Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow lines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Numerical study of transition to supersonic flows in the edge plasma

The plasma scrape-off layer (SOL) in a tokamak is characterized by ion flow down a long narrow flux tube terminating on a solid surface. The ion flow velocity along a magnetic field line can be equal to or greater than sonic at the entrance of a Debye sheath or upstream in the presheath. This paper presents a numerical study of the transition between subsonic and supersonics flows. A quasineutral one-dimensional (1D) fluid code has been used for modeling of plasma transport in the SOL along magnetic field lines, both in steady state and under transient conditions. The model uses coupled equations for continuity, momentum, and energy balance with ionization, radiation, charge exchange, and recombination processes. The recycled neutrals are described in the diffusion approximation. Standard Bohm sheath criterion is used as boundary conditions at the material surface. Three conditions conducive for the generation of supersonic flows in SOL plasmas have been explored. It is found that in steady state high (attached) and low (detached) divertor temperatures cases, the role of particle, momentum, and energy loss is critical. For attached case, the appearance of shock waves in the divertor region if the incoming plasma flow is supersonic and its effect on impurity retention is presented. In the third case, plasma expansion along the magnetic field can yield time-dependent supersonic solutions in the quasineutral rarefaction wave. Such situations can arise in the parallel transport of intermittent structures such as blobs and edge localized mode filaments along field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1952

Effect of Various Blade Modifications in Performance of a 16-Stage Axial-flow Compressor. IV - Effect on Over-all Performance Characteristics of Decreasing Twelfth through Fifteenth Stage Stator-blade Angles 3 deg and Increasing Stator Angles in the Inlet Stages

The performance of a 16-stage axial-flow compressor, in which two modifications of unloaded inlet stages were combined with loaded exit stages, has been determined. In the first modification the exit stages were loaded by decreasing the twelfth through fifteenth stage stator angles 3 deg. as compared with the blade angles in the original compressor, and the inlet stages were unloaded by increasing the blade angles the following amounts: guide vanes and first-stage stator, 6 deg; second- and third-stage stators, 4 deg.; and fourth-stage stators, 3 deg. The over-all performance of this configuration was compared with that of the compressor with the original blade angles. The peak efficiency was increased at all speeds below design and the weight flow was higher at speeds below 80 percent of design, the same at 80 percent of design, and lower at speeds abovce 80 percent of design. The maximum reduction in weight flow occurred at design speed. The surge limit line was higher at speeds between 75 and 90 percent of design when presented on a pressure ratio against weight flow basis. The second configuration was the same as the first with the exception that the second-, third-, and fourth-stage stator blade angles were the same as in the compressor with the original blade angles. A comparison of the performance of this configuration with that of the compressor with the original blade angles showed the same general trends of changes in performance as the first configuration. Comparisons were made of compressor configurations to show the effects upon the performance of decreased loading in the inlet stages. Below 75 percent of design speed, decreased loading results in increased weight flow and peak efficiency; above 80 percent of design speed, decreased loading in the inlet stages results in decreased weight flow and small changes in peak efficiencies. Between 75 and 90 percent of design the changes in surge weight flow and pressure ratio were such that the surge limit line was raised with decreased loading in the inlet stages when presented as pressure ratio against weight flow.

Hatch, James E.↗
NASA NTRS2011

Radiation Modeling for the Reentry of the Hayabusa Sample Return Capsule

Predicted shock-layer emission signatures of the Japanese Hayabusa capsule during its reentry are presented for comparison with flight measurements made during an airborne observation mission using NASA s DC-8 Airborne Laboratory. For each altitude, lines of sight were extracted from flow field solutions computed using an inhouse high-fidelity CFD code, DPLR, at 11 points along the flight trajectory of the capsule. These lines of sight were used as inputs for the line-by-line radiation code NEQAIR, and emission spectra of the air plasma were computed in the wavelength range from 300 nm to 1600 nm, a range which covers all of the different experiments onboard the DC-8. In addition, the computed flow field solutions were post-processed with the material thermal response code FIAT, and the resulting surface temperatures of the heat shield were used to generate thermal emission spectra based on Planck radiation. Both spectra were summed and integrated over the flow field. The resulting emission at each trajectory point was propagated to the DC-8 position and transformed into incident irradiance. Comparisons with experimental data are shown.

Winter, Michael W.↗
NASA NTRS1982

Conversion of acoustic energy by lossless liners

The Blokhintzev acoustic energy equation is applied to a two-dimensional duct containing a uniform flow with a finite length lining. It is shown that the difference of the incident and outgoing acoustic energy differs in general from the energy dissipated in the liner, the difference being related to the displacements at the liner's edges. It is shown that in the case of a locally reacting lossless liner for frequencies below the first cut-off frequency and for low Mach number acoustic energy is generated if the flow and the incident sound wave are in the same direction and is absorbed if these two directions are opposite unless special edge conditions are met. Furthermore it is shown under the same conditions that the ratio of the reflection coefficient at finite flow velocity to the reflection coefficient at vanishing velocity is to first order in Mach number independent of the liner characteristics. A numerical calculation confirms these predictions at least for mass-like linear admittance.

Moehring, W.↗
NASA NTRS2010

Multiple Velocity Profile Measurements in Hypersonic Flows Using Sequentially-Imaged Fluorescence Tagging

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to perform velocity measurements in hypersonic flows by generating multiple tagged lines which fluoresce as they convect downstream. For each laser pulse, a single interline, progressive scan intensified CCD (charge-coupled device) camera was used to obtain two sequential images of the NO molecules that had been tagged by the laser. The CCD configuration allowed for sub-microsecond acquisition of both images, resulting in sub-microsecond temporal resolution as well as sub-mm spatial resolution (0.5-mm horizontal, 0.7-mm vertical). Determination of axial velocity was made by application of a cross-correlation analysis of the horizontal shift of individual tagged lines. A numerical study of measured velocity error due to a uniform and linearly-varying collisional rate distribution was performed. Quantification of systematic errors, the contribution of gating/exposure duration errors, and the influence of collision rate on temporal uncertainty were made. Quantification of the spatial uncertainty depended upon the signal-to-noise ratio of the acquired profiles. This velocity measurement technique has been demonstrated for two hypersonic flow experiments: (1) a reaction control system (RCS) jet on an Orion Crew Exploration Vehicle (CEV) wind tunnel model and (2) a 10-degree half-angle wedge containing a 2-mm tall, 4-mm wide cylindrical boundary layer trip. The experiments were performed at the NASA Langley Research Center's 31-Inch Mach 10 Air Tunnel.

Bathel, Brett F.↗
DOE OSTI2025

Investigation of boron powder flow rates on real-time wall

The limit of boron flow rates for real-time conditioning of the first walls has been systematically investigated in the Experimental Advanced Superconducting Tokamak (EAST) with a full metal wall. Initially, solid boron injection demonstrated effective control over carbon impurities and deuterium recycling on the basis of pre-discharge boronization. A minimum flow rate, identified between 1.0 mg/s and 2.0 mg/s, was necessary for actively improving wall conditions under specific plasma operating scenarios, with this effect progressively enhancing as boron flow rates increased. Additionally, a maximum flow rate, estimated between 3.5 mg/s and 8.0 mg/s, was identified for these plasma conditions. When boron flow rates exceeded this maximum, boron-induced fueling effects influenced the plasma line-averaged density, and at excessively high flow rates, plasma disruption was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Vortices at the magnetic equator generated by hybrid Alfvén resonant waves

We performed three-dimensional magnetohydrodynamic simulations of shear Alfvén waves in a full field line system with magnetosphere-ionosphere coupling and plasma non-uniformities. Feedback instability of the Alfvén resonant modes showed various nonlinear features under the field line cavities: (i) a secondary flow shear instability occurs at the magnetic equator, (ii) trapping of the ionospheric Alfvén resonant modes facilitates deformation of field-aligned current structures, and (iii) hybrid Alfvén resonant modes grow to cause vortices and magnetic oscillations around the magnetic equator. Essential features in the initial brightening of auroral arc at substorm onsets could be explained by the dynamics of Alfvén resonant modes, which are the nature of the field line system responding to a background rapid change.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1977

Transmission of sound through nonuniform circular ducts with compressible mean flows

An acoustic theory is developed to determine the sound transmission and attenuation through an infinite, hard-walled or lined, circular duct carrying compressible, sheared, mean flows and having a variable cross section. The theory is applicable to large as well as small axial variations, as long as the mean flow does not separate. Although the theory is described for circular ducts, it is applicable to other duct configurations - annular, two dimensional, and rectangular. The theory is described for the linear problem, but the technique is general and has the advantage of being applicable to the nonlinear case as well as the linear case. The technique is based on solving for the envelopes of the quasi-parallel acoustic modes that exist in the duct instead of solving for the actual wave. A computer program was developed. The mean flow model consists of a one dimensional flow in the core and a quarter-sine profile in the boundary layer. Results are presented for the reflection and transmission coefficients in ducts with varying slopes and carrying different mean flows.

Nayfeh, A. H.↗
NASA NTRS1979

A wave-envelope of sound propagation in nonuniform circular ducts with compressible mean flows

An acoustic theory is developed to determine the sound transmission and attenuation through an infinite, hard-walled or lined circular duct carrying compressible, sheared, mean flows and having a variable cross section. The theory is applicable to large as well as small axial variations, as long as the mean flow does not separate. The technique is based on solving for the envelopes of the quasi-parallel acoustic modes that exist in the duct instead of solving for the actual wave, thereby reducing the computation time and the round-off error encountered in purely numerical techniques. The solution recovers the solution based on the method of multiple scales for slowly varying duct geometry. A computer program was developed based on the wave-envelope analysis for general mean flows. Results are presented for the reflection and transmission coefficients as well as the acoustic pressure distributions for a number of conditions: both straight and variable area ducts with and without liners and mean flows from very low to high subsonic speeds are considered.

Nayfeh, A. H.↗
NASA NTRS1980

Transmission of sound through nonuniform circular ducts with compressible mean flows

An acoustic theory is developed to determine the sound transmission and attenuation through an infinite hard-walled or lined circular duct carrying compressible, sheared mean flows and having a variable cross section. The theory is applicable to large as well as small axial variations, as long as the mean flow does not separate. The technique is based on solving for the envelopes of the quasi-parallel acoustic modes that exist in the duct instead of solving for the actual wave, thereby reducing the computation time and the round-off error encountered in purely numerical techniques. A number of test cases that demonstrate the flexibility of the program are included. Convergence of the transmission coefficients and the acoustic pressure profiles with an increasing number of modes is illustrated.

Nayfeh, A. H.↗
NASA NTRS1989

Can cool loop flows explain 'transition region' redshifts?

Observations of solar active regions reveal extensive areas of redshifted emission lines in the extreme ultraviolet, indicative of down flowing plasma. Redshifts are seen also in the magnetic network of the quiet sun and in magnetically active stars. The inferred velocities are large and appear to represent steady flows. Redshifts are not observed at higher coronal temperatures. It is shown here that steady flow in 'cool' loops driven by the buoyancy force set up by a small heating asymmetry between the two legs of the loop, offers a possible theoretical explanation of the observed features.

Mcclymont, Alexander N.↗
NASA NTRS2013

Marshall Team Complete Testing for Lunar Atmosphere and Dust Environment Explorer

Dr. Huu Trinh and his team with the Propulsion Systems and Test Departments at Marshall Space Flight Center in Huntsville, Ala. successfully complete a simulated cold-flow test series on the propulsion system used for the Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft. NASA Ames Research Center, Moffett Field, Calif., is leading NASA s work on the development of the LADEE spacecraft, and the Marshall center is the program office for the project. The spacecraft, scheduled for launch this fall, will orbit the Moon and gather information about the lunar atmosphere, conditions near the surface of the Moon, and collect samples of lunar dust. A thorough understanding of these characteristics will address long-standing unknowns, and help scientists understand other planetary bodies as well. The test team at the Marshall center conducted the cold flow test to identify how the fluid flows through the propulsion system feed lines, especially during critical operation modes. The test data will be used to assist the LADEE team in identifying any potential flow issues in the propulsion system, and allow them to address and correct them in advance of the launch.

Swofford, Philip↗
NASA NTRS1992

Acoustic modes in fluid networks

Pressure and flow rate eigenvalue problems for one-dimensional flow of a fluid in a network of pipes are derived from the familiar transmission line equations. These equations are linearized by assuming small velocity and pressure oscillations about mean flow conditions. It is shown that the flow rate eigenvalues are the same as the pressure eigenvalues and the relationship between line pressure modes and flow rate modes is established. A volume at the end of each branch is employed which allows any combination of boundary conditions, from open to closed, to be used. The Jacobi iterative method is used to compute undamped natural frequencies and associated pressure/flow modes. Several numerical examples are presented which include acoustic modes for the Helium Supply System of the Space Shuttle Orbiter Main Propulsion System. It should be noted that the method presented herein can be applied to any one-dimensional acoustic system involving an arbitrary number of branches.

Michalopoulos, C. D.↗
NASA NTRS1971

Effect of several porous casing treatments on stall limit and on overall performance of an axial flow compressor rotor

Several geometrically different porous casings were tested with an axial-flow compressor rotor to determine their effects upon the rotor stall-limit line and overall performance. The tests were conducted using both uniform and nonuniform inlet-flow conditions. The rotor performance with the various casing treatments is compared with that obtained with a solid casing. The ability of the various casing treatments to displace the rotor stall-limit line to lower weight flows was observed. Significant stall-margin increases were obtained with several of the porous casings. Peak efficiencies with two of the porous casings were as high as or slightly higher than that obtained with solid casing.

Osborn, W. M.↗
NASA NTRS1978

C III density diagnostics in nonequilibrium plasmas

Mass flow through a temperature gradient can produce substantial departures of the ionization states from their equilibrium values and can change the character of line emission. The effect of such flows on extreme ultraviolet intensities in the solar atmosphere is evaluated for the beryllium-sequence ion C III, which is an easily observed and powerful diagnostic of electron density in a collisionally dominated plasma. A downflow of material in a transition region can lead to an underestimate of the electron density; outflow of material, as in a stellar or solar wind passing from chromospheric to coronal temperatures, yields a reliable density diagnostic. Ambiguities in the analysis of ultraviolet emission lines can be circumvented by measurement of several transitions.

Raymond, J. C.↗
NASA NTRS1987

The microstructure and tensile properties of extruded melt-spun ribbons of iron-rich B2 FeAl

The microstructure of extruded rods of iron-rich FeAl(B2-structure), as characterized by TEM, SEM, optical microscopy and x-ray diffractometry, consisted of elongated grains with a 111-line fibre texture containing a high dislocation density. Numerous oxide particles were found, mostly in lines which reflected the matrix flow during extrusion. In addition, some large inclusions were present. Tensile testing of annealed, relatively dislocation-free specimens as a function of increasing temperature found increasing ductility up to 900K, above which a ductility drop occurred accompanied by a change in fracture mode, from transgranular cleavage to intergranular fracture. The yield strength, which was independent of temperature up to 800K (at about 500MPa), also decreased rapidly as diffusion became more important. The predominant slip vector changed from 111-line to 100-line around 700K.

Baker, I.↗
NASA NTRS1994

The 1992/93 eclipse of 31 Cygni

Extensive new ultraviolet and optical spectra of an atmospheric eclipse define the physical properties throughout the wind and chromosphere of 31 Cyg. These data require mass loss of approximately 3 x 10(exp -8) solar masses/yr in a wind that may merge smoothly into the chromosphere. Considerations of how energy is injected into the wind, however, suggest that the chromosphere and wind are separate structures. Most, if not all, of the velocity structure in metallic lines, which we have heretofore simulated with Doppler widths in the range 15-25 km/s, results from differential expansion of the atmosphere. Electron densities in the inner R(sub star) of the chromosphere are in the range 1.5 x 10(exp 9) - 2 x 10(exp 8)/cu cm, which implies clumping of the gas. The ionization of oxygen and nitrogen is consistent with clumping by factors of 3-30 in the outer chromosphere, roughly the amount required to give enough gas pressure to support the chromosphere. Chromospheric gas in 31 Cyg becomes hotter with increasing height, thus with decreasing optical depth, in a way that seems similar for all the zeta Aur binaries. Excitation temperature for Fe II in 1992/93 rises from about 5000 K at the deepest points sampled to about 12,500 K high in the wind. Strengths of violet Balmer lines give an excitation temperature for hydrogen of 6200-6500 K above a radial mass column density of approximately 0.01 g/sq cm. This amount of excitation implies that Lyman-alpha is thermalized beneath about 4 x 10(exp -3) g/sq cm. The outer atmosphere was symmetrical to within a factor of 2 in 1992/93, although it was clearly variable at this level, and it had similar mass column densities as in 1982. One manifestation of the variability was a flow toward the B star at phases 0.013-0.022 spanning velocities 45-100 km/s. Several lines of evidence point to a complicated and variable ionization in the wind: At large distance from the K star, measured mass column densities are less by up to a factor of 3 than required by a smoothly flowing wind. Also, much of the gas beyond r = 350 solar radii = 1.75 R(sub star) has a negative radial velocity. Radial velocities of the shell lines imply the outer atmosphere rotates in the direction of orbital motion, possibly through the deflection of wind flow lines in this direction.

Eaton, Joel A.↗
DOE OSTI2015

Mathematical modeling to validate on-line CO 2 measurements as a metric for cellulolytic biofilm activity in continuous-flow bioreactors

A mathematical model for the growth of thin Clostridium thermocellum biofilms on cellulose sheets with penetration from the surface into the interior fiber matrix is formulated in this paper, and used to assess the potential of CO 2 on-line measurements for activity of cellulolytic biofilms. The biofilm growth model is linked to a product formation model. It includes the processes of carbon substrate consumption, biofilm growth, biofilm upkeep, and carbon dioxide production. The mathematical description leads to a system of ordinary differential equations that is simple enough to lend itself to qualitative analysis, yet complex enough to capture the essential features of the system. Numerical fitting of the model against experimental data showed excellent quantitative agreement. Finally, the model substantiates the utility of on-line CO 2 measurements as indicator of cellulose substrate colonization and consumption, which may be useful for reporting bioreactor performance.

59 BASIC BIOLOGICAL SCIENCES↗