SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation and companion paper discuss the four critical concepts required for using the ASTM industry standard towards the certification of a highly autonomous aircraft.
The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.
In this paper for certain long transform lengths, Winograd's algorithm for computing the discrete Fourier transform (DFT) is extended considerably. This is accomplished by performing the cyclic convolution, required by Winograd's method, with the Mersenne prime number-theoretic transform developed originally by Rader. This new algorithm requires fewer multiplications than either the standard fast Fourier transform (FFT) or Winograd's more conventional algorithm. However, more additions are required.
The trajectory required for the Cassini spacecraft to reach Saturn will subject the spacecraft to a 0.61 AU temperature environment at perihelion. Temperatures on some sunlit blanket surfaces at 0.61 AU can reach levels that are beyond the service capability of the conventional Mylar/Dacron net MLI. The majority of the blanket surfaces, however, will experience temperatures with an upper bound of 250(deg) C. The maximum allowable temperature for Mylar/Dacron net is determined to be 220(deg)C. Kapton can withstand temperatures in excess of 400(deg) C; however, the high cost of embossed Kapton relative to Mylar/Dacron net requires a baseline design which includes a standard layup and a high-temperature layup. The high-temperature layup is utilized at a limited number of locations, while at least 90% of the blankets are of the standard layup. The verification of both layups' capability to meet all temperature requirements has been accomplished by a comprehensive test program which addressed their high-temperature survivability, effective emittance, and optical and electrical properties. This paper focuses on the high-temperature exposure tests which helped define the hybrid standard layup, and which demonstrated the adequacy of both layups in withstanding their respective thermal environments.
This document examines the challenges inherent in designing and regulating to support human-automation interaction for new technologies that will deployed into complex systems. A key question for new technologies, is how work will be accomplished by the human and machine agents. This question has traditionally been framed as how functions should be allocated between humans and machines. Such framing misses the coordination and synchronization that is needed for the different human and machine roles in the system to accomplish their goals. Coordination and synchronization demands are driven by the underlying human-automation architecture of the new technology, which are typically not specified explicitly by the designers. The human machine interface (HMI) which is intended to facilitate human-machine interaction and cooperation, however, typically is defined explicitly and therefore serves as a proxy for human-automation cooperation requirements with respect to technical standards for technologies. Unfortunately, mismatches between the HMI and the coordination and synchronization demands of the underlying human-automation architecture, can lead to system breakdowns. A methodology is needed that both designers and regulators can utilize to evaluate the expected performance of a new technology given potential human-automation architectures. Three experiments were conducted to inform the minimum HMI requirements a detect and avoid system for unmanned aircraft systems (UAS). The results of the experiments provided empirical input to specific minimum operational performance standards that UAS manufacturers will have to meet in order to operate UAS in the National Airspace System (NAS). These studies represent a success story for how to objectively and systematically evaluate prototype technologies as part of the process for developing regulatory requirements. They also provide an opportunity to reflect on the lessons learned from a recent research effort in order to improve the methodology for defining technology requirements for regulators in the future. The biggest shortcoming of the presented research program was the absence of the explicit definition, generation and analysis of potential human-automation architectures. Failure to execute this step in the research process resulted in less efficient evaluation of the candidate prototypes technologies in addition to the complete absence of different approaches to human-automation cooperation. For example, all of the prototype technologies that were evaluated in the research program assumed a human-automation architecture that relied on serial processing from the automation to the human. While this type of human-automation architecture is typical across many different technologies and in many different domains, it ignores different architectures where humans and automation work in parallel. Defining potential human-automation architectures a priori also allows regulators to develop scenarios that will stress the performance boundaries of the technology during the evaluation phase. The importance of adding this step of generating and evaluating candidate human-automation architectures prior to formal empirical evaluation is discussed.
Heterogeneous catalysis presents a distinct challenge for artificial intelligence (AI). Data sets are often small and inconsistently reported, catalyst representations are not standardized, and extracting fundamental knowledge requires integrating performance data, spectroscopic characterizations, and mechanistic models across multiple scales. Language offers a unifying representation across these modalities, making catalysis well suited for leveraging large language models (LLMs). By standardizing how catalytic data is represented, LLMs make dispersed experimental results more accessible to downstream statistical modeling. In this perspective, we focus our discussion around three opportunities where LLMs can significantly contribute to catalysis: (1) text to properties; (2) text to structure; and (3) text to mechanistic models. The discussion is followed by a perspective section on LLM-readiness of data, aligning LLM outputs with scientific correctness, and bridging lab-scale discovery to industrial deployment. Across each area, the most productive applications couple dispersed chemical knowledge with physics-grounded validation to produce verifiable hypotheses and actionable representations.
The purpose of this Standard is to define the requirements for a software inspection process aimed at detecting and eliminating defects as early as possible in the software life cycle. This process can be used for any documented product; however, this Standard focuses on its use for software products - i.e., software code, plans, manuals, etc. The process provides for the collection and analysis of inspection data to improve the inspection process as well as the quality of the software.
The accuracy of iterative and non-iterative strain-gage balance load calculation methods was compared using data from the calibration of a force balance. Two iterative and one non-iterative method were investigated. In addition, transformations were applied to balance loads in order to process the calibration data in both direct read and force balance format. NASA's regression model optimization tool BALFIT was used to generate optimized regression models of the calibration data for each of the three load calculation methods. This approach made sure that the selected regression models met strict statistical quality requirements. The comparison of the standard deviation of the load residuals showed that the first iterative method may be applied to data in both the direct read and force balance format. The second iterative method, on the other hand, implicitly assumes that the primary gage sensitivities of all balance gages exist. Therefore, the second iterative method only works if the given balance data is processed in force balance format. The calibration data set was also processed using the non-iterative method. Standard deviations of the load residuals for the three load calculation methods were compared. Overall, the standard deviations show very good agreement. The load prediction accuracies of the three methods appear to be compatible as long as regression models used to analyze the calibration data meet strict statistical quality requirements. Recent improvements of the regression model optimization tool BALFIT are also discussed in the paper.
Not provided.
The Plasma Contactor Units (PCUs) were developed at NASA Glenn Research Center (GRC) and Boeing for charge control on board the International Space Station (ISS). Since the first ignition of a PCU on 10/16/2000 over 3,900 hours of operation have been demonstrated on a single unit. In order to guarantee that the PCUs hollow cathode assemblies (HCAs), which emit the electrons used for charge control, would satisfy the life requirement of 18,000 hours, a ground based hollow cathode life test program was initiated at GRC. The life test program aimed at 27,000 hours of operation on a single unit to demonstrate the industry standard 1.5 times operational life requirement. As of this printing, over 18,000 hours of operation have been accumulated on a single hollow cathode. By comparing the data received from the on-orbit HCAs to the data obtained for the life test cathodes, a comparison may be drawn to determine if the on-orbit HCAs are operating normally, with a final goal of predicting lifetime. Based on the data taken thus far, it can be concluded that the on-orbit HCAs are operating within their design specifications.
A search is presented for the decay of the 125 GeV Higgs boson (H) to a pair of new light pseudoscalar bosons (a), followed by the prompt decay of each a boson to a bottom quark-antiquark pair, $ \textrm{H}\to \textrm{aa}\to \textrm{b}\overline{\textrm{b}}\textrm{b}\overline{\textrm{b}} $. The analysis is performed using a data sample of proton-proton collisions collected with the CMS detector at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb$^{−1}$. To reduce the background from standard model processes, the search requires the Higgs boson to be produced in association with a leptonically decaying W or Z boson. The analysis probes the production of new light bosons in a 15 < m$_{a}$ < 60 GeV mass range. Assuming the standard model predictions for the Higgs boson production cross sections for pp → WH and ZH, model independent upper limits at 95% confidence level are derived for the branching fraction $ \mathcal{B}\left(\textrm{H}\to \textrm{aa}\to \textrm{b}\overline{\textrm{b}}\textrm{b}\overline{\textrm{b}}\right) $. The combined WH and ZH observed upper limit on the branching fraction ranges from 1.10 for m$_{a}$ = 20 GeV to 0.36 for m$_{a}$ = 60 GeV, complementing other measurements in the μμττ, ττττ and bbℓℓ (ℓ = μ, τ) channels.[graphic not available: see fulltext]
This paper presents a 2014 status of the Society of Allied Weight Engineers' process towards becoming an Accredited Standards Developer (ASD) under certification by the United States American National Standards Institute (ANSI). Included is material from the committee's 2013 International presentation, current status, and additional general background material. The document strives to serve as a reference point to assist SAWE Recommended Practice and Standards developers in negotiating United States Standards Strategy, international standards strategy, and the association of SAWE standards and recommended practices to those efforts. Required procedures for SAWE to develop and maintain Recommended Practices and ANSI/SAWE Standards are reviewed.
Minimum Departure Interval (MDI) and Miles-In-Trail (MIT) are common traffic management tools. They both require minimum separation between departures to meet specific traffic conditions. The MDI restriction is a time separation requirement between departures, usually on the same Standard Instrument Departure (SID), whereas the MIT restriction is a distance separation requirement between aircraft, including but not limited to departure flights, to meet specific criteria associated with flight path or destination. At Incheon International Airport (IATA code: ICN) in South Korea, MDIs are imposed on 92% of departure flights. They involve specific criteria including not only having identical SID, but also satisfying other conditions, imposed on the flight path and destination. To address complicated MDI constraints, Korea Aerospace Research Institute (KARI) has been developing and improving a tactical scheduler for surface metering at ICN to provide appropriate target times for pushbacks and takeoffs for departure flights under MDIs. This paper describes the MDI requirements at ICN, the development of a heuristic scheduling algorithm to work with the MDI restrictions, and the performance evaluation of the algorithm through fast-time simulations. The performance evaluation results indicate that the proposed heuristic algorithm can provide the surface metering schedules that comply with the MDI restrictions without significant performance degradation.
The purpose of this standard is to provide an umbrella set of requirements for applying the generic architecture interface model to the design of a specific avionics hardware/software system. This standard defines a generic set of system interface points to facilitate identification of critical interfaces and establishes the requirements for applying appropriate low level detailed implementation standards to those interface points. The generic core avionics system and processing architecture models provided herein are robustly tailorable to specific system applications and provide a platform upon which the interface model is to be applied.
This document describes the training and qualification requirements for the Design Engineer (DE) position at Los Alamos National Laboratory (LANL). A Design Engineer translates design inputs into design output documents using design analysis and calculations, national codes and standards, DOE orders and standards, maintenance considerations, LANL best practices, and complex-wide lessons learned. Analysis performed by a DE requires sufficient detail in the purpose, method, assumptions, design input, references, and units such that a qualified engineer is able to review and understand the content and verify the adequacy of the results without recourse to the originator. A DE is assigned to a project by Engineering Management.
Many future space flight missions are expected to use adiabatic demagnetization refrigerators (ADRs) to reach detector operating temperatures well below one Kelvin. The goal is to operate each ADR with a mechanical cooler as its heat sink, thus avoiding the use of liquid cryogens. Although mechanical coolers are being developed to operate at temperatures of 6 Kelvin and below, there is a large efficiency cost associated with operating them at the bottom of their temperature range. For the multi-stage ADR system being developed at Goddard Space Flight Center, the goal is to operate with a 10 Kelvin mechanical cooler heat sink. With currently available paramagnetic materials, the highest temperature ADR stage in such a system will require a magnetic field of approximately three Tesla. Thus the goal is to develop a small, lightweight three Tesla superconducting magnet for operation at 10 Kelvin. It is important that this magnet have a low current/field ratio. Because traditional NbTi magnets do not operate safely above about six Kelvin, a magnet with a higher Tc is required. The primary focus has been on Nb3Sn magnets. Since standard Nb3Sn wire must be coated with thick insulation, wound on a magnet mandrel and then reacted, standard Nb,Sn magnets are quite heavy and require high currents Superconducting Systems developed a Nb3Sn wire which can be drawn down to small diameter, reacted, coated with thin insulation and then wound on a small diameter coil form. By using this smaller wire and operating closer to the wire s critical current, it should be possible to reduce the mass and operating current of 10 Kelvin magnets. Using this "react-then-wind" technology, Superconducting Systems has produced prototype 10 Kelvin magnets. This paper describes the development and testing of these magnets and discusses the outlook for including 10 Kelvin magnets on space-flight missions.
The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z series of spacesuits. The Z-2 is another step in the NASA's technology development roadmap leading to human exploration of the Martian surface. To meet a more challenging set of requirements than previous suit systems standard design features, such as threaded inserts, have been re-analyzed and improved. NASA's Z-2 prototype space suit contains several components fabricated from an advanced hybrid composite laminate consisting of IM10 carbon fiber and fiber glass. One requirement NASA levied on the suit composites was the ability to have removable, replaceable helicoil inserts to which other suit components would be fastened. An approach utilizing bonded in inserts with helicoils inside of them was implemented. The design of the interface flanges of the composites allowed some of the inserts to be a "T" style insert that was installed through the entire thickness of the laminate. The flange portion of the insert provides a mechanical lock as a redundancy to the adhesive aiding in the pullout load that the insert can withstand. In some locations it was not possible to utilize at "T" style insert and a blind insert was used instead. These inserts rely completely on the bond strength of the adhesive to resist pullout. It was determined during the design of the suit that the inserts did not need to withstand loads induced from pressure cycling but instead tension induced from torqueing the screws to bolt on hardware which creates a much higher stress on them. Bolt tension is determined by dividing the torque on the screw by a k value multiplied by the thread diameter of the bolt. The k value is a factor that accounts for friction in the system. A common value used for k for a non-lubricated screw is 0.2. The k value can go down by as much as 0.1 if the screw is lubricated which means for the same torque, a much larger tension could be placed on the bolt and insert. This paper summarizes testing that was performed to determine a k value for helicoil inserts in the Z2 suit and how the insert design was modified to resist a higher pull out tension.
Purpose: This document provides guidance on the design and analysis of a NASA Standard nondestructive evaluation (NDE) probability of detection (POD) study. A Standard NDE flaw size is considered to be conservative such that most inspectors, trained and certified in the specific NDE method, are expected to provide at least 90/95 POD for that flaw size to inspect fracture-critical hardware. Scope: This document is specifically applicable to NASA Technical Standards that establish the NDE requirements for any NASA system or component, flight or ground, where fracture control and a quantitative demonstration of POD is a requirement, including NASA-STD-5009B, Nondestructive Evaluation Requirements for Fracture-Critical Metallic Components, and NASA-STD-5019A,Fracture Control Requirements for Spaceflight Hardware.