Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distance scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Systematically Measuring Ultra-diffuse Galaxies (SMUDGes). V. The Complete SMUDGes Catalog and the Nature of Ultradiffuse Galaxies

We present the completed catalog of ultradiffuse galaxy (UDG) candidates (7070 objects) from our search of the DR9 Legacy Survey images, including distance and total mass estimates for 1529 and 1436 galaxies, respectively, that we provide and describe in detail. From the sample with estimated distances, we obtain a sample of 585 UDGs (μ 0, g ≥ 24 mag arcsec –2 and r e ≥ 1.5 kpc) over 20,000 square degrees of sky in various environments. We conclude that UDGs in our sample are limited to 10 10 ≲ M h /M ⊙ ≲ 10 11.5 and are on average a factor of 1.5–7 deficient in stars relative to the general population of galaxies of the same total mass. That factor increases with increasing galaxy size and mass up to a factor of ~10 when the total mass of the UDG increases beyond M h = 10 11 M ⊙ . We do not find evidence that this factor has a dependence on the UDGs large-scale environment.

79 ASTRONOMY AND ASTROPHYSICS↗

The Electromagnetic Characteristics of the Tianlai Cylindrical Pathfinder Array

A great challenge for 21 cm intensity mapping experiments is the strong foreground radiation which is orders of magnitude brighter than the 21 cm signal. Removal of the foreground takes advantage of the fact that its frequency spectrum is smooth while the redshifted 21 cm signal spectrum is stochastic. However, a complication is the non-smoothness of the instrument response. This paper describes the electromagnetic simulation of the Tianlai cylinder array, a pathfinder for 21 cm intensity mapping experiments. Due to the vast scales involved, a direct simulation requires a large amount of computing resources. We have made the simulation practical by using a combination of methods: first simulate a single feed, then an array of feed units, finally with the feed array and a cylindrical reflector together, obtain the response for a single cylinder. We studied its radiation pattern, bandpass response and the effects of mutual coupling between feed units, and compared the results with observation. Many features seen in the measurement result are reproduced well in the simulation, especially the oscillatory features which are associated with the standing waves on the reflector. The mutual coupling between feed units is quantified with S-parameters, which decrease as the distance between the two feeds increases. Based on the simulated S-parameters, we estimate the correlated noise which has been seen in the visibility data, and the results show very good agreement with the data in both magnitude and frequency structures. These results provide useful insights on the problem of 21 cm signal extraction for real instruments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cosmological perturbation theory for large scale structure in phase space

We develop a framework for Large Scale Structure (LSS) perturbation theory, that solves the Vlasov-Poisson system of equations for the distribution function in full phase space. This approach relaxes the usual apriori assumption of negligible velocity dispersion underlying the Standard Perturbation Theory (SPT). We apply the new method to rederive the usual SPT kernels up to third order in the perturbative expansion. We also show that a counterterm, identical to the one introduced by standard Effective Field Theory (EFT) methods, naturally arises within our framework. We finish by making a precise connection to EFT techniques, which reveals the necessity of the EFTofLSS to self-consistently model the long-wavelength fluid, and illustrates the importance of having theoretical control over short distance fluctuations.

Cosmological perturbation theory in GR and beyond↗

Tracing the Evolution of the Cool Gas in CGM and IGM Environments through Mg II Absorption from Redshift z = 0.75 to z = 1.65 Using DESI-Y1 Data

We present a measurement of the mean absorption of cool gas traced by Mg II (λλ2796, 2803) around emission line galaxies (ELGs), spanning spatial scales from 20 kpc to 10 Mpc. The measurement is based on crossmatching the positions ELGs at z = 0.75–1.65 and the metal absorption in the spectra of background quasars with data provided by the Year 1 sample of the Dark Energy Spectroscopic Instrument. The ELGs are divided into two redshift intervals: 0.75 < z < 1.0 and 1.0 < z < 1.65. We find that the composite quasar spectra constructed by stacking the ELG-QSO pairs evolve with redshift, with z > 1 having a systematically higher signal of Mg II absorption. Within 1 Mpc, the covering fraction of the cool gas at z > 1 is higher than that of z < 1. The enhancement becomes less apparent especially if the projected distance r p > 1 Mpc. ELGs with higher stellar mass and star formation rate (SFR) yield higher clustering of Mg ii absorbers at z < 1. For z > 1, the covering fractions with different SFRs show little difference. The higher Mg II absorption at higher redshift supports the observations of higher star formation at cosmic noon. Converting the Mg II absorbers to unsaturated Si II , our estimate indicates that the metal abundance of Si II ranges from 0.7 to 1.2 × 10 −6 from z = 0.9 to 1.3. The growth of low-ionization metal abundance strongly suggests a metal-enriched circumgalactic medium and an increased presence of cool gas in the intergalactic medium toward higher redshifts.

circumgalactic medium↗

Completeness of the NASA/IPAC Extragalactic Database (NED) Local Volume Sample

We introduce the NASA/IPAC Extragalactic Database (NED) Local Volume Sample (NED-LVS), a subset of ~1.9 million objects with distances out to 1000 Mpc. We use UV and IR fluxes available in NED from all-sky surveys to derive physical properties, and estimate the completeness relative to the expected local luminosity density. The completeness relative to near-IR luminosities (which traces a galaxy's stellar mass) is roughly 100% at D < 30 Mpc and remains moderate (70%) out to 300 Mpc. For brighter galaxies (≳L * ), NED-LVS is ~100% complete out to ~400 Mpc. When compared to other local Universe samples (GLADE and HECATE), all three are ~100% complete below 30 Mpc. At distances beyond ~80 Mpc, NED-LVS is more complete than both GLADE and HECATE by ~10%–20%. NED-LVS is the underlying sample for the NED gravitational-wave follow-up service (NED-GWF), which provides prioritized lists of host candidates for GW events within minutes of alerts issued by the LIGO–Virgo–KAGRA collaboration. We test the prioritization of galaxies in the volume of GW170817 by three physical properties, where we find that both stellar mass and inverse specific star formation rate place the correct host galaxy in the top 10. In addition, NED-LVS can be used for a wide variety of other astrophysical studies: galaxy evolution, star formation, large-scale structure, galaxy environments, and more. The data in NED are updated regularly, and NED-LVS will be updated concurrently. Consequently, NED-LVS will continue to provide an increasingly complete sample of galaxies for a multitude of astrophysical research areas for years to come.

79 ASTRONOMY AND ASTROPHYSICS↗

Tracking ion intercalation into layered Ti 3 C 2 MXene films across length scales

Enhancing the energy stored and power delivered by layered materials relies strongly on improved understanding of the intricate interplay of electrolyte ions, solvents, and electrode interactions as well as the role of confinement. Here we report a highly integrated study with multiscale theory/modelling and experiments to track the intercalation of aqueous Li + , Na + , K + , Cs + , and Mg 2+ ions into Ti 3 C 2 MXene. The integrated analysis of experiments assisted by theory/modelling allows for a deep understanding of energy storage processes highlighting the importance of the dynamics of cations, their positionings between MXene sheets, their effects on mechanical properties and capacitive energy storage. Computational simulations and operando calorimetry measurements prove the processes involving cation dehydration and H+ rehydration, showing a good correlation for heat variations between experiments and theory. Operando liquid AFM mapped energy dissipation of ions appears non-uniformly across the MXene surface, indicating heterogeneities of ions inside the MXene and confirming partially the ion behaviour obtained in theory. We directly demonstrate that the average distance between the cation and MXene surface follows a modified two-sided Helmholtz model when plotted versus the open circuit potential capacitance, revealing a different electrical double layer mechanism in confinement. This new fundamental understanding lays the foundation for improved functional devices utilizing electrodes and membranes made of two-dimensional materials.

36 MATERIALS SCIENCE↗

Spin-EPR-pair separation by conveyor-mode single electron shuttling in Si/SiGe

Long-ranged coherent qubit coupling is a missing function block for scaling up spin qubit based quantum computing solutions. Spin-coherent conveyor-mode electron-shuttling could enable spin quantum-chips with scalable and sparse qubit-architecture. Its key feature is the operation by only few easily tuneable input terminals and compatibility with industrial gate-fabrication. Single electron shuttling in conveyor-mode in a 420 nm long quantum bus has been demonstrated previously. Here we investigate the spin coherence during conveyor-mode shuttling by separation and rejoining an Einstein-Podolsky-Rosen (EPR) spin-pair. Compared to previous work we boost the shuttle velocity by a factor of 10000. We observe a rising spin-qubit dephasing time with the longer shuttle distances due to motional narrowing and estimate the spin-shuttle infidelity due to dephasing to be 0.7% for a total shuttle distance of nominal 560 nm. Shuttling several loops up to an accumulated distance of 3.36 μm, spin-entanglement of the EPR pair is still detectable, giving good perspective for our approach of a shuttle-based scalable quantum computing architecture in silicon.

42 ENGINEERING↗

JWST lensed quasar dark matter survey – I. Description and first results

ABSTRACT The flux ratios of gravitationally lensed quasars provide a powerful probe of the nature of dark matter. Importantly, these ratios are sensitive to small-scale structure, irrespective of the presence of baryons. This sensitivity may allow us to study the halo mass function even below the scales where galaxies form observable stars. For accurate measurements, it is essential that the quasar’s light is emitted from a physical region of the quasar with an angular scale of milliarcseconds or larger; this minimizes microlensing effects by stars within the deflector. The warm dust region of quasars fits this criterion, as it has parsec-size physical scales and dominates the spectral energy distribution of quasars at wavelengths greater than 10 μm. The JWST Mid-Infrared Instrument is adept at detecting redshifted light in this wavelength range, offering both the spatial resolution and sensitivity required for accurate gravitational lensing flux ratio measurements. Here, we introduce our survey designed to measure the warm dust flux ratios of 31 lensed quasars. We discuss the flux-ratio measurement technique and present results for the first target, DES J0405-3308. We find that we can measure the quasar warm dust flux ratios with 3 per cent precision. Our simulations suggest that this precision makes it feasible to detect the presence of 107 M⊙ dark matter haloes at cosmological distances. Such haloes are expected to be completely dark in cold dark matter models.

79 ASTRONOMY AND ASTROPHYSICS↗

Detector alignment for X-ray crystallography using Millepede-II

I describe a method for accurately refining the geometrical parameters of segmented X-ray area detectors on the basis of serial crystallography data, using 'Millepede' – an algorithm created for a very similar problem in high-energy physics. The Millepede method for serial crystallography builds on the approach of Brewster et al. [Acta Cryst. (2018), D74, 877–894], in which the detector parameters are refined simultaneously with the parameters for each individual crystal. This accounts for the mutual dependency between the parameters and thereby avoids the bias and slow convergence problems that have afflicted older approaches in which the deviations between observed and calculated Bragg peak positions were taken directly as the updates for the detector panel positions. The Millepede method uses the special structure of the least-squares normal equations to reduce them to a much smaller form that can be solved very quickly, even compared with the sparse matrix methods used previously. This makes it practical to refine the detector geometry frequently and thereby maintain accurate calibration without specialized alignment campaigns. Tilts of detector panels out of the plane can be reliably refined, as can the overall distance of the detector in the beam direction. With a simulated test case, the new method produced panel shifts within 7% of the correct values with only one iteration, and produced almost exactly correct shifts after a second iteration. A simulated out-of-plane panel rotation was correctly determined to within 0.001°. Applied to experimental data from an X-ray free-electron laser, the method increased the indexable fraction of frames from 30% to 91% in a single iteration, and to 96% after two further iterations. Computing the geometry updates on the basis of 2060 crystals took only 0.819 s on desktop computing hardware, including the time taken to read the required data from disk. The scaling was found to be very close to linear for up to 100 980 sets of crystal parameters, which took only 78.2 s to process under the same conditions. The method has been applied as part of a real-time feedback system at a synchrotron radiation beamline, in which an out-of-plane detector tilt of 0.04° was detected and corrected. Possible further applications are also described here.

Millepede-II↗

Foam Degradation Model during Thermal Hypothetical Accident Conditions

Current practice in Safety Analysis Report for Packaging (SARP) thermal analysis for hypothetical accident conditions (HAC) of packages is to not explicitly model the consequence to the foam impact limiting material, but instead to make conservative estimates of those consequences and begin calculations from that point. This approach is typically used for the foam regression distance, which is the thickness of the degraded foam layer after the 30-minute fire event. Estimates for regression distance can come directly from package burn test results or from correlations based on one-dimensional testing by the foam manufacturer. In either case, this is a subjective process, and although it can be used to produce a conservative result, it is a significant approximation in the analysis. This paper describes testing and refinement of a simplified foam regression model. Comparisons are made against available data from laboratory experiments. Model refinements were tested until satisfactory agreement was achieved. The final modeling approach was then compared with post-test inspection results from HAC burn test data. A new model with an effective thermal conductivity based on foam to char density variation was shown successful in representing laboratory-scale foam thermal degradation experiments and full-scale burn tests of a current package. This model offers a technically defensible and predictive approach for modeling thermal degradation of rigid polyurethane insulation in transport packages.

36 MATERIALS SCIENCE↗

Quantitative Representativeness and Constituency of the Long-Term Agroecosystem Research Network and Analysis of Complementarity with Existing Ecological Networks

Abstract Studies conducted at sites across ecological research networks usually strive to scale their results to larger areas, trying to reach conclusions that are valid throughout larger enclosing regions. Network representativeness and constituency can show how well conditions at sampling locations represent conditions also found elsewhere and can be used to help scale-up results over larger regions. Multivariate statistical methods have been used to design networks and select sites that optimize regional representation, thereby maximizing the value of datasets and research. However, in networks created from already established sites, an immediate challenge is to understand how well existing sites represent the range of environments in the whole area of interest. We performed an analysis to show how well sites in the USDA Long-Term Agroecosystem Research (LTAR) Network represent all agricultural working lands within the conterminous United States (CONUS). Our analysis of 18 LTAR sites, based on 15 climatic and edaphic characteristics, produced maps of representativeness and constituency. Representativeness of the LTAR sites was quantified through an exhaustive pairwise Euclidean distance calculation in multivariate space, between the locations of experiments within each LTAR site and every 1 km cell across the CONUS. Network representativeness is from the perspective of all CONUS locations, but we also considered the perspective from each LTAR site. For every LTAR site, we identified the region that is best represented by that particular site—its constituency—as the set of 1 km grid locations best represented by the environmental drivers at that particular LTAR site. Representativeness shows how well the combination of characteristics at each CONUS location was represented by the LTAR sites’ environments, while constituency shows which LTAR site was the closest match for each location. LTAR representativeness was good across most of the CONUS. Representativeness for croplands was higher than for grazinglands, probably because croplands have more specific environmental criteria. Constituencies resemble ecoregions but have their environmental conditions “centered” on those at particular existing LTAR sites. Constituency of LTAR sites can be used to prioritize the locations of experimental research at or even within particular sites, or to identify the extents that can likely be included when generalizing knowledge across larger regions of the CONUS. Sites with a large constituency have generalist environments, while those with smaller constituency areas have more specialized environmental combinations. These “specialist” sites are the best representatives for smaller, more unusual areas. The potential of sharing complementary sites from the Long-Term Ecological Research (LTER) Network and the National Ecological Observatory Network (NEON) to boost representativeness was also explored. LTAR network representativeness would benefit from borrowing several NEON sites and the Sevilleta LTER site. Later network additions must include such specialist sites that are targeted to represent unique missing environments. While this analysis exhaustively considered principal environmental characteristics related to production on working lands, we did not consider the focal agronomic systems under study, or their socio-economic context.

54 ENVIRONMENTAL SCIENCES↗

Influence of NaCl on shape deformation of polymersomes

Polymersomes frequently appear in the literature as promising candidates for a wide range of applications from targeted drug delivery to nanoreactors. From a cell mimetic point of view, it is important to understand the size and shape changes of the vesicles in the physiological environment since that can influence the drug delivery mechanism. In this work we studied the structural features of polymersomes consisting of poly(ethylene glycol)–poly(dimethylsiloxane)–poly(ethylene glycol) at the nanoscopic length scale in the presence of NaCl, which is a very common molecule in the biotic aqueous environment. Here, we used dynamic light scattering (DLS), cryo-TEM, small angle neutron scattering (SANS) and small angle X-ray scattering (SAXS). We observed transformation of polymersomes from spherical to elongated vesicles at low salt concentration and into multivesicular structures at high salt concentration. Model fitting analysis of SANS data indicated a reduction of vesicle radius up to 47% and from the SAXS data we observed an increase in membrane thickness up to 8% and an increase of the PDMS hydrophobic segment up to 11% indicating stretching of the membrane due to osmotic imbalance. Also, from the increase in the interlamellar repeat distance up to 98% under high salt concentrations, we concluded that the shape and structural changes observed in the polymersomes are a combined result of osmotic pressure change and ion–membrane interactions.

36 MATERIALS SCIENCE↗

Galaxy properties as revealed by MaNGA – III. Kinematic profiles and stellar population gradients in S0s

ABSTRACT This is the third paper of a series where we study the stellar population gradients (SP; ages, metallicities, α-element abundance ratios, and stellar initial mass functions) of early-type galaxies (ETGs) at $z$ ≤ 0.08 from the Mapping Nearby Galaxies at APO Data Release 15 (MaNGA-DR15) survey. In this work, we focus on the S0 population and quantify how the SP varies across the population as well as with galactocentric distance. We do this by measuring Lick indices and comparing them to SP synthesis models. This requires spectra with high signal-to-noise ratio which we achieve by stacking in bins of luminosity (Lr) and central velocity dispersion (σ0). We find that: (1) there is a bimodality in the S0 population: S0s more massive than $3\times 10^{10}\, \mathrm{M}_\odot$ show stronger velocity dispersion and age gradients (age and σr decrease outwards) but little or no metallicity gradient, while the less massive ones present relatively flat age and velocity dispersion profiles, but a significant metallicity gradient (i.e. [M/H] decreases outwards). Above $2\times 10^{11}\, \mathrm{M}_\odot$, the number of S0s drops sharply. These two mass scales are also where global scaling relations of ETGs change slope. (2) S0s have steeper velocity dispersion profiles than fast-rotating elliptical galaxies (E-FRs) of the same luminosity and velocity dispersion. The kinematic profiles and SP gradients of E-FRs are both more similar to those of slow-rotating ellipticals (E-SRs) than to S0s, suggesting that E-FRs are not simply S0s viewed face-on. (3) At fixed σ0, more luminous S0s and E-FRs are younger, more metal rich and less α-enhanced. Evidently for these galaxies, the usual statement that ‘massive galaxies are older’ is not true if σ0 is held fixed.

Domínguez Sánchez, H.↗

Renormalons and power corrections in pseudo- and quasi-GPDs

High-order behavior of the perturbative expansion for short-distance observables in QCD is intimately related to the contributions of small momenta in the corresponding Feynman diagrams and this correspondence provides one with a useful tool to investigate power-suppressed nonperturbative corrections. We use this technique to study the structure of power corrections to parton quasi- and pseudo-GPDs which are used in lattice calculations of generalized parton distributions. As the main result, we predict the functional dependence of the leading power corrections to quasi(pseudo)-GPDs on x variable for nonzero skewedness parameter ξ . The kinematic point x = ± ξ turns out to be special. We find that the nonperturbative corrections to quasi-GPDs at this point are suppressed by the first power of the hard scale only. These contributions come from soft momenta and have nothing to do with the known UV renormalon in the Wilson line. We also show that power corrections can be strongly suppressed by the normalization procedure. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Riverscape heterogeneity in estimated Chinook Salmon emergence phenology and implications for size and growth

Abstract Many salmonid‐bearing rivers exhibit thermal and hydrologic heterogeneity at multiple spatial and temporal scales, but how this translates into spatiotemporal patterns of fry emergence is poorly understood. Understanding this variability is important because emergence timing determines the biophysical conditions fish first experience (e.g., temperature, flow, and food supply), thereby influencing growth opportunities and survival during this critical life stage. We predicted spring Chinook Salmon ( Oncorhynchus tshawytscha ) emergence phenology across four northeastern Oregon subbasins over 5–9 years using empirical spawning and temperature data. We then related interannual emergence timing estimates to juvenile salmon size and growth rates at consistent sampling locations. There were clear longitudinal patterns of predicted emergence timing in each subbasin: The shape of these patterns was consistent among years, but not among subbasins. In two subbasins, emergence occurred progressively later with distance upstream, whereas in the other two subbasins emergence was earliest at upstream sites. Within each year, median emergence dates among sites within each subbasin ranged between 44 and 58 days. This spatial variation was comparable to interannual variation, with median emergence dates for a given location in each subbasin ranging between 47 and 74 days among years. Contrary to our expectations, juvenile salmon were not larger in years with earlier emergence, owing to slower estimated spring and summer growth rates compared to years with later emergence. Despite large interannual variation in estimated emergence dates, these results suggest that other factors (e.g., stream flow, temperature, and density‐dependence) were more important than growth duration in determining juvenile salmon growth rates and size among years. We demonstrated considerable spatial and interannual variation in emergence phenology within these subbasins. Understanding how this variation translates to spatiotemporal patterns of juvenile salmon habitat use, growth, and survival has important implications for guiding restoration efforts and understanding how climate change may impact these populations.

Kaylor, Matthew J.↗

Particle-number distribution in large fluctuations at the tip of branching random walks

Here, we investigate properties of the particle distribution near the tip of one-dimensional branching random walks at large times t , focusing on unusual realizations in which the rightmost lead particle is very far ahead of its expected position, but still within a distance smaller than the diffusion radius ~$\sqrt{t}$. Our approach consists in a study of the generating function $G_{Δx}(λ) = Σ_n$ ${λ^n}p_n(Δx)$ for the probabilities $p_n(Δx)$ of observing $\textit{n}$ particles in an interval of given size $Δ\textit{x}$ from the lead particle to its left, fixing the position of the latter. This generating function can be expressed with the help of functions solving the Fisher-Kolmogorov-Petrovsky-Piscounov (FKPP) equation with suitable initial conditions. In the infinite-time and large-$Δ\textit{x}$ limits, we find that the mean number of particles in the interval grows exponentially with $Δ\textit{x}$, and that the generating function obeys a nontrivial scaling law, depending on $Δ\textit{x}$ and λ through the combined variable $[Δx — f(λ)]^3 / Δx^2$, where $\textit{f}$(λ) ≡ – ln(1 – λ) – ln [– ln(1 – λ)]. From this property, one may conjecture that the growth of the typical particle number with the size of the interval is slower than exponential, but, surprisingly enough, only by a subleading factor at large Δ$\textit{x}$. The scaling we argue is consistent with results from a numerical integration of the FKPP equation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal Analysis of Large Area Additive Manufacturing Resistance Heating Composites for Out of Oven/Autoclave Applications

Additive Manufacturing (AM) of carbon fiber (CF) reinforced composite has received growing attention because of the design flexibility, superior mechanical properties, improved thermal properties, and weight reduction. Autoclave tooling was proven to be a successful application for large scale AM technology. The capital cost, and cost associated with heating, and cycle time in a conventional autoclave process is relatively high. Thus, an innovative design of AM mold with an efficient heating scheme is essential. This study represents an innovative method of the resistive heating of composite molds which does not require a room size oven for heating during the curing processing. Therefore, it has the potential to reduce the operating cost drastically. For the design validation and feasibility study, we performed a numerical analysis of the wire embedded and AM mold parts. The goal of this study is to determine and optimize the thermal behavior of the printed mold with embedded wire technology. It is anticipated that the larger distance between the embedded wires along the printing direction (z-direction) increase the cold spot, on the other hand, a close distance of the wire can create the unwanted localize heating, thus melting. Constant thermal properties of the 20 wt.% short CF reinforced acrylonitrile butadiene styrene (ABS) was used for the simulation purpose. Thermal characterization was set to 100°C to avoid the thermal deformation or bulging on the part surface.

billah, Kazi↗

Thermal Analysis of Large Area Additive Manufacturing Resistance Heating Composites for Out of Oven/Autoclave Applications

Additive Manufacturing (AM) of carbon fiber (CF) reinforced composite has received growing attention because of the design flexibility, superior mechanical properties, improved thermal properties, and weight reduction. Autoclave tooling was proven to be a successful application for large scale AM technology. The capital cost, and cost associated with heating, and cycle time in a conventional autoclave process is relatively high. Thus, an innovative design of AM mold with an efficient heating scheme is essential. This study represents an innovative method of the resistive heating of composite molds which does not require a room size oven for heating during the curing processing. Therefore, it has the potential to reduce the operating cost drastically. For the design validation and feasibility study, we performed a numerical analysis of the wire embedded and AM mold parts. The goal of this study is to determine and optimize the thermal behavior of the printed mold with embedded wire technology. It is anticipated that the larger distance between the embedded wires along the printing direction (z-direction) increase the cold spot, on the other hand, a close distance of the wire can create the unwanted localize heating, thus melting. Constant thermal properties of the 20 wt.% short CF reinforced acrylonitrile butadiene styrene (ABS) was used for the simulation purpose. Thermal characterization was set to 100°C to avoid the thermal deformation or bulging on the part surface.

billah, Kazi↗