SEARCH · Engineering Papers

Results for “data quality analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Augmenting Conceptual Design Trajectory Tradespace Exploration with Graph Theory

Within conceptual design changes occur rapidly due to a combination of uncertainty and shifting requirements. To stay relevant in this fluid time, trade studies must also be performed rapidly. In order to drive down analysis time while improving the information gained by these studies, surrogate models can be created to represent the complex output of a tool or tools within a specified tradespace. In order to create this model however, a large amount of data must be collected in a short amount of time. By this method, the historical approach of relying on subject matter experts to generate the data required is schedule infeasible. However, by implementing automation and distributed analysis the required data can be generated in a fraction of the time. Previous work focused on setting up a tool called multiPOST capable of orchestrating many simultaneous runs of an analysis tool assessing these automated analyses utilizing heuristics gleaned from the best practices of current subject matter experts. In this update to the previous work, elements of graph theory are included to further drive down analysis time by leveraging data previously gathered. It is shown to outperform the previous method in both time required, and the quantity and quality of data produced.

Dees, Patrick D.↗

NASA NTRS2016

Augmenting Conceptual Design Trajectory Tradespace Exploration with Graph Theory

Dees, Patrick D.↗

NASA NTRS1998

Precise Clock Solutions using Carrier Phase From GPS Receivers in the International GPS Service

As one of its activities as an Analysis Center in the International GPS Service (IGS), the Jet Propulsion Laboratory (JPL) uses data from a globally distributed network of geodetic-quality GPS receivers to estimate precise clock solutions, relative to a chosen reference, for both the GPS satellites and GPS receiver internal clocks, everyday.

GPS↗

DOE OSTI2020

Optimal 1D Ly α forest power spectrum estimation – I. DESI-lite spectra

ABSTRACT The 1D Ly α forest flux power spectrum P1D is sensitive to scales smaller than a typical galaxy survey, and hence ties to the intergalactic medium’s thermal state, suppression from neutrino masses, and new dark matter models. It has emerged as a competitive framework to study new physics, but also has come with various challenges and systematic errors in analysis. In this work, we revisit the optimal quadratic estimator for P1D, which is robust against the relevant problems such as pixel masking, time evolution within spectrum, and quasar continuum errors. We further improve the estimator by introducing a fiducial power spectrum, which enables us to extract more information by alleviating the discreteness of band powers. We meticulously apply our method to synthetic Dark Energy Spectroscopic Instrument (DESI) spectra and demonstrate how the estimator overcomes each challenge. We further apply an optimization scheme that approximates the Fisher matrix to three elements per row and reduces computation time by 60 per cent. We show that we can achieve per cent precision in P1D with 5-yr DESI data in the absence of systematics and provide forecasts for different spectral qualities.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1996

International GPS Service for Geodynamics

This 1995 annual report of the IGS International GPS (Global Positioning System) Service for Geodynamics - describes the second operational year of the service. It provides the many IGS contributing agencies and the rapidly growing user community with essential information on current organizational and technical matters promoting the IGS standards and products (including organizational framework, data processing strategies, and statistics showing the remarkable expansion of the GPS monitoring network, the improvement of IGS performance, and product quality). It also introduces important practical concepts for network densification by integration of regional stations and the combination of station coordinate solutions. There are groups of articles describing general aspects of the IGS, the Associate Analysis Centers (AACs), Data Centers, and IGS stations.

Zumberge, J. F.↗

NASA NTRS1993

A demonstration of TDRS orbit determination using differential tracking observables from GPS ground receivers

A Global Positioning System (GPS) flight receiver provides a means of precisely determining orbits for satellites in low to moderate altitude orbits. Above 5000 km altitude, however, relatively few GPS satellites are visible. We present a new approach to orbit determination for satellites at higher altitudes. Modification of GPS ground receivers enables a beacon from the orbiter to be tracked simultaneously with GPS data. The orbit accuracy expected from this GPS-like tracking (GLT) technique in principle could be comparable to accuracies of GPS orbits. Present-day GPS orbit quality from a daily semi-automated analysis system at the Jet Propulsion Laboratory is at the 30 - 50 cm level: expected accuracies for orbiters with GLT are calculated to be in the few-meter range for altitudes up to 100000 km. For geosynchronous satellites, however, there are unique challenges due to geometrical limitations and to the lack of strong dynamical signature in tracking data. We examine two approaches for tracking Tracking and Data Relay Satellites (TDRS) geostationary orbiters. One uses GLT with a global network; the other relies on a small `connected element' ground network with a distributed clock for short baseline differential carrier phase (SB Delta Phi). In priciple, both could meet 50-m TDRS operational requirements. However there are practical difficulties with either pure GLT or SB Delta Phi tracking schemes for present-day TDRS satellites. We describe an experiment planned for late 1993 which will combine aspects of both GLT and SB Delta Phi to demonstrate a new approach for tracking TDRS which offers a number of operationally convenient and attractive features. The TDRS demo will in effect ba a proof of concept experiment for both the GLT and SB Delta Phi approaches to tracking spacecraft.

Lichten, Stephen M.↗

DOE OSTI2022

Benchmark datasets for SARS-CoV-2 surveillance bioinformatics

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the cause of coronavirus disease 2019 (COVID-19), has spread globally and is being surveilled with an international genome sequencing effort. Surveillance consists of sample acquisition, library preparation, and whole genome sequencing. This has necessitated a classification scheme detailing Variants of Concern (VOC) and Variants of Interest (VOI), and the rapid expansion of bioinformatics tools for sequence analysis. These bioinformatic tools are means for major actionable results: maintaining quality assurance and checks, defining population structure, performing genomic epidemiology, and inferring lineage to allow reliable and actionable identification and classification. Additionally, the pandemic has required public health laboratories to reach high throughput proficiency in sequencing library preparation and downstream data analysis rapidly. However, both processes can be limited by a lack of a standardized sequence dataset. We identified six SARS-CoV-2 sequence datasets from recent publications, public databases and internal resources. In addition, we created a method to mine public databases to identify representative genomes for these datasets. Using this novel method, we identified several genomes as either VOI/VOC representatives or non-VOI/VOC representatives. To describe each dataset, we utilized a previously published datasets format, which describes accession information and whole dataset information. Additionally, a script from the same publication has been enhanced to download and verify all data from this study.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Common Column Identification for Table Similarity Detection in Electrified Transportation Data Lakes

Electrified transportation often requires researchers and operators to interact with datasets from a wide range of sources and disciplines, such as transportation, power systems, public health, policies, and regulations. These datasets vary in quality and format, making it difficult to understand, preprocess, and identify key columns representing real-world entities or values for indexing and joining, which can negatively impact downstream analysis and operation. Existing solutions are limited, requiring extensive manual customization or data expertise to utilize. In this article, we propose a multi-layered approach to automatically identify key columns to expedite preprocessing and aid in analysis of electrified transportation data. Our method leverages a dynamic ontology to identify common fields and an information theory-based strategy for edge cases that are difficult to generalize. Evaluations on a number of datasets from data.gov and kaggle.com show improved performance of our methods over several baseline techniques, and our ablation analyses illustrate the efficacy of individual components of our method. Our case studies also demonstrate that our methods have the potential to improve analysis of electrified transportation data and aid in automatic integration of such datasets.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

Evaluating quenching in cosmological simulations of galaxy formation with spectral covariance in the optical window

ABSTRACT Cosmological hydrodynamical simulations provide valuable insights on galaxy evolution when coupled with observational data. Comparisons with real galaxies are typically performed via scaling relations of the observables. Here, we follow an alternative approach based on the spectral covariance in a model-independent way. We build upon previous work by Sharbaf et al. that studied the covariance of high-quality SDSS (Sloan Digital Sky Survey) continuum-subtracted spectra in a relatively narrow range of velocity dispersion ($\sigma \in [100,150]$ km s$^{-1}$). Here, the same analysis is applied to synthetic data from the eagle and IllustrisTNG100 simulations, to assess the ability of these runs to mimic real galaxies. The real and simulated spectra are consistent regarding spectral covariance, although with subtle differences that can inform the implementation of subgrid physics. Spectral fitting done a posteriori on stacks segregated with respect to latent space reveals that the first principal component (PC1) is predominantly influenced by the stellar age distribution, with an underlying age–metallicity degeneracy. Good agreement is found regarding star formation prescriptions but there is disagreement with active galactic nucleus (AGN) feedback, that also affects the subset of quiescent galaxies. We show a substantial difference in the implementation of the AGN subgrid prescriptions, regarding central black hole seeding, that could lead to the mismatch. Differences are manifest between these two simulations in the star formation histories stacked with respect to latent space. We emphasize that this methodology only relies on the spectral covariance to assess whether simulations provide a true representation of galaxy formation.

Sharbaf, Z. (ORCID:0009000450545946)↗

DOE OSTI2022

Additive Manufacturing Flaw Assessment Methodology

An evolution fatigue data and flaw tolerance of components produced using the Powder Bed Fusion (PBF) Additive Manufacturing (AM) process is documented in this report. Initial differences in fatigue data for AM components compared to smooth bar fatigue data indicated a need for a more detailed analysis of AM data available in technical literature. The investigation was initiated to support the development of a fatigue analysis methodology for AM components to support the of codification of AM technology for pressure equipment. The project was initiated to collect and analyze stainless steel 304L and 316L AM fatigue test data and corresponding process and quality information to develop S-N and E-N based fatigue data representation. Additional AM fatigue test data including Inconel Ti-6-4 and aluminum alloys were also considered for comparison purposes Metallic AM parts tend to contain various forms of defects distributed throughout the part. If an AM part is subjected to fatigue loading in service, a fatigue analysis needs to be performed during the design process to ensure an acceptable service life for the part. Post-process machining and polishing do not to improve fatigue resistance in any significant degree. The low cycle fatigue regime is of particular interest to this project in support of flaw acceptance criteria currently under development by ASME’s BPTCS/BNCS. Internal defects become exposed as external surface defects during machining for the machining of the AM part to final dimensions. This implies that as long as inherent AM defects are within a controlled limit in terms of both size and distribution characteristics, the corresponding fatigue test data in terms of either S-N (stress life) or E-N (strain life) can be investigated and characterized to establish fatigue properties of AM parts for design and fatigue evaluation purposes. The resulting S-N or E-N curves and their scatter bands can be used to derive fatigue design allowable stress values by capturing the effects of distributed discontinuities within an acceptable limit.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Multi-Omics Driven Metabolic Network Reconstruction and Analysis of Lignocellulosic Carbon Utilization in Rhodosporidium toruloides

An oleaginous yeast Rhodosporidium toruloides is a promising host for converting lignocellulosic biomass to bioproducts and biofuels. In this work, we performed multi-omics analysis of lignocellulosic carbon utilization in R. toruloides and reconstructed the genome-scale metabolic network of R. toruloides . High-quality metabolic network models for model organisms and orthologous protein mapping were used to build a draft metabolic network reconstruction. The reconstruction was manually curated to build a metabolic model using functional annotation and multi-omics data including transcriptomics, proteomics, metabolomics, and RB-TDNA sequencing. The multi-omics data and metabolic model were used to investigate R. toruloides metabolism including lipid accumulation and lignocellulosic carbon utilization. The developed metabolic model was validated against high-throughput growth phenotyping and gene fitness data, and further refined to resolve the inconsistencies between prediction and data. We believe that this is the most complete and accurate metabolic network model available for R. toruloides to date.

09 BIOMASS FUELS↗

NASA NTRS2008

Extended Operation Testing of Stirling Convertors in Support of Stirling Radioisotope Power System Development

100 We class Stirling convertors began extended operation testing at NASA Glenn Research Center (GRC) in 2003 with a pair of Technology Demonstration Convertors (TDCs) operating in air. Currently, the number of convertors on extended operation test has grown to 12, including both TDCs and Advanced Stirling Convertors (ASCs) operating both in air and in thermal vacuum. Additional convertors and an electrically heated radioisotope generator will be put on test in the near future. This testing has provided data to support life and reliability estimates and the quality improvements and design changes that have been made to the convertor. The convertors operated 24/7 at the nominal amplitude and power levels. Performance data were recorded on an hourly basis. Techniques to monitor the convertors for change in internal operation included gas analysis, vibration measurements and acoustic emission measurements. This data provided a baseline for future comparison. This paper summarizes the results of over 145,000 hours of TDC testing and 40,000 hours of ASC testing and discusses trends in the data. Data shows the importance of improved materials, hermetic sealing, and quality processes in maintaining convertor performance over long life.

Lewandowski, Edward J.↗

NASA NTRS2009

Extended Operation Testing of Stirling Convertors in Support of Stirling Radioisotope Power System Development

100 We class Stirling convertors began extended operation testing at NASA Glenn Research Center (GRC) in 2003 with a pair of Technology Demonstration Convertors (TDCs) operating in air. Currently, the number of convertors on extended operation test has grown to 12, including both TDCs and Advanced Stirling Convertors (ASCs) operating both in air and in thermal vacuum. Additional convertors and an electrically heated radioisotope generator will be put on test in the near future. This testing has provided data to support life and reliability estimates and the quality improvements and design changes that have been made to the convertor. The convertors operated 24/7 at the nominal amplitude and power levels. Performance data were recorded on an hourly basis. Techniques to monitor the convertors for change in internal operation included gas analysis, vibration measurements, and acoustic emission measurements. This data provided a baseline for future comparison. This paper summarizes the results of over 145,000 hr of TDC testing and 40,000 hr of ASC testing and discusses trends in the data. Data shows the importance of improved materials, hermetic sealing, and quality processes in maintaining convertor performance over long life.

Lewandowski, Edward J.↗

DOE OSTI2020

Impacts on product quality attributes of monoclonal antibodies produced in CHO cell bioreactor cultures during intentional mycoplasma contamination events

Abstract A mycoplasma contamination event in a biomanufacturing facility can result in costly cleanups and potential drug shortages. Mycoplasma may survive in mammalian cell cultures with only subtle changes to the culture and penetrate the standard 0.2‐µm filters used in the clarification of harvested cell culture fluid. Previously, we reported a study regarding the ability of Mycoplasma arginini to persist in a single‐use, perfusion rocking bioreactor system containing a Chinese hamster ovary (CHO) DG44 cell line expressing a model monoclonal immunoglobulin G 1 (IgG1) antibody. Our previous work showed that M. arginini affects CHO cell growth profile, viability, nutrient consumption, oxygen use, and waste production at varying timepoints after M. arginini introduction to the culture. Careful evaluation of certain identified process parameters over time may be used to indicate mycoplasma contamination in CHO cell cultures in a bioreactor before detection from a traditional method. In this report, we studied the changes in the IgG1 product quality produced by CHO cells considered to be induced by the M. arginini contamination events. We observed changes in critical quality attributes correlated with the duration of contamination, including increased acidic charge variants and high mannose species, which were further modeled using principal component analysis to explore the relationships among M. arginini contamination, CHO cell growth and metabolites, and IgG1 product quality attributes. Finally, partial least square models using NIR spectral data were used to establish predictions of high levels (≥10 4 colony‐forming unit [CFU/ml]) of M. arginini contamination, but prediction of levels below 10 4 CFU/ml were not reliable. Contamination of CHO cells with M. arginini resulted in significant reduction of antibody product quality, highlighting the importance of rapid microbiological testing and mycoplasma testing during particularly long upstream bioprocesses to ensure product safety and quality.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Air Quality Analysis and Tools For Policy

South Asia is home to some of the most significant air quality challenges in the world. More than 99% of the region’s population is exposed to unhealthy fine particulate matter (PM2.5) concentrations, as defined by the World Health Organization. Recent policy initiatives in South Asia show that air quality policy is a priority, given the health impacts of air pollution. At the same time, capacity and data to assess and address air pollution remains limited in many areas. The main objective of this report is to outline a set of publicly-available tools that can be used to inform policies to improve air quality in South Asia. The report primarily focuses on tools such as emission inventories and integrated modeling systems with country-level resolution and illustrates their air quality assessment capabilities through examples and brief technical summaries. The report focuses on: (a) the Community Emissions Data System (CEDS) that provides historical emissions of key pollutants for all countries in South Asia, and (b) profiles an analysis of Indian air pollution and policy scenarios, using several integrated modeling tools. Both of these examples draw on recent research and data that outlines the scale of the challenge as well as the policy options for reducing air pollution in the region. The report concludes with key recommendations for regional stakeholders working towards mitigating air pollution in South Asia.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1997

Analysis of Solar Spectral Irradiance Measurements from the SBUV/2-Series and the SSBUV Instruments

During this period of performance, 1 March 1997 - 31 August 1997, the NOAA-11 SBUV/2 solar spectral irradiance data set was validated using both internal and external assessments. Initial quality checking revealed minor problems with the data (e.g. residual goniometric errors, that were manifest as differences between the two scans acquired each day). The sources of these errors were determined and the errors were corrected. Time series were constructed for selected wavelengths and the solar irradiance changes measured by the instrument were compared to a Mg II proxy-based model of short- and long-term solar irradiance variations. This analysis suggested that errors due to residual, uncorrected long-term instrument drift have been reduced to less than 1-2% over the entire 5.5 year NOAA-11 data record. Detailed statistical analysis was performed. This analysis, which will be documented in a manuscript now in preparation, conclusively demonstrates the evolution of solar rotation periodicity and strength during solar cycle 22.

Cebula, Richard P.↗

NASA NTRS2007

Application of NASA Giovanni to Coastal Zone Remote Sensing Search

The Goddard Earth Sciences Data and Information Services Center (GES DISC) Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni) provides rapid access to, and enables effective utilization of, remotely-sensed data that are applicable to investigations of coastal environmental processes. Data sets in Giovanni include precipitation data from the Tropical Rainfall Measuring Mission (TRMM), particularly useful for coastal storm investigations; ocean color radiometry data from the Sea-viewing Wide Field-of-view Sensor (SeaWIFS) and Moderate Resolution Imaging Spectroradiometer (MODIS), useful for water quality evaluation, phytoplankton blooms, and terrestrial-marine interactions; and atmospheric data from MODIS and the Advanced Infrared Sounder (AIRS), providing the capability to characterize atmospheric variables. Giovanni provides a simple interface allowing discovery and analysis of environmental data sets with accompanying graphic visualizations. Examples of Giovanni investigations of the coastal zone include hurricane and storm impacts, hydrologically-induced phytoplankton blooms, chlorophyll trend analysis, and dust storm characterization. New and near-future capabilities of Giovanni will be described.

Acker, James↗

NASA NTRS2007

Application of NASA Giovanni to Coastal Zone Remote Sensing Research

Acker, James↗