Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “discrimination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Timber type separability in Southeastern United States on LANDSAT-1 MSS data

A quantitative, computer-aided study was made on the spectral separability of timber types and condition classes in the Southeastern United States, using LANDSAT-1 multispectral scanner data. It was concluded that LANDSAT-1 could be used effectively to discriminate the gross forest features of softwood, hardwood, and regeneration. The only significant detectable age difference would be between an established forest versus a young (or denuded) forest. The red or near infrared bands would be better for discrimination; phenological early and late spring data would be better than winter. And a temporal analysis would be superior to single-season analysis. Lastly, two spectral bands would be most cost effective for computer analysis. The study site was Sam Houston National Forest of East Texas, a typical forest in the Flatwoods Zone, Southern Region, U. S. Forest Service.

Kan, E. P.↗
NASA NTRS1976

Comparison of Skylab and LANDSAT images for geologic mapping in Northern Arizona

The author has identified the following significant results. It was found that based on resolution, the Skylab S190A products were superior to LANDSAT images. Based on measurements of shoreline features in Lake Mead S190A images had 1.5 - 3 times greater resolution than LANDSAT. In general, the higher resolution of the Skylab data yielded better discrimination among rock units, but in the case of structural features, lower sun angle LANDSAT images (50 deg) were superior to higher sun angle Skylab images (77 deg). The most valuable advantage of the Skylab over the LANDSAT image products is the capability of producing stereo images. Field spectral reflectance measurements on the Coconino Plateau were made in an effort to determine the best spectral band for discrimination of the six geologic units in question, and these bands were 1.3, 1.2, 1.0, and 0.5 microns. The EREP multispectral scanner yielded data with a low signal to noise ratio which limited its usefulness for image enhancement work. Sites that were studied in Arizona were Shivwits Plateau, Verde Valley, Coconino Plateau, and Red Lake. Thematic maps produced by the three classification algorithms analyzed were not as accurate as the maps produced by photointerpretation of composites of enhanced images.

Goetz, A. F. H.↗
NASA NTRS1976

Application of Skylab EREP data for land use management

The author has identified the following significant results. The 1.09-1.19 micron band proved to be very valuable for discriminating a variety of land use categories, including agriculture, forest, and urban classes. The 1.55-1.75 micron band proved very useful in combination with the 1.09-1.19 micron band. Misregistration between spectral bands, even by as little as 1/2 pixel, may degrade classification accuracy. Identification accuracy of boundary or border pixels was as much as 13% lower than the accuracy for identifying internal field pixels. The principal conclusion with respect to the S190B camera system is that the higher resolution of the S190B system in comparison to previous space photography (Gemini, Apollo), to the S190A system (Skylab), and to LANDSAT imagery significantly increases the range of additional discrimination achievable.

Simonett, D. S.↗
NASA NTRS1976

Geologic mapping using LANDSAT data

The feasibility of automated classification for lithologic mapping with LANDSAT digital data was evaluated using three classification algorithms. The two supervised algorithms analyzed, a linear discriminant analysis algorithm and a hybrid algorithm which incorporated the Parallelepiped algorithm and the Bayesian maximum likelihood function, were comparable in terms of accuracy; however, classification was only 50 per cent accurate. The linear discriminant analysis algorithm was three times as efficient as the hybrid approach. The unsupervised classification technique, which incorporated the CLUS algorithm, delineated the major lithologic boundaries and, in general, correctly classified the most prominent geologic units. The unsupervised algorithm was not as efficient nor as accurate as the supervised algorithms. Analysis of spectral data for the lithologic units in the 0.4 to 2.5 microns region indicated that a greater separability of the spectral signatures could be obtained using wavelength bands outside the region sensed by LANDSAT.

Siegal, B. S.↗
NASA NTRS1976

Application of LANDSAT-2 to the management of Delaware's marine and wetland resources

The author has identified the following significant results. Digital multispectral classification techniques can be used to discriminate coastal land use and vegetation with 87% to 94% categorization accuracy. Wetlands plant species, representing more detail than U.S.G.S. classification system level 2 categories can be discriminated using LANDSAT data with 85% to 88% accuracy at scales up to 1:24,000.

Klemas, V.↗
NASA NTRS1976

A photon counting array photometer using an intensified charge coupled device

An array photometer which uses an intensified charge coupled device was developed. This system, the University of Maryland Array Photometer (UMAP), has the ability to discriminate single photoelectron events in real time at a 4 Megahertz rate. The photosensor uses an S-20 photocathode and a Fairchild CCD202 with a 100 by 100 array of separate individual channels. The overall system has demonstrated a noise level which permits single photoelectron discrimination, a scan rate of 400 frames per second, a very linear response, and very low lag. The UMAP system has a very large dynamic range exceeding 10,000 in the photon counting mode. A special technique to extend the dynamic range to 1,000,000 was described. The performance parameters of this system, both in the laboratory and on the telescope were cited. Data from these observations were discussed to illustrate the system sensitivity, which is basically limited by the pixel size in the array, rather than the electrooptics.

Currie, D. G.↗
NASA NTRS1976

A photon counting array photometer

The operation and performance of an array photometer with the ability to discriminate on single photoelectrons are discussed. The system consists of a 100 by 100 array of channels which count single photoelectrons. The photosensor is an Intensified Charge Coupled Device using a Fairchild CCD201 which was fabricated by the Electronic Vision Company. This system has demonstrated a noise level which permits single photoelectron discrimination, high scan rate (400 frames/sec), and low lag. The UMAP system has been successfully operated in the photon counting mode on a 36-inch telescope and on a 48-inch telescope. Data from these observations illustrate the system sensitivity and the spacial resolution which is better defined by the size of an individual pixel element on the CCD.

Currie, D. G.↗
NASA NTRS1977

Facular line profiles and facular models

Profiles for lines near 5250 A have been calculated from facular models and compared with observed profiles. The observations are from photographic and photoelectric spectra. The atomic parameters are determined by comparison of calculated profiles with those observed for the quiet sun. The effects of finite spatial resolution and a magnetic field are required to obtain agreement with observed facular line profiles. The empirical magnetic field deduced by matching observed and calculated profiles is reasonably consistent with that in the facular models. The main purpose of this paper is to show that by including the effects of scattered photospheric light and a strong magnetic field, reasonable agreement can be achieved between observed and calculated facular line profiles. Results are also presented for the wing of the Ca II K line, showing line profiles and effective filtergram contrasts for several facular models. It is concluded that observations made with weak Fraunhofer lines are not very useful for discrimination among facular models, particularly without simultaneous magnetic-field measurements. The K line may offer a better discriminator. The facular model presently favored has a magnetic field strength of about 1500 gauss at the surface of the photosphere.

Chapman, G. A.↗
NASA NTRS1977

Optical timing receiver for the NASA laser ranging system. Part 2: High precision time interval digitizer

The development of a high precision time interval digitizer is described. The time digitizer is a 10 psec resolution stop watch covering a range of up to 340 msec. The measured time interval is determined as a separation between leading edges of a pair of pulses applied externally to the start input and the stop input of the digitizer. Employing an interpolation techniques and a 50 MHz high precision master oscillator, the equivalent of a 100 GHz clock frequency standard is achieved. Absolute accuracy and stability of the digitizer are determined by the external 50 MHz master oscillator, which serves as a standard time marker. The start and stop pulses are fast 1 nsec rise time signals, according to the Nuclear Instrument means of tunnel diode discriminators. Firing level of the discriminator define start and stop points between which the time interval is digitized.

Leskovar, B.↗
NASA NTRS1977

Remote sensing of environmental impact of land use activities

The capability to monitor land cover, associated in the past with aerial film cameras and radar systems, was discussed in regard to aircraft and spacecraft multispectral scanning sensors. A proposed thematic mapper with greater spectral and spatial resolutions for the fourth LANDSAT is expected to usher in new environmental monitoring capability. In addition, continuing improvements in image classification by supervised and unsupervised computer techniques are being operationally verified for discriminating environmental impacts of human activities on the land. The benefits of employing remote sensing for this discrimination was shown to far outweigh the incremental costs of converting to an aircraft-satellite multistage system.

Paul, C. K.↗
NASA NTRS1978

Acoustic emission spectral analysis of fiber composite failure mechanisms

The acoustic emission of graphite fiber polyimide composite failure mechanisms was investigated with emphasis on frequency spectrum analysis. Although visual examination of spectral densities could not distinguish among fracture sources, a paired-sample t statistical analysis of mean normalized spectral densities did provide quantitative discrimination among acoustic emissions from 10 deg, 90 deg, and plus or minus 45 deg, plus or minus 45 deg sub s specimens. Comparable discrimination was not obtained for 0 deg specimens.

Egan, D. M.↗
NASA NTRS1978

Selection of a seventh spectral band for the LANDSAT-D thematic mapper

The author has identified the following significant results. Each of the candidate bands were examined in terms of the feasibility of gathering high quality imagery from space while taking into account solar illumination, atmospheric attenuation, and the signal/noise ratio achievable within the TM sensor constraints. For the 2.2 micron region and the thermal IR region, inband signal values were calculated from representative spectral reflectance/emittance curves and a linear discriminant analysis was employed to predict classification accuracies. Based upon the substantial improvement (from 78 t0 92%) in discriminating zones of hydrothermally altered rocks from unaltered zones, over a broad range of observation conditions, a 2.08-2.35 micron spectral band having a ground resolution of 30 meters was recommended.

Holmes, Q. A.↗
NASA NTRS1977

Planetary radio astronomy receiver

The planetary radio astronomy (PRA) experiment on the Voyager spacecraft will measure the amplitude, spectrum, time variations, and polarization of radio emissions over a frequency range of 1.2 kHz to 40.5 MHz with the aid of the PRA receiver (PRAR) and two 10-m orthogonal monopoles. Sensitivity and dynamic range will allow observation of a wide range of Jovian emissions from near earth to encounter. This paper describes the system elements, including the preamp/attenuator/calibrator, the LF polarization discriminator, the four LF-IF amplifier stages, the HF polarization discriminator, the translation LO, the log-IF and detector, the frequency synthesizer, the data processor, control system, power supply, and antennas.

Lang, G. J.↗
NASA NTRS1978

An improved analytical model of the separated region on nozzle boattails

A viscous flow calculation is formulated for modelling the effects of separated, reverse flow regions on nozzle afterbody pressures and drags at subsonic Mach numbers. A discriminating streamline approach is used. Effects of skin friction, axial pressure gradient, and nozzle jet entrainment on the separated discriminating streamline shape are included. The viscous flow calculation is coupled to a potential flow calculation. The combined analysis is found to accurately predict both the magnitude of the measured afterbody pressures and drag, and also their variation with Reynolds number, Mach number and afterbody shape.

Presz, W. M., Jr.↗
NASA NTRS1979

Methods for segment wheat area estimation

The major research conducted during the three years of LACIE to solve problems associated with segment wheat area estimation is reviewed. Topics covered include proportion estimation, clustering, feature extraction, and signature extension. It would appear that LANDSAT-1 and LANDSAT-2 data do not contain enough information to discriminate between crop types perfectly all the time and, therefore, a basic problem arises when no ground truth data on crop types in the area are available. New approaches are needed to reduce labeling error. Perhaps better use of multiyear LANDSAT data, a more detailed understanding of the cropping practices in the area, better crop calendar prediction, and a better understanding of the limiting sources of error in LANDSAT data related to crop discrimination may provide the insight required to develop improved designs.

Heydorn, R. P.↗
NASA NTRS1979

Multispectral Resource Sampler - An experimental satellite sensor for the mid-1980s

An experimental pushbroom scan sensor, the Multispectral Resource Sampler (MRS), being developed by NASA for a future earth orbiting flight is presented. This sensor will provide new earth survey capabilities beyond those of current sensor systems, with a ground resolution of 15 m over a swath width of 15 km in four bands. The four arrays are aligned on a common focal surface requiring no beamsplitters, thus causing a spatial separation on the ground which requires computer processing to register the bands. Along track pointing permits stereo coverage at variable base/height ratios and atmospheric correction experiments, while across track pointing will provide repeat coverage, from a Landsat-type orbit, of every 1 to 3 days. The MRS can be used for experiments in crop discrimination and status, rock discrimination, land use classification, and forestry.

Schnetzler, C. C.↗
NASA NTRS1979

The role of phenology in statistical crop acreage measurement

In order to achieve market acceptance, the accuracy of remote sensing systems needs to be increased from the historically achieved average level of approximately 80-85% to 96-98%, i.e., by a factor of at least three, preferably five. A theory of discrimination is developed based on the fine-grained spectral data from LACIE supersites. It is shown that significant improvements in discrimination accuracy are possible by exploiting the differentials of crop spectra occurring between different phenologic stages. The major effects of such techniques on data system design are examined with respect to recurrence frequency, data volume, and information extraction.

Castruccio, P. A.↗
NASA NTRS1980

LANDSAT applications to wetlands classification in the upper Mississippi River Valley

A 25% improvement in average classification accuracy was realized by processing double-date vs. single-date data. Under the spectrally and spatially complex site conditions characterizing the geographical area used, further improvement in wetland classification accuracy is apparently precluded by the spectral and spatial resolution restrictions of the LANDSAT MSS. Full scene analysis of scanning densitometer data extracted from scale infrared photography failed to permit discrimination of many wetland and nonwetland cover types. When classification of photographic data was limited to wetland areas only, much more detailed and accurate classification could be made. The integration of conventional image interpretation (to simply delineate wetland boundaries) and machine assisted classification (to discriminate among cover types present within the wetland areas) appears to warrant further research to study the feasibility and cost of extending this methodology over a large area using LANDSAT and/or small scale photography.

Lillesand, T. M.↗