Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diamond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Combined experimental and modeling studies of microwave activated CH{sub 4}/H{sub 2}/Ar plasmas for microcrystalline, nanocrystalline, and ultrananocrystalline diamond deposition

A comprehensive study of microwave (MW) activated CH{sub 4}/H{sub 2}/Ar plasmas used for diamond chemical vapor deposition is reported, focusing particularly on the effects of gross variations in the H{sub 2}/Ar ratio in the input gas mixture (from H{sub 2}/Ar mole fraction ratios of > 10:1, through to {approx}1:99). Absolute column densities of C{sub 2}(a) and CH(X) radicals and of H(n = 2) atoms have been determined by cavity ringdown spectroscopy, as functions of height (z) above a substrate and of process conditions (CH{sub 4}, H{sub 2}, and Ar input mole fractions, total pressure, p, and input microwave power, P). Optical emission spectroscopy has also been used to explore the relative densities of electronically excited H atoms, and CH, C{sub 2}, and C{sub 3} radicals, as functions of these same process conditions. These experimental data are complemented by extensive 2D (r, z) modeling of the plasma chemistry, which provides a quantitative rationale for all of the experimental observations. Progressive replacement of H{sub 2} by Ar (at constant p and P) leads to an expanded plasma volume. Under H{sub 2}-rich conditions, > 90% of the input MW power is absorbed through rovibrational excitation of H{sub 2}. Reducing the H{sub 2} content (as in an Ar-rich plasma) leads to a reduction in the absorbed power density; the plasma necessarily expands in order to accommodate a given input power. The average power density in an Ar-rich plasma is much lower than that in an H{sub 2}-rich plasma operating at the same p and P. Progressive replacement of H{sub 2} by Ar is shown also to result in an increased electron temperature, an increased [H]/[H{sub 2}] number density ratio, but little change in the maximum gas temperature in the plasma core (which is consistently {approx}3000 K). Given the increased [H]/[H{sub 2}] ratio, the fast H-shifting (C{sub y}H{sub x} + H {r_reversible} C{sub y}H{sub x-1} + H{sub 2}; y = 1-3) reactions ensure that the core of Ar-rich plasma contains much higher relative abundances of ''product'' species like C atoms, and C{sub 2,} and C{sub 3} radicals. The effects of Ar dilution on the absorbed power dissipation pathways and the various species concentrations just above the growing diamond film are also investigated and discussed.

36 MATERIALS SCIENCE↗

Nanofabricated solid immersion lenses registered to single emitters in diamond

We describe a technique for fabricating micro- and nanostructures incorporating fluorescent defects in diamond with a positional accuracy better than hundreds of nanometers. Using confocal fluorescence microscopy and focused ion beam etching, we initially locate a suitable defect with respect to registration marks on the diamond surface then etch a structure using these coordinates. We demonstrate the technique by etching an 8 {mu}m diameter hemisphere positioned with single negatively charged nitrogen-vacancy defect lies at its origin. Direct comparison of the fluorescence photon count rate before and after fabrication shows an eightfold increase due to the presence of the hemisphere.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: Laser ablation technique for electrically contacting a buried implant layer in single crystal diamond

The creation of thin, buried, and electrically conducting layers within an otherwise insulating diamond by annealed ion implantation damage is well known. Establishing facile electrical contact to the shallow buried layer has been an unmet challenge. We demonstrate a new method, based on laser micro-machining (laser ablation), to make reliable electrical contact to a buried implant layer in diamond. Comparison is made to focused ion beam milling.

36 MATERIALS SCIENCE↗

Levitation and collection of diamond fine particles in the rf plasma chamber equipped with a hot filament

We demonstrate the levitation of diamond fine particles in a H{sub 2} rf plasma chamber equipped with a hot filament and heated electrodes. The levitation conditions should be carefully chosen to compensate the strong thermophoretic forces caused by the filament and the electrodes. This levitation technique with the existence of a hot filament can be applied, e.g., for the efficient growth of diamond layers on seed particles injected and levitated in an rf plasma with reactive gases, e.g., CH{sub 4}/H{sub 2}. Additionally, the method for direct capture of levitated particles on a planar substrate was established, which is useful if it is necessary to analyze the particles after the levitation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of Neutron Reaction Cross Sections in Carbon using a Single Crystal Diamond Detector

A single crystal diamond detector was exposed to the quasi mono-energetic neutron fields in the energy range from 7 MeV to 20.5 MeV produced by the Van de Graaff neutron generator of the EC-JRC-IRMM. Pulse Height Spectra (PHS) of the neutron interaction with the diamond (carbon) were recorded in order to derive the experimental response function of this detector to neutrons in view of its use as a compact fast neutron spectrometer. Several peaks produced by outgoing charged particles produced when neutrons interact with carbon were identified using the reaction Q-values. The corresponding nuclear reactions, such as (n,{alpha}), (n,p), (n,d) for different excitation states were identified in the PHS. The analysis of the peaks allows the derivation of some neutron reaction cross sections in carbon. The results are presented in this paper together with the associated uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optoelectronic surface-related properties in boron-doped and irradiated diamond thin films

Elucidation of microscopic properties of synthetic diamond films, such as formation and evolution of bulk and surface defects, chemistry of dopants, is necessary for a reliable quality control and reproducibility in applications. Surface photovoltage (SPV) spectroscopy and photoluminescence (PL) spectroscopy were employed to study diamond thin films grown on silicon by microwave plasma-assisted chemical vapor deposition and hot-filament chemical vapor deposition with different levels of boron doping in conjunction with gamma irradiation. SPV experiments showed that while the increase of boron concentration leads to a semiconductor-metal transition, subsequent gamma irradiation reverts quasi-metallic samples back to a semiconducting state by compensating electrical activity of boron possibly via hydrogen. One of the most pronounced common transitions observed at {approx}3.1-3.2 eV in the SPV spectra was also present in all of the PL spectra. It is likely that this is a signature of the sp{sup 2}-hybridized carbon clusters in or in the vicinity of grain boundaries.

36 MATERIALS SCIENCE↗

Transforming graphite to nanoscale diamonds by a femtosecond laser pulse

Formation of cubic diamond from graphite following irradiation by a single, intense, ultra-short laser pulse has been observed. Highly oriented pyrolytic graphite (HOPG) samples were irradiated by a 100 fs pulse with a center wavelength of 800 nm. Following laser exposure, the HOPG samples were studied using Raman spectroscopy of the sample surface. In the laser-irradiated areas, nanoscale cubic diamond crystals have been formed. The exposed areas were also studied using grazing incidence x-ray powder diffraction showing a restacking of planes from hexagonal graphite to rhombohedral graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct observation and mechanism of increased emission sites in Fe-coated microcrystalline diamond films

The electron field emission (EFE) properties of microcrystalline diamond (MCD) films are significantly enhanced due to the Fe coating and post-annealing processes. The 900 Degree-Sign C post-annealed Fe coated diamond films exhibit the best EFE properties, with a turn on field (E{sub 0}) of 3.42 V/{mu}m and attain EFE current density (J{sub e}) of 170 {mu}A/cm{sup 2} at 7.5 V/{mu}m. Scanning tunnelling spectroscopy (STS) in current imaging tunnelling spectroscopy mode clearly shows the increased number density of emission sites in Fe-coated and post-annealed MCD films than the as-prepared ones. Emission is seen from the boundaries of the Fe (or Fe{sub 3}C) nanoparticles formed during the annealing process. In STS measurement, the normalized conductance (dI/dV/I/V) versus V curves indicate nearly metallic band gap, at the boundaries of Fe (or Fe{sub 3}C) nanoparticles. Microstructural analysis indicates that the mechanism for improved EFE properties is due to the formation of nanographite that surrounds the Fe (or Fe{sub 3}C) nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integration of high-dielectric constant Ta{sub 2}O{sub 5} oxides on diamond for power devices

The authors report on the direct integration of high-dielectric constant (high-k) Ta{sub 2}O{sub 5} films on p-type single crystal diamond for high-power electronic devices. Crystallized hexagonal phase {delta}-Ta{sub 2}O{sub 5} film is achieved on diamond by annealing the amorphous Ta{sub 2}O{sub 5} film deposited by a sputter-deposition technique. The electrical properties of the Ta{sub 2}O{sub 5} thin films are investigated by fabricating metal-insulator-semiconductor (MIS) diodes. The leakage current of the MIS diode is as low as 10{sup -8} A/cm{sup 2} for the as-deposited amorphous Ta{sub 2}O{sub 5} film and 10{sup -2} A/cm{sup 2} for the crystallized film, which is 10{sup 8} and 10{sup 2} times lower than that of the Schottky diode at a forward bias of -3 V, respectively. The dielectric constant of the amorphous Ta{sub 2}O{sub 5} films is measured to be 16 and increases to 29 after annealing at 800 Degree-Sign C. Different current leakage mechanisms and charge trapping behaviors are proposed for the amorphous and crystallized Ta{sub 2}O{sub 5} thin films.

36 MATERIALS SCIENCE↗

Band offsets of Al{sub 2}O{sub 3} and HfO{sub 2} oxides deposited by atomic layer deposition technique on hydrogenated diamond

High-k oxide insulators (Al{sub 2}O{sub 3} and HfO{sub 2}) have been deposited on a single crystalline hydrogenated diamond (H-diamond) epilayer by an atomic layer deposition technique at temperature as low as 120 Degree-Sign C. Interfacial electronic band structures are characterized by X-ray photoelectron spectroscopy. Based on core-level binding energies and valence band maximum values, valence band offsets are found to be 2.9 {+-} 0.2 and 2.6 {+-} 0.2 eV for Al{sub 2}O{sub 3}/H-diamond and HfO{sub 2}/H-diamond heterojunctions, respectively. Band gaps of the Al{sub 2}O{sub 3} and HfO{sub 2} have been determined to be 7.2 {+-} 0.2 and 5.4 {+-} 0.2 eV by measuring O 1s energy loss spectra, respectively. Both the Al{sub 2}O{sub 3}/H-diamond and HfO{sub 2}/H-diamond heterojunctions are concluded to be type-II staggered band configurations with conduction band offsets of 1.2 {+-} 0.2 and 2.7 {+-} 0.2 eV, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial chemical bonding state and band alignment of CaF{sub 2}/hydrogen-terminated diamond heterojunction

CaF{sub 2} films are deposited on hydrogen-terminated diamond (H-diamond) by a radio-frequency sputter-deposition technique at room temperature. Interfacial chemical bonding state and band alignment of CaF{sub 2}/H-diamond heterojunction are investigated by X-ray photoelectron spectroscopy. It is confirmed that there are only C-Ca bonds at the CaF{sub 2}/H-diamond heterointerface. Valence and conductance band offsets of the CaF{sub 2}/H-diamond heterojunciton are determined to be 3.7 {+-} 0.2 and 0.3 {+-} 0.2 eV, respectively. It shows a type I straddling band configuration. The large valence band offset suggests advantage of the CaF{sub 2}/H-diamond heterojunciton for the development of high power and high frequency field effect transistors.

36 MATERIALS SCIENCE↗

A spectrometer on chemical vapour deposition-diamond basis for the measurement of the charge-state distribution of heavy ions in a laser-generated plasma

This article reports on the development and the first applications of a new spectrometer which enables the precise and time-resolved measurement of both the energy loss and the charge-state distribution of ion beams with 10 < Z < 30 at energies of 4-8 MeV/u after their interaction with a laser-generated plasma. The spectrometer is based on five 20 Multiplication-Sign 7 mm{sup 2} large and 20 {mu}m thick polycrystalline diamond samples produced via the Chemical Vapour Deposition (CVD) process and was designed with the help of ion-optical simulations. First experiments with the spectrometer were successfully carried out at GSI using {sup 48}Ca ions at an energy of 4.8 MeV/u interacting with a carbon plasma generated by the laser irradiation of a thin foil target. Owing to the high rate capability and the short response time of the spectrometer, pulsed ion beams with 10{sup 3}-10{sup 4} ions per bunch at a bunch frequency of 108 MHz could be detected. The temporal evolution of the five main charge states of the calcium ion beams as well as the corresponding energy loss values could be measured simultaneously. Due to the outstanding properties of diamond as a particle detector, a beam energy resolution ({Delta}E/E) Almost-Equal-To 0.1% could be reached using the presented experimental method, while a precision of 10% in the energy loss and charge-state distribution data was obtained.

36 MATERIALS SCIENCE↗

The properties of photonic band gaps for three-dimensional plasma photonic crystals in a diamond structure

In this paper, the properties of photonic band gaps (PBGs) for two types of three-dimensional plasma photonic crystals (PPCs) composed of isotropic dielectric and unmagnetized plasma with diamond lattices are theoretically investigated for electromagnetic waves based on a modified plane wave expansion method. The equations for type-1 structure are theoretically deduced, which depend on the diamond lattices realization (dielectric spheres immersed in plasma background). The influences of dielectric constant of dielectric, plasma collision frequency, filling factor, and plasma frequency on PBGs are investigated, respectively, and some corresponding physical explanations and the possible methods to realize the three-dimensional PPCs in experiments are also given. From the numerical results, it has been shown that not only the locations but also the gap/midgap ratios of the PBGs for two types of PPCs can be tuned by plasma frequency, filling factor, and the relative dielectric constant, respectively. However, the plasma collision frequency has no effect on the frequency ranges and gap/midgap ratios of the PBGs for two types of PPCs.

36 MATERIALS SCIENCE↗

Super-thin single crystal diamond membrane radiation detectors

We propose to use the non-electronic grade (nitrogen content 5 ppb < [N] < 5 ppm) single crystal (sc) chemical vapour deposited (CVD) diamond as a thin-membrane radiation detector. Using deep Ar/O{sub 2} plasma etching it is possible to produce self-supported few micrometres thick scCVD membranes of a size approaching 7 mm × 7 mm, with a very good surface quality. After metallization and contacting, electrical properties of diamond membrane detectors were probed with 5.486 MeV α-particles as an ionization source. Despite nitrogen impurity, scCVD membrane detectors exhibit stable operation, charge collection efficiency close to 100%, with homogenous response, and extraordinary dielectric strength up to 30 V/μm.

36 MATERIALS SCIENCE↗

An ultra-thin diamond membrane as a transmission particle detector and vacuum window for external microbeams

Several applications of external microbeam techniques demand a very accurate and controlled dose delivery. To satisfy these requirements when post-sample ion detection is not feasible, we constructed a transmission single-ion detector based on an ultra-thin diamond membrane. The negligible intrinsic noise provides an excellent signal-to-noise ratio and enables a hit-detection efficiency of close to 100%, even for energetic protons, while the small thickness of the membrane limits beam spreading. Moreover, because of the superb mechanical stiffness of diamond, this membrane can simultaneously serve as a vacuum window and allow the extraction of an ion microbeam into the atmosphere.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spectroscopic ellipsometry of homoepitaxial diamond multilayers and delta-doped structures

The optimization of diamond-based unipolar electronic devices such as pseudo-vertical Schottky diodes or delta-doped field effect transistors relies in part on the sequential growth of nominally undoped (p{sup –}) and heavily boron doped (p{sup ++}) layers with well-controlled thicknesses and steep interfaces. Optical ellipsometry offers a swift and contactless method to characterize the thickness, roughness, and electronic properties of semiconducting and metallic diamond layers. We report ellipsometric studies carried out on delta-doped structures and other epitaxial multilayers with various boron concentrations and thicknesses (down to the nanometer range). The results are compared with Secondary Ion Mass Spectroscopy and transport measurements.

36 MATERIALS SCIENCE↗

Flexible electron field emitters fabricated using conducting ultrananocrystalline diamond pyramidal microtips on polynorbornene films

High performance flexible field emitters made of aligned pyramidal shaped conducting ultrananocrystalline diamond (C-UNCD) microtips on polynorbornene substrates is demonstrated. Flexible C-UNCD pyramidal microtips show a low turn-on field of 1.80 V/μm with a field enhancement factor of 4580 and a high emission current density of 5.8 mA/cm{sup 2} (at an applied field of 4.20 V/μm) with life-time stability of 210 min. Such an enhancement in the field emission is due to the presence of sp{sup 2}-graphitic sheath with a nanowire-like diamond core. This high performance flexible C-UNCD field emitter is potentially useful for the fabrication of diverse, flexible electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zr/oxidized diamond interface for high power Schottky diodes

High forward current density of 10{sup 3} A/cm{sup 2} (at 6 V) and a breakdown field larger than 7.7 MV/cm for diamond diodes with a pseudo-vertical architecture, are demonstrated. The power figure of merit is above 244 MW/cm{sup 2} and the relative standard deviation of the reverse current density over 83 diodes is 10% with a mean value of 10{sup −9} A/cm{sup 2}. These results are obtained with zirconium as Schottky contacts on the oxygenated (100) oriented surface of a stack comprising an optimized lightly boron doped diamond layer on a heavily boron doped one, epitaxially grown on a Ib substrate. The origin of such performances are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗