SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This plan describes the post irradiation examination (PIE) activities to be performed by Oak Ridge National Laboratory (ORNL) on irradiated Compact 8 4 taken from the Advanced Gas Reactor (AGR) experiment, AGR 3/4. This work will be performed in accordance with the general objectives outlined in the AGR 3/4 PIE Plan and guidance in the ORNL PIE Statement of Work.
This plan describes the post irradiation examination (PIE) activities to be performed by Oak Ridge National Laboratory (ORNL) on irradiated Compact 10 4 taken from the Advanced Gas Reactor (AGR) experiment, AGR 3/4. This work will be performed in accordance with the general objectives outlined in the AGR 3/4 PIE Plan and guidance in the ORNL PIE Statement of Work.
The discovery of a population of bright blue pointlike sources within 5 kpc of the nucleus of NGC 1275 using HST Planetary Camera observations is reported. The typical object has MV of about -12 to -14. They are all blue, with V - R of less than about 0.3. The color distribution and lack of excess H-alpha emission are consistent with nearly all being continuum sources. Many sources are unresolved even with the HST and consequently have sizes of less than about 15 pc. It is suggested that these are young star clusters that will evolve to look like globular clusters. They are bluer than any clusters seen in the Milky Way or M87, and brighter than the blue clusters seen in the LMC. Ages of several hundred million years or less and corresponding masses of 10 exp 5 - 10 exp 8 solar masses are derived.
The paper reports the discovery of far-IR emission at 53, 100, and 175 microns from two sources (one in NGC 2264 and another near the Rosette Nebula) associated with molecular clouds but not with any detectable radio continuum emission. The maximum source diameters are estimated to be 20 arcsec, and the spectra of both objects are shown to be broader than that of a 'typical' H II region. It is found that both objects are unresolved at all the IR wavelengths observed, have relatively wide IR spectra, are located at or near the apices of fan-shaped cometary nebulae, have colors between 50 and 200 microns that are among the coolest of any observed far-IR sources, and have luminosities that are an order of magnitude less than the weakest sources observed near compact H II regions. A cylindrically symmetric source model is considered in which a 'hole' in the dust distribution around the central source provides the visible luminosity of the nearby nebula and the dust temperature decreases rapidly with distance. It is suggested that the central sources are probably pre-main-sequence stellar objects with masses of 5 to 10 solar masses and luminosities of a few thousand suns.
Long-baseline interferometry of the quasars 4C 39.25 and 3C 345 at 10.65 and 14.77 GHz shows that the centimeter radio source in each object is double, with component separations of 0.0020 arcsec (4C 39.25) and 0.0013 arcsec (3C 345 at 1974.5). For each source, the separation is the same at both frequencies, as well as similar to the structure observed at 7.85 GHz (and 5.0 GHz for 4C 39.25). The spectra of the individual components are derived and shown to vary with time approximately as expected for expanding self-absorbed synchrotron sources. The magnetic fields in the components are estimated to be as high as 0.1 gauss, but the structure of the sources appears to be unrelated to the magnetic-field orientation derived from low-resolution polarization measurements. The component separation in 4C 39.25 has not changed for several years, whereas 3C 345 shows rapid expansion.
The 50 and 100 micron emissions of OJ 287 were detected and upper limits for BL Lac were obtained. These first measurements of two BL Lac objects in the far-infrared show them to be similar to the few quasars previously observed in the far-infrared. In particular, there is no evidence for significant dust emission, and the lambda approximately 100 micron flux density fits on a smooth line joining the near-infrared and millimeter continuum fluxes. The implications of the results for models of the sources are discussed briefly.
The 50 and 100 micron emissions of OJ 287 were detected and upper limits for BL Lac were obtained. These first measurements of two BL Lac objects in the far-infrared show them to be similar to the few quasars previously observed in the far-infrared. In particular, there is no evidence for significant dust emission, and the lambda approximately 100 micron flux density fits on a smooth line joining the near-infrared and millimeter continuum fluxes. The implications of the results for models of the sources are discussed briefly.
Abstract We study gauge preheating following pseudoscalar-driven inflation in full general relativity. We implement the Baumgarte-Shapiro-Shibata-Nakamura (BSSN) scheme to solve the full nonlinear evolution of the metric alongside the dynamics of the pseudoscalar and gauge fields. The dynamics of the background and emission of gravitational waves are broadly consistent with simulations in a Friedmann-Lemaître-Robertson-Walker (FLRW) spacetime. We find large, localized overdensities in the BSSN simulations of orderδ=δρ/ρ∼ 30, and the dimensionless power spectrum ofδpeaks above unity. These overdense regions are seeded on length scales only slightly smaller than the horizon, and have a compactnessC∼ 0.1. The scale of peak compactness is shorter than the Jeans length, which implies that pressure of the matter fields plays an important role in the evolution of these objects.
This project aims to develop highly compacted microchannel protonic ceramic membrane reactors (HCM-PCMRs) for efficient and cost-effective methane dehydrogenation to aromatics (MDA, e.g., benzene). The integration of single-atom catalysis, electrocatalysis, membrane catalysis, membrane separation, and advanced manufacturing is designed to fulfill this goal. This project's success will ultimately develop a new cost-effective, efficient, and highly compacted infrastructure technology to address the flare and venting issue during oil and gas operations and other gas-to-liquid technologies. The key objectives for the three budget periods (BPs) are as follows.
Photodetector or optical fiber leading to photodetector mounted inside gas/tungsten arc welding torch to monitor arc light reflected from oscillating surface of weld pool. Proposed optical monitoring components preserve compact profile of welding torch, maintained in fixed aim at weld-pool position at end of welding torch, and protected against bumping external objects.
Hubble Space Telescope Wide Field/Planetary Camera UBV images of three massive, compact multiple systems with the SNR 30 Dor B/NGC 2060 and 30 Dor C/NGC 2044 are discussed and illustrated. In two cases, WN+OB objects have been resolved into additional components to those previously known from ground-based observations, substantially reducing the luminosities of the WN stars and rendering them currently unidentified; in the third case, the components of a B+K composite-spectrum object have been clearly identified. The results are of significance for evolutionary interpretations of these massive stars and for determinations of the upper IMF in extragalactic systems.
Today's form of jet engine power comes from what is called a gas turbine engine. This engine is on average 14% efficient and emits great quantities of green house gas carbon dioxide and air pollutants, Le. nitrogen oxides and sulfur oxides. The alternate method being researched involves a reformer and a solid oxide fuel cell (SOFC). Reformers are becoming a popular area of research within the industry scale. NASA Glenn Research Center's approach is based on modifying the large aspects of industry reforming processes into a smaller jet fuel reformer. This process must not only be scaled down in size, but also decrease in weight and increase in efficiency. In comparison to today's method, the Jet A fuel reformer will be more efficient as well as reduce the amount of air pollutants discharged. The intent is to develop a 10kW process that can be used to satisfy the needs of commercial jet engines. Presently, commercial jets use Jet-A fuel, which is a kerosene based hydrocarbon fuel. Hydrocarbon fuels cannot be directly fed into a SOFC for the reason that the high temperature causes it to decompose into solid carbon and Hz. A reforming process converts fuel into hydrogen and supplies it to a fuel cell for power, as well as eliminating sulfur compounds. The SOFC produces electricity by converting H2 and CO2. The reformer contains a catalyst which is used to speed up the reaction rate and overall conversion. An outside company will perform a catalyst screening with our baseline Jet-A fuel to determine the most durable catalyst for this application. Our project team is focusing on the overall research of the reforming process. Eventually we will do a component evaluation on the different reformer designs and catalysts. The current status of the project is the completion of buildup in the test rig and check outs on all equipment and electronic signals to our data system. The objective is to test various reformer designs and catalysts in our test rig to determine the most efficient configuration to incorporate into the specific compact jet he1 reformer test rig. Additional information is included in the original extended abstract.
This paper is concerned with utilizing the acoustic analogy approach to predict the sound from unheated supersonic jets. Previous attempts have been unsuccessful at making such predictions over the Mach number range of practical interest. The present paper, therefore, focuses on implementing the necessary refinements needed to accomplish this objective. The important effects influencing peak supersonic noise turn out to be source convection, mean flow refraction, mean flow amplification, and source non-compactness. It appears that the last two effects have not been adequately dealt with in the literature. The first of these because the usual parallel flow models produce most of the amplification in the so called critical layer where the solution becomes singular and, therefore, causes the predicted sound field to become infinite as well. We deal with this by introducing a new weakly non parallel flow analysis that eliminates the critical layer singularity. This has a strong effect on the shape of the peak noise spectrum. The last effect places severe demands on the source models at the higher Mach numbers because the retarded time variations significantly increase the sensitivity of the radiated sound to the source structure in this case. A highly refined (non-separable) source model is, therefore, introduced in this paper.
NGC 4194 is a post-merger starburst known as The Medusa for its striking tidal features.We present here a detailed study of the structure and kinematics of ionized gas in the central 0.65 kpc of the Medusa. The data include radio continuum maps with resolution up to 0".18 (35 pc) and a 12.8 micron [Ne II] data cube with spectral resolution approx. 4 km/s: the first high-resolution, extinction-free observations of this remarkable object. The ionized gas has the kinematic signature of a core in solid-body rotation. The starburst has formed a complex of bright compact H II regions, probably excited by deeply embedded super star clusters, but none of these sources is a convincing candidate for a Galactic nucleus. The nuclei of the merger partners that created the Medusa have not yet been identified.
This plan describes the post irradiation examination (PIE) activities to be performed by Oak Ridge National Laboratory (ORNL) on irradiated Compact 1-4 taken from the Advanced Gas Reactor (AGR) experiment, AGR-3/4. This work will be performed in accordance with the general objectives outlined in the AGR 3/4 PIE Plan and guidance in the ORNL PIE Statement of Work.
This plan describes the post irradiation examination (PIE) oxidation testing activities to be performed by Oak Ridge National Laboratory (ORNL) on individual particles from Compact 5 4 2 taken from the Advanced Gas Reactor (AGR) experiment, AGR 2. This work will be performed in accordance with the general objectives outlined in the AGR 2 PIE Plan1 and guidance in the ORNL PIE Statement of Work.
This plan describes the post irradiation examination (PIE) oxidation testing activities to be performed by Oak Ridge National Laboratory (ORNL) on individual particles from Compact 5 4 2 taken from the Advanced Gas Reactor (AGR) experiment, AGR 2. This work will be performed in accordance with the general objectives outlined in the AGR 2 PIE Plan1 and guidance in the ORNL PIE Statement of Work.
The PARFUME (PARticle Fuel ModEl) fuel performance modeling code and the BISON nuclear fuel performance application built on the Multiphysics Object-Oriented Simulation Environment (MOOSE) finite element library were used to predict the fission product release from tristructural isotropic (TRISO) coated fuel particles and compacts during the third and fourth irradiation experiment of the Advanced Gas Reactor (AGR-3/4) Fuel Development and Qualification Program. The fuel performance modeling codes PARFUME and BISON modeled the AGR-3/4 irradiation experiment using the fuel compact time-averaged volume averaged (TAVA) daily temperatures for a total irradiation duration of 369.1 effective full power days (EFPD) to predict the release fraction of the fission product silver (Ag-110m) from a representative TRISO-coated fuel particle from AGR-3/4 compacts. Post-irradiation examination (PIE) measurements provided data on the release of these fission products in the compacts outside of the silicon carbide (SIC) layer. The PARFUME and BISON results were then compared to the silver release measured from compact gamma scanning. The results showed good agreement between PARFUME and BISON but both codes under-predicted the silver release fraction for all the compacts. In addition, BISON was used to model and predict the fission product concentration radial profile outside of the compacts in capsules’ inner and outer rings. These rings were either comprised of matrix and/or structural graphite. To obtain the concentration profiles of silver, cesium, and strontium, a sorption isotherm model was developed in BISON to capture the effects of fission product transport across the gaps between the concentric rings. The general shape of the concentration radial profiles as calculated by BISON were similar in the inner ring (IR) but varied in the outer ring (OR) depending on the fission product of interest or capsule temperature. Using this methodology and model, BISON now has the capability to aid in developing new fission product diffusion coefficients for matrix or structural graphite materials.