Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Prediction of Gas Leak Tightness of Superplastically Formed Products

In some applications, in this case an aluminium box in a subatomic particle detector containing highly sensitive detecting devices, it is important that a formed sheet should show no gas leak from one side to the other. In order to prevent a trial-and-error procedure to make this leak tight box, a method is set up to predict if a formed sheet conforms to the maximum leak constraint. The technique of superplastic forming (SPF) is used in order to attain very high plastic strains before failure. Since only a few of these boxes are needed, this makes, this generally slow, process an attractive production method. To predict the gas leak of a superplastically formed aluminium sheet in an accurate way, finite element simulations are used in combination with a user-defined material model. This constitutive model couples the leak rate with the void volume fraction. This void volume fraction is then dependent on both the equivalent plastic strain and the applied hydrostatic pressure during the bulge process (backpressure).

36 MATERIALS SCIENCE↗

Cadmium Chemical Form in Mine Waste Materials by X-ray Absorption Spectroscopy

This study examines the molecular form of cadmium (Cd) present in mine wastes by X-ray Absorption Spectroscopy (XAS; Cd>20 mg/kg) using the K-edge of Cd at the Photon Factory Advanced Ring (PF-AR), NW10A beam line at KEK-Tsukuba-Japan. Mine waste materials and zinc concentrate were analyzed for Cd by ICPMS prior to undertaking XAS (range 21-452 mg/kg). Model compounds (CdO, Cd(OH){sub 2}, CdCO{sub 3}, Cdacetate, CdS, Cdstearate, CdDEDTC) and samples were examined in solid form at 20 K. The XANES spectra showed similar E max values for both model compounds and samples. The EXAFS showed that Cd-S in CdS, gives a flatter spectrum in the extended region compared to Cd-O found with CdCO{sub 3}, CdO and Cd Stearate. Linear combination fitting with model Cd compounds did not give clear assignments of composition, indicating that more detailed EXAFS spectra is required as mineral forms containing Cd were present rather than simple Cd compounds such as CdCO{sub 3}. The Cd bond for a single shell model in mine waste sample matrices appears to be either Cd-O or Cd-S, or a combination of both. Comparison of molecular data from the XAS studies with bioaccessibility data giving a prediction of bioavailability for mine waste materials provides useful information about the significance of the cadmium form as a contaminant for health risk assessment purposes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Equal Biaxial Pre-Strain on Forming Limit Diagram of AA5083

In this work, the effect of equal biaxial pre-strain on the forming limit curve (FLC) of 5083 aluminum alloy has been investigated. For this purpose, in the first stage, square blanks with dimensions of 200 mm in each length were cut from the original sheet and stretched by a spherical punch to the specified heights. Then, specimens were prepared by cutting the pre-strained blanks with the longitudinal axis parallel and perpendicular to the rolling direction. In the second stage, the specimens were tested by the out-of-plane test method to determine the forming limit diagram (FLD) according to the ISO 12004. Furthermore, forming limit stress diagram (FLSD) was determined by using Hill's quadratic yield function. The results showed that the equal biaxial pre-straining decreased and shifted the FLC to the right hand side of the diagram. However, it had not any effect on the forming limit stress curves.

36 MATERIALS SCIENCE↗

Numerical simulation of multi-layered textile composite reinforcement forming

One important perspective in aeronautics is to produce large, thick or/and complex structural composite parts. The forming stage presents an important role during the whole manufacturing process, especially for LCM processes (Liquid Composites Moulding) or CFRTP (Continuous Fibre Reinforcements and Thermoplastic resin). Numerical simulations corresponding to multi-layered composite forming allow the prediction for a successful process to produce the thick parts, and importantly, the positions of the fibres after forming to be known. This paper details a set of simulation examples carried out by using a semi-discrete shell finite element made up of unit woven cells. The internal virtual work is applied on all woven cells of the element taking into account tensions, in-plane shear and bending effects. As one key problem, the contact behaviours of tool/ply and ply/ply are described in the numerical model. The simulation results not only improve our understanding of the multi-layered composite forming process but also point out the importance of the fibre orientation and inter-ply friction during formability.

36 MATERIALS SCIENCE↗

Paradigm Change: Alternate Approaches to Constitutive and Necking Models for Sheet Metal Forming

This paper reviews recent work proposing paradigm changes for the currently popular approach to constitutive and failure modeling, focusing on the use of non-associated flow rules to enable greater flexibility to capture the anisotropic yield and flow behavior of metals using less complex functions than those needed under associated flow to achieve that same level of fidelity to experiment, and on the use of stress-based metrics to more reliably predict necking limits under complex conditions of non-linear forming. The paper discusses motivating factors and benefits in favor of both associated and non-associated flow models for metal forming, including experimental, theoretical, and practical aspects. This review is followed by a discussion of the topic of the forming limits, the limitations of strain analysis, the evidence in favor of stress analysis, the effects of curvature, bending/unbending cycles, triaxial stress conditions, and the motivation for the development of a new type of forming limit diagram based on the effective plastic strain or equivalent plastic work in combination with a directional parameter that accounts for the current stress condition.

36 MATERIALS SCIENCE↗

Fast and slow crystal growth kinetics in glass-forming melts

Published values of crystal growth rates are compared for supercooled glass-forming liquids undergoing congruent freezing at a planar crystal-liquid interface. For the purposes of comparison pure metals are considered to be glass-forming systems, using data from molecular-dynamics simulations. For each system, the growth rate has a maximum value U{sub max} at a temperature T{sub max} that lies between the glass-transition temperature T{sub g} and the melting temperature T{sub m}. A classification is suggested, based on the lability (specifically, the propensity for fast crystallization), of the liquid. High-lability systems show “fast” growth characterized by a high U{sub max}, a low T{sub max} / T{sub m}, and a very broad peak in U vs. T / T{sub m}. In contrast, systems showing “slow” growth have a low U{sub max}, a high T{sub max} / T{sub m}, and a sharp peak in U vs. T / T{sub m}. Despite the difference of more than 11 orders of magnitude in U{sub max} seen in pure metals and in silica, the range of glass-forming systems surveyed fit into a common pattern in which the lability increases with lower reduced glass-transition temperature (T{sub g} / T{sub m}) and higher fragility of the liquid. A single parameter, a linear combination of T{sub g} / T{sub m} and fragility, can show a good correlation with U{sub max}. For all the systems, growth at U{sub max} is coupled to the atomic/molecular mobility in the liquid. It is found that, across the diversity of glass-forming systems, T{sub max} / T{sub g} = 1.48 ± 0.15.

36 MATERIALS SCIENCE↗

Universal scaling of potential energy functions describing intermolecular interactions. I. Foundations and scalable forms of new generalized Mie, Lennard-Jones, Morse, and Buckingham exponential-6 potentials

Based on the formulation of the analytical expression of the potential V(r) describing intermolecular interactions in terms of the dimensionless variables r*=r/rm and !*=V/!, where rm is the separation at the minimum and ! the well depth, we propose more generalized scalable forms for the commonly used Lennard-Jones, Mie, Morse and Buckingham exponential-6 potential energy functions (PEFs). These new generalized forms have an additional parameter from and revert to the original ones for some choice of that parameter. In this respect, the original forms can be considered as special cases of the more general forms that are introduced. We also propose a scalable, but nonrevertible to the original one, 4-parameter extended Morse potential.

Xantheas, Sotiris S.↗

Effects of partitioned enthalpy of mixing on glass-forming ability

We explore the inherent reason at atomic level for the glass-forming ability of alloys by molecular simulation, in which the effect of partitioned enthalpy of mixing is studied. Based on Morse potential, we divide the enthalpy of mixing into three parts: the chemical part (Δ E{sub nn}), strain part (Δ E{sub strain}), and non-bond part (Δ E{sub nnn}). We find that a large negative Δ E{sub nn} value represents strong AB chemical bonding in AB alloy and is the driving force to form a local ordered structure, meanwhile the transformed local ordered structure needs to satisfy the condition (Δ E{sub nn}/2 + Δ E{sub strain}) < 0 to be stabilized. Understanding the chemical and strain parts of enthalpy of mixing is helpful to design a new metallic glass with a good glass forming ability. Moreover, two types of metallic glasses (i.e., “strain dominant” and “chemical dominant”) are classified according to the relative importance between chemical effect and strain effect, which enriches our knowledge of the forming mechanism of metallic glass. Finally, a soft sphere model is established, different from the common hard sphere model.

36 MATERIALS SCIENCE↗

Structural transformation between long and short-chain form of liquid sulfur from ab initio molecular dynamics

We present results of ab initio molecular dynamics study of the structural transformation occurring in hot liquid sulfur under high pressure, which corresponds to the recently observed chain-breakage phenomenon and to the electronic transition reported earlier. The transformation is temperature-induced and separates two distinct polymeric forms of liquid sulfur: high-temperature form composed of short chain-like fragments with open endings and low-temperature form with very long chains. We offer a structural description of the two liquid forms in terms of chain lengths, cross-linking, and chain geometry and investigate several physical properties. We conclude that the transformation is accompanied by changes in energy (but not density) as well as in diffusion coefficient and electronic properties—semiconductor-metal transition. We also describe the analogy of the investigated process to similar phenomena that take place in two other chalcogens selenium and tellurium. Finally, we remark that the behavior of heated liquid sulfur at ambient pressure might indicate a possible existence of a critical point in the low-pressure region of sulfur phase diagram.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An experimental verification of a criterion for forming metastable phases in containerless solidification

On the thermodynamic condition for forming a metastable phase from undercooled melt in a containerless state, we had proposed a criterion that crystals will preferentially form if they have a smaller entropy of fusion than the entropy of fusion of equilibrium crystals (Kuribayashi et al., Mater. Sci. Eng., A 449–451, 675 (2007)). This criterion is proposed for being applied to materials that exhibit a faceted interface, such as semiconductors and oxides. However, no experimental data that support this criterion have been obtained. From this point, we used an aerodynamic levitator as a tool for forming metastable phases from undercooled melt and verified the above-mentioned criterion using LnFeO{sub 3} (Ln: lanthanide and Y) as the model material. In addition, the condition for double recalescence, which corresponds to forming metastable phases and stable phases, was discussed in terms of competitive 2D isomorphic nucleation of the metastable phase and 3D polymorphic nucleation of the stable phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional imaging of the ultracold plasma formed in a supersonic molecular beam

Double-resonant excitation of nitric oxide in a seeded supersonic molecular beam forms a state-selected Rydberg gas that evolves to form an ultracold plasma. This plasma travels with the propagation of the molecular beam in z over a variable distance as great as 600 mm to strike an imaging detector, which records the charge distribution in the dimensions, x and y. The ω{sub 1} + ω{sub 2} laser crossed molecular beam excitation geometry convolutes the axial Gaussian distribution of NO in the molecular beam with the Gaussian intensity distribution of the perpendicularly aligned laser beam to create an ellipsoidal volume of Rydberg gas. Detected images describe the evolution of this initial density as a function of selected Rydberg gas initial principal quantum number, n{sub 0}, ω{sub 1} laser pulse energy (linearly related to Rydberg gas density, ρ{sub 0}) and flight time. Low-density Rydberg gases of lower principal quantum number produce uniformly expanding, ellipsoidal charge-density distributions. Increase either of n{sub 0} or ρ{sub 0} breaks the ellipsoidal symmetry of plasma expansion. The volume bifurcates to form repelling plasma volumes. The velocity of separation depends on n{sub 0} and ρ{sub 0} in a way that scales uniformly with ρ{sub e}, the density of electrons formed in the core of the Rydberg gas by prompt Penning ionization. Conditions under which this electron gas drives expansion in the long axis dimension of the ellipsoid favours the formation of counter-propagating shock waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication and characterization of tunnel barriers in a multi-walled carbon nanotube formed by argon atom beam irradiation

We have evaluated tunnel barriers formed in multi-walled carbon nanotubes (MWNTs) by an Ar atom beam irradiation method and applied the technique to fabricate coupled double quantum dots. The two-terminal resistance of the individual MWNTs was increased owing to local damage caused by the Ar beam irradiation. The temperature dependence of the current through a single barrier suggested two different contributions to its Arrhenius plot, i.e., formed by direct tunneling through the barrier and by thermal activation over the barrier. The height of the formed barriers was estimated. The fabrication technique was used to produce coupled double quantum dots with serially formed triple barriers on a MWNT. The current measured at 1.5 K as a function of two side-gate voltages resulted in a honeycomb-like charge stability diagram, which confirmed the formation of the double dots. The characteristic parameters of the double quantum dots were calculated, and the feasibility of the technique is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of local structures on crystallization in deeply undercooled metallic glass-forming liquids

The crystallization mechanism in deeply undercooled ZrCu metallic glass-forming liquids was investigated via molecular dynamics simulations. It was found that the crystallization process is mainly controlled by the growth of crystal nuclei formed by the BCC-like atomic clusters, consistent with experimental speculations. The crystallization rate is found to relate to the number of growing crystal nuclei in the crystallization process. The crystallization rate in systems with more crystal nuclei is significantly hindered by the larger surface fractions of crystal nuclei and their different crystalline orientations. It is further revealed that in the crystallization in deeply undercooled regions, the BCC-like crystal nuclei are formed from the inside of the precursors formed by the FCC-like atomic clusters, and growing at the expense of the precursors. Meanwhile, the precursors are expanding at the expense of the outside atomic clusters. This process is consistent with the so-called Ostwald step rule. The atomic structures of metallic glasses are found to have significant impact on the subsequent crystallization process. In the Zr{sub 85}Cu{sub 15} system, the stronger spatial correlation of Cu atoms could hinder the crystallization processes in deeply undercooled regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental characterization of a section of a spherically imploding plasma liner formed by merging hypersonic plasma jets

In this work, we report experimental results on merging of hypersonic plasma jets, which is the fundamental building block for forming spherically imploding plasma liners as a potential standoff compression driver for magneto-inertial fusion. Jets are formed and launched by contoured-gap coaxial plasma guns mounted at the six vertices and the center of a hexagon covering approximately one-tenth of the surface area of a 9-ft-diameter spherical chamber. First, from experiments with two and three merging jets of four different species (N, Ar, Kr, and Xe), we show that (1) density spatial non-uniformities can be large (with electron-density jumps ranging from 2.9 for N to 6.6 for Xe) when shocks form upon jet merging, but smaller (density jumps <2) when shocks do not form; (2) jet impurities (20% Ti in these experiments) can increase the level of density spatial non-uniformity by increasing the collisionality of jet merging, leading to shock formation rather than potentially more desirable shockless jet merging; and (3) the liner Mach number can remain high (≳10), as required for plasma liners to be an effective compression driver. Secondly, from experiments with six and seven merging jets using Ar, we present results with improved jet-to-jet mass balance of <2% across jets, including (1) evidence of substantially increased balance in the jet merging and symmetry of the liner structure and (2) potentially favorable changes in the jet-merging morphology with the addition of the seventh jet. Ultimately, for both experiments, we present comparisons between experimental and synthetic data from three-dimensional hydrodynamic codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural evolution in Au- and Pd-based metallic glass forming liquids and the case for improved molecular dynamics force fields

The results of a combined experimental and computational investigation of the structural evolution of Au 81 Si 19 , Pd 82 Si 18 , and Pd 77 Cu 6 Si 17 metallic glass forming liquids are presented. Electrostatically levitated metallic liquids are prepared, and synchrotron x-ray scattering studies are combined with embedded atom method molecular dynamics simulations to probe the distribution of relevant structural units. Metal–metalloid based metallic glass forming systems are an extremely important class of materials with varied glass forming ability and mechanical processibility. High quality experimental x-ray scattering data are in poor agreement with the data from the molecular dynamics simulations, demonstrating the need for improved interatomic potentials. The first peak in the x-ray static structure factor in Pd 77 Cu 6 Si 17 displays evidence for a Curie–Weiss type behavior but also a peak in the effective Curie temperature. In conclusion, a proposed order parameter distinguishing glass forming ability, 1/(S(T,q 1 )−1, shows a peak in the effective Curie temperature near a crossover temperature established by the behavior of the viscosity, T A .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled Dielectric Breakdown to Form Pinhole Passivating Contacts

This contribution explores an alternate route to forming pinhole-based poly-Si/dielectric/c-Si passivating contacts. The method utilizes controlled dielectric breakdown or electroforming to produce nanoscale pinholes in a thick (non-tunnelling) dielectric which, when annealed, allows dopant atoms to pass from doped poly-Si through the pinholes and into the c-Si wafer, forming conductive pathways. We show that the pinholes lose passivation after electroforming but can be repassivated with a forming gas anneal. N-type contacts show contact resistivities of ~20 mOhm-cm2, but p-type contacts are ~100 mOhm-cm2. Devices show a distinct kink in the J-V curve indicative of a barrier to transport. The method can be expanded to optimized dielectric passivation stacks (not just thin, single layers) and can be formed in parallel over the faces of the wafer in selected areas (pinholes only under the grid lines).

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗

Interactions of clathrate hydrate promoters sodium dodecyl sulfate and tetrahydrofuran investigated using 1H diffusion nuclear magnetic resonance at hydrate-forming conditions

Thermodynamic hydrate promoters and kinetic hydrate promoters can be used to reduce the P–T conditions for clathrate hydrate synthesis to decrease the nucleation induction time while increasing growth rates. Two commonly used promoters for hydrate research are tetrahydrofuran (THF) and sodium dodecyl sulfate (SDS), which can increase the overall hydrate promotion when used in tandem as compared to individually. There are several molecular theories regarding how SDS promotes hydrate growth. This study explores the micellular theory, for which hydrate formation depends on surfactant aggregates (micelles) at a critical micelle concentration (CMC) to increase the interfacial surface area. The micellular theory is the most investigated and criticized surfactant hydrate promotion theory. To address questions related to micellar behavior, this study investigates the intermolecular behavior between SDS and THF for the identification of micelles at hydrate-forming conditions. The systems explored contained THF at 3 and 5 wt. % with varying concentrations of SDS below and above the CMC. Several methods including a qualitative visual method, conductivity, interfacial tensiometry, 13C Liquid-state Nuclear Magnetic Resonance (NMR) spectroscopy, and 1H diffusion NMR spectroscopy were evaluated at temperatures below the Krafft point of SDS and above 0 °C. The presence of THF at low concentrations decreased the critical temperature for the formation of SDS micelles, where SDS is solubilized in THF/water solution at hydrate-forming temperatures without precipitation. The CMC of SDS was decreased significantly even at hydrate-forming conditions. Mixed surfactant–cosolvent micellular behavior of SDS in the presence of low concentrations of THF was confirmed at hydrate-forming conditions above 0 °C.

Chemistry↗

151 Eu Mössbauer study of magnetic ordering in flux-grown ferromagnetic and antiferromagnetic forms of EuCd 2 As 2

EuCd 2 As 2 is a remarkably complex magnetic semimetal that may behave as a topological insulator or host two pairs of Weyl points, depending on the growth conditions and the final magnetic state. Both antiferromagnetic (AFM) and ferromagnetic (FM) forms have been grown, and we show here, using 151 Eu Mössbauer spectroscopy, that the differences between the AFM and FM forms extend well beyond their ground state magnetic structures. Whereas the AFM form undergoes a conventional AFM → paramagnetic transition on warming, the FM form passes through a complex incommensurate modulated state before becoming paramagnetic.

36 MATERIALS SCIENCE↗