Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud parameterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Cloud and circulation feedbacks in a near‐global aquaplanet cloud‐resolving model

Abstract A near‐global aquaplanet cloud‐resolving model (NGAqua) with fixed meridionally varying sea‐surface temperature (SST) is used to investigate cloud feedbacks due to three climate perturbations: a uniform 4 K SST increase, a quadrupled‐CO 2 concentration, and both combined. NGAqua has a horizontal resolution of 4 km with no cumulus parameterization. Its domain is a zonally periodic 20,480 km‐long tropical channel, spanning 46°S–N. It produces plausible mean distributions of clouds, rainfall, and winds. After spin‐up, 80 days are analyzed for the control and increased‐SST simulations, and 40 days for those with quadrupled CO 2 . The Intertropical Convergence Zone width and tropical cloud cover are not strongly affected by SST warming or CO 2 increase, except for the expected upward shift in high clouds with warming, but both perturbations weaken the Hadley circulation. Increased SST induces a statistically significant increase in subtropical low cloud fraction and in‐cloud liquid water content but decreases midlatitude cloud, yielding slightly positive domain‐mean shortwave cloud feedbacks. CO 2 quadrupling causes a slight shallowing and a statistically insignificant reduction of subtropical low cloud fraction. Warming‐induced low cloud changes are strongly correlated with changes in estimated inversion strength, which increases modestly in the subtropics but decreases in the midlatitudes. Enhanced clear‐sky boundary layer radiative cooling in the warmer climate accompanies the robust subtropical low cloud increase. The probability distribution of column relative humidity across the tropics and subtropics is compared between the control and increased‐SST simulations. It shows no evidence of bimodality or increased convective aggregation in a warmer climate.

58 GEOSCIENCES↗
DOE OSTI2019

Dust Radiative Effects on Climate by Glaciating Mixed-Phase Clouds

Mineral dust plays an important role in the primary formation of ice crystals in mixed-phase clouds by acting as ice nucleating particles (INPs). It can influence the cloud phase transition and radiative forcing of mixed-phase clouds, both of which are crucial to global energy budget and climate. In this study, we investigate the dust indirect effects on mixed-phase clouds through heterogeneous ice nucleation with the U.S. Department of Energy (DOE) Energy Exascale Earth System Model (E3SM). Dust and INP concentrations simulated from two versions of E3SM with three ice nucleation parameterizations were evaluated against observations in the Northern Hemisphere. Constrained by these observations, E3SM shows that dust INPs induce a global mean net cloud radiative effect of 0.05 to 0.26 W/m 2 with the predominant warming appearing in the Northern Hemisphere midlatitudes. However, a cooling effect is found in the Arctic due to reduced longwave cloud forcing.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2003

Dynamic Turbulence Modelling in Large-eddy Simulations of the Cloud-topped Atmospheric Boundary Layer

The use of large eddy simulation, or LES, to study the atmospheric boundary layer dates back to the early 1970s when Deardor (1972) used a three-dimensional simulation to determine velocity and temperature scales in the convective boundary layer. In 1974 he applied LES to the problem of mixing layer entrainment (Deardor 1974) and in 1980 to the cloud-topped boundary layer (Deardor 1980b). Since that time the LES approach has been applied to atmospheric boundary layer problems by numerous authors. While LES has been shown to be relatively robust for simple cases such as a clear, convective boundary layer (Mason 1989), simulation of the cloud-topped boundary layer has proved more of a challenge. The combination of small length scales and anisotropic turbulence coupled with cloud microphysics and radiation effects places a heavy burden on the turbulence model, especially in the cloud-top region. Consequently, over the past few decades considerable effort has been devoted to developing turbulence models that are better able to parameterize these processes. Much of this work has involved taking parameterizations developed for neutral boundary layers and deriving corrections to account for buoyancy effects associated with the background stratification and local buoyancy sources due to radiative and latent heat transfer within the cloud (see Lilly 1962; Deardor 1980a; Mason 1989; MacVean & Mason 1990, for example). In this paper we hope to contribute to this effort by presenting a number of turbulence models in which the model coefficients are calculated dynamically during the simulation rather than being prescribed a priori.

Kirkpatrick, M. P.↗
DOE OSTI2023

Frozen Hydrometeor Terminal Fall Velocity Dependence on Particle Habit and Riming as Observed by Vertically Pointing Radars

Vertically pointing Ka-band radar measurements are used to derive fall velocity–reflectivity factor ($V$ t = $aZ$$^{b}_{e}$) relations for frozen hydrometeor populations of different habits during snowfall events observed at Oliktok Point, Alaska, and at the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC). Case study events range from snowfall with highly rimed particles observed during periods with large amounts of supercooled liquid water path (LWP > 320 g m –2 ) to unrimed snowflakes including instances when pristine planar crystals were the dominant frozen hydrometeor habit. The prefactor a and the exponent b in the observed $V$ t –$Z$ e relations scaled to the sea level vary in the approximate ranges 0.5–1.4 and 0.03–0.13, respectively (reflectivities are in mm 6 m –3 and velocities are in m s –1 ). The coefficient a values are the smallest for planar crystals (a ~ 0.5) and the largest (a > 1.2) for particles under severe riming conditions with high LWP. There is no clear distinction between b values for high and low LWP conditions. The range of the observed $V$ t –$Z$ e relation coefficients is in general agreement with results of modeling using fall velocity–size (υ t = αD β ) relations for individual particles found in literature for hydrometeors of different habits, though there is significant variability in α and β coefficients from different studies even for a same particle habit. Correspondences among coefficients in the $V$ t –$Z$ e relations for particle populations and in the individual particle υ t –$D$ relations are analyzed. Furthermore, these correspondences and the observed $V$ t –$Z$ e relations can be used for evaluating different frozen hydrometeor fall velocity parameterizations in models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluation of Model Summertime Boundary Layer Cloud Development over Complex Terrain in New York State

Weather forecasting over complex terrain with diverse land cover is challenging. Utilizing the high-resolution observations from New York State Mesonet (NYSM), we are able to evaluate the surface processes of the Weather Research Forecast (WRF) Model in a detailed, scale-dependent manner. Here, in the study, possible impacts of land–atmosphere interaction on surface meteorology and boundary layer cloud development are investigated with different model resolutions, land surface models (LSMs), and planetary boundary layer (PBL) physical parameterizations. The High-Resolution Rapid Refresh, version 3 (HRRR), forecasting model is used as a reference for the sensitivity evaluation. Results show that over complex terrain, the high-resolution simulations (1 km × 60 vertical levels) generally perform better compared to low-resolution (3 km × 50 levels) in both surface meteorology and cloud fields. LSMs play a more important role in surface meteorology compared to PBL schemes. The NoahMP land surface model exhibits daytime warmer and drier biases compared to the Rapid Update Cycle (RUC) due to better prediction of the Bowen ratio in RUC. The PBL schemes would affect the convective strength in the boundary layer. The Shin–Hong (SH) scale-aware scheme tends to produce the strongest convective strength in the PBL, while the ACM2 PBL scheme rarely resolved convection even at 1-km resolution. By considering the radiation effect of subgrid-scale (SGS) clouds, the Mellor–Yamada–Nakanishi–Niino eddy diffusivity mass flux (MYNN-EDMF) predicted the highest cloud coverage and lowest surface solar radiation bias. The configuration of SGS clouds in MYNN-EDMF would not only significantly reduce shortwave radiation bias, but also affect the convection behaviors through land surface–cloud–radiation interaction.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2008

Atmospheric Correction at AERONET Locations: A New Science and Validation Data Set

This paper describes an AERONET-based Surface Reflectance Validation Network (ASRVN) and its dataset of spectral surface bidirectional reflectance and albedo based on MODIS TERRA and AQUA data. The ASRVN is an operational data collection and processing system. It receives 50x50 square kilometer subsets of MODIS L1B data from MODAPS and AERONET aerosol and water vapor information. Then it performs an accurate atmospheric correction for about 100 AERONET sites based on accurate radiative transfer theory with high quality control of the input data. The ASRVN processing software consists of L1B data gridding algorithm, a new cloud mask algorithm based on a time series analysis, and an atmospheric correction algorithm. The atmospheric correction is achieved by fitting the MODIS top of atmosphere measurements, accumulated for 16-day interval, with theoretical reflectance parameterized in terms of coefficients of the LSRT BRF model. The ASRVN takes several steps to ensure high quality of results: 1) cloud mask algorithm filters opaque clouds; 2) an aerosol filter has been developed to filter residual semi-transparent and sub-pixel clouds, as well as cases with high inhomogeneity of aerosols in the processing area; 3) imposing requirement of consistency of the new solution with previously retrieved BRF and albedo; 4) rapid adjustment of the 16-day retrieval to the surface changes using the last day of measurements; and 5) development of seasonal back-up spectral BRF database to increase data coverage. The ASRVN provides a gapless or near-gapless coverage for the processing area. The gaps, caused by clouds, are filled most naturally with the latest solution for a given pixels. The ASRVN products include three parameters of LSRT model (k(sup L), k(sup G), k(sup V)), surface albedo, NBRF (a normalized BRF computed for a standard viewing geometry, VZA=0 deg., SZA=45 deg.), and IBRF (instantaneous, or one angle, BRF value derived from the last day of MODIS measurement for specific viewing geometry) for MODIS 500m bands 1-7. The results are produced daily at resolution of 1 km in gridded format. We also provide cloud mask, quality flag and a browse bitmap image. The new dataset can be used for a wide range of applications including validation analysis and science research.

Wang, Yujie↗
NASA NTRS2015

Remote Sensing of Cloud Top Heights Using the Research Scanning Polarimeter

Clouds cover roughly two thirds of the globe and act as an important regulator of Earth's radiation budget. Of these, multilayered clouds occur about half of the time and are predominantly two-layered. Changes in cloud top height (CTH) have been predicted by models to have a globally averaged positive feedback, however observational changes in CTH have shown uncertain results. Additional CTH observations are necessary to better and quantify the effect. Improved CTH observations will also allow for improved sub-grid parameterizations in large-scale models and accurate CTH information is important when studying variations in freezing point and cloud microphysics. NASA's airborne Research Scanning Polarimeter (RSP) is able to measure cloud top height using a novel multi-angular contrast approach. RSP scans along the aircraft track and obtains measurements at 152 viewing angles at any aircraft location. The approach presented here aggregates measurements from multiple scans to a single location at cloud altitude using a correlation function designed to identify the location-distinct features in each scan. During NASAs SEAC4RS air campaign, the RSP was mounted on the ER-2 aircraft along with the Cloud Physics Lidar (CPL), which made simultaneous measurements of CTH. The RSPs unique method of determining CTH is presented. The capabilities of using single and combinations of channels within the approach are investigated. A detailed comparison of RSP retrieved CTHs with those of CPL reveal the accuracy of the approach. Results indicate a strong ability for the RSP to accurately identify cloud heights. Interestingly, the analysis reveals an ability for the approach to identify multiple cloud layers in a single scene and estimate the CTH of each layer. Capabilities and limitations of identifying single and multiple cloud layers heights are explored. Special focus is given to sources of error in the method including optically thin clouds, physically thick clouds, multi-layered clouds as well as cloud phase. When determining multi-layered CTHs, limits on the upper clouds opacity are assessed.

Cloud height indicators↗
DOE OSTI2023

Informed Multi‐Scale Approach Applied to the British Columbia Fires of Late Summer 2017

Abstract Pyrocumulonimbus (PyroCb) clouds have a complex origin dependent on fire dynamics and meteorological conditions. When a pyrocumulonimbus cloud develops and is maintained over a period of time, it can inject significant aerosol into the troposphere and lower stratosphere, resulting in a longer‐term (months to years) occurrence of aerosol in the stratosphere. In this work, we investigate the British Columbia wildfires on 12–13 August 2017 using a multi‐scale simulation framework. We use the output of a physics‐based wildfire model (FIRETEC) with parameterized energy, particle, and gas emissions to drive the upper atmospheric aerosol mass injection within a regional cloud resolving model (HIGRAD). We demonstrate that vertical motions produced by latent heat release of the condensation of ice and cloud particles within the PyroCbs induce another 5 km of lifting of the simulated aerosol plume. Primary black carbon and organic aerosols (OAs) alone may not be enough to explain the observed aerosol burden, thus we show that secondary OA produced via condensation of gases by the fires, ash, and possibly dust can enhance lofted aerosol mass. A simulation with all emission mechanisms active, driven by the observed fuel load and environmental conditions, reasonably reproduces an aerosol profile inferred from observational data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Single–Column Model Simulations of Subtropical Marine Boundary–Layer Cloud Transitions Under Weakening Inversions

Results are presented of the GASS/EUCLIPSE single-column model inter-comparison study on the subtropical marine low-level cloud transition. A central goal is to establish the performance of state-of-the-art boundary-layer schemes for weather and climate models for this cloud regime, using large-eddy simulations of the same scenes as a reference. A novelty is that the comparison covers four different cases instead of one, in order to broaden the covered parameter space. Three cases are situated in the North-Eastern Pacific, while one reflects conditions in the North-Eastern Atlantic. A set of variables is considered that reflects key aspects of the transition process, making use of simple metrics to establish the model performance. Using this method some longstanding problems in low level cloud representation are identified. Considerable spread exists among models concerning the cloud amount, its vertical structure and the associated impact on radiative transfer. Here, the sign and amplitude of these biases differ somewhat per case, depending on how far the transition has progressed. After cloud breakup the ensemble median exhibits the well-known “too few too bright” problem. The boundary layer deepening rate and its state of decoupling are both underestimated, while the representation of the thin capping cloud layer appears complicated by a lack of vertical resolution. Encouragingly, some models are successful in representing the full set of variables, in particular the vertical structure and diurnal cycle of the cloud layer in transition. An intriguing result is that the median of the model ensemble performs best, inspiring a new approach in subgrid parameterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

What Polarimetric Weather Radars Offer to Cloud Modelers: Forward Radar Operators and Microphysical/Thermodynamic Retrievals

The utilization of polarimetric weather radars for optimizing cloud models is a next frontier of research. It is widely understood that inadequacies in microphysical parameterization schemes in numerical weather prediction (NWP) models is a primary cause of forecast uncertainties. Due to its ability to distinguish between hydrometeors with different microphysical habits and to identify “polarimetric fingerprints” of various microphysical processes, polarimetric radar emerges as a primary source of needed information. There are two approaches to leverage this information for NWP models: (1) radar microphysical and thermodynamic retrievals and (2) forward radar operators for converting the model outputs into the fields of polarimetric radar variables. In this paper, we will provide an overview of both. Polarimetric measurements can be combined with cloud models of varying complexity, including ones with bulk and spectral bin microphysics, as well as simplified Lagrangian models focused on a particular microphysical process. Combining polarimetric measurements with cloud modeling can reveal the impact of important microphysical agents such as aerosols or supercooled cloud water invisible to the radar on cloud and precipitation formation. Some pertinent results obtained from models with spectral bin microphysics, including the Hebrew University cloud model (HUCM) and 1D models of melting hail and snow coupled with the NSSL forward radar operator, are illustrated in the paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Factors Governing Cloud Growth and Entrainment Rates in Shallow Cumulus and Cumulus Congestus During GoAmazon2014/5

Shallow cumulus and cumulus congestus clouds play an important role in the large-scale tropical circulation by mixing heat and moisture vertically and preconditioning the environment for deeper convection. Different representations of these shallow clouds account for much of the spread in General Circulation Model (GCMs) climate sensitivity, potentially because of how entrainment is represented in GCM parameterizations. This study uses observations from the Department of Energy's Atmospheric Radiation Measurement (ARM) mobile facility deployed at Manacapuru, Brazil, during the Green Ocean Amazon (GoAmazon2014/5) Campaign. Environmental thermodynamic profiles and observations of cloud top height (CTH) are used to constrain an entraining plume model to estimate bulk entrainment rates (ERs). Estimates of CTH are obtained from a combination of vertically pointing W-band ARM cloud radar and 1,290 MHz Radar Wind Profiler observations. A combination of radiosonde, microwave radiometer profiler, and microwave radiometer observations provides new best estimates of the environmental thermodynamic state. We quantify uncertainty in ERs considering uncertainties in estimated CTH, environmental thermodynamic properties, and assumed initial parcel characteristics. We find ERs ranging from 0.16 to 2.8 km -1 with an average of 0.58 ± 0.10 km -1 over a selected population of 469 shallow cumulus and cumulus congestus clouds. Using the retrieved estimates of ER, we evaluate several entrainment closures that are currently used in atmospheric models or have been proposed based on theory or large eddy simulation. Finally, entrainment rates in cumulus clouds are weakly correlated with low-level buoyancy, cloud depth, and cloud size.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

Horizontal Variability of Water and Its Relationship to Cloud Fraction near the Tropical Tropopause: Using Aircraft Observations of Water Vapor to Improve the Representation of Grid-scale Cloud Formation in GEOS-5

Large-scale models such as GEOS-5 typically calculate grid-scale fractional cloudiness through a PDF parameterization of the sub-gridscale distribution of specific humidity. The GEOS-5 moisture routine uses a simple rectangular PDF varying in height that follows a tanh profile. While below 10 km this profile is informed by moisture information from the AIRS instrument, there is relatively little empirical basis for the profile above that level. ATTREX provides an opportunity to refine the profile using estimates of the horizontal variability of measurements of water vapor, total water and ice particles from the Global Hawk aircraft at or near the tropopause. These measurements will be compared with estimates of large-scale cloud fraction from CALIPSO and lidar retrievals from the CPL on the aircraft. We will use the variability measurements to perform studies of the sensitivity of the GEOS-5 cloud-fraction to various modifications to the PDF shape and to its vertical profile.

climate modeling↗
DOE OSTI2020

Implementation of a Quasi-3D Multiscale Modeling Framework to ACME

Representation of unresolved cloud processes has been one of the most challenging problems in numerical modeling of the atmosphere. During the last decades, considerable efforts have been spent to better represent the collective effects of those processes in terms of resolved scales (see Arakawa 2004 for a review). Still, the progress on this problem has been unacceptably slow as pointed out by Randall et al. (2003). The large part of the difficulty is inherent in the artificial separation of atmospheric processes into the explicitly simulated resolved scales and the highly parameterized subgrid scales. Arakawa (2004) and Arakawa et al. (2011) suggested two plausible approaches to eliminate the problem of artificial separation ofatmospheric processes: “parameterize everything” and “resolve everything”.

58 GEOSCIENCES↗
DOE OSTI2020

Use of Remote Sensing and In-situ Observations to Develop and Evaluate Improved Representations of Convection and Clouds for the Accelerated Climate Model for Energy. Final report

Representation of unresolved cloud processes has been one of the most challenging problems in numerical modeling of the atmosphere. During the last decades, considerable efforts have been spent to better represent the collective effects of those processes in terms of resolved scales (see Arakawa 2004 for a review). Still, the progress on this problem has been unacceptably slow as pointed out by Randall et al. (2003). The large part of the difficulty is inherent in the artificial separation of atmospheric processes into the explicitly simulated resolved scales and the highly parameterized subgrid scales. Arakawa (2004) and Arakawa et al. (2011) suggested two plausible approaches to eliminate the problem of artificial separation of atmospheric processes: “parameterize everything” and “resolve everything”.

58 GEOSCIENCES↗
DOE OSTI2019

Reconciling differences between large-eddy simulations and Doppler-lidar observations of continental shallow cumulus cloud-base vertical velocity

We investigate a significant model-observation difference found between cloud-base vertical velocity for continental shallow cumulus simulated using large-eddy simulations (LES) and observed by Doppler lidar measurements over the U.S. Southern Great Plains ARM Facility. The LES cloud-base vertical velocity is dominated by updrafts that are consistent with a general picture for convective clouds but is inconsistent with Doppler lidar observations that also show the presence of considerable downdrafts. The underestimation of simulated downdrafts is found to be a robust feature, being insensitive to various numerical, physical, or dynamical choices. We find that simulations can more closely reproduce observations only after improving the model physics to use size-resolved microphysics and horizontal longwave radiation, both of which modify the cloud buoyancy and velocity structure near cloud side edges. The results suggest that treatments that capture these structures are needed for the proper simulation and subsequent parameterization development of shallow cumulus vertical transport.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

The GFDL Global Atmosphere and Land Model AM4.0/LM4.0: 2. Model Description, Sensitivity Studies, and Tuning Strategies

Here, in Part 2 of this two–part paper, documentation is provided of key aspects of a version of the AM4.0/LM4.0 atmosphere/land model that will serve as a base for a new set of climate and Earth system models (CM4 and ESM4) under development at NOAA's Geophysical Fluid Dynamics Laboratory (GFDL). The quality of the simulation in AMIP (Atmospheric Model Intercomparison Project) mode has been provided in Part 1. Part 2 provides documentation of key components and some sensitivities to choices of model formulation and values of parameters, highlighting the convection parameterization and orographic gravity wave drag. The approach taken to tune the model's clouds to observations is a particular focal point. Care is taken to describe the extent to which aerosol effective forcing and Cess sensitivity have been tuned through the model development process, both of which are relevant to the ability of the model to simulate the evolution of temperatures over the last century when coupled to an ocean model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Ice‐Nucleating Particles That Impact Clouds and Climate: Observational and Modeling Research Needs

Abstract Atmospheric ice‐nucleating particles (INPs) play a critical role in cloud freezing processes, with important implications for precipitation formation and cloud radiative properties, and thus for weather and climate. Additionally, INP emissions respond to changes in the Earth System and climate, for example, desertification, agricultural practices, and fires, and therefore may introduce climate feedbacks that are still poorly understood. As knowledge of the nature and origins of INPs has advanced, regional and global weather, climate, and Earth system models have increasingly begun to link cloud ice processes to model‐simulated aerosol abundance and types. While these recent advances are exciting, coupling cloud processes to simulated aerosol also makes cloud physics simulations increasingly susceptible to uncertainties in simulation of INPs, which are still poorly constrained by observations. Advancing the predictability of INP abundance with reasonable spatiotemporal resolution will require an increased focus on research that bridges the measurement and modeling communities. This review summarizes the current state of knowledge and identifies critical knowledge gaps from both observational and modeling perspectives. In particular, we emphasize needs in two key areas: (a) observational closure between aerosol and INP quantities and (b) skillful simulation of INPs within existing weather and climate models. We discuss the state of knowledge on various INP particle types and briefly discuss the challenges faced in understanding the cloud impacts of INPs with present‐day models. Finally, we identify priority research directions for both observations and models to improve understanding of INPs and their interactions with the Earth System.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Understanding the Microphysical Control and Spatial‐Temporal Variability of Warm Rain Probability Using CloudSat and MODIS Observations

Abstract By combining measurements from MODIS and the CloudSat radar, we develop a parameterization scheme to quantify the combined microphysical controls by liquid water path (LWP) and cloud droplet number concentration (CDNC) of the probability of precipitation (PoP) in marine low cloud over tropical oceans. We demonstrate that the spatial‐temporal variation of grid‐mean in‐cloud can be largely explained by the variation of the joint probability density function of LWP and CDNC in the phase space specified by the bivariate PoP (LWP and CDNC) function. Through a series of sensitivity tests guided by this understanding, we find that in the Southeastern Pacific and Atlantic the stratocumulus to cumulus transition of the is mainly due to the variation of CDNC while the annual cycle is mainly due to the variation of LWP. The results of this study provide a viable way to diagnose the root cause of warm rain problems in global climate models.

54 ENVIRONMENTAL SCIENCES↗