SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sampling techniques used to construct large area crop estimates are briefly reviewed. Problem areas in sampling and aggregation are covered. The natural sampling strategy, two phase sampling, weighted aggregation, and multiyear estimation are among the topics discussed.
A technique is described for the measurement of the thermal conductivity of lunar core samples. According to their technique, the core sample is heated radiatively from the outside at a known rate, the temperature is measured at the surface of the core-tube, and the thermal conductivity of the sample is determined by comparing the measured temperature with the theory. The corresponding problems for a composite slab or sphere were solved and the solutions are presented for possible future application to the thermal conductivity measurements. The experimental apparatus construction and procedure are examined as well as the number of precautions taken to preserve the sample from disturbances and to improve the measurement results.
A single-heating procedure for the determination of two partially independent values of paleofield intensity for one sample is presented. The procedure combines data for Shaw-type and 'ARM-method' determinations furnishing the ratio thermoremanent magnetization (TRM) to ARM acquisition efficiency corrected for physicochemical alteration to the magnetic carriers. Applicability of the Shaw-method to Fe-bearing samples is demonstrated by simulated paleointensity determinations on synthetic samples containing multidomain grains. The combined Shaw-ARM procedure was applied to a linear basalt sample, but the Thellier-Thellier method could not provide a meaningful determination of the neighboring chip. These conflicting findings may be explained by multiple step-wise heatings causing more damage to carriers than a single heating procedure, and by the natural remanent magnetization in this lunar basalt not being a simple TRM.
Methods are derived for applying the V/Vmax variable when several complete samples are analyzed simultaneously. A new, related, variable, V(e)/V(a), which is superior to V/Vmax when sufficient observational data are available, is introduced. It is shown how statistically independent complete samples can be generated from partially overlapping samples such that each observed object appears only once in the analysis. These methods make it possible to combine the information from different complete samples, and to make an efficient use of all available data. Illustrative examples for quasars are given. It is shown how the generalized V/Vmax and V(e)/V(a) can be used to find the amount of cosmological evolution of quasars and its associated range of uncertainty.
The potential false-lock problem associated with the sampled data type of Costas loop implementation is addressed in this paper. The term 'alias lock' is used here to differentiate this type of false lock behavior from the data sideband false lock behavior of analog Costas loops. It is shown that the sampled-data version of the conventional Costas loop, sampled at a rate 1/T(s), can alias lock at frequencies that are multiples of 1/2T(s) away from the carrier frequency. It is also shown that the alias lock problem of the sampled data version of the Costas loop with hard-limited in-phase channel is further compounded by the potential occurrence of false lock frequencies at rational multiples of 1/2T(s) away from the carrier. The false lock S-curves of I-Q loops and decision-directed I-Q loops are investigated in detail, with and without additive noise. Close agreement between theory and earlier experimental results is also demonstrated.
High resolution incoherent mapping of the sampling volume was performed to determine the three dimensional profile of the volume of the beam from which information can be obtained by scattering. The incoherent sampling volume of the infrared laser Doppler velocimeter was found to be heavily dependent upon the configuration of the outgoing laser beam. In general when only half the beam is allowed to focus at the focal plane, the x, y traverses indicate a broader beam with nominal side lobes. However, if the total beam is permitted to impinge on the focal plane there is substantial narrowing of the beam with increased maximum intensity and an increase in side lobes. The double maximum indicated by the coherent sampling volume appears to be an artifact of the scanning process not a fundamental entity of the sampling volume.
Two one liter grab samples of stratospheric aerosol were returned from each of six U-2 sampling missions. Cloud condensation nuclei (CCN) spectra from each sample were obtained. Interest was centered on the effects of volcanic activity. Spurious particle generation was found to be a serious problem in container 9 LFT and a much smaller problem in container 9 RT. Initial studies of an option for improved sample containers and values were completed. A CCN spectrometer, able to operate at an internal pressure of 300 mb, was designed.
The idea behind the use of rotation sample designs is that the variation of the crop acreage of a particular sample unit from year to year is usually less than the variation of crop acreage between units within a particular year. The estimation theory is based on an additive mixed analysis of variance model with years as fixed effects, (a sub t), and sample units as a variable factor. The rotation patterns are decided upon according to: (1) the number of sample units in the design each year; (2) the number of units retained in the following years; and (3) the number of years to complete the rotation pattern. Different analytic formulae for the variance of (a sub t) and the variance comparisons in using a complete survey of the rotation patterns.
The selection of sample segments in the U.S. foreign similarity regions for development of proportion estimation procedures and error modeling for Argentina, Australia, Brazil, and USSR in AgRISTARS is described. Each sample was chosen to be similar in crop mix to the corresponding indicator region sample. Data sets, methods of selection, and resulting samples are discussed.
Double sampling techniques employing LANDSAT data for estimating the acreage of corn and soybeans was investigated and evaluated. The evaluation was based on estimated costs and correlations between two existing procedures having differing cost/variance characteristics, and included consideration of their individual merits when coupled with a fictional 'perfect' procedure of zero bias and variance. Two features of the analysis are: (1) the simultaneous estimation of two or more crops; and (2) the imposition of linear cost constraints among two or more types of resource. A reasonably realistic operational scenario was postulated. The costs were estimated from current experience with the measurement procedures involved, and the correlations were estimated from a set of 39 LACIE-type sample segments located in the U.S. Corn Belt. For a fixed variance of the estimate, double sampling with the two existing LANDSAT measurement procedures can result in a 25% or 50% cost reduction. Double sampling which included the fictional perfect procedure results in a more cost effective combination when it is used with the lower cost/higher variance representative of the existing procedures.
A hemispherical focusing radiator has been employed to generate ultrahigh intensity sound waves in a gaseous medium at the center of curvature of the radiator (focal point) at 75, 107, and 163 kHz. A volumetric force is produced by optimally placing a reflector in the vicinity of the focal point to levitate samples of submillimeter sizes. It has been demonstrated that a sample with a specific gravity of 19.3 can be levitated with this apparatus. The lateral positional wandering of the sample in the force well is estimated at less than 5% of the dimension of the sample size used.
Empirical Orthogonal Functions (EOF's), eigenvectors of the spatial cross-covariance matrix of a meteorological field, are reviewed with special attention given to the necessary weighting factors for gridded data and the sampling errors incurred when too small a sample is available. The geographical shape of an EOF shows large intersample variability when its associated eigenvalue is 'close' to a neighboring one. A rule of thumb indicating when an EOF is likely to be subject to large sampling fluctuations is presented. An explicit example, based on the statistics of the 500 mb geopotential height field, displays large intersample variability in the EOF's for sample sizes of a few hundred independent realizations, a size seldom exceeded by meteorological data sets.
Airborne solids concentrations were measured on a near daily basis at two Hanford, Washington sites after the eruption of Mount St. Helens on May 18, 1980. These sites are about 211 km east of Mount St. Helens. Collected airborne solids included resuspended volcanic ash plus normal ambient solids. Average airborne solids concentrations were greater at the Hanford meteorological station sampling site which is 24 km northwest of the Horn Rapids dam sampling site. These increased concentrations reflect the sampling site proximity to greater ash fallout depths. Both sites are in low ash fallout areas although the Hanford meteorological station site is closer to the greater ash fallout areas. Airborne solids concentrations were decreased by rain, but airborne solids concentrations rapidly increased as surfaces dried. Airborne concentrations tended to become nearly the same at both sampling sites only for July 12 and 13.
A two phase sampling method and the optimal sampling segment dimensions for the estimation of sugar cane cultivated area were developed. This technique employs visual interpretations of LANDSAT images and panchromatic aerial photographs considered as the ground truth. The estimates, as a mean value of 100 simulated samples, represent 99.3% of the true value with a CV of approximately 1%; the relative efficiency of the two phase design was 157% when compared with a one phase aerial photographs sample.
Many visual displays, such as movies and television, rely upon sampling in the time domain. The spatiotemporal frequency spectra for some simple moving images are derived and illustrations of how these spectra are altered by sampling in the time domain are provided. A simple model of the human perceiver which predicts the critical sample rate required to render sampled and continuous moving images indistinguishable is constructed. The rate is shown to depend upon the spatial and temporal acuity of the observer, and upon the velocity and spatial frequency content of the image. Several predictions of this model are tested and confirmed. The model is offered as an explanation of many of the phenomena known as apparent motion. Finally, the implications of the model for computer-generated imagery are discussed.
A design is presented for an earth-orbiting facility for the analysis of planetary return samples under conditions of maximum protection against contamination but minimal damage to the sample. The design is keyed to a Mars sample return mission profile, returning 1 kg of documented subsamples, to be analyzed in low earth orbit by a small crew aided by automated procedures, tissue culture and microassay. The facility itself would consist of Spacelab shells, formed into five modules of different sizes with purposes of power supply, habitation, supplies and waste storage, the linking of the facility, and both quarantine and investigation of the samples. Three barriers are envisioned to protect the biosphere from any putative extraterrestrial organisms: sealed biological containment cabinets within the Laboratory Module, the Laboratory Module itself, and the conditions of space surrounding the facility.
A protocol is presented for the analysis at an earth-orbiting quarantine facility of return samples of extraterrestrial material that might contain (nonterrestrial) life forms. The protocol consists of a series of tests designed to determine whether the sample, conceptualized as a 1-kg sample of Martian soil, is free from nonterrestrial biologically active agents and so may safely be sent to a terrestrial containment facility, or it exhibits biological activity requiring further (second-order) testing outside the biosphere. The first-order testing procedure seeks to detect the presence of any replicating organisms or toxic substances through a series of experiments including gas sampling, analysis of radioactivity, stereomicroscopic inspection, chemical analysis, microscopic examination, the search for metabolic products under growth conditions, microbiologicl assays, and the challenge of cultured cells with any agents found or with the extraterrestrial material as is. Detailed plans for the second-order testing would be developed in response to the actual data received from primary testing.
Abundances of thirty-five elements were determined in two bulk samples and a white clast in the Allan Hills A81005 meteorite. High siderophile element content indicates that the sample is a regolith breccia. An Fe/Mn ratio of 77 in this meteorite eliminates parent bodies of known differentiated meteorites as the source of ALHA 81005. The incompatible elements are very similar to those found in most lunar highlands rocks, and provide very strong evidence that the sample is lunar in origin. The clast sample has the trace element pattern of a lunar anorthosite and is very low in KREEP and siderophile elements. It may be a fragment of a pristine lunar rock.