Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Probing the Chemical Stability of Mixed Ferrites: Implications for Magnetic Resonance Contrast Agent Design

Nanomaterials with mixed composition, in particular magnetic spinel ferrites, are emerging as efficient contrast agents for magnetic resonance imaging. Many factors, including size, composition, atomic structure, and surface properties, are crucial in the design of such nanoparticle-based probes because of their influence on the magnetic properties. Silica-coated iron oxide (IO-SiO{sub 2}) and cobalt ferrite (CoIO-SiO{sub 2}) nanoparticles were synthesized using standard high-temperature thermal decomposition and base-catalyzed water-in-oil microemulsion techniques. Under neutral aqueous conditions, it was found that 50-75% of the cobalt content in the CoIO-SiO{sub 2} nanoparticles leached out of the core structure. Leaching caused a 7.2-fold increase in the longitudinal relaxivity and an increase in the saturation magnetization from {approx}48 to {approx}65 emu/g of the core. X-ray absorption fine structure studies confirmed that the atomic structure of the ferrite core was altered following leaching, while transmission electron microscopy and dynamic light scattering confirmed that the morphology and size of the nanoparticle remained unchanged. The CoIO-SiO{sub 2} nanoparticles converted from a partially inverted spinel cation arrangement (unleached state) to an inverse spinel arrangement (leached state). The control IO-SiO{sub 2} nanoparticles remained stable with no change in the structure and negligible changes in the magnetic behavior. This detailed analysis highlights how important understanding the properties of nanomaterials is in the development of reliable agents for diagnostic and therapeutic applications.

36 MATERIALS SCIENCE↗

A general mechanism for stabilizing the small sizes of precious metal nanoparticles on oxide supports

We recently discovered that MgAl2O4 spinel {111} nano-facets optimally stabilize the small sizes of platinum nanoparticles even after severe high temperature aging treatments. Here we report the thermal stabilities of other precious metals with various physical and chemical properties on the MgAl2O4 spinel {111} facets, providing important new insights into the stabilization mechanisms. Besides Pt, Rh and Ir can also be successfully stabilized as small (1-3 nm) nanoparticles and even as single atomic species after extremely severe (800 °C, 1 week) oxidative aging. However, other metals either aggregate (Ru, Pd, Ag, and Au) or sublimate (Os) even during initial catalyst synthesis. On the basis of ab initio theoretical calculations and experimental observations, we rationalize that the exceptional stabilization originates from lattice matching, and the correspondingly strong attractive interactions at interfaces between the spinel {111} surface oxygens and epitaxial metals\metal oxides. On this basis, design principles for catalyst support oxide materials that are capable in stabilizing precious metals are proposed.

anti-sintering↗

Functioning Mechanism of AlF 3 Coating on the Li- and Mn-Rich Cathode Materials

We report systematic studies of the microstructural changes of uncoated and AlF3-coated Li-rich Mn-rich (LMR) cathode materials (Li1.2Ni0.15Co0.10Mn0.55O2) before and after cycling using a combination of aberration-corrected scanning/transmission electron microscopy (S/TEM) and electron energy loss spectroscopy (EELS). TEM coupled with EELS provides detailed information about the crystallographic and electronic structure changes that occur after cycling, thus revealing the fundamental improvement mechanism of surface coating. The results demonstrate that the surface coating reduces oxidation of the electrolyte at high voltage, suppressing the accumulation of a thick solid electrolyte interface (SEI) layer on electrode particle surface. Surface coating significantly enhances the stability of the surface structure and protects the electrode from severe etching/corrosion by the acidic species in the electrolyte, reducing the formation of etched surfaces and corrosion pits. Moreover, surface coating alleviates the undesirable voltage fade by mitigating layered to spinel-like phase transformation in the bulk region of the material. These fundamental findings may also be widely applied to explain the functioning mechanisms of other surface coatings used in a broad range of electrode materials.

Zheng, Jianming↗

A Strategy for Increasing the Efficiency of the Oxygen Reduction Reaction in Mn-Doped Cobalt Ferrites

Alkaline fuel cells have drawn increasing attention as next-generation energy-conversion devices for electrical vehicles, since high pH enables the use of non-precious-metal catalysts. Herein, we report on a family of rationally designed Mn-doped cobalt ferrite (MCF) spinel nanocrystals, with an optimal composition Mn 0.8 (CoFe 2 ) 0.73 O 4 (MCF-0.8), that are effective electrocatalysts for the oxygen reduction reaction. MCF-0.8 exhibits a half-wave potential (E 1/2 ) of 0.89 V vs RHE in 1 M NaOH, only 0.02 V less than that of commercial Pt/C under identical testing conditions and, to the best of our knowledge, one of the highest recorded values in the literature. Moreover, MCF-0.8 exhibits remarkable durability (ΔE 1/2 = 0.014 V) after 10 000 electrochemical cycles. In situ X-ray absorption spectroscopy (XAS) reveals that the superior performance of the trimetallic MCF-0.8 originates from the synergistic catalytic effect of Mn and Co, while Fe helps preserve the spinel structure during cycling. We employed in situ XAS to track the evolution of the oxidation states and the metal–oxygen distances not only under constant applied potentials (steady state) but also during dynamic cyclic voltammetry (CV) (nonsteady state). The periodic conversion between Mn(III, IV)/Co(III) and Mn(II, III)/Co(II) as well as the essentially constant oxidation state of Fe during the CV suggests collaboration efforts among Mn, Co, and Fe. Mn and Co serve as the synergistic coactive sites to catalyze the oxygen reduction, apparently resulting in the observed high activity, while Fe works to maintain the integrity of the spinel structure, likely contributing to the remarkable durability of the catalyst. Furthermore, these findings provide a mechanistic understanding of the electrocatalytic processes of trimetallic oxides under real-time fuel cell operating conditions. This approach provides a new strategy to design high-performance non-precious-metal electrocatalysts for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron implantation in {alpha}-Al{sub 2}O{sub 3}

Single crystal and ceramic {alpha}-Al{sub 2}O{sub 3} samples were implanted with {sup 57}Fe ions at different fluences, and different charge states of Fe were determined. The hyperfine interaction data showed that implanted ions are in Fe{sup 0}, Fe{sup 2+}, and Fe{sup 3+} states depending on the fluence. It is shown that after the annealing of the implanted sample in a 2.5CO 1CO{sub 2} atmosphere Fe spinel forms. The phase diagram of Fe-Al-O in a limited concentration range was studied by determining the hyperfine interaction parameters of the formed phases after annealing the samples in different atmospheres. The hyperfine interaction parameters of an ion implanted {alpha}-Al{sub 2}O{sub 3} sample annealed in a 2.5CO 1CO{sub 2} atmosphere at different temperatures were determined. The hyperfine interaction parameters of the gradually forming Fe-spinel phase were compared with the values of synthesized Fe-spinel crystal.

36 MATERIALS SCIENCE↗

Site Determination and Magnetism of Mn Doping in Protein Encapsulated Iron Oxide Nanoparticles

Soft-X-ray absorption spectroscopy, soft-X-ray magnetic circular dichroism, and alternating current magnetic susceptibility were performed on 6.7 nm iron oxide nanoparticles doped with (5-33%) Mn grown inside the horse-spleen ferritin protein cages and compared to similarly protein encapsulated pure Fe-oxide and Mn-oxide nanoparticles to determine the site of the Mn dopant and to quantify the magnetic behavior with varying Mn concentration. The Mn dopant is shown to substitute preferentially as Mn{sup +2} and prefers the octahedral site in the defected spinel structure. The Mn multiplet structure for the nanoparticles is simpler than for the bulk standards, suggesting that the nanoparticle lattices are relaxed from the distortions present in the bulk. Addition of Mn is found to alter the host Fe-oxide lattice from a defected ferrimagnetic spinel structure similar to {gamma}-Fe{sub 2}O{sub 3} to an non-ferromagnetic spinel structure with a local Fe environment similar to Fe{sub 3}O{sub 4}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

All-electron GW quasiparticle band structures of group 14 nitride compounds

We have investigated the group 14 nitrides (M{sub 3}N{sub 4}) in the spinel phase (γ-M{sub 3}N{sub 4} with M = C, Si, Ge, and Sn) and β phase (β-M{sub 3}N{sub 4} with M = Si, Ge, and Sn) using density functional theory with the local density approximation and the GW approximation. The Kohn-Sham energies of these systems have been first calculated within the framework of full-potential linearized augmented plane waves (LAPW) and then corrected using single-shot G{sub 0}W{sub 0} calculations, which we have implemented in the modified version of the Elk full-potential LAPW code. Direct band gaps at the Γ point have been found for spinel-type nitrides γ-M{sub 3}N{sub 4} with M = Si, Ge, and Sn. The corresponding GW-corrected band gaps agree with experiment. We have also found that the GW calculations with and without the plasmon-pole approximation give very similar results, even when the system contains semi-core d electrons. These spinel-type nitrides are novel materials for potential optoelectronic applications because of their direct and tunable band gaps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of defects and disorder on the electronic properties of ZnIr{sub 2}O{sub 4}

We analyze by means of ab initio calculations the role of imperfections on the electronic structure of ZnIr{sub 2}O{sub 4}, ranging from point defects in the spinel phase to the fully amorphous phase. We find that interstitial defects and anion vacancies in the spinel have large formation energies, in agreement with the trends observed in other spinels. In contrast, cation vacancies and antisites have lower formation energies. Among them, the zinc antisite and the zinc vacancy are the defects with the lowest formation energy. They are found to act as acceptors, and may be responsible for the spontaneous hole doping in the material. They may also induce optical transitions that would reduce the transparency of the material. Amorphization of ZnIr{sub 2}O{sub 4} leads a large decrease of the band gap and appearance of localized states at the edges of the band gap region, which may act as charge traps and prevent amorphous ZnIr{sub 2}O{sub 4} from being a good hole conductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of MgAl{sub 2}O{sub 4} tunnel barrier by radio frequency-sputtering method and magnetoresistance effect through it with Fe or Fe{sub 4}N ferromagnetic electrode

Spinel MgAl{sub 2}O{sub 4} thin films were deposited on MgO single-crystal substrates and epitaxial Fe (or Fe{sub 4}N) thin films by RF-sputtering from a ceramic target. Epitaxial relationship was confirmed by X-ray diffraction analysis between the crystalline spinel MgAl{sub 2}O{sub 4} films and the respective substrate and underlayers, while no diffraction peak was observed from the films deposited on amorphous substrates. Spin-valve type magnetic tunnel junctions (MTJs) with a stacking structure of Fe [Fe{sub 4}N]/MgAl{sub 2}O{sub 4}/CoFeB/Ru/Fe/MnIr exhibited normal [inverse] tunnel magnetoresistance (TMR) effect, reflecting the sign of spin polarization of Fe [Fe{sub 4}N]. The maximum magnitude of the TMR ratio obtained for the Fe-based and Fe{sub 4}N-based MTJs was 67% and 18%, respectively. The resistance area product values of the MTJs were significantly larger than the reported values for the MTJs with a post-oxidized spinel MgAl{sub 2}O{sub 4} barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice Mn3+ Behaviors in Li4Ti5O12/LiNi0.5Mn1.5O4 Full Cells

High voltage spinels LiNi0.5Mn1.5O4 (LNMO) with different contents of residual Mn3+ ions have been evaluated in full cells using Li4Ti5O12 (LTO) as standard anode. Greatly improved cycling stability has been observed for all spinels in LTO-limited full cell, compared with those in LNMO-limited ones, while the underlying mechanisms are quite different. It has been discovered that the participation of active Mn3+ in the extended cycling and thus its observable contribution to Li+ diffusion kinetics depend on the limiting electrode and the sufficiency of Li+ ions. Potential Mn dissolution has also been discussed to identify the key factors that need to be considered to construct full cells employing high voltage spinel as the cathode.

Energy storage↗

Crystal-Tolerant Glass Approach For Mitigation Of Crystal Accumulation In Continuous Melters Processing Radioactive Waste

High-level radioactive waste melters are projected to operate in an inefficient manner as they are subjected to artificial constraints, such as minimum liquidus temperature (T{sub L}) or maximum equilibrium fraction of crystallinity at a given temperature. These constraints substantially limit waste loading, but were imposed to prevent clogging of the melter with spinel crystals [(Fe, Ni, Mn, Zn)(Fe, Cr){sub 2}O{sub 4}]. In the melter, the glass discharge riser is the most likely location for crystal accumulation during idling because of low glass temperatures, stagnant melts, and small diameter. To address this problem, a series of lab-scale crucible tests were performed with specially formulated glasses to simulate accumulation of spinel in the riser. Thicknesses of accumulated layers were incorporated into empirical model of spinel settling. In addition, T{sub L} of glasses was measured and impact of particle agglomeration on accumulation rate was evaluated. Empirical model predicted well the accumulation of single crystals and/or smallscale agglomerates, but, excessive agglomeration observed in high-Ni-Fe glass resulted in an under-prediction of accumulated layers, which gradually worsen over time as an increased number of agglomerates formed. Accumulation rate of ~14.9 +- 1 nm/s determined for this glass will result in ~26 mm thick layer in 20 days of melter idling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CHARACTERIZATION OF VITRIFIED SAVANNAH RIVER SITE SB4 WASTE SURROGATE PRODUCED IN COLD CRUCIBLE

Savannah River Site (SRS) sludge batch 4 (SB4) waste surrogate with high aluminum and iron content was vitrified with commercially available Frit 503-R4 (8 wt.% Li{sub 2}O, 16 wt.% B2O3, 76 wt.% SiO{sub 2}) by cold crucible inductive melting using lab- (56 mm inner diameter), bench- (236 mm) and large-scale (418 mm) cold crucible. The waste loading ranged between 40 and 60 wt.%. The vitrified products obtained in the lab-scale cold crucible were nearly amorphous with traces of unreacted quartz in the product with 40 wt.% waste loading and traces of spinel phase in the product with 50 wt.% waste loading. The glassy products obtained in the bench-scale cold crucible are composed of major vitreous and minor iron-rich spinel phase whose content at {approx}60 wt.% waste loading may achieve {approx}10 vol.%. The vitrified waste obtained in the large-scale cold crucible was also composed of major vitreous and minor spinel structure phases. No nepheline phase has been found. Average degree of crystallinity was estimated to be {approx}12 vol.%. Anionic motif of the glass network is built from rather short metasilicate chains and boron-oxygen constituent based on boron-oxygen triangular units.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Biphase Cobalt-Manganese Oxide with High Capacity and Rate Performance for Aqueous Sodium-Ion Electrochemical Energy Storage

Manganese-based metal oxide electrode materials are of great importance in electrochemical energy storage for their favorable redox behavior, low cost and environmental-friendliness. However, their storage capacity and cycle life in aqueous Na-ion electrolytes is not satisfactory. In this paper, we report the development of a bi-phase cobalt-manganese oxide (Co-Mn-O) nanostructured electrode material, comprised of a layered MnO 2 .H 2 O birnessite phase and a (Co 0.83 Mn 0.13 Va 0.04 )tetra(Co 0.38 Mn 1.62 ) octa O 3.72 (Va: vacancy; tetra: tetrahedral sites; octa: octahedral sites) spinel phase, verified by neutron total scattering and pair distribution function analyses. The bi-phase Co-Mn-O material demonstrates an excellent storage capacity towards Na-ions in an aqueous electrolyte (121 mA h g -1 at a scan rate of 1 mV s -1 in the half-cell and 81 mA h g -1 at a current density of 2 A g -1 after 5000 cycles in full-cells), as well as high rate performance (57 mA h g -1 a rate of 360 C). Electro-kinetic analysis and in situ X-ray diffraction measurements further confirm that the synergistic interaction between the spinel and layered phases, as well as the vacancy of the tetrahedral sites of spinel phase, contribute to the improved capacity and rate performance of the Co-Mn-O material by facilitating both diffusion-limited redox and capacitive charge storage processes.

25 ENERGY STORAGE↗

Origin of 16 O-rich fine-grained Ca-Al-rich inclusions of different mineralogy and texture

We conducted a coordinated mineralogical and oxygen isotopic study of four fine-grained calcium-, aluminum-rich inclusions (CAIs) from the ALHA77307 CO3.0 carbonaceous chondrite. Three of the inclusions studied, 05, 1-65, and 2-119, all have nodular structures that represent three major groups, melilite-rich, spinel-rich, and hibonite-rich, based on their primary core mineral assemblages. A condensation origin was inferred for these CAIs. However, the difference in their primary core mineralogy reflects unique nebular environments in which multiple gas-solid reactions occurred under disequilibrium conditions to form hibonite, spinel, and melilite with minor perovskite and Al,Ti-rich diopside. A common occurrence of a diopside rim on the CAIs records a widespread event that marks the end of their condensation as a result of isolation from a nebular gas. An exception is a rare inclusion 2-112 that contains euhedral spinel crystals embedded in melilite, suggesting this CAI had been re-melted. All of the fine-grained CAIs analyzed in ALHA77307 are 16 O-rich with an average Δ 17 O value of ~-22 ± 5‰ (2σ), indicating no apparent correlation between their textures and oxygen isotopic compositions. We therefore conclude that a prevalent 16 O-rich gas reservoir existed in a region of the solar nebula where CO3 fine-grained CAIs formed, initially by condensation and then later, some of them were reprocessed by melting event(s).

58 GEOSCIENCES↗

Metallic Technetium Sequestration in Nickel Core/Shell Microstructure during Fe(OH)2 Transformation with Ni doping

This study investigates the impacts of Ni doping on technetium-99 (Tc) sequestration in aqueous solutions through transformation of Fe(OH)2(s) to iron spinel (magnetite) under alkaline conditions. Extensive solid characterization was performed for the mineral phases produced, as well as the Tc/Ni speciation and distribution within these phases. X-ray diffraction results show that iron spinel was the dominant mineral product without detectable Ni incorporation. The doped Ni ions mainly precipitated as fine Fe/Ni oxide/hydroxide particles, including strongly reduced nanometer?sized spheroidal Ni-rich and metallic Ni phases. High-resolution analytical scanning transmission electron microscopy using energy dispersive X-ray spectroscopy and electron energy loss spectroscopy on the produced solid samples (focused ion beam-prepared specimens) revealed three Tc distribution domains dominated by nanocrystals and, especially, a Tc-rich metallic phase. Instances of metallic Tc were specifically found in spheroidal, Ni-rich and metallic nanoparticles exhibiting a core/shell microstructure that suggests strong reduction and sequential precipitation of Ni-Tc-Ni. Mass balance analysis showed nearly 100% Tc removal from the 4.8 × 10-4 M Tc solutions. The finding of the metallic Tc encapsulation indicates that Tc sequestration through Ni-doped Fe(OH)2(s)?to?iron spinel transformation process likely provides an alternative treatment pathway for Tc removal and could be combined into further waste treatment approaches.

Wang, Guohui↗

Lithium diffusion in Li 4 Ti 5 O 12 at high temperatures

Synthesis of the spinel lithium titanate Li 4 Ti 5 O 12 by an alkoxide-free sol–gel method is described. This method yields highly pure and crystalline Li 4 Ti 5 O 12 samples at relatively low temperature (850 °C) and via short thermal treatment (2 h). 6 Li magic angle spinning nuclear magnetic resonance (MAS NMR) measurements on these samples were carried out at high magnetic field (21.1 T) and over a wide temperature range (295–680 K). The temperature dependence of the chemical shifts and integral intensities of the three 6 Li resonances demonstrates the migration of lithium ions from the tetrahedral 8a to the octahedral 16c sites and the progressive phase transition from a spinel to a defective NaCl-type structure. This defective structure has an increased number of vacancies at the 8a site, which facilitate lithium diffusion through 16c → 8a → 16c pathways, hence providing an explanation for the reported increase in conductivity at high temperatures. Molecular dynamics simulations of the spinel oxides Li 4+x Ti 5 O 12 , with 0 ≤ x ≤ 3, were also performed with a potential shell model in the temperature range 300–700 K. Finally, the simulations support the conclusions drawn from the NMR measurements and show a significant timescale separation between lithium diffusion through 8a and 16c sites and that out of the 16d sites.

Environmental Molecular Sciences Laboratory↗

Facile preparation of sphere-like copper ferrite nanostructures and their enhanced visible-light-induced photocatalytic conversion of benzene

Graphical abstract: - Highlights: • Spinel CuFe{sub 2}O{sub 4} nanospheres were successfully synthesized via a facile method. • CuFe{sub 2}O{sub 4} nanospheres showed high photocatalytic activity toward benzene. • Ethyl acetate, carboxylic acid and aldehyde were the intermediate products. - Abstract: Spinel copper ferrite nanospheres with diameters of about 116 nm were synthesized in high yield via a facile solvothermal route. The prepared nanospheres had cubic spinel structure and exhibited good size uniformity and regularity. The band-gap energy of CuFe{sub 2}O{sub 4} nanospheres was calculated to be about 1.69 eV, indicating their potential visible-light-induced photocatalytic activity. The dramatically enhanced photocatalytic activity of the CuFe{sub 2}O{sub 4} nanospheres was evaluated via the photocatalytic conversion of benzene under Xe lamp irradiation. By using the in situ FTIR technique, ethyl acetate, carboxylic acid and aldehyde could be regarded as the intermediate products, and CO{sub 2} was produced as the final product during the reaction process. This study provided new insight into the design and preparation of functional nanomaterials with sphere structure in high yield, and the as-grown architectures demonstrated an excellent ability to remove organic pollutants in the atmosphere.

36 MATERIALS SCIENCE↗

Radio frequency abnormal dielectric response of manganese chromite (MnCr{sub 2}O{sub 4}) nanoparticles synthesized by coprecipitation method

Highlights: • Uniform MnCr{sub 2}O{sub 4} nanoparticles synthesized by surfactant-free coprecipitation route. • XRD analysis confirmed the single spinel phase formation in the material. • Dielectric loss was found abnormal over certain lower frequencies. • AC conductivity proved the involvement of small polarons in conduction process. - Abstract: Radio frequency dielectric behavior of nanocrystalline MnCr{sub 2}O{sub 4} synthesized via surfactant-free controlled coprecipitation route has been studied. Keeping in view the necessity of particle size uniformity and phase purity for genuine performance, experimental conditions were optimized accordingly. The scanning electron micrographs of the synthesized product revealed the formation of monodispersed particle system. X-ray diffraction analysis confirmed monophasic spinel structure formation with 65 nm crystallite size. Two characteristic peaks observed between 700 cm{sup −1} and 400 cm{sup −1} in the FTIR spectrum also supported the spinel phase purity of compound. The dielectric constant was found normal, but loss tangent of the sample showed abnormal behavior with frequency. The observed dielectric behavior of the synthesized product has been explained on the basis of space-charge polarization according to Maxwell–Wagner’s model and mutual contribution of n-type &p-type charge carriers (Rezlescu model). The ac conductivity linearly increased with frequency highlighting the existence of polaron hopping.

36 MATERIALS SCIENCE↗