Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalogues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Observing Strategies for Focused Orbital Debris Surveys Using the Magellan Telescope

A breakup of the Titan 3C-17 Transtage rocket body was reported to have occurred on June 4th, 2014 at 02:38 UT by the Space Surveillance Network (SSN). Five objects were associated with this breakup and this is the fourth breakup known for this class of object. There are likely many more objects associated with this event that are not within the Space Surveillance Network's ability to detect and have not been catalogued. Several months after the breakup, observing time was obtained on the Magellan Baade 6.5 meter telescope to be used for observations of geosynchronous (GEO) space debris targets. Using the NASA Standard Satellite Breakup Model (SSBM), a simulated debris cloud of the recent Transtage breakup was produced and propagated forward in time. This provided right ascension, declination, and tracking rate predictions for where debris associated with this breakup may be more likely to be found in the sky over Magellan for our observing run. Magellan observations were then optimized using the angles and tracking rates from the model predictions to focus the search for Transtage debris. Data were collected and analysed and preliminary comparisons made between the number of objects detected and the number expected from the model. We present our results here.

Frith, James↗

Use of a Closed-Loop Tracking Algorithm for Orientation Bias Determination of an S-Band Ground Station

The Space Communications and Navigation (SCaN) Testbed project completed installation and checkout testing of a new S-Band ground station at the NASA Glenn Research Center in Cleveland, Ohio in 2015. As with all ground stations, a key alignment process must be conducted to obtain offset angles in azimuth (AZ) and elevation (EL). In telescopes with AZ-EL gimbals, this is normally done with a two-star alignment process, where telescope-based pointing vectors are derived from catalogued locations with the AZ-EL bias angles derived from the pointing vector difference. For an antenna, the process is complicated without an optical asset. For the present study, the solution was to utilize the gimbal control algorithms closed-loop tracking capability to acquire the peak received power signal automatically from two distinct NASA Tracking and Data Relay Satellite (TDRS) spacecraft, without a human making the pointing adjustments. Briefly, the TDRS satellite acts as a simulated optical source and the alignment process proceeds exactly the same way as a one-star alignment. The data reduction process, which will be discussed in the paper, results in two bias angles which are retained for future pointing determination. Finally, the paper compares the test results and provides lessons learned from the activity.

reflector antenna↗

Planetary CubeSats Come of Age

Jet Propulsion Laboratory initiatives in developing and formulating planetary CubeSats are described. Six flight systems already complete or underway now at JPL for missions to interplanetary space, the Moon, a near-Earth asteroid, and Mars are described at the subsystem level. Key differences between interplanetary nanospacecraft and LEO CubeSats are explained, as well as JPL's adaptation of vendor components and development of system solutions to meet planetary-mission needs. Feasible technology-demonstration and science measurement objectives are described for multiple modes of planetary mission implementation. Seven planetary-science demonstration mission concepts, already proposed to NASA by Discovery-2014 PIs partnered with JPL, are described for investigations at Sun-Earth L5, Venus, NEA 1999 FG3, comet Tempel 2, Phobos, main-belt asteroid 24 Themis, and metal asteroid 16 Psyche. The JPL staff and facilities resources available to PIs for analysis, design, and development of planetary nanospacecraft are catalogued.

TDO↗

NASA's Optical Program on Ascension Island: Bringing MCAT to Life as the Eugene Stansbery-Meter Class Autonomous Telescope (ES-MCAT)

In June 2015, the construction of the Meter Class Autonomous Telescope was completed and MCAT saw the light of the stars for the first time. In 2017, MCAT was newly dedicated as the Eugene Stansbery-MCAT telescope by NASA's Orbital Debris Program Office (ODPO), in honor of his inspiration and dedication to this newest optical member of the NASA ODPO. Since that time, MCAT has viewed the skies with one engineering camera and two scientific cameras, and the ODPO optical team has begun the process of vetting the entire system. The full system vetting includes verification and validation of: (1) the hardware comprising the system (e.g. the telescopes and its instruments, the dome, weather systems, all-sky camera, FLIR cloud infrared camera, etc.), (2) the custom-written Observatory Control System (OCS) master software designed to autonomously control this complex system of instruments, each with its own control software, and (3) the custom written Orbital Debris Processing software for post-processing the data. ES-MCAT is now capable of autonomous observing to include Geosynchronous survey, TLE (Two-line element) tracking of individual catalogued debris at all orbital regimes (Low-Earth Orbit all the way to Geosynchronous (GEO) orbit), tracking at specified non-sidereal rates, as well as sidereal rates for proper calibration with standard stars. Ultimately, the data will be used for validation of NASA's Orbital Debris Engineering Model, ORDEM, which aids in engineering designs of spacecraft that require knowledge of the orbital debris environment and long-term risks for collisions with Resident Space Objects (RSOs).

Lederer, S. M.↗

Kepler Uniform Modeling of KOIs: MCMC Notes for Data Release 25

This document describes data products related to the reported planetary parameters and uncertainties for the Kepler Objects of Interest (KOIs) based on a Markov-Chain-Monte-Carlo (MCMC) analysis. Reported parameters, uncertainties and data products can be found at the NASA Exoplanet Archive . The codes used for this data analysis are available on the Github website (Rowe 2016). The relevant paper for details of the calculations is Rowe et al. (2015). The main differences between the model fits discussed here and those in the DR24 catalogue are that the DR25 light curves were used in the analysis, our processing of the MAST light curves took into account different data flags, the number of chains calculated was doubled to 200 000, and the parameters which are reported are based on a damped least-squares fit, instead of the median value from the Markov chain or the chain with the lowest 2 as reported in the past.

DR25↗

A Hybrid Line List for CH4 and Hot Methane Continuum

Molecular line lists (a catalogue of transition frequencies and line strengths) are important for modelling absorption and emission processes in atmospheres of different astronomical objects, such as cool stars and exoplanets. In order to be applicable for high temperatures, line lists for molecules like methane must contain billions of transitions, which makes their direct (line-by-line) application in radiative transfer calculations impracticable. Here we suggest a new, hybrid line list format to mitigate this problem, based on the idea of temperature-dependent absorption continuum. Methods. The line list is partitioned into a large set of relatively weak lines and a small set of important, stronger lines. The weaker lines are then used either to construct a temperature-dependent (but pressure-independent) set of intensity cross sections or are blended into a greatly reduced set of super-lines. The strong lines are kept in the form of temperature independent Einstein A coefficients. Results. A line list for methane is constructed as a combination of 17 million strong absorption lines relative to the reference absorption spectra and a background methane continuum in two temperature-dependent forms, of cross sections and super-lines. This approach eases the use of large high temperature line lists significantly as the computationally expensive calculation of pressure dependent profiles only need to be performed for a relatively small number of lines. Both the line list and cross sections were generated using a new 34 billion methane line list (34 to10), which extends the 10to10 line list to higher temperatures (up to 2000 K). The new hybrid scheme can be applied to any large line lists containing billions of transitions. We recommend to use super-lines generated on a high resolution grid based on resolving power R = 1,000,000 to model the molecular continuum as a more flexible alternative to the temperature dependent cross sections.

Line Profiles↗

Integrating Orbital Debris Measurements and Modeling - How Observations and Laboratory Data are used to Help Make Space Operations Safer

The NASA Orbital Debris Program Office has been statistically surveying human-made resident space objects (RSOs) in geocentric orbits for several decades, using optical and infrared telescopes. The prime goal has been to understand the evolving population and characteristics of debris generated by RSOs. The debris population includes any non-functioning RSO that no longer serves a useful purpose. Any object that cannot be purposely maneuvered, including non-functioning satellites, rocket bodies, and any object generated by a collision, explosion, or fragmentation event, may pose a future collisional threat to active satellites. Key questions immediately surface from this knowledge: What can we do to protect our precious functioning satellites from collisions? How do we design our satellites to prevent them from being future sources of debris? And what can we do as a society to protect the environment surrounding Earth to preserve it for future generations? To begin to address these questions, and to better understand this population as well as break-up events contributing to it, NASA has developed a suite of models and experimental laboratory data to work in tandem with observational and laboratory measurements of RSOs. These models include the Orbital Debris Engineering Model (ORDEM), the Standard Satellite Break-up Model (SSBM), and an evolutionary model of the environment from LEO to GEO (LEGEND). Ground-based data have been collected from the infrared telescope UKIRT (UK Infrared Telescope) in Hawaii, as well as the 1.3m Eugene Stansbery Meter Class Autonomous Telescope, ES-MCAT, historically called MCAT, on Ascension Island. MCAT will be tasked to collect GEO (Geosynchronous) survey data, scanning orbits to search for uncatalogued objects (e.g. fragmentation/break-up events (SSBM)), and targeted observations of catalogued objects for more intensive studies, e.g. when a break-up or anomalous event occurs. Laboratory experimental data includes DebriSat, a satellite impacted at ~6.9 km/s in an impact laboratory on Earth, and optical photometry from the Optical Measurements Center at NASA JSC. An integrated view will be discussed of how our telescopic observations and lab measurements interplay with models to understand the current (ORDEM) and future (LEGEND) environment, the evolution of satellite breakups (SSBM), and how this knowledge can help to promote an environment that is safer for operations.

Lederer, S. M.↗

PERISCOPE: PERIapsis Subsurface Cave Optical Explorer

The PERISCOPE study focuses primarily on lunar caves, due to the potential for being imaged in orbital scenarios. In the intervening years, from 2012-2015, scientists developed further rationales and interest in the scientific value of lunar caves. It does not appear that they are likely to be sinks for water-ice due to the relatively warm temperatures(~-20 degrees Celsius) in the caves leading to geologically-rapid migration of unbound water due to sublimation, and inevitable loss through any skylights. However, the skylights themselves reveal apparent complex layering, which may speak to a more complex multi-stage evolution of mare flood basalts than previously considered, and so their examination may provide even more insight into the lunar mare, which in turn provide a primary record of early solar system crustal formal and evolution processes. Further extrapolation of these insights can be found within the exoplanet community of researchers,who find the information useful for calibrating star formation and planetary evolution models. In addition, catalogues of lunar and martian skylights, "caves" or "atypical pit craters" have been developed, with numbers for both bodies now in the low hundreds thanks to additional high resolution surveys and revisiting the existing image databases.

Skylights↗

Microgravity Liquid-Gas Two-Phase Flow: Review of Pressure Drop and Heat Transfer Correlations and Guidelines for Equipment Operability

In this report we have catalogued the flow regimes observed in microgravity, summarized correlations for the pressure drop and rate of heat transfer that are commonly used, and discuss the validation of a few correlations from available experimental results. Two-phase flow through some specific components such as bends, tees, filters and pumps are discussed from a physical perspective to guide the designer on how reduced gravity might affect their performance. Phase separation in zero gravity is addressed through the behavior and basic design concepts for devices based on passive centrifugal action, capillary forces, gas extraction through a membrane installed in a channel wall and the use of a syringe with a perforated piston to remove bubbles from small liquid volumes. We address the common instabilities that develop in flow loops owing exclusively to the two-phase nature of the flow, e.g., Ledinegg instability and concentration waves. Finally we briefly review flow metering and gauging; two-phase flow through porous media, where pressure drop and flow regime map correlations in zero-g are a current research topic; and basic operation principles of heat pipes and capillary pumped loops.

liquid-gas↗

Outcomes of 7 Years of Airborne Trace Gas Measurements over California and Nevada: The Alpha Jet Atmospheric eXperiment (AJAX)

The Alpha Jet Atmospheric eXperiment (AJAX) has been flying a scientific payload since January 2011 measuring ozone, carbon dioxide, methane, formaldehyde and meteorological parameters up to 9 kilometers. AJAX is located and operated from the San Francisco Bay Area and has flown a total of 229 flights, on a regular basis (approximately 3 per month) over all seasons cataloguing a long-term record of trace gas concentrations over California and Nevada. The AJAX project focuses on science questions which benefit from routine, frequent observations with flexible scheduling. This presentation will provide an overview of AJAX activities including a discussion of airborne measurements for: Long-Range Transport (LRT) and Stratosphere-to-Troposphere Transport (STT). Regular sampling by AJAX has aided identification of LRT and evidence of STT, which during spring and summer months are visible as elevated O3 laminae within airborne profiles. Some laminae have the ability to impact surface level air quality; Satellite validation - Regular AJAX missions include flights to Railroad Valley, NV in coordination with GOSAT (Greenhouse Gases Observing Satellite) and OCO-2 (Carbon Observatory-2) observations, and more recently to provide coincident measurements under TROPOMI (TROPOspheric Monitoring Instrument); The AJAX project is uniquely flexible to incorporate specialized flights with limited planning notice, such as sampling emissions from California wildfires. Nine wildfires have been sampled, with some more than once allowing to observe emission changes as the fire progresses; Pandora validation - Future work will include development of flight strategies for validation of ground based Pandora spectrometers.

Yates, Emma L.↗

Translational Cell & Animal Research in Space 1965-2011

Translational Cell and Animal Research (TCAR). For nearly 50 years, the NASA Space Biology Program has funded, and Ames Research Center (ARC) has managed, a robust program of fundamental research including studies using a wide range of animal cells, tissues and organisms. Much of this research was conducted on spacecraft in microgravity environments including diverse platforms such as: Gemini Spacecraft, US Biosatellites, Apollo Command Modules, Skylabs, Russian Biosatellites, NASA Space Shuttles, NASA/Mir, and most recently, the International Space Station (ISS). During the Space Shuttle Era (1981–2011), the science of space biology took an enormous step forward with 45 missions that afforded researchers with new opportunities to conduct systematic and complex experiments aimed at a deeper understanding of how life adapts to the space environment. Beginning in the 1990s, the products of these experiments, comprised of research summaries and rare, unused biospecimens, were collected and catalogued within the ARC Life Sciences Data Archiving Office, a branch of NASA’s Life Sciences Data Archive (LSDA) managed from the NASA Johnson Spaceflight Center.

Ronca, April E.↗

SERVIR: Leveraging the Expertise of a Space Agency and a Development Agency to Increase Impact of Earth Observation in the Developing World

SERVIR is a joint initiative of the National Aeronautics and Space Administration (NASA) and the U.S. Agency for International Development (USAID), in collaboration with leading technical organizations around the world-- called SERVIR hubs--that serve and empower developing countries to use satellite data addressing critical challenges in food security and agriculture; water and water-related disasters; land cover, land use and ecosystems; and weather and climate. Over the past fourteen years, the program has worked with stakeholders in 50 countries across the world, partnered with 390 institutions, and generated and shared over 70 products from 27 satellites and sensors. In that process, around 7,400 specialists have been trained in the application of Earth observation data and technology. In its lifetime, SERVIR has been agile and innovative in shifting from what was essentially an incubator for testing and deploying Earth observation science and technology to making co-development the hallmark of its work, exemplified by both South-South and North-South scientific collaborations. SERVIR’s approach has embodied the concept that to solve really big problems, big, creative solutions are needed. SERVIR represents the world working together to address environmental challenges using spaced-based and geospatial technologies. Aligning with the very meaning of SERVIR, i.e. “to serve,” the program continues to be demand-driven in developing and deploying services (versus one-off products) which address development challenges using geospatial tools and Earth observation science. In 2016, as part of SERVIR’s evolution, USAID and NASA released the ‘SERVIR Service Planning Toolkit,’ a guidance document which provides a framework for how geospatial services can be used to tackle development challenges in a sustained manner. Since then, the Service Planning Toolkit’s systematic approach has begun to catch on in other Earth observation efforts. To improve access and use, SERVIR launched a Service Catalogue in February 2019, a searchable collection of demand-driven geospatial services that use Earth observations to support decision making. SERVIR implementing hub partners –include SERVIR-West Africa at the Agrometeorology, Hydrology and Meteorology (AGRHYMET) Regional Center, in Niamey, Niger; SERVIR-Eastern & Southern Africa at the Regional Centre for Mapping of Resources for Development in Nairobi, Kenya; SERVIR-Hindu Kush Himalaya at the International Centre for Integrated Mountain Development in Kathmandu, Nepal; SERVIR-Mekong at the Asian Disaster Preparedness Center in Bangkok, Thailand; and SERVIR’ -Amazonia, at the International Center for Tropical Agriculture (CIAT) in Cali, Colombia.

Searby, Nancy D.↗

NASA’s Orbital Debris JAO/ES-MCAT Optical Telescope Facility on Ascension Island

The NASA Orbital Debris Program Office has a long-standing optical program begun over three and a half decades ago in 1984, designed to observe the Earth-orbiting environment with optical telescopes. Photometrically calibrated optical data provides a statistical sample for input to NASA models of the debris population for understanding the current and future debris environment around the Earth. Tracked objects and orbits allow for analysis of break-up events. Both known (correlated target in the SSN catalogue, or CT) and unknown (uncorrelated target, or UCT) objects are of interest to better understand how to protect current spacecraft and design more robust future operational satellites, and advise on how policies and practices can lead to protecting the environment itself for future generations. In 2015, a joint NASA JSC – Air Force Research Labs (AFRL) project culminated in the installation of the 1.3-meter Eugene Stansbery Meter Class Autonomous Telescope, ES-MCAT (a.k.a. MCAT) on Ascension Island. This DFM Engineering designed telescope provides nearly five-times greater light-collecting power than its predecessor, the 0.6-m MODEST telescope, and faster tracking capabilities by both the telescope and the 7-m ObservaDome. This allows for all orbital regimes to be easily within reach, ranging from low Earth to geosynchronous orbits. Extensive testing and commissioning activities of this custom system led to successfully reaching Initial Operational Capability in 2018, and the facility is currently on track to reach Full Operational Capability. The John Africano Observatory (JAO) comprises the primary 1.3-m ES-MCAT facility, the adjacent tower platform with a 0.4-m telescope, a sophisticated suite of weather instruments, and custom software by Euclid Research for autonomously running the entire system, including monitoring the weather and hardware, tasking all components, and collecting, processing, and analyzing the data. The mission of JAO and MCAT will be discussed, including survey and tracking tasking, a full discussion of data calibration, and both optics and weather-dependent performance.

Lederer, S. M.↗

Surface Emissivity Impacts on GOES-R Series Multi-Spectral Imagery Applications

Value-added imagery products from the GOES-R series Advanced Baseline Imager are used to identify features of interest for operational forecasters, including: blowing dust, smoke, volcanic ash, cloud cover, atmospheric moisture, biomass fires and snow cover. These features each have a specific spectral signal that algorithms are designed to detect, but those signals are not always unique to just a single feature. Sometimes, the surface can mimic the spectral signal associated with an atmospheric feature of interest, creating a false alarm in a value-added product which negatively impacts interpretation of that product. This case study focuses on one such situation where areas of desert in the southwestern United States mimic the positive value associated with low clouds in the Brightness Temperature Difference (BTD) between the 10.35 μm and 3.9 μm channels, producing a false alarm. In order to characterize these “false alarm” areas, this study uses the cloud-cleared background product from the Cooperative Institute for Research in the Atmosphere (CIRA) to create a dataset of the cloud-free surface. Previous results have shown that cloud-cleared backgrounds of the 10.35 μm-3.9 μm BTD have successfully identified areas of positive BTDs in the cloud-free environment, proving that it is a property of the surface emissivity and a true “false alarm”. This study builds on that previous research to further characterize the seasonality of the “false-alarm” regions and to catalogue how they impact interpretation of multi-spectral imagery products from the GOES-R series ABI, especially the Nighttime Microphysics RGB created by NASA Short-term Prediction Research and Transition (SPoRT) Center.

Burke, Angela↗

Re-examination of the Population, Stratigraphy, and Sequence of Mercurian Basins: Implications for Mercury’s Early Impact History and Comparison with the Moon

Mercury has one of the best preserved impact records in the inner Solar System due to the absence of an atmosphere, but it has much higher rates of surface modification than on the Moon. The earliest geological mapping of the planet revealed a variety of important differences from the Moon, regarding the impact basin (D ≥ 300 km) and cratering record, as well as the extensive volcanic plains of Mercury [1-3]. It has been shown [3] that the bombardment history of the terrestrial planets is lunar-like and linked in terms of impactor population(s) and impact rates. Recent studies suggest that Mercury and the Moon had the same early impactor populations based on the similarity of their crater size-frequency distributions (CSFD), however the impact rates on Mercury are higher than on the Moon. Catalogued and characterized the basin population on Mercury using early optical data obtained by the MESSENGER spacecraft and found 46 certain and probable impact basins, as well as 41 tentative.

Orgel, C.↗

XMM-Newton observations of eleven intermediate polars and possible candidates

We aim to identify new intermediate polars (IPs) in XMM-Newton observations from a list of promising candidates. By selecting targets not previously known to be X-ray bright we aim to uncover evidence for an X-ray underluminous IP subpopulation. We performed period searches on the XMM-Newton X-ray and optical data of our targets to seek both the spin and orbital periods, which differ in IPs. We also investigated the X-ray spectra to find the hot plasma emission shown by these objects. With archival Swift data we coarsely investigated the long-term X-ray variability, and with archival optical data from a variety of catalogues, we compared the optical to X-ray luminosity to identify X-ray faint objects. This paper presents the first XMM-Newton observation of the prototype IP, DQ Her. We find firm evidence for HZ Pup, V349 Aqr, and IGR J18151-1052 being IPs, with likely white dwarf spin periods of 1552, 390, and 390 s, respectively. The former two have luminosities typical of IPs, and the latter is strongly absorbed and with unknown distance. GI Mon and V1084 Her are apparently non-magnetic CVs with interesting short-term variability unrelated to WD spin. V533 Her is probably a magnetic CV and remains a good IP candidate, while V1039 Cen is possibly a polar. The remaining candidates were too faint to allow for any firm conclusions.

H. Worpel↗

The Next Generation X-Ray Galaxy Survey with eROSITA

eROSITA, launched on 13 July 2019, will be completing the first all-sky survey in the soft and medium X-ray band in nearly three decades. This 4-year survey, finishing in late 2023, will present a rich legacy for the entire astrophysics community and complement upcoming multi-wavelength surveys (with, e.g. the Large Synoptic Survey Telescope and the Dark Energy Survey). Besides the major scientific aim to study active galactic nuclei (AGN) and galaxy clusters, eROSITA will contribute significantly to X-ray studies of normal (i.e. not AGN) galaxies. Starting from multi-wavelength catalogues, we measure star formation rates and stellar masses for 60 212 galaxies constrained to distances of 50–200 Mpc. We chose this distance range to focus on the relatively unexplored volume outside the local Universe, where galaxies will be largely spatially unresolved and probe a range of X-ray luminosities that overlap with the low luminosity and/or highly obscured AGN population. We use the most recent X-ray scaling relations as well as the on-orbit eROSITA instrument performance to predict the X-ray emission from XRBs and diffuse hot gas and to perform both an analytic prediction and an end-to-end simulation using the mission simulation software, SIXTE. We consider potential contributions from hidden AGN and comment on the impact of normal galaxies on the measurement of the faint end of the AGN luminosity function. We predict that the eROSITA 4-year survey, will detect ≳15 000 galaxies (3σ significance) at 50–200 Mpc, which is ~ 100× more normal galaxies than detected in any X-ray survey to date.

Surveys↗

On the Flux of Millimetric Space Debris

Space debris is a constantly increasing hazard for operations in space. For objects larger than about 10 cm, the USSPACECOM maintains a catalogue of orbital elements. Their data, obtained with longer wavelength radars, relates to larger scale objects. This report concerns debris measurements made at JPL's Goldstone Observatory using the 3.5 cm Haystack radar which can detect a 6 mm sphere at 1000 km.

space↗