Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIND EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

In-Tunnel Simulations of the NASA Juncture Flow Model

The effect of wind tunnel walls on the development of flow separation in the wing-fuselage juncture area is assessed using FUN3D’s overset and wind tunnel controller capabilities. The simulation data obtained from the in-tunnel runs are compared with the free-air simulations. The simulation results are also evaluated using measurements from the recently completed Phase 2 of the Juncture Flow Experiment. In general, the simulation data compared well with the measurements, however there were no significant differences in the prediction of the separation location, size, and shape, between the free-air and the in-tunnel runs. The results of this study suggest that the effects of tunnel walls on the flow separation in the juncture region are relatively small.

Juncture Flow↗

In-Tunnel Simulations of the NASA Juncture Flow Model

The effect of wind tunnel walls on the development of flow separation in the wing-fuselage juncture area is assessed using FUN3D’s overset and wind tunnel controller capabilities. The simulation data obtained from the in-tunnel runs are compared with the free-air simulations. The simulation results are also evaluated using measurements from the recently completed Phase 2 of the Juncture Flow Experiment. In general, the simulation data compared well with the measurements, however there were no significant differences in the prediction of the separation location, size, and shape, between the free-air and the in-tunnel runs. The results of this study suggest that the effects of tunnel walls on the flow separation in the juncture region are relatively small.

Juncture Flow↗

On the structure of artificially generated water wave trains

The structure of an artificially generated sinusoidal water wave train of fixed frequency under the influence of wind is analyzed. Artificially generated waves of 1 Hz are studied at seven wind speeds in the range of 140-400 cm/s. It is observed that the water wave train deformed by wind consists of two components at both the fundamental mode and the harmonics. The amplitude and phase of the wave components are derived, and the dispersion relation and component phase speeds are examined. The data reveal that the amplitude of the forced and free-traveling second harmonics correlate with previous theories, and that the deviation of the measured phase speed from the linear theory is caused by the nonlinearity of the primary wave, the interaction between short gravity waves and the primary wave, and the advection effects of wind drift.

Papadimitrakis, Yiannis A.↗

Unsteady two dimensional airloads acting on oscillating thin airfoils in subsonic ventilated wind tunnels

The numerical calculation of unsteady two dimensional airloads which act upon thin airfoils in subsonic ventilated wind tunnels was studied. Neglecting certain quadrature errors, Bland's collocation method is rigorously proved to converge to the mathematically exact solution of Bland's integral equation, and a three way equivalence was established between collocation, Galerkin's method and least squares whenever the collocation points are chosen to be the nodes of the quadrature rule used for Galerkin's method. A computer program displayed convergence with respect to the number of pressure basis functions employed, and agreement with known special cases was demonstrated. Results are obtained for the combined effects of wind tunnel wall ventilation and wind tunnel depth to airfoil chord ratio, and for acoustic resonance between the airfoil and wind tunnel walls. A boundary condition is proposed for permeable walls through which mass flow rate is proportional to pressure jump.

Fromme, J.↗

The effect of terrain-influenced winds on fire spread in QUIC-Fire

Here in this manuscript, we describe the implementation of the terrain-following version of QUIC-URB into QUIC-Fire and a demonstration of the impacts of terrain-influenced winds on QUIC-Fire-simulated fire spread. No changes to the underlying QUIC-Fire fire spread algorithm were made other than what was required to correctly account for the inclusion of terrain. This paper summarizes simulations used to understand how the QUIC-URB terrain-influenced winds affect upslope fire behavior without additional changes to the QUIC-Fire fire spread algorithm. Previously published FIRETEC results are compared to simulation results from the modified QUIC-Fire (incorporating terrain-influenced winds) that use the same topographies and fuels. QUIC-Fire results showed overall similar behaviors in terms of how the topographies affected fire shapes and trends in spread rates. Due to the terrain-following version of QUIC-URB being unable to generate flow separations at the crest of hills, fire spread rates in these regions across all non-flat topographies were over-predicted when compared to FIRETEC. Lateral fire growth showed similar trends with FIRETEC between topographies but did not capture the increase in spread due to a diagonal interface between grassland and forested fuel regions in the test domain. These simulations suggest possible refinements that are necessary to improve QUIC-Fire and thus guide ongoing efforts related to: how flame tilt angle is accounted for, the incorporation of non-local drag effects, and the inclusion of the wake-eddy parameterizations that are used in QUIC-URB.

54 ENVIRONMENTAL SCIENCES↗

The 1994 TIMS airborne calibration experiment: Castaic Lake, California

This summary describes the 9 March 1994 Thermal Infrared Multispectral Scanner (TIMS) airborne calibration experiment conducted at Castaic Lake, California. This experiment was a collaborative effort between the TIMS and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) science teams at the Jet Propulsion Laboratory (JPL). TIMS was flown on the NASA/Ames Research Center C130 with the new retractable air fence installed in the TIMS instrument bay. The purpose of this experiment was to determine if the fence would reduce the air turbulence in the TIMS instrument bay, thereby reducing the errors in calibration caused by wind-blast cooling of the blackbody reference sources internal to TIMS. Previous experiments have indicated that the wind blast effect could cause TIMS to over-estimate surface temperatures by more than 10 C. We have examined the TIMS data from twelve lines flown over Castaic Lake. Four of the lines were flown at an altitude of approximately 2.5 km (MSL), four at an altitude of approximately 6.7 km, and four at approximately 8.3 km. At each altitude there were flights with northern and southern headings, with the aircraft level and at a positive pitch (nose-up attitude). The suite of twelve flights was designed to subject the TIMS/air fence system to different wind conditions and air temperatures. The TIMS flights were supported by a ground-truth team, who measured lake surface temperatures from a boat, and an atmosphere characterization team, who launched an airsonde and measured solar irradiance with a Reagan Sun Photometer. The Reagan measurements were used to construct a time-series of estimates of the total abundance of water vapor in the atmospheric column. These estimates were used to constrain modifications of the airsonde water vapor profile measurements made when processing the TIMS data with a customized version of the MODTRAN radiative transfer code.

Realmuto, Vincent J.↗

In situ magnetic field measurements during AMPTE solar wind Li(+) releases

The effects of lithium ion releases on solar wind flow are investigated. The background field conditions during the releases on September 11 and 20, 1984 are discussed. The magnetic field data recorded by the Ion Release Module and United Kingdom Satellite are described. It is observed that the first release occurred on the field lines connecting to the earth's bow shock causing difficulty in separating the effects of natural large scale perturbations from the ion effects. In the second release, which occurred in a stable, ambient environment, the characteristics of a Venus-like perturbation of the magnetic field are detected. It is concluded that in both releases a field cavity is formed, the field transverse to the solar wind flow is amplified, and the transverse component is compressed.

Luehr, H.↗

OC6 Phase II: Integration and verification of a new soil–structure interaction model for offshore wind design

Abstract This paper provides a summary of the work done within the OC6 Phase II project, which was focused on the implementation and verification of an advanced soil–structure interaction model for offshore wind system design and analysis. The soil–structure interaction model comes from the REDWIN project and uses an elastoplastic, macroelement model with kinematic hardening, which captures the stiffness and damping characteristics of offshore wind foundations more accurately than more traditional and simplified soil–structure interaction modeling approaches. Participants in the OC6 project integrated this macroelement capability to coupled aero‐hydro‐servo‐elastic offshore wind turbine modeling tools and verified the implementation by comparing simulation results across the modeling tools for an example monopile design. The simulation results were also compared to more traditional soil–structure interaction modeling approaches like apparent fixity, coupled springs, and distributed springs models. The macroelement approach resulted in smaller overall loading in the system due to both shifts in the system frequencies and increased energy dissipation. No validation work was performed, but the macroelement approach has shown increased accuracy within the REDWIN project, resulting in decreased uncertainty in the design. For the monopile design investigated here, that implies a less conservative and thus more cost‐effective offshore wind design.

17 WIND ENERGY↗

Estimating Wall-Induced Velocities in Wind Tunnels

Estimates of wall effects in two-dimensional wind tunnel obtained using upwash measurements on two contours near test model. Method derived from combination of prior techniques that correct for wall effects. Improved method limited to flows described by linear equations. Method accurately predicted wall-induced velocities along centerline of theoretical wind tunnel and confirmed that wall adjustments substantially reduced wall interference.

Schairer, E. T.↗

A Real-Time Online Data Product that Automatically Detects Easterly Gap-Flow Events and Precipitation Type in the Columbia River Gorge

A real-time, hourly updated, online graphical data product that displays the depth and strength of easterly gap flow in the Columbia River Gorge using a 915-MHz Doppler wind profiler is presented. During precipitation events, this data product also displays observed precipitation accumulation and diagnosed precipitation type using measurements provided by a collocated heated tipping-bucket rain gauge, an optical disdrometer, and temperature and relative humidity sensors. Automated algorithms that determine the existence and depth of the gap flow, as well as precipitation type, are described. The Columbia River Gorge is the only major gap in the Cascade Mountains of Oregon and Washington. Consequently, both easterly and westerly directed gap-flow events are common in this region. Especially during late autumn and winter, easterly gap flow can cause hazardous and damaging weather (e.g., snow, freezing rain, and strong winds) in the Portland, Oregon–Vancouver, Washington metropolitan area. The product described here was developed to help forecasters at the Portland National Weather Service Forecast Office monitor cool-season easterly gap-flow events in order to provide situational awareness and guide warnings to the public about potential weather-related hazards.

42 ENGINEERING↗

Discrimination and quantification of Fe and Ni abundances in Genesis solar wind implanted collectors using X-ray standing wave fluorescence yield depth profiling with internal referencing

In this paper, X-ray standing wave fluorescence yield depth profiling was used to determine the solar wind implanted Fe and Ni fluences in a silicon-on-sapphire (SoS) Genesis collector (60326). An internal reference standardization method was developed based on fluorescence from Si and Al in the collector materials. Measured Fe fluence agreed well with that measured previously by us on a sapphire collector (50722) as well as SIMS results by Jurewicz et al. Measured Ni fluence was higher than expected by a factor of two; neither instrumental errors nor solar wind fractionation effects are considered significant perturbations to this value. Impurity Ni within the epitaxial Si layer, if present, could explain the high Ni fluences and therefore needs further investigation. As they stand, these results are consistent with minor temporally-variable Fe and Ni fractionation on the timescale of a year.

36 MATERIALS SCIENCE↗

Blockage Corrections for Three-Dimensional-Flow Closed-Throat Wind Tunnels, with Consideration of the Effect of Compressibility

Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional, unswept wing in a circular or rectangular wind tunnel. The theory takes account of the effects of the wake and of the compressibility of the fluid, and is based on the assumption that the dimensions of the model are small in comparison with those of the tunnel throat. Formulas are given for correcting a number of the quantities, such as dynamic pressure and Mach number, measured in wind tunnel tests. The report presents a summary and unification of the existing literature on the subject

Herriot, J. G.↗

Blockage corrections for three-dimensional-flow closed-throat wind tunnels, with consideration of the effect of compressibility

Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional unswept wing in a circular or rectangular wind tunnel. The theory takes account of the effects of the wake and of the compressibility of the fluid, and is based on the assumption that the dimensions of the model are small in comparison with those of the tunnel throat. Formulas are given for correcting a number of the quantities, such as dynamic pressure and Mach number, measured in wind-tunnel tests. The report presents a summary and unification of the existing literature on the subject.

Herriot, John G↗

Wall interference in a two-dimensional-flow wind tunnel, with consideration of the effect of compressibility

Theoretical tunnel-wall corrections are derived for an airfoil of finite thickness and camber in a two-dimensional-flow wind tunnel. The theory takes account of the effects of the wake of the airfoil and of the compressibility of the fluid, and is based upon the assumption that the chord of the airfoil is small in comparison with the height of the tunnel. Consideration is given to the phenomenon of choking at high speeds and its relation to the tunnel-wall corrections. The theoretical results are compared with the small amount of low-speed experimental data available and the agreement is seen to be satisfactory, even for relatively large values of the chord-height ratio.

Allen, H Julian↗

Modeling the effects of latitudinal gradients in stellar winds, with application to the solar wind

A steady, axisymmetric, quasi-radial, global model previously developed for stellar winds with embedded magnetic fields has been extended to include latitudinal gradient effects on the azimuthal velocity and magnetic field. The linear results at large radii are presented for large-amplitude latitudinal variations in the radial magnetic field, mass loss rate, and radial velocity of the wind. The magnetohydrodynamic (MHD) equations predict meridional flows that develop naturally from internal magnetic stresses. The flows open flux tubes in the star's equatorial plane, redistributing mass and magnetic flux as a function of stellar latitude. The plasma spins up to conserve angular momentum in fields and plasma. The results are generally applicable to stellar winds (including radiatively driven winds), provided that the internal structure is not dominated by rotation. The asymptotic solutions do not explicitly depend on the form of the energy equation, although the assumed O(1) state which drives these solutions depends on the deposition of energy and momentum throughout the wind.

Nerney, S.↗

COMPOSITION OF CORONAL MASS EJECTIONS

We analyze the physical origin of plasmas that are ejected from the solar corona. To address this issue, we perform a comprehensive analysis of the elemental composition of interplanetary coronal mass ejections (ICMEs) using recently released elemental composition data for Fe, Mg, Si, S, C, N, Ne, and He as compared to O and H. We find that ICMEs exhibit a systematic abundance increase of elements with first ionization potential (FIP) < 10 eV, as well as a significant increase of Ne as compared to quasi-stationary solar wind. ICME plasmas have a stronger FIP effect than slow wind, which indicates either that an FIP process is active during the ICME ejection or that a different type of solar plasma is injected into ICMEs. The observed FIP fractionation is largest during times when the Fe ionic charge states are elevated above Q {sub Fe} > 12.0. For ICMEs with elevated charge states, the FIP effect is enhanced by 70% over that of the slow wind. We argue that the compositionally hot parts of ICMEs are active region loops that do not normally have access to the heliosphere through the processes that give rise to solar wind. We also discuss the implications of this result for solar energetic particles accelerated during solar eruptions and for the origin of the slow wind itself.

79 ASTRONOMY AND ASTROPHYSICS↗