Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHELL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Wireless energy transfer between anisotropic metamaterials shells

The behavior of strongly coupled Radial Photonic Crystals shells is investigated as a potential alternative to transfer electromagnetic energy wirelessly. These sub-wavelength resonant microstructures, which are based on anisotropic metamaterials, can produce efficient coupling phenomena due to their high quality factor. A configuration of selected constitutive parameters (permittivity and permeability) is analyzed in terms of its resonant characteristics. The coupling to loss ratio between two coupled resonators is calculated as a function of distance, the maximum (in excess of 300) is obtained when the shells are separated by three times their radius. Under practical conditions an 83% of maximum power transfer has been also estimated. -- Highlights: •Anisotropic metamaterial shells exhibit high quality factors and sub-wavelength size. •Exchange of electromagnetic energy between shells with high efficiency is analyzed. •Strong coupling is supported with high wireless transfer efficiency. •End-to-end energy transfer efficiencies higher than 83% can be predicted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of magnetically separable Sn doped magnetite/silica core-shell structure and photocatalytic property

Sn doped Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures with the magnetic and photocatalytic properties have been successfully synthesized using Fe{sub 3}O{sub 4} microspheres as the precursor. The morphology, phase and structure of the bifunctional products were investigated by X-ray powder diffraction, transmission electron microscopy, selected-area electron diffraction, high-resolution transmission electron microscopy, energy dispersive spectroscopy, and scanning electron microscopy. The effects of the amount and hydrolysis rate of tetraethyl orthosilicate on the preparation of the Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures were investigated. Low concentration and slow hydrolysis rate of tetraethyl orthosilicate were useful to obtain the uniform silica coated Fe{sub 3}O{sub 4}. The magnetic measurements indicated that the Sn doped Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures showed ferromagnetic property and the magnetic saturation value slightly decreased after coated the silica layer. The magnetic Sn doped Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures exhibited good photocatalytic activity in the degradation of methyl orange and could be separated by applying an appropriate magnetic field.

36 MATERIALS SCIENCE↗

Formation mechanism of monodispersed spherical core-shell ceria/polymer hybrid nanoparticles

Graphical abstract: The formation mechanism for core-shell nanoparticles is considered to be as follows: nucleation and particle growth occur simultaneously (left square); very slow particle growth occurs (middle square). Highlights: {yields} The size of the resultant nanoparticles was strongly and complicatedly dependent on the set temperature used during reflux heating and the PVP molecular weight. {yields} The size of the nanoparticles increased by a 2-step process as the reflux heating time increased. {yields} The IR spectral changes with increasing reflux time indicated the increase in the number of cross-linked polymers in the shell. -- Abstract: Very unique core-shell ceria (cerium oxide)/polymer hybrid nanoparticles that have monodispersed spherical structures and are easily dispersed in water or alcohol without the need for a dispersant were reported recently. The formation mechanism of the unique nanoparticles, however, was not clear. In order to clarify the formation mechanism, these nanoparticles were prepared using a polyol method (reflux heating) under varied conditions of temperature, time, and concentration and molecular weight of added polymer (poly(vinylpyrrolidone)). The size of the resultant nanoparticles was strongly and complicatedly dependent on the set temperature used during reflux heating and the poly(vinylpyrrolidone) molecular weight. Furthermore, the size of the nanoparticles increased by a 2-step process as the reflux heating time increased. The IR spectral changes with increasing reflux time indicated the increase in the number of cross-linked polymers in the shell. From these results, the formation mechanism was discussed and proposed.

36 MATERIALS SCIENCE↗

Synthesis of TiO{sub 2}/Bi{sub 2}S{sub 3} heterojunction with a nuclear-shell structure and its high photocatalytic activity

Highlights: ► Bi{sub 2}S{sub 3} was doped into TiO{sub 2} and it was clearly proved by the expander of the crystalline lattice in XRD result. ► As-prepared TiO{sub 2}/Bi{sub 2}S{sub 3} heterojunctions have a nuclear-shell structure which has not been reported. ► As-prepared TiO{sub 2}/Bi{sub 2}S{sub 3} heterojunctions have the excellent photocatalytic activity. -- Abstract: TiO{sub 2}/Bi{sub 2}S{sub 3} heterojunctions with a nuclear-shell structure were prepared by the coprecipitation method. The products were characterized by X-ray diffraction analysis, Raman spectra, transmission electron microscope images and energy dispersion X-ray spectra. Results showed that as-prepared Bi{sub 2}S{sub 3} was urchin-like, made from many nanorods, and TiO{sub 2}/Bi{sub 2}S{sub 3} heterojunctions have a similar nuclear-shell structure, with Bi{sub 2}S{sub 3} as the shell and TiO{sub 2} as the nuclear. The photocatalytic experiments performed under UV irradiation using methyl orange as the pollutant revealed that the photocatalytic activity of TiO{sub 2} could be improved by introduction of an appropriate amount of Bi{sub 2}S{sub 3}. However, excessive amount of Bi{sub 2}S{sub 3} would result in the decrease of photocatalytic activity of TiO{sub 2}. The relative mechanism was proposed.

36 MATERIALS SCIENCE↗

High coercivity sized controlled cobalt–gold core–shell nano-crystals prepared by reverse microemulsion

Graphical abstract: - Highlights: • Calculating the crystallinity percentage and percentage of phases presented in Co–Au core–shell nanoparticles. • Magnetic properties of four groups nanogarin: 5, 10, 15, 20 nm. • Single domain ferromagnetic materials with high coercivity at room temperature. • Intrinsic blocking temperature measured in zero field cooled-warmed (ZFC-W). - Abstract: Size-controlled cobalt–gold core–shell nanoparticles were synthesized via the reverse-micelle microemulsion method. In order to control the size of the nanoparticles, the nucleation and growth process were performed within a confined space by adjusting the water to surfactant ratio of reverse micelles solution during synthesis. The crystallinity percentage and percentage of phases presented in Co–Au core–shell nanoparticles were calculated using X-ray diffraction data. The results from transmission electron microscopy provide direct evidence for core–shell structure nanomaterials. Magnetic properties of the samples were investigated using a vibrating sample magnetometer. The as-prepared samples showed significant coercivity at room temperature. The intrinsic blocking temperature was experimentally deduced from zero-field-cooled warmed (ZFC-W) curves by a simple method without employing an external magnetic field. The B-field dependence temperature data of Co–Au nanoparticles exhibited an intrinsic blocking temperature at 45 K. Annealing these samples at 400 °C caused an increase in particle size, crystallinity percentage and further enhanced their magnetic properties.

36 MATERIALS SCIENCE↗

Al-doped ZnS shell as a surface shield for enhancing the stability of Cu:ZnInS/ZnS/ZnS:Al quantum dots and their application in light emitting diodes

Graphical abstract: The normalized electroluminescence spectra of Cu:ZnInS@ZnS:Al (a) and Cu:ZnInS@ZnS quantum dot based LEDs under an injection current of 10 mA for various operation times are presented. The quantum dots were mixed with same amount of silicone resin and treated at 50 °C for 30 min. - Highlights: • The self-passivated Cu:ZnInS@ZnS:Al quantum dots were synthesized successfully. • The thermal and current stability of Cu:ZnInS@ZnS:Al quantum dots were improved. • The Cu:ZnInS@ZnS:Al quantum dots had a small reduction of 20% in PL lifetime under thermal annealing from 50 °C to 250 °C. • The Cu:ZnInS@ZnS:Al quantum dot based LED had a 3% luminescence enhancement under 10 mA injection current for a long time. - Abstract: Cu:ZnInS/ZnS/ZnS:Al quantum dots (QDs) with a Cu-doped inner core and an Al-doped outer shell were synthesized in this work, exhibiting improved stability of luminescence, compared with Cu:ZnInS/ZnS/ZnS QDs. The X-ray diffraction patterns and photoluminescence spectra confirmed that the Al ions were doped into the ZnS shell. The stability of Cu:ZnInS/ZnS/ZnS:Al QDs under various thermal annealing temperatures was studied by steady-state and time resolved photoluminescence spectroscopy. The Cu:ZnInS/ZnS/ZnS:Al QDs had a relatively small reduction of 20% in photoluminescence lifetime from 167 ns under thermal annealing at 50 °C to 132.8 ns at 250 °C, compared to a 55% drop for the undoped ones, indicating less thermal effect on the photoluminescence of the QDs with an Al-doped shell. The Cu:ZnInS/ZnS/ZnS:Al QD-based light emitting diodes (LEDs) had a 3% luminescence enhancement under injection current of 10 mA for 30 h, compared to a 13% reduction for the undoped QDs, suggesting improved thermal stability of photoluminescence for the QDs with Al-doped shell. Finally, Cu:ZnInS/ZnS/ZnS:Al QD-based white LEDs with good color rendering index (>80) and correlated color temperature (<4500 K) were fabricated by combining with green emitting CuInS{sub 2}/ZnS QDs. The self-passivated QDs show promises for enhancing thermal stability of QD-based LEDs in the conserved energy lighting industry.

36 MATERIALS SCIENCE↗

Core-shell structured α-Fe2O3@CeO2 heterojunction for the enhanced visible-light photocatalytic activity

Highlights: • CeO{sub 2}–coated α-Fe{sub 2}O{sub 3} sample was prepared via a hydrothermal route. • α-Fe{sub 2}O{sub 3}@CeO{sub 2} presented the excellent photocatalytic activity and stability. • The heterojunction interface facilitated the separation of electron-hole pairs. • Ce{sup 4+}/Ce{sup 3+} redox couple promoted the efficient electron transfer. - Abstract: CeO{sub 2}-coated α-Fe{sub 2}O{sub 3} nanoparticles (α-Fe{sub 2}O{sub 3}@CeO{sub 2}) with the enhanced photocatalytic activity were synthesized by a hydrothermal route and performed for the visible light driven photo-degradation of methylene blue (MB). The photocatalytic activity of α-Fe{sub 2}O{sub 3}@CeO{sub 2} is greatly affected by the thickness of CeO{sub 2} shell under the same conditions. The core-shell structured α-Fe{sub 2}O{sub 3}@CeO{sub 2} sample exhibited a narrower band gap energy in comparison to the pure α-Fe{sub 2}O{sub 3} and CeO{sub 2} bulks, leading to the excellent photocatalytic activity and stability for the degradation of MB under visible light irradiation after five cycle times. The core-shell structured α-Fe{sub 2}O{sub 3}@CeO{sub 2} sample presented higher degradation activity than that of the supported 8-Fe/CeO{sub 2} bulks with optimized α-Fe{sub 2}O{sub 3} loading of 8%. It can be ascribed to the Ce{sup 4+}/Ce{sup 3+} redox couple and the heterojunction interfaces of core-shell structured α-Fe{sub 2}O{sub 3}@CeO{sub 2} sample, which can promote the electrons transfer and restrain the photoexcited electron-hole recombination, leading to the excellent degradation activity under visible light irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase-control synthesis and catalytic property of magnetic Ni@NixPy core-shell microstructures

Highlights: • Ni@Ni{sub x}P{sub y} core-shell microstructures are synthesized by a low-temperature phosphidation route. • The initial Ni/NaH{sub 2}PO{sub 2} molar ratio can strongly affect the phase of the final product. • Ni@Ni{sub x}P{sub y} microstructures present good catalytic activity for the reduction of 4-nitrophenol. • The catalytic property of Ni@Ni{sub x}P{sub y} microstructures presents markedly phase-dependent features. - Abstract: Magnetic Ni@Ni{sub x}P{sub y} core-shell microstructures were successfully synthesized by a simple low-temperature phosphidation route, employing Ni nanospheres as the initial nickel source, NaH{sub 2}PO{sub 2}·H{sub 2}O as the phosphorus ion source. The phosphidation reaction was carried out in N{sub 2} atmosphere at 300 °C for 2 h. Experiments showed that the initial Ni/NaH{sub 2}PO{sub 2} molar ratio could strongly affect the phase of the final product. When the Ni/NaH{sub 2}PO{sub 2} molar ratio of 1:2.77 was used, hexagonal Ni{sub 2}P phase was obtained; while the Ni/NaH{sub 2}PO{sub 2} molar ratio was 1:5.54, hexagonal Ni{sub 5}P{sub 4} phase was produced. It was found that the magnetic properties of the products gradually decreased with the conversion from Ni nanospheres, to Ni@Ni{sub 2}P and to Ni@Ni{sub 5}P{sub 4}. Moreover, initial Ni nanospheres, Ni@Ni{sub 2}P and Ni@Ni{sub 5}P{sub 4} core-shell microstructures presented outstanding catalytic activities for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in excess NaBH{sub 4} solution. Ni@Ni{sub 5}P{sub 4} core-shell microstructures owned the best catalytic activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Engineering a highly dispersed core@shell structure for efficient photocatalysis: A case study of ternary novel BiOI@MIL-88A(Fe)@g-C3N4 nanocomposite

Highlights: • Novel ternary BiOI@MIL-88A(Fe)@g-C{sub 3}N{sub 4} core@shell photocatalyst is reported. • Photocatalytic degradation mechanism of organic pollutants is investigated. • It is divulged that the photodegradation is increased by BiOI supporting. • Core@shell structure of MIL-88A(Fe)@g-C{sub 3}N{sub 4} causes high activity. • Strong visible light absorption and electron transfer improve activity. - Abstract: Ternary novel BiOI@MIL-88A(Fe)@g-C{sub 3}N{sub 4} nanocomposite with core@shell structure was successfully synthesized by hydrothermal method. Fabricated photocatalysts were characterized and results confirmed the formation of MIL-88A(Fe)@g-C{sub 3}N{sub 4} core@shell structure and subsequently BiOI decoration on the surface of MIL-88A(Fe)@g-C{sub 3}N{sub 4}. Photocatalytic performances of prepared samples were investigated for degradation of Acid Blue 92 (AB92), Rhodamine B (RhB) and phenol under visible irradiation. It is clearly demonstrated that the as-prepared ternary BiOI@MIL-88A(Fe)@g-C{sub 3}N{sub 4} composites exhibits exceptional visible-light photocatalytic activities for cationic, anionic as well as neutral pollutant molecules compared to the widely accepted outstanding g-C{sub 3}N{sub 4}. It is mainly proved that the exceptional photocatalytic efficiencies are comprehensively ascribed to the porous structure of MIL-88A(Fe)@g-C{sub 3}N{sub 4}, greatly promoted charge separation and introduced catalytic functions to the carrier-related redox reactions by decorating BiOI and coupling g-C{sub 3}N{sub 4}, to modulate holes and electrons. Additionally, studies performed using radical scavengers showed the main reactive species in the photocataytic reaction for all chemical pollutant degradation.

36 MATERIALS SCIENCE↗

Fabrication of highly efficient carbon coated exfoliated tungsten disulfide nanosheets core-shell nanostructure as a promising solar-light driven photocatalyst

Highlights: • Investigated the benefits of exfoliation mechanism of WS{sub 2} nanosheets. • C@e-WS{sub 2} was successfully synthesized via two step exfoliation -hydrothermal process. • C@e-WS{sub 2} core-shell confirmed by HRTEM. • C@e-WS{sub 2} core-shell photocatalyst exhibited excellent photocatalytic activity. • Photodegradation mechanism of C@e-WS{sub 2} photocatalyst is elucidated and discussed. - Abstract: Exfoliated Tungsten disulfide (e-WS{sub 2}) nanosheets were obtained from bulk Tungsten disulfide (WS{sub 2}) in a liquid-phase ultrasonic exfoliation method using a DMF solvent. Core-shell mannered carbon coating was developed by hydrothermal process on exfoliated Tungsten disulfide (e-WS{sub 2}) to enhance the efficient charge separation, specific surface area with mesoporosity and stability for chemical processes and mechanical strains. The carbon coated e-WS{sub 2} nanosheets (C@e-WS{sub 2}) was performed by series of characterization techniques and explored to the photocatalytic degradation of malachite green (MG) dye by comparing with bulk WS{sub 2} and e-WS{sub 2}. Among all the photocatalysts highest performance was observed for the C@e-WS{sub 2}. C@e-WS{sub 2} catalyst displays more than 11 fold enhancements in the photocomposition rate of MG over bulk WS{sub 2} and nearly 8 fold improvements over e-WS{sub 2} for 90 min irradiation. In addition, for complete degradation of MG dye over the bulk WS{sub 2}, e-WS{sub 2}, and C@e-WS{sub 2} catalysts were observed at 150, 130, and 90 min under simulated solar light irradiation. The results obtained using core-shell mannered C@e-WS{sub 2} are stepping stone for developing cost-effective and noble metal-free catalysts for photodegradation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

P-n heterostructured TiO2/NiO double-shelled hollow spheres for the photocatalytic degradation of papermaking wastewater

Highlights: • P-n heterostructured TiO{sub 2}/NiO double-shelled hollow spheres were prepared. • A cubic-structured NiO layer is grown on surface of anatase TiO{sub 2} hollow sphere. • TiO{sub 2}/NiO show high photocatalytic activity for papermaking wastewater degradation. • The COD{sub Cr} removal rate of wastewater reaches 98.1% after 6 h of photodegradation. - Abstract: P-n heterostructured TiO{sub 2}/NiO double-shelled hollow spheres were prepared through sol–gel and hydrothermal processes. TiO{sub 2}/NiO nanomaterials were comprehensively characterized, and the results reveal that a cubic-structured NiO layer is successfully grown on the surface of the anatase TiO{sub 2} hollow sphere to achieve a p-n heterostructure. The thickness of TiO{sub 2} shell is ∼20 nm, and that of NiO shell is 10–25 nm. Compared with the pure TiO{sub 2} hollow spheres, the prepared p-n heterostructures display a considerably higher photocatalytic activity for papermaking wastewater degradation under UV light irradiation. The chemical oxygen demand removal rate of papermaking wastewater reaches 98.1% after 6 h of photodegradation with DSTN2 as the photocatalyst. The enhanced photocatalytic activity is due to the synergetic effects of p-n heterostructures and the large specific surface area of the catalyst; these effects may promote the separation of photogenerated electron–hole pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the gain of inner-shell X-ray laser transitions in neon, argon, and copper driven by X-ray free electron laser radiation using photo-ionization and photo-excitation processes

Using an X-ray free electron laser (XFEL) at 960 eV to photo-ionize the 1s electron in neutral neon followed by lasing on the 2p-1s transition in singly-ionized neon, an inner-shell X-ray laser was demonstrated at 849 eV in singly-ionized neon gas several years ago. It took decades to demonstrate this scheme, because it required a very strong X-ray source that could photo-ionize the 1s (K shell) electron in neon on a timescale comparable to the intrinsic Auger lifetime in neon of 2 fs. In this paper, we model the neon inner shell X-ray laser under similar conditions to those used in the XFEL experiments at the SLAC Linac Coherent Light Source (LCLS), and show how we can improve the efficiency of the neon laser and reduce the drive requirements by tuning the XFEL to the 1s-3p transition in neutral neon in order to create gain on the 2p-1s line in neutral neon. We also show how the XFEL could be used to photo-ionize L-shell electrons to drive gain on n = 3–2 transitions in singly-ionized Ar and Cu plasmas. These bright, coherent, and monochromatic X-ray lasers may prove very useful for doing high-resolution spectroscopy and for studying non-linear process in the X-ray regime.

36 MATERIALS SCIENCE↗

Stoichiometry of the Core Determines the Electronic Structure of Core-Shell III-V/II-VI Nanoparticles.

Recently, III-V quantum dots (QDs) emerged as an environmentally friendly alternative to CdSe; however, they exhibit broader emission spectra and inferior photoluminescence quantum yield. Here, we report a computational study of the optoelectronic properties of InxPz and InxGayPz QDs interfaced with zinc chalcogenide shells. Using density functional theory, we show that fine-tuning the composition of the core is critical to achieving narrow emission lines. We show that core-shell nanoparticles, where the core has the same diameter but different stoichiometries, may absorb and emit at different wavelengths, leading to broad absorption and emission spectra. The value of the fundamental gap of the core-shell particles depends on the ratio between the number of group III and P atoms in the core and is maximized for the 1:1 composition. We also show that the interplay between quantum confinement and strain determines the difference in the electronic properties of III-V QDs interfaced with ZnS or ZnSe shells.

Rusishvili, Mariami↗

Probing the Core–Shell Organization of Nanoconfined Methane in Cylindrical Silica Pores Using In Situ Small-Angle Neutron Scattering and Molecular Dynamics Simulations

Determining the structure of nanoconfined fluids is essential for predicting the fate of these fluids in subsurface geologic formations with nanoporous features and for engineering novel nanoporous materials for storing compressed gases. In this study, we probe the structure of nanoconfined methane at pressures in the range of 15–100 bar using in situ small-angle neutron scattering (SANS) measurements and molecular dynamics (MD) simulations. The structure of methane is probed in MCM-41 and SBA-15 with cylindrical pores and diameters of 3.3 and 6.8 nm, respectively. In situ SANS measurements and MD simulations showed that the confined methane molecules are organized in a core–shell structure, with the shell arising from the adsorption of methane molecules on the silica surface. The shell thicknesses of the adsorbed deuterated methane (CD4) molecules in MCM-41 obtained by SANS measurements are 1.4 ± 0.5, 2.1 ± 0.1, 3.2 ± 0.8, 4.0 ± 0.3, and 6.0 ± 0.7 Å at equilibrated pressures of 15.6, 35.6, 55.5, 73.3, and 95.7 bar, respectively. The shell thicknesses of the adsorbed CD4 layer in SBA-15 pores are 2.7 ± 0.5, 4.3 ± 0.7, 6.6 ± 0.7, 10.2 ± 0.3, and 14.6 ± 0.8 Å at equilibrated pressures of 15.5, 32.7, 52.4, 70, and 99.5 bar, respectively. These experimental results are in close agreement with the results predicted from MD simulations. Adsorption of methane molecules on the silica surfaces is primarily driven by van der Waals interactions between the methane molecules and the hydroxyl groups on the silica surface, while electrostatic interactions play a minor role. In conclusion, the experimental and simulation approaches described in this study provide fundamental insights into the organization of confined gases using methane as a specific example in the context of compressed fluid storage in natural and engineered materials for adaptive energy use.

03 NATURAL GAS↗

Resonance Raman Study of Shell Morphology in InP/ZnSe/ZnS Core/Shell/Shell Nanocrystals

Resonance Raman spectra and absolute cross sections of InP/ZnSe/ZnS core/shell/shell nanocrystals have been obtained at excitation wavelengths of 501.7, 457.9, and 410 nm. Eight different structures having nearly the same lowest excitonic absorption wavelength but significantly different stoichiometries are compared. The Raman spectra show phonon features attributable to both the InP core and the ZnSe shell. The largest differences among the structures are seen in the ZnSe phonon region by using excitation at 457.9 nm, on the low-energy edge of the absorption features having significant contributions from the ZnSe shell. Here, structures that are nearly stoichiometric (In:P ratio ≈1.0) show a sharp, strongly polarized peak near the bulk ZnSe phonon frequency (~250 cm –1 ) and a weak lower-frequency shoulder with a higher depolarization ratio. Structures having excess indium show a stronger low-frequency shoulder near 225 cm –1 and lower integrated Raman intensities throughout the ZnSe phonon region. These changes are attributed to the presence of indium atoms in the ZnSe shell. Furthermore, these results support a previous assignment of a slow rise component in the time-resolved photoluminescence spectra of nonstoichiometric structures to transient trapping of holes at indium defects in the shell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A pathway for the growth of core-shell Pt-Pd nanoparticles

In this study, the aging of both Pt-Pd nanoparticles and core-shell Pt-Pd nanoparticles has been reported to result in alloying of Pt with Pd. In comparison to monometallic Pt catalysts, the growth of Pd-Pt bimetallics is slower; however, the mechanism of growth of particles and the mechanism by which Pd improves the hydrothermal durability of bimetallic Pd-Pt particles remains uncertain. In our work on hydrothermal aging of core-shell Pt-Pd nanoparticles, synthesized by solution methods, with varying Pd:Pt ratio of 1:4, 1:1, and 4:1, we compare the growth of core-shell Pt-Pd nanoparticles and find that particles grow by migrating and joining together. The unique feature of the observed growth is that Pd shells from both particles open up and join, allowing the cores to merge. At high temperatures, alloying occurs in good agreement with reports by other workers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Organophilic, Superparamagnetic, and Reversibly Thermoresponsive Silica-Polypeptide Core–Shell Particles

Particles with a superparamagnetic cobalt inner core, silica outer core, and covalently bound homopolypeptide shell were investigated under thermal and magnetic stimuli. The homopolypeptide was poly(ε-carbobenzyloxy- l -lysine), PCBL, which is known to exhibit a thermoreversible coil ⇔ helix transition when dissolved as a pure polymer in m- cresol. Tethering to a core particle did not prevent PCBL from undergoing this conformational transition, as confirmed by dynamic light scattering and optical rotation, but the transition was broadened compared to that of the untethered polymer. The Co@SiO 2 -PCBL hybrid particles retained the superparamagnetic properties of the cobalt inner nougat. Indeed, some response remains even after aging for >5 years. The aged PCBL shell also preserved its responsiveness to temperature, although differences in the shape of the size vs temperature transition curve were determined compared to the freshly made particles. A reversible coil ⇔ helix transition for a particle-bound polypeptide in a pure organic solvent is rare. Further to providing a convenient tool for characterizing coil ⇔ helix transitions for surface-bound polypeptides without interference from pH or the strong ionic forces that dominate behavior in aqueous systems, the Co@SiO 2 -PCBL/ m -cresol system may prove useful in studies of the effect of shell polymer conformation on colloid interactions. The stability of the magnetic core and polypeptide shell suggest a long shelf life for Co@SiO 2 -PCBL, which can, in principle, be deprotected to yield positively charged Co@SiO 2 -poly( l -lysine) particles for possible transfection or antimicrobial applications or chained magnetically to produce responsive poly(colloids).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave-Assisted Synthesis of Cu@IrO 2 Core-Shell Nanowires for Low-Temperature Methane Conversion

A facile microwave-assisted synthesis was developed for the tunable fabrication of a novel Cu@IrO 2 core@shell nanowire motif. Experimental parameters, such as (i) reaction time, (ii) the method of addition of the Ir precursor, (iii) capping agent, (iv) reducing agent, as well as (v) the capping agent-to-reducing agent ratio, were subsequently optimized. The viability of other methods based on previously reported literature, such as refluxing, stirring, and physical sonication, was studied and compared with our optimized microwave-assisted protocol in creating our as-prepared materials. It should be noted that the magnitude of the IrO 2 shell could be tailored based on varying the Cu: Ir ratio coupled with judicious variations in the amounts of capping agent and reducing agent. Structural characterization techniques, such as XRD, XPS, and HRTEM (including HRTEM-EDS), were used to analyze our Cu@IrO 2 motifs. Specifically, the shell could be reliably tailored from sizes of 10 nm, 8 nm, 6 nm, and 3.5 nm with corresponding Cu: Ir ratios of 10:1, 15:1, 20:1, and 25:1, respectively. Moreover, the structural integrity of the motifs was probed and found to have been maintained after not only heat treatment but also the post-methane conversion process, indicative of an intrinsically high stability. Both components within the CuO-IrO 2 interface were able to activate methane at temperatures between 400 to 500 K with a reduction of the associated metal cations (Cu 2+ → Cu 1+ ; Ir 4+ → Ir 3+ ) and the deposition of CH x fragments on the surface, as clearly observed in the ambient-pressure XPS results. Thus, on the basis of their stability and chemical activity, these core-shell materials could be very useful for the catalytic conversion of methane into 'higher value" chemicals.

36 MATERIALS SCIENCE↗