Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Carbon molecular sieve membranes for CO 2 /N 2 separations: Evaluating subambient temperature performance

Flue gas CO 2 capture has gained significant attention in recent years to mitigate the environmental impact of greenhouse gases. In spite of excellent performance by polymer membranes, there is still a need for more robust membranes to exceed the polymer upper bound at subambient temperatures, and carbon molecular sieve (CMS) membranes could offer a potential solution. In the present study, as a proof of concept, CMS hollow fiber membranes derived from defect-free 6FDA/BPDA-DAM polymer precursors at a pyrolysis temperature of 550°C were investigated for CO 2 /N 2 separation. Both ambient (35°C) and subambient (-20°C) temperature performance for these CMS membranes have been studied using a combination of pressure decay sorption and permeation techniques. Permeation findings using CO 2 /N 2 (20:80) mixed gas CMS showed CO 2 /N 2 selectivity of ~109 and CO 2 permeance of ~107 GPU at -20°C. Most interestingly, a decrease of only ~33% in CO 2 permeance with a large increase in CO 2 /N 2 selectivity (~4.5 times) was observed for CMS membranes on decreasing temperature from 35°C to -20°C. Gas sorption measurements indicated that the Langmuir hole filling capacity (C’ H ) for CO 2 is very high compared to N 2 at both ambient and subambient temperatures. This trend was attributed to higher sorbed density of CO 2 at saturation in the micropores due to its transition from gas phase to the liquid phase at subambient temperatures. Significant increases in sorption selectivity as well as diffusion selectivity for CO 2 /N 2 going from ambient to subambient temperatures make CMS membranes a possible substitute for polymer membranes for CO 2 /N 2 separation.

36 MATERIALS SCIENCE↗

Rapid Assessment of the Physical Stability of Amorphous Solid Dispersions

Amorphous solid dispersions (ASDs) can potentially increase the apparent solubility and thereby the oral bioavailability of poorly soluble compounds. Furthermore, their physical instability, i.e., potential to crystallize, is a major concern. Our objective was to explore methods for rapid assessment of the physical stability of ASDs. Ketoconazole ASDs were prepared with each of the three polymers, poly(acrylic acid) (PAA), poly(2-hydroxyethyl methacrylate) (PHEMA), and polyvinylpyrrolidone (PVP). The physical stability of these ASDs was evaluated after exposure to 90% RH (25 °C) in an automated water sorption analyzer. The onset time for ketoconazole crystallization, induced by water sorption, was rank ordered as PAA > PHEMA > PVP. Additionally, the ability of the polymers to inhibit crystallization on contact with aqueous medium was studied by powder X-ray diffractometry using synchrotron radiation. In this case, the rank ordering was PAA ~ PHEMA > PVP. To check the validity of our approach, the long-term stability of ketoconazole in ASDs was evaluated in the glassy state, both at 25 and at 40 °C, and was rank ordered as PAA > PHEMA > PVP. Crystallization, accelerated by water vapor sorption, can serve as an effective preliminary screening tool to rapidly evaluate and rank order the physical stability of ASDs.

60 APPLIED LIFE SCIENCES↗

Impacts of Forest Fire Ash on Aquatic Mercury Cycling

Mercury (Hg) is a ubiquitous contaminant in the environment and its methylated form, methylmercury (MeHg), poses a worldwide health concern for humans and wildlife, primarily through fish consumption. Global production of forest fire ash, derived from wildfires and prescribed burns, is rapidly increasing due to a warming climate, but their interactions with aqueous and sedimentary Hg are poorly understood. In this study, we compared the differences of wildfire ash with activated carbon and biochar on the sorption of aqueous inorganic Hg and sedimentary Hg methylation. Sorption of aqueous inorganic Hg was greatest for wildfire ash materials (up to 0.21 μg g ₋1 or 2.2 μg g ₋1 C) among all of the solid sorbents evaluated. A similar Hg adsorption mechanism for activated carbon, biochar made of walnut, and wildfire ash was found that involves the formation of complexes between Hg and oxygen-containing functional groups, especially the ₋COO group. Notably, increasing dissolved organic matter from 2.4 to 70 mg C L ₋1 remarkably reduced Hg sorption (up to 40% reduction) and increased the time required to reach Hg–sorbent pseudo-equilibrium. Surprisingly, biochar and wildfire ash, but not activated carbon, stimulated MeHg production during anoxic sediment incubation, possibly due to the release of labile organic matter. Overall, our study indicates that while wildfire ash can sequester aqueous Hg, the leaching of its labile organic matter may promote production of toxic MeHg in anoxic sediments, which has an important implication for potential MeHg contamination in downstream aquatic ecosystems after wildfires.

54 ENVIRONMENTAL SCIENCES↗

Simultaneous Adsorption and Incorporation of Sr 2+ at the Barite (001)–Water Interface

Ionically-bonded minerals are ubiquitous and play a determinative role in controlling the mobility of toxic metals in natural environments. However, little is known about the mechanism of ion uptake by these mineral surfaces. In this study, the sorption of strontium ions (Sr 2+ ) to the barite (001) – water interface was studied using a combination of synchrotron x-ray scattering and three types of computational simulations (density functional theory, classical molecular dynamics (CMD), and CMD-metadynamics). In situ resonant anomalous X-ray reflectivity (RAXR) revealed that Sr 2+ adsorbed on the barite surface as inner-sphere surface complexes and was incorporated within the outermost barite atomic layers. Density functional theory combined with classical molecular dynamics simulations confirmed the thermodynamic stability of these species, demonstrating almost equal magnitudes in the free energy of sorption between these species. Metadynamics simulations showed a more detailed feature in the free energy landscape for metal adsorption where adsorbed Sr 2+ are stabilized in as many as four distinct inner-sphere sites and additional outer-sphere sites that are more diffuse and less energetically favorable than the inner-sphere sites. Additionally, the energy barriers among those inner-sphere sites were significantly lower compared with those for constituent cation Ba 2+ , implying fast exchange among adsorbed Sr 2+ species. The Sr 2+ uptake measured by RAXR followed a Frumkin isotherm defined with an apparent free energy of sorption, Δ≈ G Sr -22 kJ/mol, and an effective attractive interaction constant, γ ≈ -4.5 kJ/mol, between sorbed Sr 2+ . While the observed free energy can be mostly explained by the Helmholtz free energy of adsorption for Sr 2+ , ΔF Sr = -15.3 kJ/mol, the origin of the sorbate – sorbate correlation could not be fully described by our computational work. Together, these experimental and computational results demonstrate the complexity of Sr 2+ adsorption behavior at the barite (001) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective removal of copper (II) from natural waters by nanoporous sorbents functionalized with chelating diamines

The essential trace metal copper has been identified as a pollutant of concern by the Environmental Protection Agency (EPA) because of its widespread occurrence in the environment, often being found in concentrations capable of causing problems in organisms in that ecosystem. In this work, three different nanoporous sorbents containing chelating diamine functionalities were evaluated for Cu2+ adsorption in natural waters; these sorbents are ethylenediamine functionalized self-assembled monolayers on mesoporous supports (EDA-SAMMS®, SAMMS is a registered trademark of Steward Advanced Materials), ethylenediamine functionalized activated carbon (AC-CH2-EDA), and 1,10-Phenanthroline functionalized mesoporous carbon (Phen-FMC). The pH dependence of Cu2+ sorption and the Cu2+ sorption capacities of sorbents were determined. The Cu2+ adsorption rates and metal ion selectivity of these sorbents were compared to those of commercial sorbents (Chelex-100 ion exchange resin and Darco KB-B activated carbon). All three chelating diamine sorbents showed the excellent Cu2+ removal (~ 95-99%) from river water and sea water over the pH range of 6.0-8.0. Even under acidic conditions (e.g. pH of 3), AC-CH2-EDA and Phen-FMC were able to remove approximately ~49-58% of Cu2+ in sea water. EDA-SAMMS and AC-CH2-EDA demonstrated rapid Cu2+ sorption kinetics (reaching equilibrium within 5 min) and large adsorption capacities (26 and 17 mg Cu/g sorbent, respectively) in sea water. They also showed good selectivity for Cu2+ over other metal ions (e.g. Ca2+, Fe2+, Ni2+, and Zn2+) in sea water.

54 ENVIRONMENTAL SCIENCES↗

Contribution of Extracellular Polymeric Substances from Shewanella sp. HRCR-1 Biofilms to U(VI) Immobilization

The goal of this study was to quantify the contribution of extracellular polymeric substances (EPS) in U(VI) immobilization by Shewanella sp. HRCR-1. Through comparison of U(VI) immobilization using cells with bound EPS (bEPS) and cells without EPS, we showed that i) bEPS from Shewanella sp. HRCR-1 biofilms contributed significantly to U(VI) immobilization, especially at low initial U(VI) concentrations, through both sorption and reduction; ii) bEPS could be considered as a functional extension of the cells for U(VI) immobilization and they likely play more important roles at initial U(VI) concentrations; and iii) U(VI) reduction efficiency was found to be dependent upon initial U(VI) concentration and the efficiency decreased at lower concentrations. To quantify relative contribution of sorption and reduction in U(VI) immobilization by EPS fractions, we isolated loosely associated EPS (laEPS) and bEPS from Shewanella sp. HRCR-1 biofilms grown in a hollow fiber membrane biofilm reactor and tested their reactivity with U(V). We found that, when in reduced form, the isolated cell-free EPS fractions could reduce U(VI). Polysaccharides in the EPS likely contributed to U(VI) sorption and dominated reactivity of laEPS while redox active components (e.g., outer membrane c-type cytochromes), especially in bEPS, might facilitate U(VI) reduction.

59 BASIC BIOLOGICAL SCIENCES↗

Phosphate Bonding on Non-crystalline Al/Fe-hydroxide Co-Precipitates

Poorly crystalline minerals have high sorption capacities for environmentally important chemical species, but molecular-level mechanisms of sorption on complex mineral assemblages remain largely unknown. We determined the distribution of orthophosphate (PO{sub 4}) bonding between Al and Fe in relation to structural properties of Al/Fe-hydroxide coprecipitates. Phosphate was sorbed at concentrations between 0.042 and 0.162 mol P mol{sup -1} Al+Fe on coprecipitates containing 0, 20, 50, 75, or 100 mol % of metal as Al. Phosphorus XANES analyses showed preferential bonding of PO{sub 4} for Al on coprecipitates with 20 and 50 mol % Al, and no preference for either metal at 75 mol % Al, consistent with X-ray photoelectron spectroscopy (XPS) analyses of near-surface metal distributions. Structural ordering and the Fe-hydroxide domain size in coprecipitates decreased with increasing Al proportion, as shown by X-ray diffraction (XRD) and Fe EXAFS analyses. Structural interactions in coprecipitates imparted unique PO{sub 4} sorption properties compared with isolated Al- or Fe-hydroxide.

54 ENVIRONMENTAL SCIENCES↗

Surface Complexation of Neptunium(V) onto Whole Cells and Cell Components of Shewanella alga: Modeling and Experimental Study

We systematically quantified surface complexation of Np(V) onto whole cells, cell wall, and extracellular polymeric substances (EPS) of Shewanella alga strain BrY. We first performed acid and base titrations and used the mathematical model FITEQL to estimate the concentrations and deprotonation constants of specific surface functional groups. Deprotonation constants most likely corresponded to a carboxyl group not associated with amino acids (pK{sub a} {approx} 5), a phosphoryl site (pK{sub a} {approx} 7.2), and an amine site (pK{sub a} > 10). We then carried out batch sorption experiments with Np(V) and each of the S. alga components as a function of pH. Since significant Np(V) sorption was observed on S. alga whole cells and its components in the pH range 2-5, we assumed the existence of a fourth site: a low-pK{sub a} carboxyl site (pK{sub a} {approx} 2.4) that is associated with amino acids. We used the SPECIATE submodel of the biogeochemical model CCBATCH to compute the stability constants for Np(V) complexation to each surface functional group. The stability constants were similar for each functional group on S. alga bacterial whole cells, cell walls, and EPS, and they explain the complicated sorption patterns when they are combined with the aqueous-phase speciation of Np(V). For pH < 8, the aquo NpO{sub 2}{sup +} species was the dominant form of Np(V), and its log K values for the low-pK{sub a} carboxyl, mid-pK{sub a} carboxyl, and phosphoryl groups were 1.8, 1.8, and 2.5-3.1, respectively. For pH greater than 8, the key surface ligand was amine > XNH{sub 3}{sup +}, which complexed with NpO{sub 2}(CO{sub 3}){sub 3}{sup 5-}. The log K for NpO{sub 2}(CO{sub 3}){sub 3}{sup 5-} complexed onto the amine groups was 3.1-3.9. All of the log K values are similar to those of Np(V) complexes with aqueous carboxyl and N-containing carboxyl ligands. These results help quantify the role of surface complexation in defining actinide-microbiological interactions in the subsurface.

54 ENVIRONMENTAL SCIENCES↗

Pressure-induced amorphization and porosity modification in a metal-organic framework.

The impact of modest, industrially accessible pressures (0-1.2 GPa) on the structure and porosity of the zeolitic imidazolate framework Zn(2-methylimidazole){sub 2}, ZIF-8, was investigated using in situ powder X-ray diffraction in combination with sorption measurements for pressure-treated samples. The framework is highly compressible, with a bulk modulus (K = -V {partial_derivative}P/{partial_derivative}V) of 6.52(35) GPa, the most compressible metal-organic framework (MOF) documented to date. The framework undergoes an irreversible pressure-induced amorphization following compression beyond 0.34 GPa. The pressure-amorphized ZIF-8 remains porous, although the sorption characteristics are distinctly altered compared to the pristine material. As such, pressure can provide a new route to systematically modify the sorption behavior and other functional properties of MOFs, a nontraditional form of postsynthetic modification. Importantly, pressure modification of MOFs is effective at lower pressures than in other porous materials (e.g., zeolites) and, as such, is easily scalable and industrially relevant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular mechanism of gas adsorption into ionic liquids: A molecular dynamics study

Room temperature ionic liquids (RTILs) have been shown to be versatile and tunable solvents that can be used in many chemical applications. In this study, we developed a dynamical, molecular-scale picture of the gas dissolution and interfacial processes in RTILs using molecular simulations. These simulations can provide the free energies associated with transporting a gas solute across various RTIL interfaces and physical insights into the interfacial properties and transport molecular mechanism of gas sorption processes. For CO2 sorption, the features in the potential of mean force (PMF) of CO2 using both polarizable and non-polarizable force fields are similar qualitatively. However, we observed some quantitative differences, and we describe the causes of these differences in this paper. We also show the significant impact of ionic-liquid chemical structures on the gas sorption process, and we discuss their influence on the H2O transport mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-dependent mechanical properties of Mg nanoparticles used for hydrogen storage

Magnesium (Mg) hydride is a promising hydrogen storage material, yet its application has been limited by the slow hydrogen sorption kinetics. Recently, Mg nanoparticles have shown significant improvement of hydrogen storage properties in terms of dimensional stability upon cycling with the trend that the smaller the particle, the better the sorption kinetics. Since the volume change during sorption generates stress, leading to plastic deformation, the fundamentals of the mechanical deformation of the Mg particles are a significant issue. By using in situ transmission electron microscope compression tests and atomistic simulations on Mg nanoparticles, it was observed that deformation in the larger particles was dominated by the nucleation of 〈a〉-type dislocations from stress concentrations at the contact surface, while the smaller particles deformed more homogeneously with greater distribution of multiple types of dislocation sources. Importantly, this improvement of plastic deformation with decrease in size is orientation-independent. First-principles calculations suggest that this improved plasticity can be explained by the nearly-isotropic ideal shear strength for Mg, which becomes more important in smaller nanoparticles. As a result, the smaller Mg nanoparticles demonstrated better plastic stability to accommodate volume change upon hydrogen storage cycling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of Exfoliated Graphite Modified with Magnesium Ferrite

A magnetic sorbent based on exfoliated graphite modified with magnesium ferrite has been prepared by impregnating oxidized graphite in a mixed solution of FeCl{sub 3} and Mg(NO{sub 3}){sub 2}, followed by heat treatment of the impregnated oxidized graphite in air. X-ray diffraction and Mössbauer spectroscopy results demonstrate that the structure of the magnesium ferrite is an inverse spinel with a degree of inversion of 0.59. The saturation magnetization of the magnesium ferrite-containing exfoliated graphite is 16.1 emu/g, whereas its oil sorption capacity is as high as 54 g/g. Compaction of the exfoliated graphite to a density of 0.03 g/cm{sup 3} reduced its sorption capacity to 26 g/g. Further increasing the density of the material led to a considerable decrease in its sorption capacity.

36 MATERIALS SCIENCE↗

Variability of K d Values in Cementitious Materials and Sediments

Measured distribution coefficients (K d values) for environmental contaminants provide input data for performance assessments (PA) that evaluate physical and chemical phenomena for release of radionuclides from wasteforms, degradation of engineered components and subsequent transport of radionuclides through environmental media. Research efforts at SRNL to study the effects of formulation and curing variability on the physiochemical properties of the saltstone wasteform produced at the Saltstone Disposal Facility (SDF) are ongoing and provide information for the PA and Saltstone Operations. Furthermore, the range and distribution of plutonium K d values in soils is not known. Knowledge of these parameters is needed to provide guidance for stochastic modeling in the PA. Under the current SRS liquid waste processing system, supernate from F & H Tank Farm tanks is processed to remove actinides and fission products, resulting in a low-curie Decontaminated Salt Solution (DSS). At the Saltstone Production Facility (SPF), DSS is mixed with premix, comprised of blast furnace slag (BFS), Class F fly ash (FA), and portland cement (OPC) to form a grout mixture. The fresh grout is subsequently placed in SDF vaults where it cures through hydration reactions to produce saltstone, a hardened monolithic waste form. Variation in saltstone composition and cure conditions of grout can affect the saltstone's physiochemical properties. Variations in properties may originate from variables in DSS, premix, and water to premix ratio, grout mixing, placing, and curing conditions including time and temperature (Harbour et al. 2007; Harbour et al. 2009). There are no previous studies reported in the literature regarding the range and distribution of K d values in cementitious materials. Presently, the Savannah River Site (SRS) estimate ranges and distributions of K d values based on measurements of K d values made in sandy SRS sediments (Kaplan 2010). The actual cementitious material K d values and solubility values differ from the sandy sediments. The K d value range and distribution currently used in the PA are estimated to range between 0.25*K d and 1.75*K d , where the minimum and maximum values of the ranges reflect the 95% confidence level for the mean K d value (Kaplan 2010). The objective of the research with cementitious materials was to measure the range and distribution of a monovalent (Cs) and I - (anion), divalent (Sr), and trivalent (Eu) ions for a variety of laboratory-prepared saltstone surrogate samples to establish a K d range other than that which is presently used in the PA. It has been observed in laboratory samples that cure temperature profiles can affect properties such as heat of hydration, permeability, porosity, compressive strength, and set time (Harbour et al. 2009). The intent was to identify a range and distribution that could be used by stochastic modelers for the PA. Furthermore, the intent was to replace the arbitrarily selected distributions based on geological sandy sediments and to base it on actual cementitious materials. The scope of this study did not include understanding saltstone sorption mechanisms responsible for increasing or decreasing sorption. Similar to the work with cementitious materials, the purpose of the Pu sediment K d dataset was not to attempt to understand through statistics how to better understand Pu sorption to sediments or to lower Pu K d variance. The sediment Pu K d data is included in this study because it is a key risk driver for the PAs on the SRS, and there is presently no direct studies of Pu variability in SRS soils. Instead the distribution of Pu sediment K d values was assumed to be similar to other cations, as presented by Kaplan (2010).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Revised Guidelines for using Cellulose Degradation Product-Impacted Kd Values for Performance Assessments and Composite Analyses

Cellulosic materials include wood, paper, rags, and cardboard products. These materials are co-disposed with radiological waste at the Savannah River Site's (SRS) E-Area Low-Level Waste Facility (ELLWF). Cellulosic materials readily degrade in the environment to form cellulose degradation products (CDP) that will partition to the sediment or remain mobile in the groundwater. Savannah River National Lab (SRNL) has conducted studies to estimate the impact of CDP on radionuclide sorption to SRS sediments (Kd values). It was found that CDP impact on radionuclide sorption varies with radionuclide and CDP concentration. Furthermore, it was found that the amount of carbon (C) in the system could increase or decrease Kd values with respect to the base case of when no CDP was added. Throughout the expected pH range of the ELLWF, a low concentration of CDP in the system would increase Kd values (because C would sorb to the sediment and provide more exchange sites for radionuclides to sorb), whereas greater concentrations of CDP (≥20 mg/L C) would decrease Kd values (because C would remain in solution and complex the radionuclide and not permit the radionuclide to sorb to the sediment). A review of >230 dissolved organic carbon (DOC) groundwater concentrations in the Old Radioactive Waste Burial Ground (ORWBG) at the SRS indicated that the average DOC concentration, a gross measure of CDP, was 5 mg/L C. At approximately this DOC concentration, the laboratory studies demonstrated that no anions (Tc, I, or Se) or cations (Ni, Sr, Ce, Eu, Zr, or Th) have decreased sorption in the presence of carbon (an analogue for CDP).

09 BIOMASS FUELS↗

Deep Bed Iodine Sorbent Testing FY 2011 Report

Nuclear fission results in the production of fission products (FPs) and activation products that increasingly interfere with the fission process as their concentrations increase. Some of these fission and activation products tend to evolve in gaseous species during used nuclear fuel reprocessing. Analyses have shown that I129, due to its radioactivity, high potential mobility in the environment, and high longevity (half life of 15.7 million years), can require control efficiencies of up to 1,000x or higher to meet regulatory emission limits. Deep-bed iodine sorption testing has been done to evaluate the performance of solid sorbents for capturing iodine in off-gas streams from nuclear fuel reprocessing plants. The objectives of the FY 2011 deep bed iodine sorbent testing are: (1) Evaluate sorbents for iodine capture under various conditions of gas compositions and operating temperature (determine sorption efficiencies, capacities, and mass transfer zone depths); and (2) Generate data for dynamic iodine sorption modeling. Three tests performed this fiscal year on silver zeolite light phase (AgZ-LP) sorbent are reported here. Additional tests are still in progress and can be reported in a revision of this report or a future report. Testing was somewhat delayed and limited this year due to initial activities to address some questions of prior testing, and due to a period of maintenance for the on-line GC. Each test consisted of (a) flowing a synthetic blend of gases designed to be similar to an aqueous dissolver off-gas stream over the sorbent contained in three separate bed segments in series, (b) measuring each bed inlet and outlet gas concentrations of iodine and methyl iodide (the two surrogates of iodine gas species considered most representative of iodine species expected in dissolver off-gas), (c) operating for a long enough time to achieve breakthrough of the iodine species from at least one (preferably the first two) bed segments, and (d) post-test purging with pure N 2 to drive loosely or physisorbed iodine species off of the sorbent. Post-test calculations determine the control efficiencies for each bed, iodine loadings on the sorbent, and mass transfer zone depths. Portions of the iodine-laden sorbent from the first bed of two of the tests have been shipped to SNL for waste form studies. Over the past three years, we have explored a full range of inlet iodine and methyl iodide concentrations ranging from ~100 ppb to ~100 ppm levels, and shown adequate control efficiencies within a bed depth as shallow as 2 inches for lower concentrations and 4 inches for higher concentrations, for the AgZ-type sorbents. We are now performing a limited number of tests in the NC-77 sorbent from SNL. Then we plan to continue to (a) fill in data gaps needed for isotherms and dynamic sorbent modeling, and (b) test the performance of additional sorbents under development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Bismuth-Functionalized Silica Aerogels for Iodine Capture

The U.S. Department of Energy is looking into alternative sorbents for the removal of radioiodine from off-gas streams in a used nuclear fuel reprocessing plant. One class of sorbents considered are bismuth-functionalized silica aerogels which offer an efficient capture of iodine from off-gas streams and are environmentally friendly and lower cost when compared to silver-functionalized sorbents. Two types of bismuth-functionalized silica aerogels were successfully manufactured using a hierarchical synthesis approach:1) The Bi 3+ -aerogel with bismuth oxide nitrate hydroxide hydrate particles and 2) Bi-aerogel with bismuth metal and bismuth sulfide nanoparticles. Both sorbents exhibited high sorption capacity for iodine. However, presence of particles of different composition, size, and distribution on aerogel support resulted in different iodine loadings. The Bi 3+ -aerogel exhibited sorption capacity of 289 mg/g. In contrast, Bi-aerogel exhibited more that 20% higher sorption capacity. The heat-treatment of Bi 3+ -aerogel at 225? under hydrogen atmosphere increased iodine loading capacity to 351 mg/g.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Role of U(VI) Reduction by Geobacter species

Previous work had suggested that Acholeplasma palmae has a higher capacity for uranium sorption than other bacteria studied. Sorption studies were performed with cells in suspension in various solutions containing uranium, and results were used to generate uranium-biosorption isotherms. Results from this study showed that the U(VI) sorption capacity of G. uraniireducens was relatively similar in simple solutions, such as sodium chloride or bicarbonate. However, this ability to sorb uranium significantly decreased in groundwater. This suggested that certain chemicals present in the groundwater were inhibiting the ability of cell components of Geobacter to adsorb uranium. It was hypothesized that uranium removal would also be diminished in the bicarbonate solution. However, this did not seem to be the case, as uranium was as easily removed in the bicarbonate solution as in the sodium chloride solution.

54 ENVIRONMENTAL SCIENCES↗

Insight from simulations of single-well injection-withdrawal tracer tests on simple and complex fractures

The single-well injection withdrawal (SWIW) test, a tracer test utilizing only one well, is proposed as a useful contribution to site characterization of fractured rock, as well as providing parameters relevant to tracer diffusion and sorption. The usual conceptual model of flow and solute transport through fractured rock with low matrix permeability involves solute advection and dispersion through a fracture network coupled with diffusion and sorption into the surrounding rock matrix. Unlike two-well tracer tests, results of SWIW tests are ideally independent of advective heterogeneity, channeling and flow dimension, and, instead, focus on diffusive and sorptive characteristics of tracer (solute) transport. Thus, they can be used specifically to study such characteristics and evaluate the diffusive parameters associated with tracer transport through fractured media. We conduct simulations of SWIW tests on simple and complex fracture models, the latter being defined as having two subfractures with altered rock blocks in between and gouge material in their apertures. Using parameters from the Aspo site in Sweden, we calculate and study SWIW tracer breakthrough curves (BTCs) from a test involving four days of injection and then withdrawal. By examining the peak concentration C{sub pk} of the SWIW BTCs for a variety of parameters, we confirm that C{sub pk} is largely insensitive to the fracture advective flow properties, in particular to permeability heterogeneity over the fracture plane or to subdividing the flow into two subfractures in the third dimension orthogonal to the fracture plane. The peak arrival time t{sub pk} is not a function of fracture or rock properties, but is controlled by the time schedule of the SWIW test. The study shows that the SWIW test is useful for the study of tracer diffusion-sorption processes, including the effect of the so-called flow-wetted surface (FWS) of the fracture. Calculations with schematic models with different FWS values are conducted and the possibility of direct in situ measurement of FWS with SWIW tests is demonstrated.

54 ENVIRONMENTAL SCIENCES↗