SEARCH · Engineering Papers

Results for “Stokes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Generalized conjugate-gradient methods for the Navier-Stokes equations

A generalized conjugate-gradient method is used to solve the two-dimensional, compressible Navier-Stokes equations of fluid flow. The equations are discretized with an implicit, upwind finite-volume formulation. Preconditioning techniques are incorporated into the new solver to accelerate convergence of the overall iterative method. The superiority of the new solver is demonstrated by comparisons with a conventional line Gauss-Siedel Relaxation solver. Computational test results for transonic flow (trailing edge flow in a transonic turbine cascade) and hypersonic flow (M = 6.0 shock-on-shock phenoena on a cylindrical leading edge) are presented. When applied to the transonic cascade case, the new solver is 4.4 times faster in terms of number of iterations and 3.1 times faster in terms of CPU time than the Relaxation solver. For the hypersonic shock case, the new solver is 3.0 times faster in terms of number of iterations and 2.2 times faster in terms of CPU time than the Relaxation solver.

Ajmani, Kumud↗

NASA NTRS1991

Numerical flux formulas for the Euler and Navier-Stokes equations. II - Progress in flux-vector splitting

The accuracy of various numerical flux functions for the inviscid fluxes when used for Navier-Stokes computations is studied. The flux functions are benchmarked for solutions of the viscous, hypersonic flow past a 10 degree cone at zero angle of attack using first order, upwind spatial differencing. The Harten-Lax/Roe flux is found to give a good boundary layer representation, although its robustness is an issue. Some hybrid flux formulas, where the concepts of flux-vector and flux-difference splitting are combined, are shown to give unsatisfactory pressure distributions; there is still room for improvement. Investigations of low diffusion, pure flux-vector splittings indicate that a pure flux-vector splitting can be developed that eliminates spurious diffusion across the boundary layer. The resulting first-order scheme is marginally stable and not monotone.

Coirier, William J.↗

NASA NTRS1991

Conservative multizonal interface algorithm for the 3-D Navier-Stokes equations

A conservative zonal interface algorithm using features of both structured and unstructured mesh CFD technology is presented. The flow solver within each of the zones is based on structured mesh CFD technology. The interface algorithm was implemented into two three-dimensional Navier-Stokes finite volume codes and was found to yield good results.

Klopfer, G. H.↗

NASA NTRS1991

Verification of the Proteus two-dimensional Navier-Stokes code for flat plate and pipe flows

The Proteus Navier-Stokes Code is evaluated for two-dimensional/axisymmetric, viscous, incompressible, internal and external flows. The particular cases to be discussed are laminar and turbulent flows over a flat plate, laminar and turbulent dveloping pipe flows and turbulent pipe flow with swirl. Results are compared with exact solutions, empirical correlations and experimental data. A detailed description of the code set-up, including boundary conditions, intitial conditions, grid size and grid packing is given for each case.

Conley, Julianne M.↗

NASA NTRS1991

Least-squares/parabolized Navier-Stokes procedure for optimizing hypersonic wind tunnel nozzles

A new procedure is demonstrated for optimizing hypersonic wind-tunnel-nozzle contours. The procedure couples a CFD computer code to an optimization algorithm, and is applied to both conical and contoured hypersonic nozzles for the purpose of determining an optimal set of parameters to describe the surface geometry. A design-objective function is specified based on the deviation from the desired test-section flow-field conditions. The objective function is minimized by optimizing the parameters used to describe the nozzle contour based on the solution to a nonlinear least-squares problem. The effect of the changes in the nozzle wall parameters are evaluated by computing the nozzle flow using the parabolized Navier-Stokes equations. The advantage of the new procedure is that it directly takes into account the displacement effect of the boundary layer on the wall contour. The new procedure provides a method for optimizing hypersonic nozzles of high Mach numbers which have been designed by classical procedures, but are shown to produce poor flow quality due to the large boundary layers present in the test section. The procedure is demonstrated by finding the optimum design parameters for a Mach 10 conical nozzle and a Mach 6 and a Mach 15 contoured nozzle.

Korte, John J.↗

NASA NTRS1991

A three-dimensional Navier-Stokes stage analysis of the flow through a compact radial turbine

A steady, three-dimensional Navier-Stokes average passage computer code is used to analyze the flow through a compact radial turbine stage. The code is based upon the average passage set of equations for turbomachinery, whereby the flow fields for all passages in a given blade row are assumed to be identical while retaining their three-dimensionality. A stage solution is achieved by alternating between stator and rotor calculations, while coupling the two solutions by means of a set of axisymmetric body forces which model the absent blade row. Results from the stage calculation are compared with experimental data and with results from an isolated rotor solution having axisymmetric inlet flow quantities upstream of the vacated stator space. Although the mass-averaged loss through the rotor is comparable for both solutions, the details of the loss distribution differ due to stator effects. The stage calculation predicts smaller spanwise variations in efficiency, in closer agreement with the data. The results of the study indicate that stage analyses hold promise for improved prediction of loss mechanisms in multi-blade row turbomachinery, which could lead to improved designs through the reduction of these losses.

Heidmann, James D.↗

NASA NTRS1991

Three-dimensional incompressible Navier-Stokes solver using lower-upper symmetric-Gauss-Seidel algorithm

A numerical method based on the pseudocompressibility concept is developed for solving the three-dimensional incompressible Navier-Stokes equations using the lower-upper symmetric-Gauss-Seidel implicit scheme. Very high efficiency is achieved in a new flow solver, INS3D-LU code, by accomplishing the complete vectorizability of the algorithm on oblique planes of sweep in three dimensions.

Yoon, Seokkwan↗

NASA NTRS1990

Implicit methods for the Navier-Stokes equations

Numerical solutions of the Navier-Stokes equations using explicit schemes can be obtained at the expense of efficiency. Conventional implicit methods which often achieve fast convergence rates suffer high cost per iteration. A new implicit scheme based on lower-upper factorization and symmetric Gauss-Seidel relaxation offers very low cost per iteration as well as fast convergence. High efficiency is achieved by accomplishing the complete vectorizability of the algorithm on oblique planes of sweep in three dimensions.

Yoon, S.↗

NASA NTRS1990

A review of reduced Navier-Stokes computations for compressible viscous flows

A reduced form of the Navier-Stokes equations, defined by a single composite of the Euler, boundary layer, and triple deck approximations, is considered for the computation of viscous interacting flows. Global pressure or pseudopotential relaxation methods are integrated with coupled sparse matrix direct solvers or coupled strongly implicit ILU algorithms to efficiently capture sharp shocks and regions of recirculation. Solutions are obtained for a variety of 2D and 3D geometries and for Mach numbers (M) spanning the range from incompressible (M = 0) to supersonic (M = 6) flow.

Rubin, S. G.↗

NASA NTRS1991

Three-Dimensional Navier-Stokes Simulation of Space Shuttle Main Propulsion 17-inch Disconnect Valves

A steady incompressible three-dimensional viscous flow analysis has been conducted for the Space Shuttle external tank/orbiter propellant feed line disconnect flapper valves with upstream elbows. The Navier-Stokes code, INS3D, is modified to handle interior obstacles and a simple turbulence model. The flow solver is tested for stability and convergence in the presence of interior flappers. An under-relaxation scheme has been incorporated to improve the solution stability. Important flow characteristics such as secondary flows, recirculation, vortex and wake regions, and separated flows are observed. Computed values for forces, moments, and pressure drop are in satisfactory agreement with water flow test data covering a maximum tube Reynolds number of 3.5 million. The predicted hydrodynamical stability of the flappers correlates well with the measurements.

Kandula, M.↗

NASA NTRS1991

Navier-Stokes solutions for an oscillating double-delta wing

An upwind-biased implicit scheme is used to investigate steady-state and unsteady Navier-Stokes solutions of the vortical flow over a double-delta wing configuration. The governing equations are solved numerically with a fully upwind, implicit, iterative, and factorized numerical scheme. Steady-state solutions for fixed angles of attack and unsteady solutions for a sinusoidal oscillatory motion are obtained. The steady-state solutions on the baseline grid are in agreement with the experiment, and grid refinements show some improvements of the predictions. The higher-order accuracy of the present scheme yields equivalent solutions on smaller grid densities compared to solutions obtained with a second-order accurate method on larger grids. As the angle of attack increases, the grid resolution requirements for adequate resolution of the leeward-side vortical flowfield become very severe. The unsteady solutions are in general agreement with the measurements and show a qualitative correlation with the experiment.

Ekaterinaris, John A.↗

NASA NTRS1991

Evaluation of a three-dimensional Navier-Stokes solver for transonic flow over a low-aspect-ratio wing mounted in a wind tunnel

A three dimensional Navier-Stokes solver is evaluated for transonic flow over a thin, swept, low-aspect ratio wing. The computational study was undertaken in support of a wind tunnel experimental program. The computational results are compared to experimental surface pressure data obtained in a cryogenic wind tunnel with an adaptive wall test section. The results show favorable agreement over a wide range of conditions, further the numerical results provide additional data of the complex three-dimensional flow field. Differences in the predictions and experiment suggest a need to conduct further experiments to evaluate the adaptive wall testing technique, and to model the tunnel sidewall boundary layer in the computations.

Milholen, William E., II↗

NASA NTRS1991

Three-dimensional Navier-Stokes asymmetric solutions for cones and cone-cylinder configurations

The unsteady, compressible, thin-layer Navier-Stokes equations are used to obtain three-dimensional, asymmetric, vortex-flow solutions around cones and conecylinder configurations. The equations are solved using an implicit, upwind, flux-difference splitting, finite-volume scheme. The computational applications cover asymmetric flows around a 5 deg semiapex angle cone of unit length at various Reynolds number. Next, a cylindrical afterbody of various length is added to the conical forebody to study the effect of the length of cylindrical afterbody on the flow asymmetry. One of the computational solutions has been validated by comparing the computed surface pressure with those of the experimental data. All the asymmetric flow solutions have been obtained by using a short-duration side-slip disturbance.

Kandil, Osama A.↗

NASA NTRS1991

Numerical analysis of rarefied slit flows. II - Navier-Stokes simulations

The model problem of pressure-driven flow of a rarefied monatomic gas through a two-dimensional slit is analyzed via full Navier-Stokes numerical simulation. Parametric solutions are generated for slit-height based Knudsen number ranging from continuum to transitional flow and for reservoir pressure ratios leading to subsonic and supersonic flow. The change in the structure of the flowfield near the slit as a function of pressure ratio and Knudsen number are quantified from a purely continuum standpoint. The choice of numerical domain size, boundary conditions and treatment of the slit are also discussed. As expected, comparison with a Direct Simulation Monte Carlo solution for a highly rarefied case shows large differences in the predicted mass flow. The cause of these differences can be quantified through detailed comparison of the local flowfield properties. For the larger pressure ratio cases qualitative trends with increasing rarefaction are discussed, including the change in the sonic line shape in the slit and the in total mass flow.

Wadsworth, D. C.↗

NASA NTRS1991

3-D Navier-Stokes analysis of crossing, glancing shocks/turbulent boundary layer interactions

Three dimensional viscous flow analysis is performed for a configuration where two crossing and glancing shocks interact with a turbulent boundary layer. A time marching 3-D full Navier-Stokes code, called PARC3D, is used to compute the flow field, and the solution is compared to the experimental data obtained at the NASA Lewis Research Center's 1 x 1 ft supersonic wind tunnel facility. The study is carried out as part of the continuing code assessment program in support of the generic hypersonic research at NASA Lewis. Detailed comparisons of static pressure fields and oil flow patterns are made with the corresponding solution on the wall containing the shock/boundary layer interaction in an effort to validate the code for hypersonic inlet applications.

Reddy, D. R.↗

NASA NTRS1991

Navier-Stokes simulation of the supersonic combustion flowfield in a ram accelerator

A computational study of the ram accelerator, a ramjet-in-tube device for accelerating projectiles to ultrahigh velocities, is presented. The analysis is performed using a fully implicit TVD scheme that efficiently solves the Reynolds-averaged Navier-Stokes equations and the species continuity equations associated with a finite rate combustion model. The present results indicate that viscous effects are of primary importance in all the cases studied, shock-induced combustion always started in the boundary layer. The effects of Mach number, mixture composition, pressure and tubulence are investigated for various configurations. Two types of combustion processes, one stable and the other unstable, were observed depending on the inflow conditions. The possibility of stabilizing the detonation wave by means of a backward facing step is also investigated. Two numerical techniques were tested: vector extrapolation, to accelerate convergence, and a diagonal formulation that eliminates the expense of inverting large block matrices which arise in chemically reacting flows.

Yungster, Shaye↗

NASA NTRS1991

Three-dimensional Navier-Stokes analysis of turbine passage heat transfer

The three-dimensional Reynolds-averaged Navier-Stokes equations are numerically solved to obtain the pressure distribution and heat transfer rates on the endwalls and the blades of two linear turbine cascades. The TRAF3D code which has recently been developed in a joint project between researchers from the University of Florence and NASA Lewis Research Center is used. The effect of turbulence is taken into account by using the eddy viscosity hypothesis and the two-layer mixing length model of Baldwin and Lomax. Predictions of surface heat transfer are made for Langston's cascade and compared with the data obtained for that cascade by Graziani. The comparison was found to be favorable. The code is also applied to a linear transonic rotor cascade to predict the pressure distributions and heat transfer rates.

Ameri, Ali A.↗

NASA NTRS1991

A multi-passage three-dimensional Navier-Stokes simulation of turbine rotor-stator interaction

This paper deals with the development and validation of a 3D multipassage Navier-Stokes code for predicting the unsteady effects due to rotor-stator interaction in turbomachines. Prior work in two dimensions has demonstrated the necessity of including multiple rotor and stator passages in order to closely approximate the stator-to-rotor airfoil count ratio and thus accurately predict the unsteady flowfield resulting from rotor-stator interaction. In the present paper, this multipassage capability is extended to three dimensions. Numerical results obtained from a multipassage (three stator and four rotor passage) calculation of an axial turbine stage are presented. The stator-to-rotor airfoil count ratio (3:4) used in the present calculations is a close approximation to that in the actual turbine configuration (22:28). The present multipassage calculation results in a more accurate prediction of the unsteady flowfield than that possible from a single-passage calculation.

Madavan, N. K.↗