Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Germanium-tin p-i-n photodetectors integrated on silicon grown by molecular beam epitaxy

GeSn heterojunction p-i-n diodes with a Sn content of 0.5% are grown with a special low temperature molecular beam epitaxy. The Sn incorporation in Ge is facilitated by a very low temperature growth step in order to suppress Sn surface segregation. Diodes with sharp doping transitions are realized as double mesa structures with a diameter from 1.5 up to 80 {mu}m. An optical responsivity of these GeSn diodes of 0.1 A/W at a wavelength of {lambda}=1.55 {mu}m is measured. In comparison with a pure Ge detector the optical responsivity is increased by factor of 3 as a result of Sn caused band gap reduction.

36 MATERIALS SCIENCE↗

Elemental distribution and oxygen deficiency of magnetron sputtered indium tin oxide films

The atomic structure and composition of noninterfacial ITO and ITO-Si interfaces were studied with transmission electron microscopy and x-ray photoelectron spectroscopy (XPS). The films were deposited by dc magnetron sputtering on monocrystalline p-type (100) Si wafers. Both as deposited and heat treated films consisted of crystalline ITO. The ITO/Si interface showed a more complicated composition. A thin layer of SiO{sub x} was found at the ITO/Si interface together with In and Sn nanoclusters, as well as highly oxygen deficient regions, as observed by XPS. High energy electron exposure of this area crystallized the In nanoclusters and at the same time increased the SiO{sub x} interface layer thickness.

36 MATERIALS SCIENCE↗

Reactive magnetron sputtering of Cu{sub 2}O: Dependence on oxygen pressure and interface formation with indium tin oxide

Thin films of copper oxides were prepared by reactive magnetron sputtering and structural, morphological, chemical, and electronic properties were analyzed using x-ray diffraction, atomic force microscopy, in situ photoelectron spectroscopy, and electrical resistance measurements. The deposition conditions for preparation of Cu(I)-oxide (Cu{sub 2}O) are identified. In addition, the interface formation between Cu{sub 2}O and Sn-doped In{sub 2}O{sub 3} (ITO) was studied by stepwise deposition of Cu{sub 2}O onto ITO and vice versa. A type II (staggered) band alignment with a valence band offset {Delta}E{sub VB} 2.1-2.6 eV depending on interface preparation is observed. The band alignment explains the nonrectifying behavior of p-Cu{sub 2}O/n-ITO junctions, which have been investigated for thin film solar cells.

36 MATERIALS SCIENCE↗

Indium tin oxide-free transparent and conductive electrode based on SnO{sub x} | Ag | SnO{sub x} for organic solar cells

A SnO{sub x} | Ag | SnO{sub x} multilayer deposited by E-beam evaporation is proposed as transparent anode for a (poly-3-hexylthiophene):[6,6]-phenyl-C{sub 61}-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction based Organic Solar Cell (OSC). Such multilayers are studied and manufactured with the objective to give to the electrode its best conductivity and transparency in the visible spectral range. A transfer matrix method numerical optimization of the thicknesses of each layer of the electrode is developed to limit the number of test samples which would have been manufactured whether an empirical method was chosen. Optical characterization of the deposited SnO{sub x} and Ag thin films is performed to determine the dispersion of the complex refractive indices which are used as input parameters in the model. A satisfying agreement between numerical and experimental optical properties is found. The bare tri-layer electrodes show low sheet resistance (as low as 6.7 Ω/□) and the whole Glass | SnO{sub x} | Ag | SnO{sub x} structure presents a mean transparency on 400–700 nm spectral band as high as 67%. The multilayer is then numerically studied as anode for a P3HT:PCBM bulk heterojunction based OSC. Intrinsic absorption inside the sole active layer is calculated giving the possibility to perform optical optimization on the intrinsic absorption efficiency inside the active area by considering the media embedding the electrodes. An additional study using the morphology of the silver inserted between both oxide layers as input data is performed with a finite difference time domain 3D-method to improve the accordance between optical measurements and numerical results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for double-{beta} decays of tin isotopes with enhanced sensitivity

A search for the various double-{beta} decay modes of {sup 124}Sn and {sup 112}Sn has been performed on 75 kg days of data. New half-life limits for excited states in {sup 124}Sn have been obtained including a lower limit for decay into the first excited 2{sup +} state of {sup 124}Te of T{sub 1/2}>0.87x10{sup 20} yr (90% C.L.) and into the first excited 0{sup +} state of T{sub 1/2}>1.08x10{sup 20} yr (90% C.L.). Ground state and excited state transitions of {sup 112}Sn have also been experimentally explored. A limit for the 2{nu} EC/EC of T{sub 1/2}>1.8x10{sup 19} yr (90% C.L.) is obtained. The nonobservation of deexcitation {gamma} from the 0{sup +} at 1888.5 keV results in a lower half-life limit on the 0{nu} EC/EC decay of {sup 112}Sn of T{sub 1/2}>0.8x10{sup 19}yr (90% C.L.), despite a possible resonant enhancement of the decay rate due to degenerated states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

X-ray photoelectron spectroscopy study on the chemistry involved in tin oxide film growth during chemical vapor deposition processes

The chemistry of atmospheric pressure chemical vapor deposition (APCVD) processes is believed to be complex, and detailed reports on reaction mechanisms are scarce. Here, the authors investigated the reaction mechanism of monobutyl tinchloride (MBTC) and water during SnO{sub 2} thin film growth using x-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). XPS results indicate an acid-base hydrolysis reaction mechanism, which is tested with multilayer experiments, demonstrating self-terminating growth. In-house developed TEM wafers are used to visualize nucleation during these multilayer experiments, and results are compared with TEM results of APCVD samples. Results show almost identical nucleation behavior implying that their growth mechanism is identical. Our experiments suggest that in APCVD, when using MBTC and water, SnO{sub 2} film growth occurs via a heterolytic bond splitting of the Sn-Cl bonds without the need to invoke gas-phase radical or coordination chemistry of the MBTC precursor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room-temperature gas sensing through electronic coupling between tin oxide nanocrystal and carbon nanotube

A new gas-sensing platform for low-concentration gases (NO{sub 2}, H{sub 2}, and CO) comprises discrete SnO{sub 2} nanocrystals uniformly distributed on the surface of multiwalled carbon nanotubes (CNTs). The resulting hybrid nanostructures are highly sensitive, even at room temperature, because their gas sensing abilities rely on electron transfer between the nanocrystals and the CNTs.

36 MATERIALS SCIENCE↗

A Robust and Conductive Black Tin Oxide Nanostructure Makes Efficient Lithium-Ion Batteries Possible

SnO 2 -based lithium-ion batteries have low cost and high energy density, but their capacity fades rapidly during lithiation/delithiation due to phase aggregation and cracking. These problems can be mitigated by using highly conducting black SnO 2-x , which homogenizes the redox reactions and stabilizes fine, fracture-resistant Sn precipitates in the Li 2 O matrix. Such fine Sn precipitates and their ample contact with Li 2 O proliferate the reversible Sn → Li x Sn → Sn → SnO 2 /SnO 2-x cycle during charging/discharging. SnO 2-x electrode has a reversible capacity of 1340 mAh g -1 and retains 590 mAh g -1 after 100 cycles. The addition of highly conductive, well-dispersed reduced graphene oxide further stabilizes and improves its performance, allowing 950 mAh g -1 remaining after 100 cycles at 0.2 A g -1 with 700 mAh g -1 at 2.0 A g -1 . Conductivity-directed microstructure development may offer a new approach to form advanced electrodes.

25 ENERGY STORAGE↗

“Unleaded” Perovskites: Status Quo and Future Prospects of Tin-Based Perovskite Solar Cells

The tremendous interest focused on organic–inorganic halide perovskites since 2012 derives from their unique optical and electrical properties, which make them excellent photovoltaic materials. Pb-based halide perovskite solar cells, in particular, currently stand at a record efficiency of ≈23%, fulfilling their potential toward commercialization. However, because of the toxicity concerns of Pb-based perovskite solar cells, their market prospects are hindered. In principle, Pb can be replaced with other less-toxic, environmentally benign metals. Sn-based perovskites are thus the far most promising alternative due to their very similar and perhaps even superior semiconductor characteristics. Additionally, after years of effort invested in Sn-based halide perovskites, sufficient breakthroughs have finally been achieved that make them the next runners up to the Pb halide perovskites. To help the reader better understand the nature of Sn-based halide perovskites, their optical and electrical properties are systematically discussed. Recent progress in Sn-based perovskite solar cells, focusing mainly on film fabrication methods and different device architectures, and highlighting roadblocks to progress and opportunities for future work are reviewed. Finally, a brief overview of mixed Sn/Pb-based systems with their anomalous yet beneficial optical trends are discussed. The current challenges and a future outlook for Sn-based perovskites are discussed.

14 SOLAR ENERGY↗

Rational Design of A Chemical Bath Deposition Based Tin Oxide Electron Transport Layer for Perovskite Photovoltaics

Chemical bath deposition is widely used to deposit SnO x as an electron transport layer in perovskite solar cells (PSCs). The conventional recipe uses thioglycolic acid (TGA) to facilitate attachments of SnO x particles onto the substrate. However, nonvolatile TGA has been reported to harm the operational stability of PSCs. In this work, we introduced a volatile oxalic acid (OA) as an alternative to TGA. OA, a dicarboxylic acid, functions as a chemical linker for the nucleation and attachment of particles to the substrate in the chemical bath. Moreover, OA can be readily removed through thermal annealing followed by a mild H 2 O 2 treatment, as shown by FTIR measurements. Synergistically, the mild H 2 O 2 treatment selectively oxidizes the surface of the SnOx layer, minimizing nonradiative interface carrier recombination. EELS (electron-energy-loss-spectroscopy) confirms that the SnO x surface is dominated by Sn 4+ , while the bulk is a mixture of Sn 2+ and Sn 4+ . This rational design of a CBD SnO x layer leads to devices with T85~1,500h, a significant improvement over the TGA-based device with T80~250h. Our champion device reached a power conversion efficiency of 24.6%. This work offers a rationale for optimizing the complex parameter space of CBD SnO x to achieve efficient and stable PSCs.

14 SOLAR ENERGY↗

Indium tin oxide and silver based fiber optic SPR sensor: an experimental study

Fabrication and characterization of SPR based fiber optic sensor utilizing bi-layers of ITO-Ag is presented. Effects of thicknesses of ITO and Ag layers on the sensitivity of sensor are studied experimentally. Sensitivity ascends as the thickness of Ag layer is enhanced till 30 nm and it starts decreasing as the thickness of Ag layers is further increased beyond 30 nm. SPR sensor based on 40 nm thick ITO layer-30 nm thick Ag layer demonstrates highest sensitivity.

36 MATERIALS SCIENCE↗

Impact of Gold Thickness on Interfacial Evolution and Subsequent Embrittlement of Tin–Lead Solder Joints

Although gold remains a preferred surface finish for components used in high-reliability electronics, rapid developments in this area have left a gap in the fundamental understanding of solder joint gold (Au) embrittlement. Furthermore, as electronic designs scale down in size, the effect of Au content is not well understood on increasingly smaller solder interconnections. As a result, previous findings may have limited applicability. The current study focused on addressing these gaps by investigating the interfacial microstructure that evolves in 63Sn-37Pb solder joints as a function of Au layer thickness. Those findings were correlated to the mechanical performance of the solder joints. Increasing the initial Au concentration decreased the mechanical strength of a joint, but only to a limited degree. Kirkendall voids were the primary contributor to low-strength joints, while brittle fracture within the intermetallic compounds (IMC) layers is less of a factor. The Au embrittlement mechanism appears to be self-limiting, but only once mechanical integrity is degraded. Sufficient void evolution prevents continued diffusion from the remaining Au.

36 MATERIALS SCIENCE↗

Flux growth of a new cobalt-zinc-tin ternary phase Co{sub 7+x}Zn{sub 3-x}Sn{sub 8} and its relationship to CoSn

The intermetallic compound Co{sub 7+x}Zn{sub 3-x}Sn{sub 8} (-0.2<x<0.2) forms from the reaction of cobalt in zinc/tin eutectic flux. This phase has a new structure type in orthorhombic space group Cmcm, with unit cell parameters a=4.138(1) A, b=12.593(4) A, and c=11.639(4) A (Z=2; R{sub 1}=0.0301). Varying the amount of cobalt in the synthesis leads to formation of a superstructure in space group Pnma, with lattice parameters a=12.5908(2) A, b=11.6298(3) A, and c=8.2704(2) A (Z=4; R{sub 1}=0.0347). A Co/Zn mixed site and a partially occupied Co site in the Cmcm structure order to form the Pnma supercell. TGA/DSC studies indicate that the binary phase CoSn initially forms in the flux at 1173 K, and then reacts with the zinc in the cooling solution to form the ternary structure at 823 K. This phase exhibits Pauli paramagnetic behavior. - Graphical abstract: Co{sub 7+x}Zn{sub 3-x}Sn{sub 8} forms from the reaction of cobalt in zinc/tin eutectic flux; it exhibits a Cmcm subcell or Pnma supercell depending on reactant stoichiometry. Highlights: > Co{sub 7+x}Zn{sub 3-x}Sn{sub 8} grows from reaction of cobalt in Zn/Sn eutectic flux. > Varying Co in reaction stoichiometry yields Cmcm subcell or Pnma supercell structure. > Co{sub 7+x}Zn{sub 3-x}Sn{sub 8} structural building blocks similar to those in CoSn binary phase. > Co{sub 7+x}Zn{sub 3-x}Sn{sub 8} forms from reaction of CoSn in the Zn/Sn flux.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hall mobility in tin iodide perovskite CH{sub 3}NH{sub 3}SnI{sub 3}: Evidence for a doped semiconductor

CH{sub 3}NH{sub 3}SnI{sub 3} is a metal halide perovskite that shows metallic conductivity over a wide temperature range, although ab initio calculations and optical absorption indicate that its band structure is consistent with that of an intrinsic semiconductor. Hall effect measurements of as-grown crystals give a hole concentration of about 9×10{sup 17} cm{sup −3} with rather high Hall mobility of about 200 cm{sup 2} V{sup −1} s{sup −1} at 250 K. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility. These observations indicate that the electronic structure in stoichiometric CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. This situation leads to metal-like conduction with even a trace amount of spontaneous hole doping in the as-grown crystal. - Graphical abstract: Hall effect measurements of as-grown CH{sub 3}NH{sub 3}SnI{sub 3} crystals give a hole concentration of about 9×10{sup 17} cm{sup −3}. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility, indicating that the electronic structure of CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. Display Omitted - Highlights: • Hole concentration in highly conducting CH{sub 3}NH{sub 3}SnI{sub 3} was determined. • Hall mobility was not affected by artificial hole doping. • The electronic structure can be described as that of an intrinsic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel superstructure of the rocksalt type and element distribution in germanium tin antimony tellurides

A superstructure of the rocksalt-type observed in quenched CVT-grown single crystals of Ge{sub 3.25(7)}Sn{sub 1.10(3)}Sb{sub 1.10(3)}Te{sub 6} was elucidated by X-ray diffraction using fourfold twinned crystals (space group P3{sup ¯}m1, a=4.280(1) Å, c=20.966(3) Å). The structure is built up of distorted rocksalt-type building blocks typical for long-range ordered GST materials and substitution variants thereof. In contrast to those phases, an exclusive ABC-type cubic stacking sequence of the Te-atom layers is present. High-resolution electron microscopy reveals spheroidal domains with this structure (average diameter 25 nm) whose stacking direction is perpendicular to the 〈1 1 1〉 directions of the basic rocksalt-type structure. Additional slab-like domains with a lateral extension up to 1 µm occasionally result in a hierarchical structure motif. Due to the similar electron counts of the elements involved, resonant diffraction was used in order to elucidate the element distribution in rocksalt-type building blocks of the stable layered compound 39R-Ge{sub 3}SnSb{sub 2}Te{sub 7} (R3{sup ¯}m, a=4.24990(4) Å, c=73.4677(9) Å). Sb tends to occupy the atom site close to the van der Waals gaps while Ge concentrates in the center of the building blocks. - Graphical abstract: High-resolution transmission electron micrograph, SAED pattern and reciprocal lattice section of X-ray single crystal data of Ge{sub 3.25}Sn{sub 1.1}Sb{sub 1.1}Te{sub 6} with an 11P-type superstructure of the rocksalt type. - Highlights: • A novel superstructure of the rocksalt-type in the system Ge–Sn–Sb–Te is elucidated. • It combines the cubic stacking of the HT phase with building blocks of the RT phase. • It indicates the ordering mechanism during the phase transition of GST materials. • A hierarchical structure motif is promising with respect to the reduction of κ{sub L}. • Resonant diffraction reveals the element distribution in 39R-Ge{sub 3}SnSb{sub 2}Te{sub 7}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coalescence growth mechanism of inserted tin dioxide belts in polycrystalline SnO2-based ceramics

Highlights: • Grain growth in SnO{sub 2}-based varistors was studied. • The growth of 1D SnO{sub 2} belts in the SnO{sub 2}-CoO-Cr{sub 2}O{sub 3}-Nb{sub 2}O{sub 5} system occurs by coalescence process. • Cross-Section and Tomography images showed tridimensional and pore free “giant grains”. • TEM was used to prove the alignment of the grains towards the SnO{sub 2} belt. • The coalescence growth just occurs with 1D structure and grains having the same crystal structure. - Abstract: SnO{sub 2}-based varistors have been considered promising technological devices. However their practical application is usually stated as limited to high voltage circuits based on the high breakdown electric field exhibited by these ceramics. Recently, authors have shown that the insertion of one-dimensional (1D) SnO{sub 2} belts allows overcoming this limitation. In this work, we present a detailed study of the growth mechanism of the belts inside varistors using electron microscopy techniques. We were able to show that mass transport has an intrinsic dependence on the sintering time and requires similar crystalline structure between the belts and the matrix. Dual beam and high-resolution transmission electron microscopy techniques permitted determining that 3D growth of belts occurs by coalescence.

36 MATERIALS SCIENCE↗

Substitutional nitrogen-doped tin oxide single crystalline submicrorod arrays: Vertical growth, band gap tuning and visible light-driven photocatalysis

High-density substitutional N-doped SnO{sub 2} submicrorod arrays were grown on Si and quartz substrates by catalysts-free reactive sputtering. Scanning electron microscope and high-resolution transmission electron microscopy results show that the submicrorods are vertically aligned single crystal with quasi-tetrahedral pyramid shape nanotip at the top end. The density and the shape of the submicrorods can be modulated by the nitrogen partial pressure. Ellipsometry and optical absorption characterization show that after substitutional N-doping, the band gap of N-doped SnO{sub 2} submicrorod shifts toward visible light region (up to 624 nm), and the visible light absorption are significantly enhanced due to the band gap narrowing. The photodegradation of methylene blue by N-doped SnO{sub 2} submicrorod under visible light illumination is demonstrated, and it was found that the surface-to-volume ratio plays an important role in achieving high photocatalytic reactivity. The SnO{sub 2}:N submicrorod arrays with visible light band gap may have potential applications in solar cells electrode and visible light sensitive photocatalyst.

36 MATERIALS SCIENCE↗

Synthesis and enhanced photocatalytic activity of tin oxide nanoparticles coated on multi-walled carbon nanotube

Highlights: {yields} SnO{sub 2} nanoparticles were uniformly deposited on carbon nanotubes. {yields} MWNT@SnO{sub 2} showed excellent photocatalytic activity. {yields} The quenched PL proved the existence of electron transfer between SnO{sub 2} and MWNT. -- Abstract: A nanocomposite of SnO{sub 2} nanoparticles coated on multi-walled carbon nanotube (MWNT@SnO{sub 2}) was synthesized and characterized by thermogravimetric analysis, X-ray diffraction, transmission electron microscopy, nitrogen physisorption measurements, photoluminescence. The results show that the SnO{sub 2} nanoparticles with a narrow size of 4 nm are uniformly deposited on MWNT. The photocatalytic activity of the nanocomposite was studied using methyl orange as a model organic pollutant. MWNT@SnO{sub 2} exhibits much higher photocatalytic activity than that of commercial TiO{sub 2} (P-25). The promotion is mainly contributed from electron transfer between SnO{sub 2} and MWNT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗