Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Repository”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Validation study for crediting chlorine in critically analyses for spent nuclear fuel disposition - 14428

Spent nuclear fuel (SNF) management practices in the United States rely on dry storage systems that include both canister- and cask-based systems. The United States Department of Energy Used Fuel Disposition Campaign is examining the feasibility of direct disposal of dual-purpose (storage and transportation) canisters (DPCs) in a geological repository. One of the major technical challenges for direct disposal is the ability to demonstrate the subcriticality of the DPCs loaded with SNF for the repository performance period (e.g., 10,000 years or more) as the DPCs may undergo degradation over time. Specifically, groundwater ingress into the DPC (i.e., flooding) could allow the system to achieve criticality in scenarios where the neutron absorber plates in the DPC basket have degraded. However, as was shown by Banerjee et al., some aqueous species in the groundwater provide noticeable reactivity reduction for these systems. For certain amounts of particular aqueous species (e.g., chlorine, lithium) in the groundwater, subcriticality can be demonstrated even for DPCs with complete degradation of the neutron absorber plates or a degraded fuel basket configuration. It has been demonstrated that chlorine is the leading impurity, as indicated by significant neutron absorption in the water that is available in reasonable quantities for the deep geological repository media under consideration. This paper presents the results of an investigation of the available integral experiments worldwide that could be used to validate DPC disposal criticality evaluations, including credit for chlorine. Due to the small number of applicable critical configurations, validation through traditional trending analysis was not possible. The bias in the eigenvalue of the application systems due only to the chlorine was calculated using TSURFER analysis and found to be on the order of 100 percent mille (1 pcm = 10-5 k{sub eff}). This study investigated the design of a series of critical configurations with varying amounts of chlorine to address validation gaps. Such integral experiments would support the crediting of the chlorine neutron-absorption properties in groundwater and the demonstration of subcriticality for DPCs in deep geologic repositories with sufficient chlorine availability. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Coupled Thermo-Hydrological-Mechanical-Chemical Behavior of Anisotropic Granite for Geologic Disposal of High-Level Radioactive Waste: A Core-Scale Laboratory Investigation

The coupled thermo-hydrological-mechanical-chemical (THMC) behavior of rock within an Excavation Damaged Zone (EDZ) is critical for the safety and long-term performance of a geological repository for high-level radioactive wastes. While many laboratory experiments have been conducted to investigate EDZ rocks, the flow and deformation characteristics resulting from anisotropic rock textures and microcrack distribution under triaxial loading and elevated temperatures remain poorly understood. Particularly, cracks at various scales serve as fast paths for fluid flow and solute transport and present as focal points of mechanical weakness, which complicate the coupled THMC processes in anisotropic EDZ rocks and challenge modeling predictions. Here, in this study, a series of core-scale experiments was conducted on three granite samples under repository-relevant conditions. These rock samples were obtained from the Grimsel Underground Research Laboratory (URL), featured by anisotropic minerals (represented by bedding layers) and microcrack distributions and coarse cm-scale grain sizes. During the experiments, samples were subjected to an elevated temperature at 90 °C and different triaxial loading conditions either by radial (normal to bedding layers) or axial (parallel to bedding layers) compaction. Water was injected into the samples, and the rock permeability evolutions and effluent water chemistry were monitored closely. For intact samples, thermal expansion of minerals at 90 °C resulted in a large, 75% irreversible permeability reduction and rock strengthening under radial compaction, while thermal impact was limited to a 15% permeability reduction under axial compaction. In contrast, for a sample containing open cracks, the growth of fractures during the experiment resulted in an abrupt permeability increase and fast failure at 90 °C. The effluent water chemistry indicates much more considerable mineral dissolution from large shear sliding than that in rocks dominated by mechanical compaction. These results helped better understand the coupled THMC processes in anisotropic rocks containing cracks, evaluate the behaviors of EDZ rocks, and predict the long-term evolution of EDZ for the performance of the repositories.

Coupled THMC processes↗
DOE OSTI2018

Micromechanical processes in consolidated granular salt

Here, granular salt is likely to be used as backfill material and a seal system component within geologic salt formations serving as a repository for long-term isolation of nuclear waste. Pressure from closure of the surrounding salt formation will promote consolidation of granular salt, eventually resulting in properties comparable to native salt. Understanding dependence of consolidation processes on stress state, moisture availability, temperature, and time is important for demonstrating sealing functions and long-term repository performance. This study characterizes laboratory-consolidated granular salt by means of microstructural observations. Granular salt material from mining operations was obtained from the bedded Salado Formation hosting the Waste Isolation Pilot Plant and the Avery Island salt dome. Laboratory test conditions included hydrostatic consolidation of jacketed granular salt with varying conditions of confining isochoric stress to 38 MPa, temperature to 250 °C, moisture additions of 1% by weight, time duration, and vented and non-vented states. Resultant porosities ranged between 1% and 22%. Optical and scanning electron microscopic techniques were used to ascertain consolidation mechanisms. From these investigations, samples with 1% added moisture or unvented during consolidation, exhibit clear pressure solution processes with tightly cohered grain boundaries and occluded fluid pores. Samples with only natural moisture content consolidated by a combination of brittle, cataclastic, and crystal plastic deformation. Recrystallization at 250 °C irrespective of moisture conditions was also observed. The range and variability of conditions applied in this study, combined with the techniques used to display microstructural features, are unique, and provide insight into an important area of governing deformation mechanism(s) occurring within salt repository applications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Thermal loading effects on chalk hydromechanical behavior for nuclear waste disposal

Safe disposal of heat-generating nuclear waste depends on host rock stability under thermal, hydrological, and mechanical stresses. This study investigates the effect of thermal loading on mechanical behavior of the shallowly buried Ghareb formation chalk through triaxial and hydrostatic constant strain rate and creep tests at temperatures up to 100 ˚C and effective pressures up to 20.7 MPa. Experimental results show that thermal loading reduces the elastic moduli of chalk by 50–75%, and a transition occurs above 60 ˚C where creep rates increase rapidly. Water saturation nearly doubles the thermally induced strain compared to dry conditions and strongly decreases material rigidity. Thermal loading also leads to significant pore pressure increases under undrained conditions and leads to reductions in the apparent permeability during drained conditions. Laboratory experimental data were used to parameterize and develop a preliminary constitutive model for predicting future deformation during repository operations in the Ghareb. The strongly coupled effects – mechanical weakening, fluid pressure fluctuations, and permeability modification – demonstrate that elevated repository temperatures will have a pronounced effect on the near field Ghareb behavior during waste disposal operations. The findings indicate that the coupled interactions must be considered in predictive models and repository design to ensure long-term nuclear waste isolation and safety.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Assessing the Consequences of Postclosure Criticality in Spent Nuclear Fuel

The U.S. Department of Energy is funding research into studying the consequences of postclosure criticality on the performance of a generic repository by (1) identifying the features, events, and processes (FEPs) that need to be considered in such an analysis, (2) developing the tools needed to model the relevant FEPs in a postclosure performance assessment, and (3) conducting analyses both with and without the occurrence of a postclosure criticality and comparing the results. Here, this paper describes progress in this area of research and presents the results to date of analyzing the consequences of a postulated steady-state criticality in a hypothetical saturated shale repository. Preliminary results indicate that postclosure criticality would not affect repository performance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Data from: “Enabling FAIR data in Earth and environmental science with community-centric (meta)data reporting formats”

This dataset contains supplementary information for a manuscript describing the ESS-DIVE (Environmental Systems Science Data Infrastructure for a Virtual Ecosystem) data repository's community data and metadata reporting formats. The purpose of creating the ESS-DIVE reporting formats was to provide guidelines for formatting some of the diverse data types that can be found in the ESS-DIVE repository. The 6 teams of community partners who developed the reporting formats included scientists and engineers from across the Department of Energy National Lab network. Additionally, during the development process, 247 individuals representing 128 institutions provided input on the formats. The primary files in this dataset are 10 data and metadata crosswalk for ESS-DIVE’s reporting formats (all files ending in _crosswalk.csv). The crosswalks compare elements used in each of the reporting formats to other related standards and data resources (e.g., repositories, datasets, data systems). This dataset also contains additional files recommended by ESS-DIVE’s file-level metadata reporting format. Each data file has an associated dictionary (files ending in _dd.csv) which provide a brief description of each standard or data resource consulted in the data reporting format development process. The flmd.csv file describes each file contained within the dataset.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Regional Geologic Evaluations for Disposal of HLW and SNF: The Pierre Shale of the Northern Great Plains

The DOE Spent Fuel and Waste Technology (SWFT) R&D Campaign is supporting research on crystalline rock, shale (argillite) and salt as potential host rocks for disposal of HLW and SNF in a mined geologic repository. The distribution of these three potential repository host rocks is limited to specific regions of the US and to different geologic and hydrologic environments (Perry et al., 2014), many of which may be technically suitable as a site for mined geologic disposal. This report documents a regional geologic evaluation of the Pierre Shale, as an example of evaluating a potentially suitable shale for siting a geologic HLW repository. This report follows a similar report competed in 2016 on a regional evaluation of crystalline rock that focused on the Superior Province of the north-central US (Perry et al., 2016).

58 GEOSCIENCES↗
DOE OSTI2022

Applying 3D Geologic Modeling Workflows to the Argillite Reference Case (Rev. 1)

The objective of this short report is to document the application of our 3D geologic modeling workflow to an argillite (shale) host rock. Over the past four years, our team at Los Alamos National Laboratory has developed a geologic modeling workflow that can be applied to generic alluvial basins such as those found in the western United States. In “frontier” or “exploratory” basins where data are sparse, the first steps are to collect, evaluate and integrate available subsurface data into conceptual geologic models. Those models form the basis for constructing the geologic framework model, a 3D geocellular model ideally constrained by seismic and borehole data. To date we have constructed our models using “synthetic” well data derived from conceptual models, without the prospect of validating our workflow using “real” subsurface data. We were tasked to investigate whether our workflow designed for alluvial basin sediments could be applied to other potential repository host rocks. This task also provided the opportunity to work with high-quality subsurface data collected specifically for siting and evaluating a nuclear waste repository. Nagra, the Swiss governmental agency responsible for the disposal of the nation’s radioactive waste, generously provided us with data from two deep boreholes drilled through their argillaceous target formation. The aim of our proof-of-concept demonstration is to evaluate whether geostatistical methods offer a viable approach to property modeling in argillaceous rocks. Nagra provided us with the well data on the condition that we maintain confidentiality with all transferred information and results. Fortunately, Nagra posts numerous technical reports on its public website that describe the subsurface geology in great detail. All of the information and illustrations in this report related to the Swiss repository enterprise are taken from the Nagra public website.

58 GEOSCIENCES↗
DOE OSTI2021

Linear and Nonlinear Solvers for Simulating Multiphase Flow within Large-Scale Engineered Subsurface Systems

Simulation of multiphase flow in the subsurface is well-known to be computationally challenging. While there have been many studies that have explored approaches to overcoming these challenges, they often utilize relatively simple case studies. In this paper, we focus on the unique numerical challenges posed by modeling large-scale engineered subsurface systems, characterized by discrete features embedded in a heterogeneous natural subsurface setting. The man-made features such as shafts, tunnels, and barriers often cause multiple challenges in modeling the domain for multiphase porous media flow. This flow scenario can have a wide range of applications such as nuclear waste repositories, enhanced recovery of a petroleum reservoir, geothermal engineering, and carbon sequestration. An example of these severe numerical challenges is the case of performance assessment (PA) for Waste Isolation Pilot Plant (WIPP), the only operating deep geological repository in the US, which simulates extreme material properties of bedded salt rock formation and extreme contrast due to open excavation next to the formation. The models have extremes not only of permeability and porosity but also of the constitutive models needed for multiphase flow; additionally, they have process models like salt creep closure reducing porosity over time, fracturing in clay and anhydrite interbeds of the bedded salt, gas generation from the waste materials, and unintentional human borehole intrusions in some scenarios. Numerical simulations require the solution of coupled systems of nonlinear PDEs; in our work, we use the open-source simulator PFLOTRAN which is based on Finite Volume discretization. The solution of the nonlinear equations requires use of the Newton-Raphson iteration at each time step, which entails the solution of the linearized Jacobian system at each iteration. The effects of all the processes (i.e., large number of unknowns, highly nonlinear constitutive relations, large contrasts in material properties in short distances) lead to an ill-conditioned Jacobian matrix that severely challenges traditional linear solver, i.e., stabilized biconjugate gradient with block Jacobi incomplete LU preconditioner (BCGS-ILU) leading to non-convergence for traditional Newton-Raphson nonlinear solver causing unacceptably long computation time for each model. This paper presents linear solvers such as constrained pressure residual (CPR) two-stage preconditioner with alternate-block-factorization (ABF) and quasi- implicit pressure and explicit saturation (QIMPES) decouplers and flexible generalized residual solver (FGMRES). The new general-purpose nonlinear solver, Newton trust-region dogleg Cauchy (NTRDC), is also introduced to resolve extreme nonlinearities in the models. We demonstrate the effectiveness of each method relative to the default BCGS-Newton solver. The two best cases had nearly 50 times speed-up and achieved completion of a simulation in 14 hours that never completed due to non-convergence with the default solver. We also investigate the strong scalability of each method and discuss some of the deficiencies found for Block Jacobi preconditioner using parallel domain decomposition, and node packing effects of modern processor architecture.

Preconditioner, Nonlinear, Porous media, Multiphas↗
DOE OSTI2025

Incorporating geological structure into sensitivity analysis of subsurface contaminant transport

Simulating subsurface contaminant transport at the kilometer-scale often entails modeling reactive flow and transport within and through complex geologic structures. These structures are typically meshed by hand and as a result geologic structure is usually represented by one or a few deterministically generated geological models for uncertainty studies of flow and transport in the subsurface. Uncertainty in geologic structure can have a significant impact on contaminant transport. In this study, the impact of geologic structure on contaminant tracer transport in a shale formation is investigated for a simplified generic deep geologic repository for permanent disposal of spent nuclear fuel. An open-source modeling framework is used to perform a sensitivity analysis study on transport of two tracers from a generic spent nuclear fuel repository with uncertain location of the interfaces between the stratum of the geologic structure. The automated workflow uses sampled realizations of the geological structural model in addition to uncertain flow parameters in a nested sensitivity analysis. Concentration of the tracers at observation points within, in line with, and downstream of the repository are used as the quantities of interest for determining model sensitivity to input parameters and geological realization. Finally, the results of the study indicate that the location of strata interfaces in the geological structure has a first-order impact on tracer transport in the example shale formation, and that this impact may be greater than that of the uncertain flow parameters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Solubility constants of hydroxyl sodalite at elevated temperatures evaluated from hydrothermal experiments: Applications to nuclear waste isolation

In this study, solubility constants of hydroxyl sodalite (ideal formula, Na 8 [Al 6 Si 6 O 24 ][OH] 2 ·3H 2 O) from 25°C to 100°C are obtained by applying a high temperature Al—Si Pitzer model to evaluate solubility data on hydroxyl sodalite in high ionic strength solutions at elevated temperatures. A validation test comparing model-independent experimental data to model predictions demonstrates that the solubility values produced by the model are in excellent agreement with the experimental data. In addition, the equilibrium constants obtained in this study have a wide range of applications, including synthesis of hydroxyl sodalite, de-silication in the Bayer process for extraction of alumina, and the performance of proposed sodalite waste forms in geological repositories in various lithologies including salt formations. The thermodynamic calculations based on the equilibrium constants obtained in this work indicate that the solubility products in terms of m ΣAl ×m ΣSi for hydroxyl sodalite are very low (e.g., ~10 -13 [mol·kg -1 ] 2 at 100°C) in brines characteristic of salt formations, implying that sodalite waste forms would perform very well in repositories located in salt formations. Finally, the information regarding the solubility behavior of hydroxyl sodalite obtained in this study provides guidance to investigate the performance of other pure end-members of sodalite such as chloride- and iodide-sodalite, which may be of interest for geological repositories in various media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Integration among databases and data sets to support productive nanotechnology: Challenges and recommendations

This work is one of a series of articles by the Nanomaterial Data Curation Initiative. Other articles in this series discuss data curation workflows, data completeness and quality, curator responsibilities, and metadata. Many groups within the broad nanotechnology field are already developing data repositories and tools driven by their individual organizational goals. Integrating these data across disciplines, and with other non-nanotechnology resources, can support multiple objectives by reusing the same information, and can serve as the impetus for novel scientific discoveries through deeper data analyses. Based on the results of a community-based survey of organizations that maintain nanomaterial repositories, this article discusses current data integration practices in nanoinformatics and mature fields such as genomics, as well as nanotechnology-specific challenges impacting data integration. Recommendations for achieving integration of existing operational nanotechnology resources, as based on results from a community-wide survey, are presented herein. Nanotechnology-specific data integration challenges, if effectively resolved, can foster the application and validation of nanotechnology within and across disciplines.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2014

Krypton-81 in groundwater of the Culebra Dolomite near the Waste Isolation Pilot Plant, New Mexico

TheWaste Isolation Pilot Plant (WIPP) in New Mexico is the first geologic repository for disposal of transuranic nuclear waste fromdefense-related programs of the US Department of Energy. It is constructed within halite beds of the Permian-age Salado Formation. The Culebra Dolomite, confined within Rustler Formation evaporites overlying the Salado Formation, is a potential pathway for radionuclide transport from the repository to the accessible environment in the human-disturbed repository scenario. Although extensive subsurface characterization and numerical flow modeling of groundwater has been done in the vicinity of theWIPP, few studies have used natural isotopic tracers to validate the flow models and to better understand solute transport at this site. The advent of Atom-Trap Trace Analysis (ATTA) has enabled routine measurement of cosmogenic 81Kr (half-life 229,000 yr), a near-ideal tracer for long-term groundwater transport. We measured 81Kr in saline groundwater sampled from two Culebra Dolomite monitoring wells near the WIPP site, and compared 81Kr model ages with reverse particle-tracking results of well-calibrated flow models. The 81Kr model ages are ~130,000 and ~330,000 yr for high-transmissivity and low-transmissivity portions of the formation, respectively. Compared with flow model results which indicate a relatively young mean hydraulic age (~32,000 yr), the 81Kr model ages imply substantial physical attenuation of conservative solutes in the Culebra Dolomite and provide limits on the effective diffusivity of contaminants into the confining aquitards.

Sturchio, Neil C.↗
DOE OSTI2023

Radionuclide transport in fractured chalk under abrupt changes in salinity

Internationally, it has been agreed that geologic repositories for spent fuel and radioactive waste are considered the internationally agreed upon solution for intermediate and long-term disposal. In countries where traditional nuclear waste repository host rocks (e.g., clay, salt, granite) are not available, other low permeability lithologies must be studied. Here, chalk is considered to determine its viability for disposal. Despite chalk's low bulk permeability, it may contain fracture networks that can facilitate radionuclide transport. In arid areas, groundwater salinity may change seasonally due to the mixing between brackish groundwater and fresh meteoric water. Such salinity changes may impact the radionuclides' mobility. In this study, radioactive U(VI) and radionuclide simulant tracers (Sr, Ce and Re) were injected into a naturally fractured chalk core. The mobility of tracers was investigated under abrupt salinity variations. Two solutions were used: a low ionic strength (IS) artificial rainwater (ARW; IS ~0.002) and a high IS artificial groundwater (AGW; IS ~0.2). During the experiments, the tracers were added to ARW, then the carrier was changed to AGW, and vice versa. Ce was mobile only in colloidal form, while Re was transported as a conservative tracer. Both Re and Ce demonstrated no change in mobility due to salinity changes. In contrast, U and Sr showed increased mobility when AGW was introduced and decreased mobility when ARW was introduced into the core. These experimental results, supported by reactive transport modeling, suggest that saline groundwater solutions promote U and Sr release via ion-exchange and enhance their migration in fractured chalk. Here the study emphasizes the impact of salinity variations near spent fuel repositories and their possible impact on radionuclide mobility.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2015

Charge-Coupled Substituted Garnets (Y 3-x Ca 0.5x M 0.5x )Fe 5 O 12 (M = Ce, Th): Structure and Stability as Crystalline Nuclear Waste Forms

The garnet structure has been proposed as a potential crystalline nuclear waste form for accommodation of actinide elements, especially uranium (U). In this study, yttrium iron garnet (YIG) as a model garnet host was studied for the incorporation of U analogs, cerium (Ce) and thorium (Th), incorporated by a charge-coupled substitution with calcium (Ca) for yttrium (Y) in YIG, namely, 2Y 3+ = Ca 2+ + M 4+ , where M 4+ = Ce 4+ or Th 4+ . Single-phase garnets Y 3–x Ca 0.5x M 0.5x Fe 5 O 12 (x = 0.1–0.7) were synthesized by the citrate–nitrate combustion method. Ce was confirmed to be tetravalent by X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. X-ray diffraction and 57 Fe–Mössbauer spectroscopy indicated that M 4+ and Ca 2+ cations are restricted to the c site, and the local environments of both the tetrahedral and the octahedral Fe 3+ are systematically affected by the extent of substitution. The charge-coupled substitution has advantages in incorporating Ce/Th and in stabilizing the substituted phases compared to a single substitution strategy. Enthalpies of formation of garnets were obtained by high temperature oxide melt solution calorimetry, and the enthalpies of substitution of Ce and Th were determined. The thermodynamic analysis demonstrates that the substituted garnets are entropically rather than energetically stabilized. This suggests that such garnets may form and persist in repositories at high temperature but might decompose near room temperature.

Guo, Xiaofeng↗
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 2. Quantitative Moisture Dynamics Estimation Model

Abstract The long‐term containment of high‐level radioactive waste in geological disposal repositories relies on Engineered Barrier Systems (EBS), with bentonite clay emerging as a candidate material due to its unique properties. Understanding moisture dynamics within bentonite buffers is crucial for EBS performance, as it directly influences the material's swelling capacity, thermal and hydraulic conductivity, mechanical properties, and long‐term evolution under complex thermal‐hydrological‐mechanical (THM) processes. This study develops an advanced Electrical Resistivity Tomography (ERT)‐based framework to quantitatively monitor moisture dynamics under THM conditions. Our framework extends the Waxman‐Smits model to incorporate the coupled effects of temperature, water content, fluid chemistry, and mechanical changes on bentonite's electrical properties. Utilizing HotBENT‐Lab data from our companion paper, which includes electrical conductivity, CT density, and thermocouple measurements, this study offers a novel methodological framework bridging different scales of the model. Our results show that the extended model can estimate water content from ERT data, capturing spatial and temporal variations in moisture distribution within bentonite columns. However, the model tends to overestimate water content compared to CT density‐derived measurements. We address this discrepancy by incorporating a simplified swelling effect model, which improves agreement between ERT and CT density‐based water content estimates. We also discuss model limitations, including simplified treatment of swelling and micropore effects, and propose a conceptual framework for transitioning from laboratory to field applications, addressing challenges such as parameter scalability, field validation methods, and integration of diverse data sources. This ERT‐based framework can potentially advance real‐world moisture monitoring of bentonite‐based EBS in nuclear waste repositories. Plain Language Summary Safely containing high‐level radioactive waste depends on barriers made from materials like bentonite clay, which is effective because it swells and seals in the waste. To ensure these barriers work well over time, it's important to understand how moisture moves through the clay. Our study developed a new method using ERT to monitor moisture levels in bentonite under conditions that mimic those in actual storage sites, including changes in temperature, water content, and mechanical stress. This study improved an existing model to better account for how these factors affect the clay, allowing us to create more accurate moisture maps. Initially, the proposed model overestimated the amount of water in the clay, but its accuracy was improved by factoring in how the clay swells when wet. This study also identified some limitations of the model and suggested ways to adapt it for use in real‐world waste storage sites. This new approach could lead to better monitoring and safety checks for nuclear waste storage systems, helping to ensure long‐term containment. Key Points This work develops an ERT‐based framework extending the Waxman‐Smits model to monitor bentonite moisture dynamics during coupled THM processes The extended model accurately estimates water content from Electrical Resistivity Tomography data, incorporating swelling effects to improve precision This work proposes a conceptual framework for transitioning from laboratory to field applications, advancing EBS monitoring in nuclear waste repositories

Chen, Hang↗
DOE OSTI2020

Active sulfur cycling in the terrestrial deep subsurface

The deep terrestrial subsurface remains an environment where there is limited understanding of the extant microbial metabolisms. At Olkiluoto, Finland, a deep geological repository is under construction for the final storage of spent nuclear fuel. It is therefore critical to evaluate the potential impact microbial metabolism, including sulfide generation, could have upon the safety of the repository. As such, we investigated a deep groundwater where sulfate is present, but groundwater geochemistry suggests limited microbial sulfate-reducing activity. Examination of the microbial community at the genome-level revealed microorganisms with the metabolic capacity for both oxidative and reductive sulfur transformations. Deltaproteobacteria are shown to have the genetic capacity for sulfate reduction and possibly sulfur disproportionation, while Rhizobiaceae, Rhodocyclaceae, Sideroxydans, and Sulfurimonas oxidize reduced sulfur compounds. Further examination of the proteome confirmed an active sulfur cycle, serving for microbial energy generation and growth. Our results reveal that this sulfide-poor groundwater harbors an active microbial community of sulfate-reducing and sulfide-oxidizing bacteria, together mediating a sulfur cycle that remained undetected by geochemical monitoring alone. The ability of sulfide-oxidizing bacteria to limit the accumulation of sulfide was further demonstrated in groundwater incubations and highlights a potential sink for sulfide that could be beneficial for geological repository safety.

58 GEOSCIENCES↗