Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Facile etching for single crystal cathode materials

A recycling and synthesis of charge material for secondary batteries generates single-crystal charge materials for producing batteries with greater charge cycle longevity. Charge material particles undergo a heating for fusing or enhancing grain boundaries between polycrystalline particles. The resulting, more well-defined grain boundaries are easily etched by a relatively weak mineral acid solution. The acid solution removes material at the grain boundaries to separate secondary particles into primary particles along the grain boundaries. The resulting single crystal (monocrystalline) charge material particles are washed and filtered, and typically re-sintered to accommodate any needed lithium (lithium carbonate), and result in a charge material with larger surface area, higher lithium diffusivity and lower cation ordering.

Wang, Yan↗

Vickers indentation hardness of stoichiometric and reduced single crystal TiO2 (rutile) from 25 to 800 C

The indentation microhardness of stoichiometric and reduced single crystal rutile (TiO2) from 25 to 800 C is presented in this paper. The results serve two main purposes. One is to assess the effect of rutile's stoichiometry on its hardness. The other is to test recently suggested theory on solid lubrication with sub Stoichiometric rutile in an effort to better understand shear controlled phenomenon. Microhardness was measured using a Vickers diamond indentor on both vacuum and hydrogen reduced single crystal rutile from 25 to 800 C. The results indicate that stoichiometry and temperature have a pronounced effect on rutile's hardness. The measured effects lend support to theory on solid lubrication by enhanced crystallographic slip and suggest that solid lubricant materials may be produced by careful atomic level tailoring (stoichiometry control).

Dellacorte, Christopher↗

Helical antiferromagnetic ordering in EuNi 1.95 As 2 single crystals

The Eu + 2 spins-7/2 in EuNi 2 As 2 with the body-centered tetragonal ThCr 2 Si 2 structure order antiferromagnetically below the Néel temperature T N = 15 K into a helical antiferromagnetic (AFM) structure with the helix axis aligned along the tetragonal c axis and the Eu ordered moments aligned ferromagnetically within the ab plane as previously reported from neutron diffraction measurements [T. Jin et al., Phys. Rev. B 99, 014425 (2019)]. Here we study the crystallographic, magnetic, thermal, and electronic transport properties of Bi-flux-grown single crystals using single-crystal x-ray diffraction, anisotropic magnetic susceptibility χ, isothermal magnetization M, heat capacity Cp, and electrical resistivity ρ measurements versus applied magnetic field H and temperature T. Vacancies are found on the Ni sites corresponding to the composition EuNi 1.95 (1) As 2. A good fit of the ρ (T) data by the Bloch-Grüneisen theory for metals was obtained. The χab (T) data below T N are fitted well by molecular field theory (MFT), and the helix turn angle kd and the Eu-Eu Heisenberg exchange constants are extracted from the fit parameters. The kd value is in good agreement with the neutron-diffraction result. The magnetic contribution to the zero-field heat capacity below T N is also fitted by MFT. The isothermal in-plane magnetization M ab exhibits two metamagnetic transitions versus H, whereas M c (T = 2 K ) is nearly linear up to H = 14 T, both behaviors being consistent with MFT. The M c (H, T) , ρ(H c , T) , and Cp (H c , T) data yielded a H c - T phase diagram separating the AFM and paramagnetic phases in good agreement with MFT. Anisotropic χ(T) literature data for the ThCr 2 Si 2 -type helical antiferromagnet EuRh 2 As 2 were also fitted well by MFT. A comparison is made between the crystallographic and magnetic properties of ThCr 2 Si 2 -type Eu M 2 Pn 2 compounds with M = Fe , Co, Ni, Cu, or Rh, and Pn = P or As, where only ferromagnetic and c -axis helical AFM structures are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biaxial constitutive equation development for single crystals

Current gas turbine engines utilize large single crystal superalloy components in the hot section. Structural analysis of these components requires a valid stress strain temperature constitutive equation. The goal of the program described is to create one or more models and verify these models. A constitutive equation based on an assumed slip behavior of a single slip system was formulated, programmed, and debugged. Specifically, the basic theory for a model based on aggravating slip behavior on individual slip systems was formulated and programmed and some simulations were run using assumed values of constants. In addition, a formulation allowing strain controlled simulations was completed. An approach to structural analysis of the specimen was developed. This approach uses long tube consistancy conditions and finite elements specially formulated to take advantage of the symmetry of 100 oriented specimens.

Jordan, E. H.↗

High quality single crystal Ge nano-membranes for opto-electronic integrated circuitry

A thin, flat, and single crystal germanium membrane would be an ideal platform on which to mount sensors or integrate photonic and electronic devices, using standard silicon processing technology. We present a fabrication technique compatible with integrated-circuit wafer scale processing to produce membranes of thickness between 60 nm and 800 nm, with large areas of up to 3.5 mm{sup 2}. We show how the optical properties change with thickness, including appearance of Fabry-Pérot type interference in thin membranes. The membranes have low Q-factors, which allow the platforms to counteract distortion during agitation and movement. Finally, we report on the physical characteristics showing sub-nm roughness and a homogenous strain profile throughout the freestanding layer, making the single crystal Ge membrane an excellent platform for further epitaxial growth or deposition of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thin Single Crystal Silicon Solar Cells on Ceramic Substrates: November 2009 - November 2010

In this program we have been developing a technology for fabricating thin (< 50 micrometres) single crystal silicon wafers on foreign substrates. We reverse the conventional approach of depositing or forming silicon on foreign substrates by depositing or forming thick (200 to 400 micrometres) ceramic materials on high quality single crystal silicon films~50 micrometres thick. Our key innovationis the fabrication of thin, refractory, and self-adhering 'handling layers or substrates' on thin epitaxial silicon films in-situ, from powder precursors obtained from low cost raw materials. This 'handling layer' has sufficient strength for device and module processing and fabrication. Successful production of full sized (125 mm X 125 mm) silicon on ceramic wafers with 50 micrometre thicksingle crystal silicon has been achieved and device process flow developed for solar cell fabrication. Impurity transfer from the ceramic to the silicon during the elevated temperature consolidation process has resulted in very low minority carrier lifetimes and resulting low cell efficiencies. Detailed analysis of minority carrier lifetime, metals analysis and device characterization have beendone. A full sized solar cell efficiency of 8% has been demonstrated.

14 SOLAR ENERGY↗

Properties of single crystal Fe{sub 1-x}Ga{sub x} thin films

Molecular beam epitaxy was used to deposit single crystal thin film Fe{sub 1-x}Ga{sub x} samples on ZnSe buffer layers grown on (001) and (110) single crystal GaAs substrates. The crystal quality of the GaAs surface and each deposited layer was monitored in situ by reflection high energy electron diffraction. The magnetic properties of the samples were characterized by vibrating sample magnetometry and ferromagnetic resonance (FMR). The FMR linewidth increases dramatically with Ga concentration while the cubic anisotropy term K{sub 1} switches sign.

36 MATERIALS SCIENCE↗

Effect of magnetic impurities on the vortex lattice properties in NbSe{sub 2} single crystals.

We report a pronounced peak effect in the magnetization of Co{sub x}NbSe{sub 2} single crystals with critical temperatures T{sub c} ranging between 7.1 and 5.0 K, and Mn{sub x}NbSe{sub 2} single crystals with critical temperatures down to 3.4 K. We correlate the peak effect in magnetization with the structure of the vortex lattice across the peak-effect region using scanning-tunneling microscopy. Magnetization measurements show that the amplitude of the peak effect in the case of Co{sub x}NbSe{sub 2} exhibits a nonmonotonic behavior as a function of the Co content, reaching a maximum for concentration of Co of about 0.4 at. % (corresponding to a T{sub c} of 5.7 K) and after that gradually decreasing in amplitude with the increase in the Co content. The normalized value of the peak position H{sub p}/H{sub c2} has weak dependence on Co concentration. In the case of Mn{sub x}NbSe{sub 2} the features of the peak effect as a function of the Mn content are different and they can be understood in terms of strong pinning.

36 MATERIALS SCIENCE↗

Single Mode Air-Clad Single Crystal Sapphire Optical Fiber

The observation of single mode propagation in an air-clad single crystal sapphire optical fiber at wavelengths at and above 783 nm is presented for the first time. A high-temperature wet acid etching method was used to reduce the diameter of a 10 cm length of commercially-sourced sapphire fiber from 125 micrometers to 6.5 micrometers, and far-field imaging provided modal information at intervals as the fiber diameter decreased. Modal volume was shown to decrease with decreasing diameter, and single mode behavior was observed at the minimum diameter achieved. While weakly-guiding approximations are generally inaccurate for low modal volume optical fiber with high core-cladding refractive index disparity, consistency between these approximations and experimental results was observed when the effective numerical aperture was measured and substituted for the theoretical numerical aperture in weakly-guiding approximation calculations. With the demonstration of very low modal volume in sapphire at fiber diameters much larger than anticipated by legacy calculations, the resolution of sapphire fiber distributed sensors may be increased and other sensing schemes requiring very low modal volume, such as fiber Bragg gratings, may be realized in extreme environment applications.

36 MATERIALS SCIENCE↗

The effect of substrate temperature and growth rate on the doping efficiency of single crystal boron doped diamond

The substrate growth temperature dependence of the plasma gas-phase to solid-phase doping efficiency in single crystal, boron doped diamond (BDD) deposition is investigated. Single crystal diamond (SCD) is grown by microwave plasma assisted chemical vapor deposition (MPACVD) on high pressure, high temperature (HPHT) type Ib substrates. Samples are grown at substrate temperatures of 850-950 degrees C for each of five doping concentration levels, to determine the effect of the growth temperature on the doping efficiency and defect morphology. The substrate temperature during growth is shown to have a significant effect on the grown sample defect morphology, and a temperature dependence of the doping efficiency is also shown. The effect of the growth rate on the doping efficiency is discussed, and the ratio of the boron concentration in the gas phase to the flux of carbon incorporated into the solid diamond phase is shown to be a more predictive measure of the resulting boron concentration than the gas phase boron to carbon ratio that is more commonly reported. (C) 2014 Elsevier B.V. All rights reserved.

Demlow, SN↗

Single-Crystal Sapphire Optical Fiber Sensor Instrumentation

This report summarizes technical progress on the program “Single-Crystal Sapphire Optical Fiber Sensor Instrumentation,” funded by the National Energy Technology Laboratory of the U.S. Department of Energy, and performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. This project was completed in three phases, each with a separate focus. Phase I of the program, from October 1999 to April 2002, was devoted to development of sensing schema for use in high temperature, harsh environments. Different sensing designs were proposed and tested in the laboratory. Phase II of the program, from April 2002 to April 2009, focused on bringing the sensor technologies, which had already been successfully demonstrated in the laboratory, to a level where the sensors could be deployed in harsh industrial environments and eventually become commercially viable through a series of field tests. Also, a new sensing scheme was developed and tested with numerous advantages over all previous ones in Phase II. Phase III of the program, September 2009 to December 2013, focused on development of the new sensing scheme for field testing in conjunction with materials engineering of the improved sensor packaging lifetimes. In Phase I, three different sensing principles were studied: sapphire air-gap extrinsic Fabry-Perot sensors; intensity-based polarimetric sensors; and broadband polarimetric sensors. Black body radiation tests and corrosion tests were also performed in this phase. The outcome of the first phase of this program was the selection of broadband polarimetric differential interferometry (BPDI) for further prototype instrumentation development. This approach is based on the measurement of the optical path difference (OPD) between two orthogonally polarized light beams in a single-crystal sapphire disk. At the beginning of Phase II, in June 2004, the BPDI sensor was tested at the Wabash River coal gasifier facility in Terre Haute, Indiana. Due to business conditions at industrial partner and several logistical problems, this field test was not successful. An alternative high-temperature sensing system using sapphire wafer-based extrinsic Fabry-Perot interferometry was then developed as a significant improvement over the BPDI solution. From June 2006 to June 2008, three consecutive field tests were performed with the new sapphire wafer sensors at the TECO coal gasifier in Tampa, Florida. One of the sensors survived in the industrial coal gasifier for 7 months, over which time the existing thermocouples were replaced twice. The outcome of these TECO field tests suggests that the sapphire wafer sensor has very good potential to be commercialized. However packaging and sensor protection issues need additional development. During Phase III, several major improvements in the design and fabrication process of the sensor have been achieved through experiments and theoretical analysis. Studies on the property of the key components in the sensor head, including the sapphire fiber and sapphire wafer, were also conducted, for a better understanding of the sensor behavior. A final design based on all knowledge and experience has been developed, free of any issues encountered during the entire research. Sensors with this design performed well as expected in lab long-term tests, and were deployed in the sensing probe of the final coal-gasifier field test. Sensor packaging and protection was improved through materials engineering through testing of packaging designs in two blank probe packaging tests at Eastman Chemical in Kingsport, TN. Performance analysis of the blank probe packaging resulted in improve package designs culminating in a 3rd generation probe packaging utilized for the full field test of the sapphire optical sensor and materials designed sensor packaging.

47 OTHER INSTRUMENTATION↗

Strong exciton-photon coupling in organic single crystal microcavity with high molecular orientation

Strong exciton-photon coupling has been observed in a highly oriented organic single crystal microcavity. This microcavity consists of a thiophene/phenylene co-oligomer (TPCO) single crystal laminated on a high-reflection distributed Bragg reflector. In the TPCO crystal, molecular transition dipole was strongly polarized along a certain horizontal directions with respect to the main crystal plane. This dipole polarization causes significantly large anisotropies in the exciton transition and optical constants. Especially the anisotropic exciton transition was found to provide the strong enhancement in the coupling with the cavity mode, which was demonstrated by a Rabi splitting energy as large as ∼100 meV even in the “half-vertical cavity surface emitting lasing” microcavity structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic structure of Sr{sub 2}Fe{sub 2}O{sub 5} brownmillerite by single-crystal Mössbauer spectroscopy

In order to determine orientation of the Fe{sup 3+} magnetic moments and electric field gradient (efg) axes in the brownmillerite-type strontium ferrite structure for both iron sublattices where the efg tensor is not axially symmetric, the Mössbauer spectra of powdered and oriented single-crystal Sr{sub 2}Fe{sub 2}O{sub 5} were analyzed by solving the complete Hamiltonian for hyperfine interactions in the excited and ground states of the {sup 57}Fe nuclei. The magnetic moments of both octahedrally and tetrahedrally coordinated iron cations lie on the ac-plane of the orthorhombic unit cell and are parallel to the shortest c-axis, whilst the main efg axes are parallel to the longest crystallographic axis, b. This orientation is similar to that in Ca{sub 2}Fe{sub 2}O{sub 5}, in spite of the structural differences of strontium and calcium ferrite brownmillerites at low temperatures. - Graphical abstract: Mössbauer spectra of powdered and oriented single-crystal Sr{sub 2}Fe{sub 2}O{sub 5}, analyzed by solving the complete Hamiltonian for hyperfine interactions in the excited and ground states of the {sup 57}Fe nuclei, show that the magnetic moments of both octahedrally and tetrahedrally coordinated iron cations are parallel to the shortest c-axis of the orthorhombic brownmillerite unit cell . Display Omitted - Highlights: • Single-crystal Mössbauer spectroscopy is used to study magnetic structure of Sr{sub 2}Fe{sub 2}O{sub 5}. • Complete Hamiltonian for hyperfine interactions in excited and ground states was solved. • Fe{sup 3+} magnetic moments are parallel to the shortest crystallographic axis c. • The orientation of nuclear electric field gradient is similar to that in Ca{sub 2}Fe{sub 2}O{sub 5}.

36 MATERIALS SCIENCE↗

Single crystal plasticity by modeling dislocation density rate behavior

The goal of this work is to formulate a constitutive model for the deformation of metals over a wide range of strain rates. Damage and failure of materials frequently occurs at a variety of deformation rates within the same sample. The present state of the art in single crystal constitutive models relies on thermally-activated models which are believed to become less reliable for problems exceeding strain rates of 10{sup 4} s{sup -1}. This talk presents work in which we extend the applicability of the single crystal model to the strain rate region where dislocation drag is believed to dominate. The elastic model includes effects from volumetric change and pressure sensitive moduli. The plastic model transitions from the low-rate thermally-activated regime to the high-rate drag dominated regime. The direct use of dislocation density as a state parameter gives a measurable physical mechanism to strain hardening. Dislocation densities are separated according to type and given a systematic set of interactions rates adaptable by type. The form of the constitutive model is motivated by previously published dislocation dynamics work which articulated important behaviors unique to high-rate response in fcc systems. The proposed material model incorporates thermal coupling. The hardening model tracks the varying dislocation population with respect to each slip plane and computes the slip resistance based on those values. Comparisons can be made between the responses of single crystals and polycrystals at a variety of strain rates. The material model is fit to copper.

36 MATERIALS SCIENCE↗