SEARCH · Engineering Papers

Results for “Shell effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Properties of r-modes in the sun

Global oscillations of the sun (r-modes) with very long periods of about 1 month are reviewed and studied. Such modes would be trapped in an acoustic cavity formed either by most of the convective envelope or by most of the radiative interior. A turning point frequency giving cavity boundaries is defined and the run of eigenvalues for angular harmonics l less than or equal to 3 are plotted for a conventional solar convection zone. The r-modes show equipartition of oscillatory energy among shells which each contain one antinode in the radial dimension. Toroidal motion is dominant to at least the 14th radial harmonic mode. Viscosity from convective turbulence is strong and would damp any mode in just a few solar rotations if it were the only significant nonadiabatic effect. 'Radial fine splitting' which lifts the degeneracy in n is very small (20 nHz or less) for all n less than or equal to 14 trapped in the envelope. But if splitting could be detected, there would be a valuable new constraint on solar convection theories.

Wolff, C. L.↗

NASA NTRS1991

Free vibrations of thin-walled semicircular graphite-epoxy composite frames

A detailed study is made of the effects of variations in lamination and material parameters of thin-walled composite frames on their vibrational characteristics. The structures considered are semicircular thin-walled frames with I and J sections. The flanges and webs of the frames are modeled by using two-dimensional shell and plate finite elements. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frame. The frequencies and modes predicted by the two-dimensional finite-element model are compared with those obtained from experiments, as well as with the predictions of a one-dimensional, thin-walled-beam, finite-element model. A detailed study is made of the sensitivity of the vibrational response to variations in the fiber orientation, material properties of the individual layers, and boundary conditions.

Noor, Ahmed K.↗

NASA NTRS1991

The energies and structure of X-ray K-absorption edges

Improved screening parameters are employed to compute the K threshold energies E(K) and photoelectric cross sections sigma(K) for the abundant atomic species of the interstellar gas. The E(K)-values for neutral C, N, and O differ from the values currently being employed in X-ray astronomy by several percent. The values are computed in an effective Coulomb field formulation, introducing an 'effective Coulomb' threshold, and convenient formulas are given for the extrapolation of the results to lower energies in the neighborhood of the real threshold energy. Within about 30-200 eV above threshold, the corrected cross sections display structure associated with direct secondary excitation of outer-shell electrons into the continuum. A unified description of this feature of the cross section is introduced, in terms of the secondary threshold energies and core relaxation factors. Both of these factors are computed with the improved screening parameters associated with the one-electron atomic states of the many-electron systems.

Gould, Robert J.↗

NASA NTRS1962

Elastic and Plastic Stability of Orthotropic Cylinders

By utilizing linear stability theory, solutions for elastic buckling of short and moderate length orthotropic cylinders under axial compression are presented and correlated with experimental results on circumferentially stiffened cylinders. The plastic buckling of short and moderate length isotropic and orthotropic cylinders is also investigated and the theoretical results correlated with available experimental data. A discussion of the effects of finite deflection and initial imperfection is presented in order to explain the correlation obtained between the theory and the experimental data.

ELASTIC BUCKLING↗

NASA NTRS1974

Design, fracture control, fabrication, and testing of pressurized space-vehicle structures

The relationship between analysis, design, fabrication, and testing of thin shells is illustrated by Saturn S-IVB, Thor, Delta, and other single-use and reusable large-size cryogenic aluminum tankage. The analyses and design to meet the design requirements are reviewed and include consideration of fracture control, general instability, and other failure modes. The effect of research and development testing on the structure is indicated. It is shown how fabrication and nondestructive and acceptance testing constrain the design. Finally, qualification testing is reviewed to illustrate the extent of testing used to develop the Saturn S-IVB.

Babel, H. W.↗

NASA NTRS1992

Coupled 2D-3D finite element method for analysis of a skin panel with a discontinuous stiffener

This paper describes a computationally efficient analysis method which was used to predict detailed stress states in a typical composite compression panel with a discontinuous hat stiffener. A global-local approach was used. The global model incorporated both 2D shell and 3D brick elements connected by newly developed transition elements. Most of the panel was modeled with 2D elements, while 3D elements were employed to model the stiffener flange and the adjacent skin. Both linear and geometrically nonlinear analyses were performed on the global model. The effect of geometric nonlinearity induced by the eccentric load path due to the discontinuous hat stiffener was significant. The local model used a fine mesh of 3D brick elements to model the region at the end of the stiffener. Boundary conditions of the local 3D model were obtained by spline interpolation of the nodal displacements from the global analysis. Detailed in-plane and through-the-thickness stresses were calculated in the flange-skin interface near the end of the stiffener.

Wang, J. T.↗

NASA NTRS1993

Stripping of a planetary nebula from the globular cluster M22

High-spatial resolution imaging in the O III lambda 5007 line of a planetary nebula (PN) in the globular cluster M22 reveals a strongly asymmetric (half-moon shaped) nebular morphology. We confirm that this peculiar morphology is caused by the distortion of stellar ejecta by the ram pressure of the ambient interstellar medium (ISM) through which the cluster is moving with a high velocity of 200 km/s. Emission knots visible in the leading (upstream) nebular section confirm theoretical expectations that the shell should have been fragmented by the Rayleigh-Taylor instability. Stripping of the PN from M22 by the ambient ISM is the first direct evidence for removal of gas from globular clusters. M22 is at a favorable location for the ram-pressure stripping to be effective, only 400 pc below the Galactic plane, well within a 2 kpc thick layer of ionized gas enveloping the plane. Ionized (or possibly neutral) gas in this layer, with a hydrogen density of about 0.1 cu/cm, is responsible for the observed interaction.

Borkowski, Kazimier J.↗

NASA NTRSDate not supplied

Using NASA Earth Observations to Identify Trends in Harmful Algal Blooms in Narragansett Bay

Narragansett Bay in Rhode Island is known for its quahog, or hard-shell clam, shellfisheries. However, increased levels in harmful algal blooms (HABs) have posed threats to quahog populations and raised public health concerns due to shellfishery closures resulting from contamination with neurotoxins released by phytoplankton. NASA DEVELOP partnered with the Environmental Protection Agency’s National Health and Environmental Effects Research Laboratory and Rhode Island’s Department of Environmental Management to use Earth observations and the partners’ in-situ data to visualize phytoplankton bloom events within the bay. The team used Sentinel-3 Ocean and Land Color Instrument (OLCI), Landsat 8 Operational Land Imager (OLI), and Landsat 9 OLI-2 to track proposed proxies for phytoplankton from June 2016 to October 2023. Multiple sensors and datasets were employed for more accurate results due to the small spatial extent of Narragansett Bay. Chlorophyll-a and total suspended solids were determined to be accurate parameters to monitor HAB events. Although complications could arise due to the relatively small size of the bay and small-scale of the bloom events, which may be difficult to visualize via remote sensing, Earth observations have proven to help strengthen HAB research, monitoring, and prediction and will complement the extensive in-situ data in Narragansett Bay.

Isabella Giordano↗

NASA NTRS2025

Large Impact Features on Ganymede and Callisto as Revealed By Geological Mapping and Morphometry

The icy Galilean satellites are host to a broad range of impact feature morphologies. Hypotheses seeking to explain the diversity of these impact features consider the effects of impact melt, the physical state of the subsurface at the time of impact, and the impactor characteristics. As part of a larger effort to assess the role of these factors in the formation and evolution of these impact features, we have performed topographic and geological mapping of 19 large impact features on Ganymede and Callisto. These are divided into two main morphological groups: craters (subdivided into pit, dome, and anomalous dome craters), and penepalimpsests/palimpsests. The transitions from pit, dome, to anomalous dome craters appear to be size-dependent up to diameters of ∼170 km. The morphologies of pit and dome craters appear to be independent of their age or geologic context. The impacts that formed them only affected a cold, rigid ice layer, with the development of pits and raised annuli on their floors possibly stemming from the evolution of a pocket of impact melt. The subdued rims and floors of anomalous dome craters indicate the increasing effect of a weak, warm ice layer on impact feature morphology with increasing size, but their prominent annuli and pits indicate that mobilization of impact melt is also a factor. The very low topographic relief of older penepalimpsests and palimpsests indicates that their impacts penetrated the ice shell to mobilize very large volumes of pre-existing liquid from a subsurface layer, with little contribution to the final feature morphology from impact melt. Penepalimpsests are distinguished from palimpsests by the higher frequency of concentric ridges within their interiors, indicating a generally more robust state of the subsurface that could better support the rotation and uplift of solid material during impact, even if a crater-like depression could not be supported. A few impact features seem to be transitional between anomalous dome craters and penepalimpsests, and the overlap of anomalous dome craters, penepalimpsests, and palimpsests in terms of diameter as well as age indicates that impactor size and subsurface properties over time are major factors in determining which of these morphologies emerges.

Oliver L White↗

NASA NTRS2018

Structural Certification of Human-Rated Inflatable Space Structures

This paper details the results of an initial study to develop a certification plan for human-rated inflatable space structures, including guidelines for qualification testing. Habitable softgoods inflatables are multi-layered shell structures that use high-strength webbing, cordage and broadcloth fabric to carry the skin loads of a variety of volumetric shapes and structural architectures. The primary objectives of this study are to define the key parameters that affect these structures and propose a statistically robust approach to defining safety and knockdown factors based on test and analysis. Current NASA standards for habitable inflatable space structures use a factor of safety of 4, which was inherited from airship design criteria. An updated approach to defining a design factor, taking into account material strength variability, load variability in the article, number of test samples, and damage and degradation effects is specified. Accurate analytical modeling of these structures is hindered by the difficulty of obtaining accurate and consistent material data due to load-history- dependent, nonlinear load versus strain behavior. A building block approach to certification is detailed that uses stochastic modeling and statistical test design and analysis to address the unique challenges these high-strength softgoods structures present. Human-rated inflatable modules are a transformative capability for launching much larger habitable volumes into space than is possible with rigid shell structures. This research aims to provide the framework for certifying these structures for future human space exploration missions.

Jones, Thomas C.↗

NASA NTRS1982

Orion's cloak as a model for supershells of gas around OB associations

Orion OB1 was the association most heavily observed by the Copernicus satellite UV spectrometer, which detected very unusual, strong interstellar UV absorption lines. Negative velocity gas at -100 km/sec was also noted, together with the absence of a corresponding, very high positive velocity feature. These and other characteristics have led to the present inferrence of a radially expanding, thin, uniform and low column density shell of fast moving gas which surrounds the Ori OB1 and Lambda Ori regions. Inside this shell is a more slowly moving inhomogeneous region of higher density gas which produces the more sporadically distributed gas at velocities in the 30-100 km/sec range. Within this framework, it is suggested that the most recent supernova is seen in the highest velocity gas, while the composite effects of the history of supernova formation lie in the denser, slower material.

Cowie, L. L.↗

NASA NTRS1990

On the disappearance of O I in some high-luminosity cool stars

Far UV spectra and flux measurements of cool giant and supergiant stars, focusing on the O I (UV 2) and S I/Si II fluxes and their dependence on stellar parameters are presented. The de-reddened O I surface fluxes vary by factors of several hundred over the 11 stars in the sample and, at a given luminosity, decrease with decreasing effective temperature. No flux at all is detected in the three M supergiants observed to date. In contrast, the S I/Si II blend near 1810 angstrom is clearly detected in all the stars. Its strength generally increases with luminosity, but has little effective temperature dependence. Possible explanations for the behavior of O I include changes in the intensities of Lyman alpha and beta which excite the lines of S I and O I, respectively, as well as scattering and/or absorption of the O I flux in a dense, circumstellar gas shell.

Carpenter, K. G.↗

NASA NTRS1994

Interlaminar stress analysis of dropped-ply laminated plates and shells by a mixed method

A mixed method of approximation based on Reissner's variational principle is developed for the linear analysis of interlaminar stresses in laminated composites, with special interest in laminates that contain terminated internal plies (dropped-ply laminates). Two models are derived, one for problems of generalized plane deformation and the other for the axisymmetric response of shells of revolution. A layerwise approach is taken in which the stress field is assumed with an explicit dependence on the thickness coordinate in each layer. The dependence of the stress field on the thickness coordinate is determined such that the three-dimensional equilibrium equations are satisfied by the approximation. The solution domain is reduced to one dimension by integration through the thickness. Continuity of tractions and displacements between layers is imposed. The governing two-point boundary value problem is composed of a system of both differential and algebraic equations (DAE's) and their associated boundary conditions. Careful evaluation of the system of DAE's was required to arrive at a form that allowed application of a one-step finite difference approximation. A two-stage Gauss implicit Runge-Kutta finite difference scheme was used for the solution because of its relatively high degree of accuracy. Patch tests of the two models revealed problems with solution accuracy for the axisymmetric model of a cylindrical shell loaded by internal pressure. Parametric studies of dropped-ply laminate characteristics and their influence on the interlaminar stresses were performed using the generalized plane deformation model. Eccentricity of the middle surface of the laminate through the ply drop-off was found to have a minimal effect on the interlaminar stresses under longitudinal compression, transverse tension, and in-plane shear. A second study found the stiffness change across the ply termination to have a much greater influence on the interlaminar stresses.

Harrison, Peter N.↗

NASA NTRS2012

Improving X-ray Optics Through Differential Deposition

The differential deposition technique can in theory correct shell figures to approximate arcsecond value. We have received APRA funding and are building two custom system to demonstrate the technique on full shell and segmented optics. We hope to be able to demonstrate < 5 arcsec performance in < 2 years. To go beyond this, (arcsecond level) is very difficult to judge as we have not yet discovered the problems. May necessitate in-situ metrology, stress reduction investigations, correcting for gravity effects, correcting for temperature effects. Some of this will become obvious in early parts of the investigation.

Ramsey, Brian↗

NASA NTRS1988

Spacecraft environmental anomalies expert system

A microcomputer-based expert system is being developed at the Aerospace Corporation Space Sciences Laboratory to assist in the diagnosis of satellite anomalies caused by the space environment. The expert system is designed to address anomalies caused by surface charging, bulk charging, single event effects and total radiation dose. These effects depend on the orbit of the satellite, the local environment (which is highly variable), the satellite exposure time and the hardness of the circuits and components of the satellite. The expert system is a rule-based system that uses the Texas Instruments Personal Consultant Plus expert system shell. The completed expert system knowledge base will include 150 to 200 rules, as well as a spacecraft attributes database, an historical spacecraft anomalies database, and a space environment database which is updated in near real-time. Currently, the expert system is undergoing development and testing within the Aerospace Corporation Space Sciences Laboratory.

Koons, H. C.↗

NASA NTRS1992

L-shell X-ray opacity of many-electron atoms

The study presents a formulation for obtaining the L-shell photoelectric cross section (sigma sub L) for many-electron atomic systems. A scaling law is suggested for the evaluation of the contribution to sigma sub L from 2s and 2p ejection from a general system in any ionization state. The formula is expressed in terms of the effective nuclear charge (Z sub 2s and Z sub 2p) seen by the corresponding bound electrons, with Z sub 2s and Z sub 2p, obtained from improved screening constants derived in a recent investigation. A comparison is made of Hartree-Fock and hydrogenic expressions for sigma sub L with experimental results for atomic neon at X-ray photon energies, providing the basis for the scaling law and an approximate energy dependence for the cross sections. The special case of sigma sub L for atomic Fe is considered in detail. This L edge has structure because of the different threshold for 2s and 2p photoejection; the latter has fine structure.

Jung, Young-Dae↗

NASA NTRS1994

Observations of ultraviolet-bright stars in globular clusters with the Hopkins Ultraviolet Telescope

Two UV-bright stars in globular clusters, UV5 in NGC 1851 and vZ 1128 in M3, were observed with the Hopkins Ultraviolet Telescope (HUT) during the Astro-1 space shuttle mission in 1990 December. The stars' spectra show weak absorption features and no significant emission features other than well known geocoronal lines. Detailed fitting of Kurucz (1991) stellar atmosphere models using a chi(sup 2) minimization technique indicates T(sub eff) = 16 000 K, log g = 2.5, and abundance (-1.0) (logarithm of abundance of elements heavier than helium relative to solar) for UV5, and T(sub eff) = 35 000 K, log g = 4.0, and abundance (-3.5) for vZ 1128. The Kurucz model which best fits vZ 1128 overpredicts the flux in the region below approximately 1000 A, an effect seen in previous models of O-type stars. Our results are robust (to within approximately 1000 K) with respect to uncertainties in interstellar reddening and atomic and molecular hydrogen column densities. We do not see significant molecular hydrogen absorption, which might have indicated material in a circumstellar shell, in either star's spectrum. We estimate the stellar luminosities to be log L/solar luminosity = 3.33 +/- 0.15 for UV5 and log L/solar luminosity = 3.21 +/- 0.12 for vZ 1128. These atmospheric parameters place both stars on the Schoenberner (post-AGB) tracks, though the stellar masses derived from the best-fitting Kurucz models are somewhat less than those predicted by the Schoenberner models. Examination of individual absorption line strengths reveals no significant abundance anomalies in either star.

Van Dyke Dixon, W.↗

NASA NTRS1994

Centrifugal acceleration of the polar wind

The effect of parallel ion acceleration associated with convection was first applied to energization of test particle polar ions by Cladis (1986). However, this effect is typically neglected in 'self-consistent' models of polar plasma outflow, apart from the fluid simulation by Swift (1990). Here we include approximations for this acceleration, which we broadly characterize as centrifugal in nature, in our time-dependent, semikinetic model of polar plasma outflow and describe the effects on the bulk parameter profiles and distribution functions of H+ and O+. For meridional convection across the pole the approximate parallel force along a polar magnetic field line may be written as F(sub cent, pole) = 1.5m(E(sub i))/B(sub i))squared (r(squared)/r(sup 3)(sub i)) where m is ion mass, r is geometric distance; and E(sub i), B(sub i) and r(sub i) refer to the electric and magnetic field magnitudes and geocentric distance at the ionosphere, respectively. For purely longitudinal convection along a constant L shell the parallel force is F(cent. long) = F(sub cent, pole)(1 - (r/(r(sub i)L))(sup 3/2)/(1 - 3r/(4 r(sub i)L))(sup 5/2). For high latitudes the difference between these two cases is relatively unimportant below approximately 5 R(sub E). We find that the steady state O+ bulk velocities and parallel temperatures strongly increase and decrease, respectively, with convection strength. In particular, the bulk velocities increase from near 0 km/s at 4000 km altitude to approximately 10 km/s at 5 R(sub E) geocentric distance for 50-mV/m ionospheric convection electric field. However, the centrifugal effect on the steady O+ density profiles depends on the exobase ion and electron temperatures: for low-base temperatures (T(sub i) = T(sub e) = 3000 K) the O+ density at high altitudes increases greatly with convection, while for higher base temperatures (T(sub i) = 5000 K, T(sub e) = 9000 K), the high-altitude O+ density decreases somewhat as convection is enhanced. The centrifugal force further has a pronounced effect on the escaping O+ flux, especially for cool exobase conditions; as referenced to the 4000-km altitude, the steady state O+ flux increases from 10(exp 5) ions/sq cm/s when the ionospheric convection field E(sub i) = 0 mV/m to approximately 10(exp 7) ions/sq cm/s when E(sub i) = 100 mV/m. The centrifugal effect also decreases the time scale for approach to steady-state. For example, in the plasma expansion for T(sub i) = T(sub e) = 3000 K, the O+ density at 7 R(sub E) reaches only 10(exp -7) of it final value approximately 1.5 hours after expansion onset for E(sub i) = 0. For meridional convection driven by E(sub i) = 50 mV/m, the density at the same time after initial injection is 30-50% of its asymptotic level. The centrifugal acceleration described here is a possible explanation for the large (up to approximately 10 km/s or more) o+ outflow velocities observed in the midlatitude polar magnetosphere with the Dynamics Explorer 1 and Akebono spacecraft.

Horwitz, J. L.↗