Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILVER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Ultra-low-density silver aerogels via freeze-substitution

In this paper, we reported a method for fabricating <10 mg/cm 3 silver aerogels via the freeze casting of aqueous nanowire suspensions followed by freeze substitution and supercritical drying. This method overcomes the limitations of traditional freeze drying and yields highly uniform, crack-free monoliths that undergo no measurable shrinkage with excellent mold reproduction. Significantly, freeze substitution enables the use of high concentrations of cryoprotectants to control the freezing process and, hence, the pore architecture of the resulting aerogels. Due to its physical nature, this method is applicable to the fabrication of materials with a broad range of compositions.

36 MATERIALS SCIENCE↗

Saturable absorber based on silver nanoparticles for passively mode-locked lasers

A saturable absorber based on plane (tabular) stabilised silver nanocrystals, which is promising for picoseconds laser systems operating in the range 650–900 nm, is studied. This material has a plasmon decay time of about 2 ps, while its absorption at a pump intensity of 10 MW cm{sup -2} decreases by 1.6%, which is sufficient for using this crystal for passive mode locking. (control of laser radiation parameters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of nanosecond UV laser irradiation on luminescence and absorption in silver- and copper-containing phosphate glasses

Experimental evidence is presented that nanosecond UV laser irradiation of silver- and copper-containing barium phosphate glasses leads to luminescence quenching in the visible range. Subsequent heat treatment induces an absorption in the range 350 – 500 nm. These effects are due to the ionisation and fragmentation of subnanometre molecular clusters by laser radiation and subsequent (heat treatment-induced) formation of nanoparticles possessing plasmon resonance. Our numerical modelling results demonstrate the feasibility of producing stable Ag{sub n}Cu{sub m} hybrid molecular clusters in glass. Local modification of the optical properties of glass by laser light can be used for optical information recording. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mode loss spectra in THz quantum-cascade lasers with gold- and silver-based double metal waveguides

Spectra of the waveguide loss coefficient for THz radiation of a quantum-cascade laser with a gold- and silver-based double metal waveguide (DMW) are calculated based on the measurements of resistivity of the metals for different temperatures. It is shown that, taking into account the absorption of THz radiation by free carriers and optical phonons, the spectrum of total mode losses has a broad minimum in the range of 3 – 6 THz, which shifts to higher frequencies with increasing temperature. The minimum losses in the Au-based waveguide increase from 8 to 27 cm{sup –1} as temperature increases from 100 to 300 K. The use of an Ag-based DMW makes it possible to decrease the losses by 2 – 4 cm{sup –1} compared to the Au-based DMW. The bibliography includes 21 references. (terahertz radiation)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulations of hard X-ray generation by hot electrons in a silver target

A semi-analytical model is developed for the generation of X-ray bremsstrahlung in metallic targets with the inclusion of hot electron recirculation (refluxing). The hard bremsstrahlung and characteristic X-ray yields are calculated in relation to the thickness of a silver target for an s-polarised subpicosecond laser pulse intensity of 2 × 10{sup 19} W cm{sup –2}. The effect of hot electron recirculation in thin foils is shown to significantly improve the K{sub α} radiation and bremsstrahlung yields in a photon energy of 10 – 100 keV. By contrast, the 0.1 – 1 MeV bremsstrahlung photon yield from thin foils with hot electron recirculation corresponds approximately to the highest photon yield from those targets in which recirculation is insignificant. We make a comparative analysis of the highest laser-to-X-ray energy conversion efficiencies obtained to date. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal Structures of Multicopper Oxidase CueO Bound to Copper(I) and Silver(I): Functional Role of a Methonine-Rich Sequence

The multicopper oxidase CueO oxidizes toxic Cu(I) and is required for copper homeostasis in Escherichia coli. Like many proteins involved in copper homeostasis, CueO has a methionine-rich segment that is thought to be critical for copper handling. How such segments function is poorly understood. Here, we report the crystal structure of CueO at 1.1 {angstrom} with the 45-residue methionine-rich segment fully resolved, revealing an N-terminal helical segment with methionine residues juxtaposed for Cu(I) ligation and a C-terminal highly mobile segment rich in methionine and histidine residues. We also report structures of CueO with a C500S mutation, which leads to loss of the T1 copper, and CueO with six methionines changed to serine. Soaking C500S CueO crystals with Cu(I), or wild-type CueO crystals with Ag(I), leads to occupancy of three sites, the previously identified substrate-binding site and two new sites along the methionine-rich helix, involving methionines 358, 362, 368, and 376. Mutation of these residues leads to a {approx}4-fold reduction in kcat for Cu(I) oxidation. Ag(I), which often appears with copper in nature, strongly inhibits CueO oxidase activities in vitro and compromises copper tolerance in vivo, particularly in the absence of the complementary copper efflux cus system. Together, these studies demonstrate a role for the methionine-rich insert of CueO in the binding and oxidation of Cu(I) and highlight the interplay among cue and cus systems in copper and silver homeostasis.

59 BASIC BIOLOGICAL SCIENCES↗

Development and evaluation of a silver mordenite composite sorbent for the partitioning of xenon from krypton in gas compositions

A new engineered form composite sorbent for the selective separation of xenon from krypton in simulant composition off-gas streams resulting from the reprocessing of used nuclear fuel has been developed and evaluated. A sodium mordenite powder was incorporated into a macroporous polymer binder, formed into spherical beads and successfully converted to a 9 wt.% silver form composite sorbent. The final engineered form sorbent retained the characteristic surface area indicative of sodium mordenite powder. The sorbent was evaluated for xenon adsorption potential with capacities measured as high as 30 millimoles of xenon per kilogram of sorbent achieved at ambient temperature and 460 millimoles of xenon per kilogram sorbent at 220 K. Xenon/krypton selectivity was calculated to be 22.4 with a 1020 µL/L xenon, 150 µL/L krypton in a balance of air feed gas at 220 K. Furthermore, adsorption/desorption thermal cycling effects were evaluated with results indicating sorbent performance was not significantly impacted while undergoing numerous adsorption/desorption thermal cycles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Imaging of complex density in silver nanocubes by coherent x-ray diffraction.

When using coherent x-rays to perform lensless imaging, it is the complex wave field exiting the sample or, in the case of the Bragg geometry, the deformed electron density distribution of a crystal, that is being sought. For most samples, to some extent, the image will be complex, containing both an amplitude and phase variation across the sample. We have developed versions of the hybrid input-output (HIO) and error reduction (ER) algorithms that are very robust for the inversion to complex objects from three-dimensional (3D) coherent x-ray diffraction (CXD) data measured around a Bragg spot of a small crystal. The development and behavior of these algorithms will be discussed in the context of inverting a 3D CXD pattern measured around a (111) Bragg spot of a silver nanocube.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relativistic configuration-interaction oscillator strengths for lowest E1 transitions in silver and gold isoelectronic sequences

Relativistic oscillator strengths are computed for ns{sub 1/2}-np{sub 1/2,3/2} transitions in silver and gold isoelectronic sequences employing configuration-interaction method with numerical Dirac-Fock wave functions generated with noninteger outermost core shell occupation number. This method is optimized to represent efficiently the core-valence electron correlation that is known to be important for transitions under consideration. The presented results are compared with our earlier data computed with core-valence correlation represented in the semiclassical core polarization picture within single configuration Dirac-Fock scheme as well as available experimental values.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dynamics of femtosecond laser-induced melting of silver

We use optical third-harmonic generation to measure the melting dynamics of silver following femtosecond laser excitation. The dynamics reveals an unusual two-step process that is associated with the extreme electronic temperatures and very short time and length scales. In the first, which lasts a few picoseconds, the electron and phonon systems begin to equilibrate, and a thin surface layer undergoes melting. Heat conduction during this period is strongly suppressed by electron scattering from d-band excitations. In the second stage, the surface region remains above the melting temperature for a surprisingly long time, 20-30 ps, with the melt front propagating into the bulk at a velocity of {approx_equal}350 m s{sup -1}. In this stage, the electron and phonon systems again fall out of equilibrium and conduction of heat away from the surface region is now limited by the weak electron-phonon (e-p) coupling. From our model calculation, we propose that the melt depths in noble metals irradiated by femtosecond lasers are limited to thicknesses on the order of two to three times of the optical-absorption depth of the light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kondo decoherence : finding the right spin model for iron impurities in gold and silver.

We exploit the decoherence of electrons due to magnetic impurities, studied via weak localization, to resolve a long-standing question concerning the classic Kondo systems of Fe impurities in the noble metals gold and silver: which Kondo-type model yields a realistic description of the relevant multiple bands, spin, and orbital degrees of freedom? Previous studies suggest a fully screened spin S Kondo model, but the value of S remained ambiguous. We perform density functional theory calculations that suggest S=3/2. We also compare previous and new measurements of both the resistivity and decoherence rate in quasi-one-dimensional wires to numerical renormalization group predictions for S=1/2, 1, and 3/2, finding excellent agreement for S=3/2.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlled Coupling of a Single Nitrogen-Vacancy Center to a Silver Nanowire

We report on the controlled coupling of a single nitrogen-vacancy (NV) center to a surface plasmon mode propagating along a chemically grown silver nanowire (NW). We locate and optically characterize a single NV center in a uniform dielectric environment before we controllably position this emitter in the close proximity of the NW. We are thus able to control the coupling of this particular emitter to the NW and directly compare the photon emission properties before and after the coupling. The excitation of single plasmonic modes is witnessed and a total rate enhancement by a factor of up to 4.6 is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Conductivity Measurement of Extrusion-Printed Silver Using Modulated Photothermal Radiometry

Flexible printed electronics is a rapidly growing field with applications in conformal and flexible devices. However, the physical properties of the films created by many state-of-the-art printing methods become highly dependent on printing parameters, resulting in varying thermal properties often differing significantly from their bulk ink components. To understand the influence of the printing process, we build upon our previous work, where a noncontact optical technique, known as modulated photothermal radiometry (MPTR), was used to measure the thermal conductivity of aerosol-jet-printed thin films. In this work, we use the method to study the thermal properties of extrusion-printed silver on glass and alumina substrates. A noise-resistant data analysis fitting technique is applied using a 2-D heat transfer model. Here, the thermal conductivity measurement is validated using the Weidemann-Franz (WF) relationship from measured electrical conductivity values.

42 ENGINEERING↗

Spray-Coated Silver as Backside Metal for III–V Photovoltaic Devices on GaAs and Ge Substrates

The accelerated increase in demand for III-V space photovoltaics on GaAs and Ge substrates, as well as growing interests in terrestrial applications, motivate the development of cost-effective, high-throughput processing routes of these materials. Here, in this study, we assess spray-coated silver (Ag) back contact metallization as a substitute for electron-beam-evaporated metals currently used in industry. We find that the spray-coated Ag films are dense and continuous. By means of quantum efficiency, dark current-voltage, and illuminated current-voltage characterizations, we show that spray-coated GaAs and Ge solar cells perform similarly to baseline devices with electroplated Au, including under high current densities. We estimate that the thresholds for specific contact resistance below which back contacts do not significantly contribute to resistive loss are 2.1 x 10 -1 Ω•cm 2 for GaAs and 4.7 x 10 -2 Ω•cm 2 for Ge. We experimentally confirm that our spray-coated samples meet these requirements. Peel tests show that the adhesion of plain spray-coated Ag films to the back of p-type Ge substrates used in III-V solar cells is currently insufficient, whereas adhesion to p-type GaAs substrates is outstanding and requires no further optimization.

14 SOLAR ENERGY↗

Plasmon-enhanced photocurrent of Ge-doped InGaO thin film transistors using silver nanoparticles

Germanium-doped indium-gallium oxide (GIGO) thin film transistors (TFTs) decorated with silver (Ag) nanoparticles (NPs) were prepared to study the plasmon effect. GIGO films of various thicknesses were deposited on SiO{sub 2}/Si substrates, and Ag NPs (∼25 nm in diameter) were formed using a thermal evaporator and a postannealing process. The Ag NPs effectively absorbed light in the wavelength range of 500 and 600 nm, which corresponds to the plasmonic effect. Due to the plasmon resonance of Ag NPs, a significantly enhanced photocurrent was observed on the devices. The current increased by 348% with exposure to light when the Ag NPs were formed at the interface between the 10-nm-thick GIGO film and SiO{sub 2} substrate. The increased photocurrent revealed the presence of strong coupling between the localized plasmon and electrical carrier of the devices. The results show that the photocurrent of GIGO TFTs can be greatly enhanced when the plasmonic Ag NPs are located in the channel region of the devices.

36 MATERIALS SCIENCE↗

Enhancement of Fluorescence and Raman Scattering in Cyanine-Dye Molecules on the Surface of Silicon-Coated Silver Nanoparticles

A method of formation of a composite structure based on silver nanoparticles and a thin protective silicon film (AgNPs/Si) is developed. Enhancement of the fluorescence and Raman scattering in cyaninedye molecules deposited onto the formed nanostructure is observed. The optical properties and morphology stability of particles that are in contact with cyanine-dye solutions in organic solvents are studied. It is shown that the AgNPs/Si composite structure can be multiply used as an SERS-active surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photochromic Properties and Surface Enhanced Raman Scattering Spectra of Indoline Spiropyran in Silver-Based Nanocomposite Films

The structure and photochromic transformations of composite organometallic nanosystems composed of Ag nanoparticles covered with a layer of indoline-spiropyran (ISP) molecules from solutions were studied by spectrophotometry, surface Raman scattering spectroscopy (SERS) and quantum chemistry. Analysis of experimental data showed that studied nanostructured systems have photochromic properties, manifested in the reversible photo-induced changes both of the electronic-absorption spectra and of the relative intensity of the SERS bands. The open form of ISP, formed in the organometallic nanostructured film as a result of photochromic transformations, has an adsorption geometry, and, possibly, a conformation different from that formed as a result of chemisorption of ISP molecules on silver colloids.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Intra- and intergroup azimuthal correlations of particles in the interaction of gold nuclei with silver and bromine nuclei of track emulsions at the projectile energy of 10.6 GeV per nucleon

Inter- and intragroup azimuthal correlations of target and projectile fragments and of shower particles in the interactions between gold nuclei of energy 10.6 GeV per nucleon and silver and bromine nuclei of a track emulsion are studied at intermediate values of the impact parameter. The asymmetry index {beta}'{sub 1} and the collinearity index {beta}'{sub 2} of groups' asymmetry vectors are used to study azimuthal correlations between two and three groups of particles. The interplay of effects of intra- and intergroup azimuthal particle correlations is investigated.

74 ATOMIC AND MOLECULAR PHYSICS↗