Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Contribution of cryogenic thermal cycling to the atomic dynamics in a La-based bulk metallic glass with different initial states

Structural rejuvenation in metallic glasses (MGs) induced by cryogenic thermal cycling has been intensively studied. However, the effect of thermal cycling on the atomic dynamics in MGs is still missing. In this work, we present a systematic study on the atomic dynamics in a La-based MG affected by sub-Tg annealing and thermal cycling. We find that the thermal cycling has little effect on the atomic dynamics in both as-cast and annealed MGs although it could significantly increase the free volume and change mechanical properties of the as-cast MG sample. In contrast, both the structure and mechanical properties of the well-relaxed sample are almost unchanged by thermal cycling. Further, the increased open volume, mainly in the form of atomic vacancies, does not greatly promote the atomic dynamics in the as-cast MG sample, indicating that the free volume induced by thermal cycling is not the key factor in stimulating the β-relaxation and the boson peak in the studied MG.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tuning spin–orbit coupling in (6,5) single-walled carbon nanotube doped with sp 3 defects

Single-walled carbon nanotubes (SWCNTs) containing sp 3 defects are a promising class of optoelectronic materials with bright photoluminescence and demonstrated single-photon emission. Using density functional theory simulations, complemented by measurements, we investigate the electronic structure of a series of quantum defects attached to (6,5) SWCNT with the goal of tuning the spin–orbit coupling by introduction of a heavy atom in the defect structure. We characterize the ground state electronic and spin properties of four synthesized and three potential defects on the tube and find that all of the synthesized defects considered introduce a localized midgap defect-centered state containing a single electron, ≈0.2–0.3 eV above the valence band. The spin density is located at the sp 3 defect site with negligible spin–orbit coupling even with the presence of a Pd atom. Three additional functional groups were tested via computation to increase spin localization near the metal, thereby increasing spin–orbit coupling. We predict that only the chlorodiphosphanepalladium(II)– [Cl(PH 3 ) 2 Pd(II)–] defect results in increased spin–orbit splitting of the defect state and the conduction band associated with the pristine-like SWCNT, a measure of the spin–orbit coupling of excited state transitions. This study suggests that for unpassivated sp 3 defects in (6,5) SWCNT, forming a direct bond between a heavy atom and the sp 3 carbon allows for tuning of spin–orbit coupling.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Unraveling Site Selective Magnetic Properties of Cobalt Sites in Critical Elements Lean RE(TM)5 Magnet Materials

We report here our discovery of crystallographic and interstitial sites and onsite electron correlation propelled intrinsic and derived permanent magnetic properties of critical elements lean RE(TM) 5 (RE = La, Ce and TM = Fe, Co) magnet materials. A full potential linearized augmented plane wave (FP-LAPW) method within the local density approximation (LDA) is used to investigate and analyze the electronic structure and magnetism of these RE(TM) 5 type structures. To better correlate the experimental results, the effective Coulomb (U) and exchange (J) interactions (Hubbard parameters) are crucial at the transition metal sites. Results show that the main propeller of magnetic anisotropy in these compounds is the cobalt atoms at the 2c sites not the 3g sites. This site-specific property and site preference energetics are used to replace 3g sites with non-critical elements such as iron that exhibits a larger magnetic moment. Based on this strategic replacement, we predict two new compounds that have a larger hardness parameter with a relatively large energy product due to the atomic dilution caused by interstitial addition of nitrogen in the compounds: CeCo 2 Fe 3 N 2 and LaCo 2 Fe 3 N 2 .

Rare-earths↗
DOE OSTI2022

Multi-scale characterization of supersolidus liquid phase sintered H13 tool steel manufactured via binder jet additive manufacturing

Additive manufacturing (AM) of H13 tool steel by binder jet 3D printing (BJ3DP) followed by pressureless supersolidus liquid phase sintering (SLPS) provides a low-cost alternative manufacturing method for components with intricate geometric features. However, the microstructure-mechanical property relationships for BJ3DP-SLPS produced H13 tool steel are not well understood, which makes it challenging to develop printing and post-processing methods that maximize part performance. In this work, we leverage atom probe tomography and transmission electron microscopy along with thermodynamic calculations to rationalize the microstructure-mechanical property relationships in as-sintered BJ3DP H13 tool steel. Here, we report for the first time, the presence of a continuous eutectic film-like carbide in H13 along with the more commonly observed cuboidal MX carbides in the prior liquid channels of the microstructure. Further, atom probe tomography revealed the interconnected nature of the MX carbides that appear to be discrete in two-dimensional micrographs. These continuous eutectic carbides and interconnected MX carbides result in brittle failure of the material. Characterization of these microstructural features will be critical in developing appropriate post-processing heat treatments for the improved mechanical performance of BJ3DP H13.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum Monte Carlo Benchmarking of Molecular Adsorption on Graphene-Supported Single Pt Atom

The precise understanding of adsorption energetics and molecular geometry at catalytic sites is fundamental for advancing catalysis, particularly under the constraints of resource efficiency and environmental sustainability. Here, this study benchmarks the performance of density functional theory (DFT) calculations against diffusion Monte Carlo (DMC) calculations for adsorption properties of small gas molecules relevant to CO oxidation—namely O 2 , CO, CO 2 , and atomic oxygen—on a single Pt atom supported by pristine graphene. Our findings reveal that DMC calculations provide a significantly different landscape of adsorption energetics compared to DFT results. Notably, DFT predicts different lowest-energy configurations and spin states, particularly for O 2 , which suggests potential discrepancies in predicting the catalytic behavior. Furthermore, this study identifies the critical issue of CO poisoning, highlighted by the large disparity between the DMC adsorption energies of O 2 (−1.23(2) eV) and CO (−3.37(1) eV), which can inhibit the catalytic process. These results emphasize the necessity for more sophisticated computational approaches in catalysis research, aiming to refine the prediction accuracy of reaction mechanisms and to enhance the design of more effective catalysts.

Ahn, Jeonghwan [University of Illinois at Urbana-C↗
DOE OSTI2024

Discovery of Dielectric Response and Forces in Sub-Nanoscale Objects (Final Technical Report)

This is the final technical report for DOE Award DE-SC0005132 entitled “Discovery of Dielectric Response and Forces in Sub-Nanoscale Objects.” This award originated on August 15, 2010 with Principle Investigator Prof. Phil Batson of Rutgers, The State University of New Jersey. Prof. Batson transitioned to Professor Emeritus status on January 31, 2023. At that time PI status was transferred to Prof. Robert Bartynski of the Department of Physics and Astronomy at Rutgers, The State University of New Jersey, and Director of the Rutgers Laboratory for Surface Modification. The central theme of the research performed under this award is develop and refine a NION aberration-corrected Scanning Transmission Electron Microscope to attain atomic spatial resolution and sub 10meV energy resolution in electron energy loss spectroscopy (EELS) performed on the transmitted electron beam. These capabilities allow examination of the excitation properties (primarily plasmonic and vibrational [ie., phonons] of nanoscale objects when excited with a highly-localized (~ Angstrom-scale) high energy (~ 60 keV) electron beam. Direct excitations (i.e., the response to electrons impinging directly on the sample) as well as excitations in response to the dynamic electric (and magnetic!) fields of an aloof electron beam (i.e., a beam that is close to but displaced from the target) have been studied. Our experimental work has benefited greatly from close collaborations with theoretical colleagues, but at Rutgers and from around the world, providing a much more complete understanding of the observed phenomena and suggesting avenues for further study and practical applications. This report summarizes the technical and scientific achievements accomplished during the entire award period. More extensive details are available in the Progress Reports that have already been filed with the Department of Energy. The report is divided into six sections. The first four sections focus on exploring, developing and understanding several unique capabilities and phenomena discovered and accessible owing to the high spatial- and energy-resolution we have been able to achieve. The latter two sections focus on applications of the STEM’s novel capabilities to study atomic- and nanometer-scale properties of solids, as well as broader applications to advanced and bio-materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Light-wave-controlled Haldane model in monolayer hexagonal boron nitride

In recent years, the stacking and twisting of atom-thin structures with matching crystal symmetry has provided a unique way to create new superlattice structures in which new properties emerge. In parallel, control over the temporal characteristics of strong light fields has allowed researchers to manipulate coherent electron transport in such atom-thin structures on sublaser-cycle timescales. Here we demonstrate a tailored light-wave-driven analogue to twisted layer stacking. Tailoring the spatial symmetry of the light waveform to that of the lattice of a hexagonal boron nitride monolayer and then twisting this waveform result in optical control of time-reversal symmetry breaking and the realization of the topological Haldane model in a laser-dressed two-dimensional insulating crystal. Further, the parameters of the effective Haldane-type Hamiltonian can be controlled by rotating the light waveform, thus enabling ultrafast switching between band structure configurations and allowing unprecedented control over the magnitude, location and curvature of the bandgap. This results in an asymmetric population between complementary quantum valleys that leads to a measurable valley Hall current, which can be detected by optical harmonic polarimetry. The universality and robustness of our scheme paves the way to valley-selective bandgap engineering on the fly and unlocks the possibility of creating few-femtosecond switches with quantum degrees of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Core-level binding energy shifts between interior, terrace and edge atoms in MnO(001) thin films

Understanding the physical origin of core-level photoemission line shapes can offer valuable information about the chemical and physical properties of surfaces. For instance, in a large number of transition metals oxides, changes in the line shape allow the accurate determination of their oxidation states and cation site symmetry. Yet, despite this importance, experimental investigations on core-level shifts have been much neglected in recent years. In order to provide further evidence of the physical relevance, we have, in this contribution, introduced a new aspect of interior-, terrace- and edge- atom core-level binding energy shifts to describe monolayers of MnO(001) films grown on an Au(111) substrate. By this means we were able to distinguish the line shape contributions related to different types of atomic sites. Here we show that their relative intensities and energy shifts are able to provide information about the relative amount of under coordinated atoms on the surface and, thus give insights into their catalytic properties. Our findings reveal the importance of a detailed surface science characterization to provide the correct interpretation of distinct photoemission line shapes when considering thin film samples as well as nanostructures in general.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Parameterizing empirical interatomic potentials for predicting thermophysical properties via an irreducible derivative approach: the case of ThO 2 and UO 2

The accuracy of classical physical property predictions using molecular dynamics simulations is determined by the quality of the interatomic potentials. Here we introduce a training approach for empirical interatomic potentials (EIPs) which is well suited for capturing phonons and phonon-related properties. Our approach is based on direct comparisons of the second- and third-order irreducible derivatives (IDs) between an EIP and the Born–Oppenheimer potential within density functional theory (DFT) calculations. IDs fully exploit space group symmetry and allow for training without redundant information. We demonstrate the fidelity of our approach in the context of ThO 2 and UO 2 , where we optimize parameters of an embedded-atom method potential in addition to core–shell interactions. Our EIPs provide thermophysical properties in good agreement with DFT and outperform widely utilized EIPs for phonon dispersion and thermal conductivity predictions. Reasonable estimates of thermal expansion and formation energies of Frenkel pairs are also obtained.

empirical interatomic potential↗
DOE OSTI2023

Structural mapping and tuning of mixed halide ions in amorphous sulfides for fast Li-ion conduction and high deformability

Amorphous sulfides are among the most promising candidates for solid electrolytes (SEs) owing to their excellent deformability and acceptable Li-ion conductivity (σion) at room temperature. However, the complex atomic structure of these amorphous materials without long-range ordering results in a lack of structural understanding and difficulties in tuning material properties. Here, in this study, we performed structural mapping of glassy sulfide SEs composed of various anion clusters using a combinatorial atomic level analysis of synchrotron X-ray-based pair distribution function (PDF) and reverse Monte-Carlo (RMC) methods, demonstrating the potential to tune σ ion in glass SEs. First, we prepared a new glassy sulfide with a mixed anion framework of two halogens (Br and I) as atomic anions, with PS 4 3- molecular anions in a Li 2 S–P 2 S 5 -based glass SE. At a specific Br content, [(Li 2 S) 0.658 (LiI 0.9 LiBr 0.1 ) 0.342 ] 0.825 [P 2 S 5 ] 0.175 recorded a σ ion of 2.27 mS cm -1 , the highest value for any glass sulfides reported to date; however, its elastic modulus was still suppressed to 14.48 GPa. PDF and RMC calculations successfully provided structural mapping of anion clusters, including two halogens. Molecular dynamics simulations of each composition confirmed that flexible coordination caused by the rattling of small polarizable Br ions in the mixed halogens of glassy SEs contributed to the superior σ ion . Our results may provide new insights into the design of superior glassy SEs that play key roles in all-solid-state batteries requiring fast Li-ion conduction and high deformability.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Anisotropy, frustration, and saddle point in the twisted kagome compound ErPdPb

The kagome lattice, with its inherent geometric frustration, provides a rich platform for exploring intriguing magnetic phenomena and topological electronic structures. In reduced-symmetry structures, such as twisted kagome systems involving rare earth elements, additional anisotropy can arise, enabling intriguing properties including spin-ice states, magnetocaloric effects, noncollinear magnetic ordering, and the anomalous Hall effect. Here, we report the synthesis of single crystals of ErPdPb, which features a twisted kagome lattice net of Er atoms within the hexagonal ZrNiAl-type structure, and we investigate its magnetic, electronic, and thermal properties. The material exhibits a highly anisotropic, correlated magnetic state below 2.7 K, as evidenced by magnetic, transport, and heat capacity measurements. Density functional theory (DFT) calculations indicate strong easy-axis anisotropy, consistent with experiment and crystal-field expectations, as well as quasi-one-dimensional bands and a spin-split saddle point at the zone center. Here, the coexistence of competing magnetic interactions along different crystallographic directions suggests an inherent degree of frustration. ErPdPb thus provides a promising platform for exploring the interplay of frustration, anisotropy, and electronic structure in a twisted kagome lattice.

Antiferromagnets↗
DOE OSTI2024

Infrared Optical Anisotropy in Quasi‐1D Hexagonal Chalcogenide BaTiSe 3

Polarimetric infrared (IR) detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy is discovered in quasi-1D narrow-bandgap hexagonal perovskite sulfides, A 1+x TiS 3 , specifically BaTiS 3 and Sr 9/8 TiS 3 . In these materials, the critical role of atomic-scale structure modulations in the unconventional electrical, optical, and thermal properties raises the broader question of the nature of other materials that belong to this family. To address this issue, for the first time, high-quality single crystals of a largely unexplored member of the A 1+x TiX 3 (X = S, Se) family, BaTiSe 3 are synthesized. Single-crystal X-ray diffraction determined the room-temperature structure with the P31c space group, which is a superstructure of the earlier reported P6 3 /mmc structure. The crystal structure of BaTiSe 3 features antiparallel c-axis displacements similar to but of lower symmetry than BaTiS 3 , verified by the polarization dependent Raman spectroscopy. Fourier transform infrared (FTIR) spectroscopy is used to characterize the optical anisotropy of BaTiSe 3 , whose refractive index along the ordinary (E ⊥ c) and extraordinary (E ‖ c) optical axes is quantitatively determined by combining ellipsometry studies with FTIR. With a giant birefringence Δn ∼ 0.9, BaTiSe 3 emerges as a new candidate for miniaturized birefringent optics for mid-wave infrared to long-wave infrared imaging.

optical anisotropy↗
DOE OSTI2026

Rotation of Crystal Seed During Early Stages of Growth Reveals the Anisotropy of Glass Matrix

Glass-ceramics are a highly valuable class of materials that are needed for realizing many high-tech as well as consumer products. They are made by controlling crystallization of glass. Theoretical atomistic insights obtained using molecular dynamics simulations in this work reveal that crystal seeds can spontaneously rotate within glass at high temperatures due to anisotropic forces at the glass-crystal interface. This rotation challenges the long‐held view of glass as isotropic solid, and highlights how atomic‐scale inhomogeneities influence crystal growth and microstructure, hence the physical properties glass‐ceramics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Insights into Heterogeneous Catalysts under Reaction Conditions by In Situ/Operando Electron Microscopy

The advancement of clean energy and environment depends strongly on the development of efficient catalysts in a wide range of heterogeneous catalytic reactions, which has benefited from transmission electron microscopic techniques in determining the atomic-scale morphologies and structures. However, it is the morphology and structure under the catalytic reaction conditions that determine the performance of the catalyst, which has captured a surge of interest in developing and applying in situ/operando transmission electron microscopic techniques in heterogeneous catalysis. The major theme of this review is to highlight some of the most recent insights into heterogeneous catalysts under the relevant reaction conditions using in situ/operando transmission electron microscopic techniques. Rather than a comprehensive overview of the basic principles of in situ/operando techniques, this review focuses on the insights into the atomic-scale/nanoscale details of various catalysts ranging from single-component to multicomponent catalysts under heterogeneous catalytic, electrocatalytic, and photocatalytic reaction conditions involving both gas–solid and liquid–solid interfaces. Here, this focus is coupled with discussions of the correlation of the atomic, molecular, and nanoscale morphology, composition, and structure with the catalytic properties under the reaction conditions, shining light on the challenges and opportunities in design of nanostructured catalysts for clean and sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Silica–Derived Nanostructured Electrode Materials for ORR, OER, HER, CO 2 RR Electrocatalysis, and Energy Storage Applications: A Review**

Silica-derived nanostructured catalysts (SDNCs) are a class of materials synthesized using nanocasting and templating techniques, which involve the sacrificial removal of a silica template to generate highly porous nanostructured materials. The surface of these nanostructures is functionalized with a variety of electrocatalytically active metal and non-metal atoms. SDNCs have attracted considerable attention due to their unique physicochemical properties, tunable electronic configuration, and microstructure. These properties make them highly efficient catalysts and promising electrode materials for next generation electrocatalysis, energy conversion, and energy storage technologies. The continued development of SDNCs is likely to lead to new and improved electrocatalysts and electrode materials. This review article provides a comprehensive overview of the recent advances in the development of SDNCs for electrocatalysis and energy storage applications. It analyzes 337,061 research articles published in the Web of Science (WoS) database up to December 2022 using the keywords “silica”, “electrocatalysts”, “ORR”, “OER”, “HER”, “HOR”, “CO 2 RR”, “batteries”, and “supercapacitors”. The review discusses the application of SDNCs for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO 2 RR), supercapacitors, lithium-ion batteries, and thermal energy storage applications. It concludes by discussing the advantages and limitations of SDNCs for energy applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Precipitation-site competition in duplex stainless steels: Cu clusters vs spinodal decomposition interfaces as nucleation sites during thermal aging

Competing microstructural evolution mechanisms can exist simultaneously when duplex stainless steels are operating for several decades in a high temperature service environment. Such competition between different microstructural evolution pathways can be difficult to ascertain using simple model alloy systems necessitating detailed structural and compositional analysis of phase transformation mechanisms in complex alloys Thus, in this study duplex stainless steels with complex but well understood chemistries were used to investigate the relative importance of different heterogeneous nucleation sites – specifically spinodal decomposition and Cu clustering – on precipitation of Ni-Si-Mn particles during long term thermal aging. Precipitation of Ni-Si-Mn particles in duplex stainless steels and ferritic steels during thermal aging and irradiation is known to have profound effect on mechanical properties. Using duplex stainless steels with custom modified compositions along with atom probe tomography characterization and first-passage kinetic Monte Carlo (FPKMC) simulations it is revealed that while the interface between Cr and Fe formed during spinodal decomposition can be a pathway for diffusion of Ni, Si, Mn, and Cu, it is not a site that encourages precipitation of Ni-Si-Mn rich particles. Instead, the presence of a higher concentration of Cu in these steels leads to formation of small Cu clusters with high energy interfaces that act as nucleation sites for Ni-Si-Mn particles because of its strong interaction particularly with Ni increasing the chemical driving force for precipitation. These results will help inform predictive models for the use of duplex stainless steels and other precipitation-hardened alloys for extended operation at high temperatures.

Duplex stainless steel, Thermal aging, Precipitati↗