential of a higher reactivity fuel to achieve faster heat-up of aftertreatment systems
Shortening the aftertreatment system heat-up period will be crucial to meet upcoming emissions regulations, which mandate significant reductions in tail-pipe emissions for on-road heavy-duty vehicles. This work studies the impact of increasing fuel reactivity on the combustion of post injections during the expansion stroke. The work demonstrates an operating strategy using a blend of di-butyl ether (a potential low-carbon biofuel component) and #2 diesel that achieves higher exhaust enthalpy, while maintaining similar engine-out emissions (NOx and combustion efficiency) in comparison to the baseline #2 diesel fuel (cetane number 41). On average, a 12% increase in exhaust enthalpy was observed for the blend (cetane number 60) relative to the baseline fuel. The ability to operate the higher reactivity fuel at a more retarded post-injection timing, where combustion with #2 diesel was found to be more unstable, and less complete was key to achieving higher exhaust enthalpy. However, a small fuel penalty (3%–5%) was also associated with the higher reactivity fuel with this operating strategy. The formation of fuel lean regions, due to the long ignition delays at late injection conditions, was predicted to be the leading contributor to the increased emissions of products of partial combustion. Here, chemical kinetic simulations using surrogates for the fuels used in the experiments, demonstrated the ability of a higher cetane fuel to outperform the baseline fuel under fuel lean conditions with equivalence ratios less than 0.7.
09 BIOMASS FUELS↗
Investigation of fuel film formation and soot emissions in a GDI engine during cold-start with Split-injection strategies
This study investigates the impact of fuel-film formation on engine-out soot emissions in a gasoline direct injection (GDI) engine under cold-start conditions. Split-injection strategies were applied by varying the number of injections, injection duration, and total fuel quantity to affect wall wetting and control the average in-cylinder equivalence ratio. A combined experimental and numerical approach was employed to analyze fuel-film deposition, combustion efficiency, and engine-out soot and unburnt hydrocarbons (UHC) emissions. In particular, fuel film distribution estimated by means of non-reacting, 3-D, computational fluid dynamics (CFD) simulations, together with experimentally measured soot data, were used to investigate fuel film formation and its role in soot generation. In the experiments, a skip-fired engine control strategy was applied to mimic the transient nature of engine cold-start operation. The results indicate that, under the same total number of injections, increasing the average in-cylinder equivalence ratio through longer injection durations improves combustion stability, as indicated by the decrease of the coefficient of variation of IMEP n (Net Indicated Mean Effective Pressure) from 6.0 % to 0.6 %. However, this strategy leads to higher soot emissions, which increased by nearly an order of magnitude, primarily due to enhanced wall-film formation. In contrast, increasing the number of injections while maintaining a constant equivalence ratio significantly impacts fuel-film deposition and, consequently, soot emissions, with a fivefold reduction of the measured engine-out soot, decreasing from 3.5 mg to 0.7 mg. A soot-film correlation was developed and achieved a high coefficient of determination (r 2 = 0.95) and was further extended to account for spark timing effects. These findings confirm the effectiveness of split-injection for avoiding wall film formation and soot emissions, and the critical role of fuel film in soot generation, supporting the hypothesis that pool fires play a crucial role in contributing to soot formation under these cold-start conditions. In conclusion, the study also indicates the value of a predictive soot-film correlation for developing cold-start emission control strategies.
Engine Cold-start↗
Combustion Gas Properties I-ASTM Jet a Fuel and Dry Air
A series of computations was made to produce the equilibrium temperature and gas composition for ASTM jet A fuel and dry air. The computed tables and figures provide combustion gas property data for pressures from 0.5 to 50 atmospheres and equivalence ratios from 0 to 2.0.
Jones, R. E.↗
Cost-constrained adaptive simulations of transient spray combustion in a gas turbine combustor
Predictive high-fidelity simulations of turbulent spray combustion must capture the combined effects of complex chemistry, multiphase evaporating flow and spray-flame interactions to achieve physical accuracy. Finite-rate chemistry (FRC) combined with a realistic chemical mechanism is a combustion model well-suited for this purpose, but has a high computational cost due to the large number and stiffness of transported chemical species. In contrast, flamelet-based models achieve lower cost by transporting a small number of quantities of reduced stiffness, but assumptions regarding local flame topology, boundary conditions and inter-phase coupling limit their physical accuracy. Recently, the Pareto-efficient combustion (PEC) framework was developed to dynamically assign combustion models based on local cost and accuracy metrics in gas-phase reacting flows. In this work, we extend this PEC framework to spray combustion through the rigorous analysis of the multiphase coupling terms in the governing equations. The derivation shows that spray evaporation causes errors in the prediction of species mass fractions for flamelet-based models due to the sensitivity of the local thermo-chemical state to changes in composition caused by fuel vaporization across combustion regimes present in practical spray combustion devices. Sub-model assignment is formulated as a multiple-choice knapsack problem, where computational cost is directly controlled through the fraction of the domain assigned to the FRC sub-model. The extended PEC formulation is applied to the simulation of a realistic rich-quench-lean gas turbine combustor at steady-state conditions, as well as transient operation resulting in lean blow-out (LBO). Analysis of transient simulations during LBO demonstrates the extended PEC formulation’s capacity to dynamically adapt to changing conditions within the combustor. Transient combustor dynamics are shown to approach convergence with limited increases in computational cost, while retaining substantial computational cost reduction compared to monolithic FRC simulations. Through PEC simulations with increasing fractions of the domain assigned to FRC, monolithic flamelet simulations are shown to over-predict flame stability during LBO. Finally, the extended PEC formulation is thus shown to overcome deficiencies of monolithic models by controlling modeling error for multiphase combustion modeling.
33 ADVANCED PROPULSION SYSTEMS↗
Combustion Synthesis of Sm0.5Sr0.5CoO3-x and La0.6Sr0.4CoO3-x Nanopowders for Solid Oxide Fuel Cell Cathodes
Nanopowders of Sm0.5Sr0.5CoO(3-x) (SSC) and La0.6Sr0.4CoO(3-x) (LSC) compositions, which are being investigated as cathode materials for intermediate temperature solid oxide fuel cells, were synthesized by a solution-combustion method using metal nitrates and glycine as fuel. Development of crystalline phases in the as-synthesized powders after heat treatments at various temperatures was monitored by x-ray diffraction. Perovskite phase in LSC formed more readily than in SSC. Single phase perovskites were obtained after heat treatment of the combustion synthesized LSC and SSC powders at 1000 and 1200 C, respectively. The as-synthesized powders had an average particle size of ~12 nm as determined from x-ray line broadening analysis using the Scherrer equation. Average grain size of the powders increased with increase in calcination temperature. Morphological analysis of the powders calcined at various temperatures was done by scanning electron microscopy.
Bansal, Narottam P.↗
Mixing-Controlled Compression Ignition Combustion with Low-Lifecycle-CO 2 Fuels
Reducing lifecycle carbon-dioxide (CO 2 ) and toxic emissions via electrification or switching to carbon-free fuels is not currently feasible for many off-road, rail, and marine applications. This is due to factors including excessive cost, weight, or size of a battery of sufficient capacity to meet the application requirements, lack of infrastructure, insufficient time for recharging, demanding duty cycles, and severe ambient conditions. The guiding vision for the activities described herein is to enable rapid, cost-effective reductions of the environmental impacts of such applications by using improved, high efficiency engine combustion strategies with currently available and emerging low lifecycle-CO 2 fuels (LLCFs). This report summarizes progress toward achieving this vision in two project areas. The first is a Technology Commercialization Fund (TCF) project focused on facilitating the commercialization of ducted fuel injection (DFI) with LLCFs. The second is a more fundamental, Advanced Combustion Engines (ACE) research project focused on elucidating a new strategy called lean mixing-controlled combustion (LMCC) for use with emerging LLCFs.
33 ADVANCED PROPULSION SYSTEMS↗
Combustion Characteristics of a Tier II Gasoline Certification Fuel and its Surrogate with Iso-butanol: experiments and detailed numerical modeling
This presentation will describe results of an experimental and numerical study of combustion of a Tier II gasoline certification fuel and its surrogate blended with iso-butanol as a potential biofuel additive. The experiments were carried out under conditions where gas transport originated entirely by fuel evaporation with external convection (both forced and natural) were minimized. The resulting near spherically symmetric droplet flames were amenable to detailed numerical modeling. The droplet initial diameters were in the narrow range of 0.55 mm to 0.62 mm while and burning is performed under standard atmosphere. The combustion characteristics such as evolution of droplet, flame and soot shell diameters for indolene/iso-butanol and surrogate/iso-butanol mixtures are compared. The presence of iso-butanol is experimentally found to reduce the formation of soot as the iso-butanol concentration was increased. Simulations are also reported using a detailed kinetic chemistry comprised of 324 species and 17608 reactions using the CRECK POLIMI mechanism. The detailed numerical model included unsteady gas and liquid transport, soot chemistry and radiative transport. Droplet burn rates were well predicted while flame diameters showed more variability depending on how the flame was defined in the numerical simulation (peak gas temperature and OH concentration). Simulations also show the influence of iso-butanol concentration on flame temperature, greenhouse gas emissions and particulate emissions.
Guo, Songtao↗
Methodology for the development of empirical models relating 13C NMR spectral features to fuel properties
Effective formulation of new gasoline or diesel fuels for internal combustion engines would benefit from the development of reliable models for predicting key fuel properties based on a set of molecular descriptors obtained from a single measurement. This is particularly relevant in the case of renewable fuels, where the available fuel sample quantity may be limited. In this work, we present a statistically-based methodology for building empirical models to predict multiple properties from one-dimensional 13C nuclear magnetic resonance (NMR) spectra measured on around 200 microliters of a liquid fuel. NMR spectra contain information about the molecular composition of a sample and the carbon types and molecular substructures therein. Our approach uses this information to build sparse, interpretable models, where the predicted properties are linked to specific molecular features. The approach takes into consideration the constrained nature of the features making up the one-dimensional NMR spectrum, which, after standardization, represent a relative fuel composition. We point to the limitations in interpretability that arise when building this type of empirical predictive model and suggest how these limitations may be diminished. Among the many properties important for maximizing engine performance and minimizing emissions, we build models that predict derived cetane number and distillation temperatures as these are of particular interest because of their links to fuel economy, drivability, and engine-out emissions. Results suggest that the properties of interest may be impacted by only a few of the 27 13C NMR regions represented in the data, pointing to new directions for further testing in the development of improved fuels.
predictive models, biofuels., NMR Analysis↗
Compatibility of alternative fuels with advanced automotive gas turbine and stirling engines. A literature survey
The application of alternative fuels in advanced automotive gas turbine and Stirling engines is discussed on the basis of a literature survey. These alternative engines are briefly described, and the aspects that will influence fuel selection are identified. Fuel properties and combustion properties are discussed, with consideration given to advanced materials and components. Alternative fuels from petroleum, coal, oil shale, alcohol, and hydrogen are discussed, and some background is given about the origin and production of these fuels. Fuel requirements for automotive gas turbine and Stirling engines are developed, and the need for certain reseach efforts is discussed. Future research efforts planned at Lewis are described.
Cairelli, J.↗
Screening of Potential Biomass-Derived Streams as Fuel Blendstocks for Mixing Controlled Compression Ignition Combustion
Mixing controlled compression ignition or diesel engines are highly efficient and are likely to continue to be the primary means for movement of goods for many years to come. Low-carbon biofuels have the potential to significantly reduce the carbon footprint of diesel combustion and could potentially have advantageous properties for combustion such as high cetane number and reduced engine out particle emissions. In this study, we developed a list of potential biomass-derived diesel blendstocks. An online database of properties and characteristics of these bioblendstocks was populated with data. Fuel properties were determined by measurement, model prediction, or literature review. Screening criteria were developed to determine if a bioblendstock met the basic requirements for handling in the diesel distribution system and use as a blend with conventional diesel. Criteria included cetane number =40, flashpoint =52 degrees C, and boiling point or final boiling point <338 degrees C. Blendstocks needed to be soluble in diesel fuel, have a toxicity no worse than conventional diesel, and not be corrosive. Additionally, cloud point or freezing point below 0 degrees C was required. This screening produced a list of 27 potential bioblendstocks. Of these candidates, 13 were available commercially or could be synthesized by biofuels production researchers and included 11 nominally pure components and two mixtures. These 13 candidates were then subjected to further study based on how they impact fuel properties upon blending. Blend properties included cetane number, lubricity, conductivity, oxidation stability and viscosity. Results indicate that all thirteen candidates can meet the basic requirements for diesel fuel blending and are likely to reduce particle emissions from diesel combustion.
09 BIOMASS FUELS↗