Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fixed orbits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Simulating flight boundary conditions for orbiter payload modal survey

An approach to simulate the characteristics of the payload/orbiter interfaces for the payload modal survey was developed. The flexure designed for this approach is required to provide adequate stiffness separation in the free and constrained interface degrees of freedom to closely resemble the flight boundary condition. Payloads will behave linearly and demonstrate similar modal effective mass distribution and load path as the flight if the flexure fixture is used for the payload modal survey. The potential non-linearities caused by the trunnion slippage during the conventional fixed base modal survey may be eliminated. Consequently, the effort to correlate the test and analysis models can be significantly reduced. An example is given to illustrate the selection and the sensitivity of the flexure stiffness. The advantages of using flexure fixtures for the modal survey and for the analytical model verification are also demonstrated.

Chung, Y. T.↗

Study of eclipsing binary and multiple systems in ob associations. II. The cygnus ob region: V443 Cyg, V456 Cyg, and V2107 Cyg

Three presumably young eclipsing binary systems in the direction of the Cygnus OB1, OB3, and OB9 associations are studied. Component spectra are reconstructed and their orbits are determined using light curves and spectra disentangling techniques. V443 Cyg and V456 Cyg have circular orbits while the light curve of V2107 Cyg imposes a slightly eccentric orbit (e = 0.045 ± 0.03). V443 Cyg harbors F-type stars, not young early-A stars as previously suggested in the literature based solely on photometry. It appears to be situated in the foreground (distance 0.6 ± 0.2 kpc) of the young stellar populations in Cygnus. V456 Cyg, at a distance of 0.50 ± 0.03 kpc, consists of a slightly metal-weak A-type star and an early-F star. The age of both systems, on or very near to the main sequence, remains uncertain by an order of magnitude. V2107 Cyg is a more massive system (8.9 ± 2 and 4.5 ± 1.2 M {sub ☉}) at 1.5 ± 0.5 kpc and, also kinematically, a strong candidate-member of Cyg OB1. The more massive component is slightly evolved and appears to undergo non-radial βCep-type pulsations. The Doppler signal of the secondary is barely detectable. A more extensive, asteroseismological study is necessary to fix masses more precisely. Nevertheless, the position of the primary in the H-R diagram confines the age reasonably well to 20 ± 5 Myr, indicating that for Cyg OB1 has a similar extent of star formation history as that established for Cyg OB2.

79 ASTRONOMY AND ASTROPHYSICS↗

A Review of Nonscaling CW FFAs for Proton and Ion Therapy Applications

Significant progress on compact, variable-energy versions of non-scaling fixed field accelerators with alternating strong-focusing gradients (nsFFA) has been made and adapted to proton and ion therapy. Not only has isochronous (CW) capability been demonstrated in a realizable design, an isochronous racetrack format has evolved which supports lengthy, synchrotron-like straight sections. Long straight insertions promote low-loss injection and extraction systems and further facilitate extracting lower-energy orbits using a bipolar bump-magnet system. To efficiently extract variable energy using this method, the accelerator complex requires separated accelerator stages, each stage with limited but therapeutically optimized energy ranges targeting specific cancer types and penetration depths. Different energy stages further support multiple treatment rooms increasing patient throughput and reducing treatment cost. The staged system proposed here also realizes cost savings in gantries by tailoring delivery to different therapeutic energies and beam requirements, promoting the requirement for only one high-energy gantry in the facility. The proposed facility consists of 3 stages, a 30 MeV injector, a 30 - 90 MeV/nucleon FFA for shallow cancers, and 90 - 250/330 MeV/nucleon stage for deep tumors, pelvis for example. The higher energy of the final stage, 330 MeV/nucleon is preferred to support Proton Computed Tomography. Isochronous FFA stages can be designed to accelerate either protons or ions with charge to mass of 1/2.

43 PARTICLE ACCELERATORS↗

Magnetic phase diagram of a two-orbital model for bilayer nickelates with varying doping

Motivated by the recently discovered high-T c bilayer nickelate superconductor La 3⁢ Ni 2 ⁢O 7 , we comprehensively research a bilayer 2×2×2 cluster for different electronic densities n by using the Lanczos method. We also employ the random-phase approximation to quantify the first magnetic instability with increasing Hubbard coupling strength, also varying n. Based on the spin structure factor S(q), we have obtained a rich magnetic phase diagram in the plane defined by n and U/W, at fixed Hund coupling, where U is the Hubbard strength and W the bandwidth. We have observed numerous states, such as A-AFM, Stripes, G-AFM, and C-AFM. At half-filling, n=2 (two electrons per Ni site, corresponding to N=16 electrons), the canonical superexchange interaction leads to a robust G-AFM state (π,π,π) with antiferromagnetic couplings both in-plane and between layers. By increasing or decreasing electronic densities, ferromagnetic tendencies emerge from the “half-empty” and “half-full” mechanisms, leading to many other interesting magnetic tendencies. In addition, the spin-spin correlations become weaker both in the hole or electron doping regions compared with half-filling. At n=1.5 (or N=12), density corresponding to La 3 ⁢Ni 2 ⁢O 7 , we obtained the “Stripe 2” ground state (antiferromagnetic coupling in one in-plane direction, ferromagnetic coupling in the other, and antiferromagnetic coupling along the z axis) in the 2×2×2 cluster. In addition, we obtained a much stronger AFM coupling along the z axis than the magnetic coupling in the xy plane. The random-phase approximation calculations with varying n give very similar results as Lanczos, even though both techniques are based on quite different procedures. Additionally, a state with q/π=(0.6,0.6,1) close to the E-phase wavevector is found in our RPA calculations by slightly reducing the filling to n=1.25, possibly responsible for the E-phase SDW recently observed in experiments. In conclusion, our predictions can be tested by chemically doping La 3 ⁢Ni 2 ⁢O 7 .

36 MATERIALS SCIENCE↗

Transversity from First Principles in QCD

Transversity observables, such as the T-odd Sivers single-spin asymmetry measured in deep inelastic lepton scattering on polarized protons and the distributions which are measured in deeply virtual Compton scattering, provide important constraints on the fundamental quark and gluon structure of the proton. In this talk I discuss the challenge of computing these observables from first principles; i.e.; quantum chromodynamics, itself. A key step is the determination of the frame-independent light-front wavefunctions (LFWFs) of hadrons - the QCD eigensolutions which are analogs of the Schroedinger wavefunctions of atomic physics. The lensing effects of initial-state and final-state interactions, acting on LFWFs with different orbital angular momentum, lead to T-odd transversity observables such as the Sivers, Collins, and Boer-Mulders distributions. The lensing effect also leads to leading-twist phenomena which break leading-twist factorization such as the breakdown of the Lam-Tung relation in Drell-Yan reactions. A similar rescattering mechanism also leads to diffractive deep inelastic scattering, as well as nuclear shadowing and non-universal antishadowing. It is thus important to distinguish 'static' structure functions, the probability distributions computed the target hadron's light-front wavefunctions, versus 'dynamical' structure functions which include the effects of initial- and final-state rescattering. I also discuss related effects such as the J = 0 fixed pole contribution which appears in the real part of the virtual Compton amplitude. AdS/QCD, together with 'Light-Front Holography', provides a simple Lorentz-invariant color-confining approximation to QCD which is successful in accounting for light-quark meson and baryon spectroscopy as well as hadronic LFWFs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A simulation to study the feasibility of improving the temporal resolution of LAGEOS geodynamic solutions by using a sequential process noise filter

A key drawback to estimating geodetic and geodynamic parameters over time based on satellite laser ranging (SLR) observations is the inability to accurately model all the forces acting on the satellite. Errors associated with the observations and the measurement model can detract from the estimates as well. These 'model errors' corrupt the solutions obtained from the satellite orbit determination process. Dynamical models for satellite motion utilize known geophysical parameters to mathematically detail the forces acting on the satellite. However, these parameters, while estimated as constants, vary over time. These temporal variations must be accounted for in some fashion to maintain meaningful solutions. The primary goal of this study is to analyze the feasibility of using a sequential process noise filter for estimating geodynamic parameters over time from the Laser Geodynamics Satellite (LAGEOS) SLR data. This evaluation is achieved by first simulating a sequence of realistic LAGEOS laser ranging observations. These observations are generated using models with known temporal variations in several geodynamic parameters (along track drag and the J(sub 2), J(sub 3), J(sub 4), and J(sub 5) geopotential coefficients). A standard (non-stochastic) filter and a stochastic process noise filter are then utilized to estimate the model parameters from the simulated observations. The standard non-stochastic filter estimates these parameters as constants over consecutive fixed time intervals. Thus, the resulting solutions contain constant estimates of parameters that vary in time which limits the temporal resolution and accuracy of the solution. The stochastic process noise filter estimates these parameters as correlated process noise variables. As a result, the stochastic process noise filter has the potential to estimate the temporal variations more accurately since the constraint of estimating the parameters as constants is eliminated. A comparison of the temporal resolution of solutions obtained from standard sequential filtering methods and process noise sequential filtering methods shows that the accuracy is significantly improved using process noise. The results show that the positional accuracy of the orbit is improved as well. The temporal resolution of the resulting solutions are detailed, and conclusions drawn about the results. Benefits and drawbacks of using process noise filtering in this type of scenario are also identified.

Hartman, Brian Davis↗

Analyses of shuttle orbiter approach and landing conditions

A study of one shuttle orbiter approach and landing conditions are summarized. Causes of observed PIO like flight deficiencies are identified and potential cures are examined. Closed loop pilot/vehicle analyses are described and path/attitude stability boundaries defined. The latter novel technique proved of great value in delineating and illustrating the basic causes of this multiloop pilot control problem. The analytical results are shown to be consistent with flight test and fixed base simulation. Conclusions are drawn relating to possible improvements of the shuttle orbiter/digital flight control system.

Teper, G. L.↗

Artificial or variable gravity attained by tether systems

The simplest orbiting tethered system demands for stability that the mass centers of two end bodies be displaced above and below the position of zero acceleration. Therefore, the contents of the end bodies are subjected necessarily to acceleration fields or artificial gravity whose magnitudes depend on the dimensions and masses of the system. If the length of the tether changes, so do the fields. Even for a fixed tether length, the acceleration field at a location in the system may be somewhat variable unless special means are employed to maintain a constant value. These fundamental properties of a tethered system can be used to advantage if small or variable acceleration fields are desired for experimental or operational reasons. This potential use involves a few expressions from a formulation of tether system dynamics. Some of these formulae were collected for convenient use. Two and three body tethered equilibrium equations are explained. A special application of acceleration field control using a tether system is attainment of near-zero gravity. In this applicaition, even small variations about zero become a critical matter.

Lundquist, C. A.↗

Separation dynamics of the COMET FreeFlyer and an upper stage STAR-48V motor

In this report, the orbital separation between a STAR-48V upperstage motor and the COMET FreeFlyer is investigated. The time from nominal STAR-48 engine burnout is to be determined such that the STAR-48 will not collide with the FreeFlyer once the separation process has been initiated. To analyze this separation, the forces acting upon both the FreeFlyer and the STAR-48 are described in a body fixed coordinate system. These coordinates are then transformed into an Euler coordinate system and then further transformed into a relative inertial coordinate system. From this analysis and some basic assumptions about the Star-48/FreeFlyer vehicle, it can be concluded that the STAR-48 will not collide with the Free Flyer if the separation occurs at 120 seconds after nominal burnout of the STAR-48. In fact, the separation delay could be a shorter period of time, but it is recommended that this separation delay be as long as possible for risk mitigation. This delay is currently designed to be 120 seconds and the analysis presented in this report shows that this time is acceptable.

Fuller, Kevin M.↗

The Ellipso (TM) mobile satellite system

The Ellipso(trademark) Mobile Satellite System is conceived to extend telecommunication services throughout the world to users that are not well, or not at all served by existing mobile or fixed telephone systems. Unlike cellular telephones, Ellipso(trademark) offers fully nationwide service to every served country, thereby providing service to users located anywhere within the national boundaries, no matter how isolated or remote. With Ellipso(trademark), a user in the middle of a wilderness area will have the same mobile telecommunications service as a user in a major metropolitan area. Ellipso(trademark) uses medium earth orbiting (MEO) satellites and an efficient system design to reach its subscribers directly and at a price that is competitive with terrestrial telephone services. The subscriber only requires a clear view of a serving satellite to achieve a connection and to connect to anyone else served by the national telecommunications system. Subscribers within view of two or more satellites will benefit from Ellipso's(trademark) unique satellite diversity processing, using all available satellites simultaneously to optimize circuit quality.

Castiel, David↗

Hubble Space Telescope Magnetometer and Two-Gyro Control Law Design, Implementation, and On-Orbit Performance

For f i h years, the science mission of the Hubble Space Telescope (HST) required using at least three of six rate gyros for attitude control. In the past, HST has mitigated gyro hardware failures by replacement of the failed units through Space Shuttle Servicing Missions. Following the tragic loss of Space Shuttle Columbia on STS-107, the desire to have a safe haven for astronauts during missions has resulted in the cancellation of all planned maxu14 missions to HST. While a robotic servicing mission is being currently being planned, controlling with alternate sensors to replace failed gyros can extend the HST Science mission until the robotic mission can be performed and extend science at HST s end of life. A two-gym control law has been designed and implemented using magnetometers (Magnetic Sensing System - MSS), fixed head star trackers (FHSTs), and Fine Guidance Sensors (FGSs) to control vehicle rate about the missing gyro axis. The three aforementioned sensors are used in succession to reduce HST boresight jitter to less than 7 milli-arcseconds rms and attitude error to less than 10 milli-arcseconds prior to science imaging. The MSS and 2-Gyro (M2G) control law is used for large angle maneuvers and attitude control during earth occultation of FHSTs and FGSs. The Tracker and 2-Gyro (T2G) control law dampens M2G rates and corrects the majority of attitude error in preparation for guide star acquisition with the FGSs. The Fine Guidance Sensor and 2-Gyro (F2G) control law d a m p T2G rates and controls HST attitude during science imaging. This paper describes the M2G control law. Details of M2G algorithms are presented, including computation of the HST 3-axis attitude error estimate, design of the M2G control law, SISO hear stability analyses, and restrictions on operations to maintain the h d t h and safety requirement of a 10degree maximum attitude error. Results of simulations performed in HSTSIM, a high-fidelity non-linear time domain simulation, are presented to predict HST on-orbit performance in attitude hold and maneuver modes. Simulation results are compared to on-orbit data from M2G flight tests performed in November and December 2004 and February 2005. Flight telemetry, using a currently available third gyro, shows that HST attitude error with the new M2G control law is maintained below the 10-degree requirement, and attitude errors are under 2 degrees for 95% of the time.

Wirzburger, John H.↗

Reduced scaling formulation of CASPT2 analytical gradients using the supporting subspace method

We present a reduced scaling and exact reformulation of state specific complete active space second-order perturbation (CASPT2) analytical gradients in terms of the MP2 and Fock derivatives using the supporting subspace method. This work follows naturally from the supporting subspace formulation of the CASPT2 energy in terms of the MP2 energy using dressed orbitals and Fock builds. For a given active space configuration, the terms corresponding to the MP2-gradient can be evaluated with O(N5) operations, while the rest of the calculations can be computed with O(N3) operations using Fock builds, Fock gradients, and linear algebra. When tensor-hyper-contraction is applied simultaneously, the computational cost can be further reduced to O(N4) for a fixed active space size. The new formulation enables efficient implementation of CASPT2 analytical gradients by leveraging the existing graphical processing unit (GPU)-based MP2 and Fock routines. We present benchmark results that demonstrate the accuracy and performance of the new method. Example applications of the new method in ab initio molecular dynamics simulation and constrained geometry optimization are given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decay widths of ground-state and excited {Xi}{sub b} baryons in a nonrelativistic quark model

Decay processes of ground and excited bottom baryons are studied in the {sup 3}P{sub 0} nonrelativistic quark model with all model parameters fixed in the sector of light quarks. Using as an input the recent mass of {Xi}{sub b} and the theoretical masses of {Xi}{sub b}{sup *} and {Xi}{sub b}{sup '}, narrow decay widths are predicted for the ground-state bottom baryons {Xi}{sub b}{sup *} and {Xi}{sub b}{sup '}. The work predicts large decay widths, about 100 MeV for the {rho}-type orbital excitation states of {Xi}{sub b}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Planetary benchmarks

Design criteria and technology requirements for a system of radar reference devices to be fixed to the surfaces of the inner planets are discussed. Offshoot applications include the use of radar corner reflectors as landing beacons on the planetary surfaces and some deep space applications that may yield a greatly enhanced knowledge of the gravitational and electromagnetic structure of the solar system. Passive retroreflectors with dimensions of about 4 meters and weighing about 10 kg are feasible for use with orbiting radar at Venus and Mars. Earth-based observation of passive reflectors, however, would require very large and complex structures to be delivered to the surfaces. For Earth-based measurements, surface transponders offer a distinct advantage in accuracy over passive reflectors. A conceptual design for a high temperature transponder is presented. The design appears feasible for the Venus surface using existing electronics and power components.

Uphoff, C.↗

Spaceport Performance Measures

Spaceports have traditionally been characterized by performance measures associated with their site characteristics. Measures such as "Latitude" (proximity to the equator), "Azimuth" (range of available launch azimuths) and "Weather" (days of favorable weather) are commonly used to characterize a particular spaceport. However, other spaceport performance measures may now be of greater value. These measures can provide insight into areas of operational differences between competing spaceports and identify areas for improving the performance of spaceports. This paper suggests Figures of Merit (FOMs) for spaceport "Capacity" (number of potential launch opportunities per year and / or potential mass' to low earth orbit (LEO) per year); "Throughput" (actual mass to orbit per year compared to capacity); "Productivity" (labor effort hours per unit mass to orbit); "Energy Efficiency" (joules expended at spaceport per unit mass to orbit); "Carbon Footprint" tons CO2 per unit mass to orbit). Additional FOMS are investigated with regards to those areas of special interest to commercial launch operators, such as "Assignment Schedule" (days required for a binding assignment of a launch site from the spaceport); "Approval Schedule" (days to complete a range safety assessment leading to an approval or disapproval of a launch vehicle); "Affordability" (cost for a spaceport to assess a new launch vehicle); "Launch Affordability" (fixed range costs per launch); "Reconfigure Time" (hours to reconfigure the range from one vehicle's launch ready configuration to another vehicle's configuration); "Turn,Around Time" (minimum range hours required between launches of an identical type launch vehicle). Available or notional data is analyzed for the KSC/CCAFS area and other spaceports. Observations regarding progress over the past few decades are made. Areas where improvement are needed or indicated are suggested.

Finger, G. Wayne↗

Spin orbit torque in ferromagnet/topological-quantum-material heterostructures

The main objective of this proposal was to investigate the spin-orbital driven phenomena in topological insulator (TI)/ferromagnet (FM) or transition metal (TM) heterostructures. In particularly, we tried to utilize the spin-momentum locking properties on the surface of TIs to achieve ideal spin-orbit torques (SOTs). In practice, we found that the surface properties have been greatly modified, resulting in much more complicated magneto-transport behaviors than what is expected in SOT-driven magnetotransport. Through systematic and extended investigations, we start to unravel that the nonlinear magnetotransport properties, which was, in the past, mainly attributed to SOT-driven phenomena, can be used to infer the modification of the electronic band structures of TIs and spin textures in FMs which are closely related with charge-spin interconversion phenomena. Regarding the band structures In TIs, we find under electrostatic perturbations imposed by deposition of nonmagnetic TMs, the quantum well states formed on the surface of TIs develop substantial Rashba spin-splitting, which is detected as a bilinear magnetoresistance (BMR). Under magnetic perturbations, the nonlinear planar Hall effect (NPHE) in the topological surface states is greatly enhanced, possibly reflecting the modified surface band structure due to time-reversal symmetry breaking. In a double HM/FM heterostructure where the magnetic anisotropy can be robustly tuned, we observed second-harmonic Hall voltage responses corresponding to domain wall structures with fixed chirality, stabilized by interfacial Dzyaloshinskii–Moriya interaction (DMI). In addition, in the linear transport regime, we utilized inverse-SHE-induced anomalous Hall effect in Pt to probe the exchange bias on the surface of a doped magnetic insulator Tm 3 Fe 5 O 12 .

36 MATERIALS SCIENCE↗

Resampling technique to correct for the Doppler effect in a search for gravitational waves

The frequency of any gravitational-wave signal received from a spinning neutron star will appear Doppler-shifted by the Earth's rotation and orbital motion. This frequency shift must be compensated to recover the signal energy as a spectral monochromatic peak with a high signal-to-noise ratio. Generally the correction depends on the source's position in the sky, spin, and spin-down rate. Here we propose a method of applying a single correction to the data which is valid for all the emission frequencies at a fixed position in the sky and for a given spin-down rate. We advance or retard the antenna proper time by removing (or repeating) single samples of the digitized output signal to keep the effective receiver and source clocks in accurate synchronization. The method, which requires just a few lines of code and little computational effort, appears to be very effective for ''semitargeted'' searches, where the source direction is known but the emission frequency is not.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

EUV FEL light source based on energy recovery linac with on-orbit laser plasma injection

We report on a week-long study of a conceptual design of EUV FEL light source based on an energy recovery linac with on-orbit laser plasma accelerator injection scheme. We carried out this study during USPAS Summer 2023 session of Unifying Physics of Accelerators, Lasers and Plasma applying the art of inventiveness TRIZ. An ultrashort Ti-sapphire laser accelerates electron beams from a gas target with mean energy of 20 MeV, which are then ramped up to 1 GeV in a five-turn scheme with a series of fixed field alternating magnets and two superconducting RF cavities (100 MeV per cavity per turn). The electron beam is then bypassed to an undulator line optimized to generate EUV light of 13.5 nm at kW level in a single pass.

43 PARTICLE ACCELERATORS↗