Measurement of Magnetic Field Using System-On-Chip Sensors
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
In this work, we implemented an innovative approach to the fabrication of a complete micro/nano fluidic system, based on direct nanoimprint lithography. A master silicon stamp with the multilevel structures is fabricated first, and then a negative replica is made, to be used as a stamp for ultraviolet nanoimprint lithography (UV-NIL). Afterwards, just one single UV-NIL step is necessary for patterning all the the micro and nanostructures. Furthermore, the devices are made of all-transparent materials, and the method allows flexibility for the type of substrates used.
Demands for high density and high speed interconnect solutions are not satisfied by current technology offerings. Platforms such as printed circuit boards (PCBs), ceramic substrates and silicon interposers don’t provide the small form factor nor the I/O density to support 5G or 1Tbps gigabit ethernet solutions. Current solutions also don’t support die to die assembly with integrated tiled solutions for wide area and fanout solutions for lager data and signal processing. A solution with through vias provides an order of magnitude or smaller density supporting much higher density attach and assembly By fabricating a very fine pitch metal filled through glass via solution it’s possible to deliver the necessary improvements in performance, reliability, even higher data speed rates with smaller area and much denser geometries. There are a number of opportunities across a wide variety of industries for through glass interposers as they become the replacement for printed circuit boards (PCBs) and ceramic substrates. The broad array of opportunities include renewable energy, medical electronics (ME), defense electronics (DE)/space and consumer electronics (CE), but likely will impact every industry and market segment. Compared to PCBs, through glass via (TGV) solutions provide the next generation platform for semiconductor assembly improvements. The ability to generate lines, spaces, trenches and vias similar to wafer level geometries delivers wired solutions one to two orders of magnitude smaller than traditional organic PCB and ceramic substrate offerings. Higher density connections also include the thru vias that connect multiple metal layers, fanout. It’s possible to deliver filled metal vias that are 20um diameter with much tighter pitch than can be offered with PCB. Our goal is to provide 20um diameter and smaller via, 50um and smaller pitch, and aspect ratios at 25:1 and greater with hermetically metal filled vias. The goal of CVI is to replace or eliminate PCBs, ceramic substrate and through silicon vias (TSV) providing a glass interposer with metal filled, fiber plugged and/or optional wireless interconnectivity. The end plan is to deliver a glass substrate platform that provides improved electrical performance, versatility, inertness, and much improved cost and cycle time (development, drawing, and delivery) to performance in the form of small millimeter sized substrates or full 8” wafer substrates. Glass delivers an improvement over silicon thru vias (TSV) in the number of processing steps, cost, reliability and cycle time. In addition to metal plugged vias, our glass interposers are capable of fiber and antennae solutions providing two additional very high density and ultra-high speed data transfer capabilities.
The neuromuscular junction (NMJ) is the active connection between a motor neuron and muscle. There are no simple, cheap assays for screening compounds affecting the neuromuscular junction.
Preprocessing is a crucial step in the utilization of biomass feedstocks for the production of fuel and biomaterials [1]. Size reduction and drying of the material, where used, are two of the most costly and energy intensive operations that are undertaken during preprocessing, reduction of the energy usage during these two phases will reduce cost of processing and ultimately reduce the overall cost to the final user. Traditionally, a hammer mill has been the primary method used for secondary size reduction. For wet material, a hammer mill requires high amounts of energy, while for dry material the hammer mill produces a large quantity of small particles [2]. In both cases, the costs increase either from additionally needed fuel cost or from the cost of lost material. In effort to lower the cost for size reduction, a rotary shear has been developed for the comminution of biomass feedstocks. The rotary shear utilizes interlocking, rotating disk that shear the material rather than using impact to reduce the particle size of the materials. Because the material is size reduced using a cutting motion, rather than impact, the distribution of particle sizes is much narrower than produced by hammer mills.
This process includes all inputs for the raw material acquisition, raw material transportation, energy conversion, product transport, and end use for 1 MJ of combusted blended conventional and F-T jet fuel. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=C5975007-67A1-47A5-8CA3-F5C4015271D2
This process includes all inputs for the raw material acquisition, raw material transportation, energy conversion, product transport, and end use for 1 MJ of combusted blended conventional and F-T jet fuel. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=30F5171E-B336-4A48-8AC1-1337A827F6DC
In the early 1940s, organophosphates used in insecticides were discovered to act as chemical nerve agents. The most common nerve agents are: isopropyl methylphosphonofluoridate (sarin), ethyl dimethylphosphoramidocyanidate (tabun), and S-2-diisopropylaminoethyl O-ethyl methylphosphonothioate (VX). These nerve agents are responsible for causing acetylcholinesterase (AChE) inhibition which leads to acetylcholine gathering in the synapses. This accumulation causes hyperactivity in the nervous system which causes seizures, bradycardia, respiratory paralysis, and eventually death. For this study, the effects of a sarin chemical surrogate, 4-nitrophenyl isopropyl methylphosphonate (NIMP), was evaluated along with the pre-treatment, pyridostigmine bromide (PB) on 3D cultures of human neurons placed on the novel multi-electrode array (MEA). Neuronal spiking and bursting activity was monitored throughout the experiment and levels of cytotoxicity were determined using the lactate dehydrogenase (LDH) assay. In addition, in-vivo analysis was performed for comparison.
The potential for new, re-emerging, or engineered pandemic threats could challenge our nation's biosecurity, requiring rapid and flexible countermeasure development platforms. In healthcare, one of the main hindrances to the timely development of protein-based therapeutics for cancer, infectious disease, and other diseases has been a slow and expensive quality-controlled production stage. We present a protein-based technology that has the potential to address these crucial problems in biosecurity and healthcare by maximizing protein production and system portability, while minimizing production latency and cost. Specifically, we have developed a reusable, portable first-generation platform that leverages the advantages of cell-free protein synthesis (CFPS) and flow cells to create practical amounts of clinically relevant therapeutics. We have demonstrated that this technology is reusable and programmable, enabling a single platform that can synthesize multiple dosages of various therapeutics and vaccine in the field. Implementing this technology could mitigate pandemic threats by providing a rapidly-deployable (just-in-time), versatile (precision medicine) production of biologic therapeutics to the infected patient’s locale (point-of-care). In drug development, once promising drug variations are identified, the platform can be scaled to quickly produce practical amounts of protein for patient testing in the matter of days (vs. months) at a fraction of the cost of existing technology.
Single photon detection (SPD) plays an important role in many forefront areas of fundamental science and advanced engineering applications. In recent years, rapid developments in superconducting quantum computation, quantum key distribution, and quantum sensing call for SPD in the microwave frequency range. We have explored in this LDRD project a new approach to SPD in an effort to provide deterministic photon-number-resolving capability by using topological Josephson junction structures. In this SAND report, we will present results from our experimental studies of microwave response and theoretical simulations of microwave photon number resolving detector in topological Dirac semimetal Cd 3 As 2 . These results are promising for SPD at the microwave frequencies using topological quantum materials.
Explore the source record for details and available documents.
Abstract not provided.
Explore the source record for details and available documents.
The overall goal of the project was to build a low-cost digital CO 2 sensor made of N5’s patented sensing architecture using a digital application specific integrated circuit (ASIC) to reduce the amount of energy usage in residential and commercial buildings. The proposed small form-factor CO 2 monitoring device contains a molecular sieve membrane filter capable of monitoring indoor air quality which indicates the content of CO 2 inside a residential or commercial building.