Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reanalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Advancing cloud lifecycle representation in numerical models using innovative analysis methods that bridge arm observations over a breadth of scales

From its location on the subtropics-midlatitude boundary, the Azores is influenced by both the subtropical high pressure and the midlatitude baroclinic storm regimes, and therefore experiences a wide range of cloud structures, from fair-weather scenes to stratocumulus sheets to deep convective systems. This project combined three types of data sets to study cloud variability in the Azores: a satellite analysis of cloud regimes, a reanalysis characterization of storminess, and a 19-month field campaign that occurred on Graciosa Island. Combined analysis of the three data sets provides a detailed picture of cloud variability and the respective dynamic influences, with emphasis on low clouds that constitute a major uncertainty source in climate model simulations. The satellite cloud regime analysis shows that the Azores cloud distribution is similar to the mean global distribution and can therefore be used to evaluate cloud simulation in global models. Regime analysis of low clouds shows that stratocumulus decks occur under the influence of the Azores high-pressure system, while shallow cumulus clouds are sustained by cold-air outbreaks, as revealed by their preference for post-frontal environments and northwesterly flows. An evaluation of CMIP5 climate model cloud regimes over the Azores shows that all models severely underpredict shallow cumulus clouds, while most models also underpredict the occurrence of stratocumulus cloud decks. It is demonstrated that carefully selected case studies can be related through regime analysis to climatological cloud distributions, and a methodology is suggested utilizing process-resolving model simulations of individual cases to better understand cloud-dynamics interactions and attempt to explain and correct climate model cloud deficiencies.

58 GEOSCIENCES↗

Establishing precision and accuracy in PDV results

We need to know uncertainties and systematic errors because we create and compare against archival weapons data, we constrain the models, and we provide scientific results. Good estimates of precision from the data record are available and should be incorporated into existing results; reanalysis of valuable data is suggested. Estimates of systematic errors are largely absent. The original work by Jensen et al. using gun shots for window corrections, and the integrated velocity comparison with X-rays by Schultz are two examples where any systematic errors appear to be <1% level.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Development of a MODIS-Derived Surface Albedo Data Set: An Improved Model Input for Processing the NSRDB

A significant source of bias in the transposition of global horizontal irradiance to plane-of-array (POA) irradiance arises from inaccurate estimations of surface albedo. The current physics-based model used to produce the National Solar Radiation Database (NSRDB) relies on model estimations of surface albedo from a reanalysis climatalogy produced at relatively coarse spatial resolution compared to that of the NSRDB. As an input to spectral decomposition and transposition models, more accurate surface albedo data from remotely sensed imagery at finer spatial resolutions would improve accuracy in the final product. The National Renewable Energy Laboratory (NREL) developed an improved white-sky (bi-hemispherical reflectance) broadband (0.3-5.0 ..mu..m) surface albedo data set for processing the NSRDB from two existing data sets: a gap-filled albedo product and a daily snow cover product. The Moderate Resolution Imaging Spectroradiometer (MODIS) sensors onboard the Terra and Aqua satellites have provided high-quality measurements of surface albedo at 30 arc-second spatial resolution and 8-day temporal resolution since 2001. The high spatial and temporal resolutions and the temporal coverage of the MODIS sensor will allow for improved modeling of POA irradiance in the NSRDB. However, cloud and snow cover interfere with MODIS observations of ground surface albedo, and thus they require post-processing. The MODIS production team applied a gap-filling methodology to interpolate observations obscured by clouds or ephemeral snow. This approach filled pixels with ephemeral snow cover because the 8-day temporal resolution is too coarse to accurately capture the variability of snow cover and its impact on albedo estimates. However, for this project, accurate representation of daily snow cover change is important in producing the NSRDB. Therefore, NREL also used the Integrated Multisensor Snow and Ice Mapping System data set, which provides daily snow cover observations of the Northern Hemisphere for the temporal extent of the NSRDB (1998-2015). We provide a review of validation studies conducted on these two products and describe the methodology developed by NREL to remap the data products to the NSRDB grid and integrate them into a seamless daily data set.

14 SOLAR ENERGY↗

Final DOE-ASR Report for the Project “Advancing our Understanding and the Remote Sensing of Ice Clouds”

This project has evolved during its execution, and what follows are the key project findings. This project has arguably provided the first global view of how cirrus cloud (defined as having cloud base temperature T < 235 K) nucleation physics (evaluated through satellite retrievals of ice particle number concentration Ni, effective diameter De and ice water content IWC) evolves with the seasons for a given temperature, latitude zone and surface type (e.g. ocean vs. land), based on a new satellite remote sensing method developed for this project. The retrieval method is unique in that it is very sensitive to the small ice crystals that govern the number concentration Ni, allowing Ni to be retrieved. The method currently samples single-layer cirrus clouds having visible optical depth ranging from about 0.3 to 3.0, using co-located observations from the Infrared Imaging Radiometer (IIR) and from the CALIOP (Cloud and Aerosol Lidar with Orthogonal Polarization) lidar aboard the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) polar orbiting satellite, employing IIR channels at 10.6 μm and 12.05 μm. Retrievals of Ni are primarily used to estimate the cirrus cloud formation mechanism; that is, either homo- or heterogeneous ice nucleation (henceforth hom and het). This is possible since, in general, hom produces more than an order of magnitude more ice crystals than does het. Thus the retrievals provide insight on how these mechanisms change with the seasons for a given latitude zone or region, based on the years 2008 and 2013. Using a conservative criterion for hom cirrus, on average, the sampled cirrus clouds formed through hom occur about 43% of the time in the Arctic and 50% of the time in the Antarctic, and during winter at mid-latitudes in the Northern Hemisphere, hom cirrus occur 37% of the time. Elsewhere (and during other seasons in the Northern Hemisphere mid-latitudes), this hom cirrus fraction is lower, and it is lowest in the tropics. Thus, the microphysical properties of cirrus clouds in the Polar Regions are much different than they are in the tropics; something unknown prior to this study. Moreover, the frequency of cirrus cloud occurrence in the Polar Regions varies strongly with season, peaking during winter in the Arctic and during spring in the Antarctic. Considering these seasonal changes in microphysics and inferred cloud coverage, this leads us to speculate that the buildup of Arctic cirrus during winter may significantly contribute to tropospheric heating in that region, possibly affecting winter jet-stream dynamics and mid-latitude weather patterns through the thermal-wind balance relationship. This cirrus cloud research provides essential guidance for realistically representing cirrus clouds in climate models; guidance previously unavailable. For example, mid-latitude hom cirrus were widespread during winter over or nearby mountainous terrain, evidently due to mountain-induced waves that produce strong updrafts at cirrus cloud levels. The treatment of turbulent mountain stress and gravity waves will likely need to be improved in climate models in order to adequately represent cirrus clouds outside the tropics. Another goal of this project was to develop a ground-based 94-GHz radar retrieval for winter snowstorms, based on (1) an improved analytical framework describing the interaction of radiation from radar with snowfall and (2) the development of a steady-state snow growth model that predicts the height-evolution of the ice particle size distribution through ice particle growth by vapor diffusion, aggregation and riming (i.e. the growth of snow through collisions with supercooled cloud droplets). Although activities (1) and (2) were completed, there was insufficient time to test and finalize the radar retrieval scheme. However, activity (2) provided a new method for relating ice particle mass “m” and projected area “A” to the ice particle maximum dimension “D”. The ice cloud microphysical processes (which determine ice cloud radiative properties) in climate models are parameterized in terms of these m-D and A-D relationships. By improving these relationships, the ice cloud radiative properties in Community Atmosphere Model version 5, or CAM5 (an atmosphere global climate model, or GCM) were improved. Student funding from the University of Nevada, Reno, was combined with funds from this project to conduct some basic research on the mechanism of the North American monsoon, or NAM. Federal research on the NAM has dwindled since 2006, but atmospheric soundings taken during research vessel cruises in the Gulf of California (GC) during the North American Monsoon Experiment (NAME) were used to reveal a likely mechanism that explains the relationship between an intrusion of tropical warm water into the GC during late spring-early summer and the onset of relatively heavy NAM rainfall in northwest Mexico and the southwestern United States. These soundings, combined with reanalysis data, satellite sea surface temperatures and satellite measurements of outgoing longwave radiation were used to develop and provide evidence for a planetary-scale NAM mechanism. As far as we know, no other physical explanation has been offered for the spring-summer evolution of the NAM system.

54 ENVIRONMENTAL SCIENCES↗

An Improved Global Wind Resource Estimate for Integrated Assessment Models: Preprint

This paper summarizes initial steps to improving the robustness and accuracy of global renewable resource and techno-economic assessments for use in integrated assessment models. We outline a method to construct country-level wind resource supply curves, delineated by resource quality and other parameters. Using mesoscale reanalysis data, we generate estimates for wind quality, both terrestrial and offshore, across the globe. Because not all land or water area is suitable for development, appropriate database layers provide exclusions to reduce the total resource to its technical potential. We expand upon estimates from related studies by: using a globally consistent data source of uniquely detailed wind speed characterizations; assuming a non-constant coefficient of performance for adjusting power curves for altitude; categorizing the distance from resource sites to the electric power grid; and characterizing offshore exclusions on the basis of sea ice concentrations. The product, then, is technical potential by country, classified by resource quality as determined by net capacity factor. Additional classifications dimensions are available, including distance to transmission networks for terrestrial wind and distance to shore and water depth for offshore. We estimate the total global wind generation potential of 560 PWh for terrestrial wind with 90% of resource classified as low-to-mid quality, and 315 PWh for offshore wind with 67% classified as mid-to-high quality. These estimates are based on 3.5 MW composite wind turbines with 90 m hub heights, 0.95 availability, 90% array efficiency, and 5 MW/km2 deployment density in non-excluded areas. We compare the underlying technical assumption and results with other global assessments.

17 WIND ENERGY↗

Comparison of the Three NIF Ablators

Indirect drive implosion experiments on NIF have now been performed using three different ablator materials: glow discharge polymer (GDP) or CH, high density carbon (HDC, which we also refer to as diamond), and sputtered beryllium (Be). It has been appreciated for some time that each of these materials has specific advantages and disadvantages as an ICF ablator.[1-4] In light of experiments conducted on NIF in the last few years, how do these ablators compare? Given current understanding, is any ablator more or less likely to reach ignition on NIF? Has the understanding of their respective strengths and weaknesses changed since NIF experiments began? How are those strengths and weaknesses highlighted by implosion designs currently being tested or planned for testing soon? This document aims to address these questions by combining modern simulation results with a survey of the current experimental data base. More particularly, this document is meant to fulfill an L2 Milestone for FY17 to “Document our understanding of the relative advantages and disadvantages of CH, HDC, and Be designs.” Note that this document does not aim to recommend a down-selection of the current three ablator choices. It is intended only to gather and document the current understanding of the differences between these ablators and thereby inform the choices made in planning future implosion experiments. This document has two themes: (i) We report on a reanalysis project in which post-shot simulations were done on a common basis for layered shots using each ablator. This included data from keyholes, 2D ConA, and so forth, from each campaign, leading up to the layered shots. (“Keyholes” are shots dedicated to measuring the shock timing in a NIF target, as described in Ref. 5. “2DConAs” are backlit implosions in which the symmetry of the implosion is measured between about half and full convergence, as described in Ref. 6.) This set of common-basis postshot simulations is compared to the respective shots. Each was then scaled to a “full NIF” experiment that could be done using the respective ablators at full NIF power and/or energy, and these scaled-up designs were simulated in detail. (ii) The report also contains a general survey of experimental and simulated results as pertinent to comparing and evaluating the three ablators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Methodology for Yield Determination of Surface Shots Over Water

Shockwave analysis is one of the few methods used to determine the yield of a nuclear detonation. It has been noted that the shockwave of these surface shots over water are asymmetric making accurate yield determination difficult. To calculate the yield of these shots more accurately, reanalysis of these films is required. Armed with the digitized replicas of the original nuclear test films and the latest image processing tools, a methodology for segmenting the shockwave from the digitized film and measuring these shockwaves is devised to quickly and accurately quantify the shape of these asymmetric shockwaves. With a two-dimensional result from these asymmetric shockwaves, several methods are discussed to transform the final shockwave contour to a scalar value which can be used in existing yield determination equations.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DE-NE0008277_PROTEUS final technical report 2018

This project details re-evaluations of experiments of gas-cooled fast reactor (GCFR) core designs performed in the 1970s at the PROTEUS reactor and create a series of International Reactor Physics Experiment Evaluation Project (IRPhEP) benchmarks. Currently there are no gas-cooled fast reactor (GCFR) experiments available in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook). These experiments are excellent candidates for reanalysis and development of multiple benchmarks because these experiments provide high-quality integral nuclear data relevant to the validation and refinement of thorium, neptunium, uranium, plutonium, iron, and graphite cross sections. It would be cost prohibitive to reproduce such a comprehensive suite of experimental data to support any future GCFR endeavors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Building and Running TDAAPS Models: WRF Postdictions

This document serves to guide a researcher through the process of running the Weather Research and Forecasting (WRF) model and incorporating observations into coarse resolution reanalysis products to model atmospheric conditions at high (50 m) resolution. This documentation is specific to WRF and the WRF Preprocessing System (WPS) version 3.8.1 and the Objective Analysis (OBSGRID) code released on April 8, 2016. Output from WRF serves as an input into the Time-Domain Atmospheric Acoustic Propagation Suite (TDAAPS) which performs staggered-grid finite difference modeling of the acoustic velocity pressure system to produce Green's functions through these atmospheric models.

54 ENVIRONMENTAL SCIENCES↗

Off-Gas Condensate and Cast Stone Analysis Results

A sample of off-gas condensate produced during a demonstration test of the direct-feed low-activity waste (DFLAW) Radioactive Waste Test Platform using waste retrieved from Hanford storage tank AP-105 waste was analyzed for major cations, anions, total cyanide, Resource Conservation and Recovery Act (RCRA) metals, selected radionuclides, and selected organic compounds. The remaining off-gas condensate was concentrated through evaporation and then used to produce Cast Stone waste forms. After the solid waste forms cured for 28 days, U.S. Environmental Protection Agency (EPA) Method 1311 (EPA 1992) Toxicity Characteristic Leach Procedure (TCLP) tests were conducted on two samples. The TCLP leachates were analyzed for RCRA metals, fluoride, and total cyanide. These chemical analyses were conducted to collect data on the waste form performance and to determine if the waste form will meet the disposal requirements of the Waste Control Specialists LLC (WCS) Federal Waste Disposal Facility (FWF) in Texas (WCS 2015) and the Integrated Disposal Facility at Hanford. The radionuclide results in the off-gas condensate were used to estimate concentrations in the Cast Stone waste forms; these estimates were then compared to Class C limits (30 TAC 336.362 Appendix E). With the possible exception of U-232, all measured radionuclides were determined to be below their respective Class C limits. Inductively coupled plasma-mass spectrometry (ICP-MS) was used to measure most of the radionuclides. It is not possible to differentiate the isotope measured at mass 232 between U 232 and Th-232 by mass spectroscopy. Class C limit comparisons were made by assuming two maximum possible scenarios; one in which all the isotope at mass 232 occurred as Th-232, and another assigning the entire mass contribution to U-232. If the isotope at mass 232 is all Th-232 then the waste form is well below its Class C limit; however, if the isotope at mass 232 is all U-232, then the Class C limit would be exceeded by more than a factor of 8. A chemical procedure to separate uranium from thorium followed by reanalysis by ICP-MS would be required to resolve this issue. A similar issue occurs at mass 238, which could be U-238 or Pu-238; however, in this case Pu-238 can be ruled out as a contributor to the isotope measured at mass 238 for the following reasons. Pu-238 has a half-life of 87.7 years and its daughter product (U-234) has a half-life of 2.5 × 105 years and a measured concentration of < 0.002 µg/L. If significant concentrations of Pu-238 were present in this waste, then the amount of measurable U 234 would have increased over the decades of storage in the Hanford tanks. Because this was not observed, it is concluded that the isotope measured at mass 238 is all U-238. A total of 68 organic compounds were targeted for analysis in the off-gas condensate. Of these compounds, only nine were measured above their respective minimum reportable concentration. These compounds were acenaphthene, acetone, n-butyl alcohol, p,p’-DDT, methyl ethyl ketone, nitrobenzene, o nitrophenol, pyridine, and toluene. Of the detectable compounds, only acenaphthene, acetone, o nitrophenol, and pyridine were above wastewater standards (40 CFR 268.48 - Universal Treatment Standards). None of the organic compounds exceeded the non-wastewater standards (40 CFR 268.48 - Universal Treatment Standards). Analysis of the TCLP leachates from the Cast Stone waste forms indicated that none of the analytes exceeded the Universal Treatment Standard and, in general, all were well below the standards.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Quasi-Biennial Oscillation in Model-Simulated and Observed Equatorial Temperature of the Lower Stratosphere

In an otherwise thorough survey of metrics for models that simulate the Quasi-Biennial Oscillation, Schenzinger et al. say “there is no comparable observational dataset” to compare with model-simulated stratospheric temperatures (Geosci. Model Dev. 10, 2157-2168, 2017). They compare model temperatures only with reanalysis datasets, which come from numerical weather prediction models and therefore are not direct observations. But stratospheric brightness temperatures have been directly observed by microwave radiometers on board a series of satellites since 1979. Christy and Drouilhet (J. Climate 7, 106-120, 1994) found a QBO signal in 1979-1992 data from the Microwave Sounding Unit’s lower stratospheric Channel 4 (with peak weighting function at the 75hPa pressure level and half-power values at 120 and 40hPa, about 20±5 km altitude). To detect the QBO signal, Christy and Drouilhet used a latitude weighting that matches the QBO’s anti-correlation between the Equator and ±15°. Fernandez et al. also found a QBO signal in 1979-2000 MSU data, using EOF analysis (J. Climate 17, 3934-3946, 2004). Recently, Christy and Covey extended Christy and Drouilhet’s analysis through 2017 (“Stratospheric Temperature,” Section 2b5 in State of the Climate in 2017. Bull. Amer. Meteor. Soc. 99, S150–S152; Figure 2.10c). The QBO signal was again clearly visible. Although temperature trends for the lower atmosphere are sensitive to inter-satellite calibration and other processing details, giving rise to some controversy, data for the lower stratosphere are more robust. Christy and Covey’s Figure 2.9 shows that data processed separately by the National Oceanic and Atmospheric Administration (NOAA) and by Remote Sensing Systems (RSS) gives a QBO index that is virtually identical to that of Christy’s group at the University of Alabama at Huntsville (UAH).

58 GEOSCIENCES↗

Storm Surge Modeling in Puget Sound

In this study, a storm surge model of the Salish Sea was developed to simulate storm surge in Puget Sound using the unstructured-grid, finite-volume community ocean model (FVCOM). The model was based on Pacific Northwest National Laboratory’s existing Puget Sound hydrodynamic model that has been validated extensively in previous studies. To identify representative historical storm events, a systematic approach was developed based on the non-tidal residual (NTR) method. A total of 34 storm surge events between 1980 and 2016 were identified and simulated. To accurately simulate storm surge inside Puget Sound, the model was driven by reanalyzed Climate Forecast System Reanalysis meteorological forcing and observed water levels at the entrance of Strait of Juan de Fuca and southern entrance of Johnstone Strait. Model results for total water level, storm surge, and currents were compared with field measurements. A series of error statistics parameters were also calculated to quantify the model’s skills in simulating storm surge in the Salish Sea. Error statistics of model performance metrics demonstrated that the Salish Sea storm surge model was able to simulate storm surge inside Puget Sound with high accuracy. Storm surge propagation into Puget Sound is a nonlinear process that cannot be simply determined by a static approach for the entire domain. The maximum NTR distribution inside Puget Sound suggests that storm surge tends to be amplified in several sub-basins and inlets of the Puget Sound, such as Bellingham Bay, Hood Canal, south Puget Sound, and the multi-inlet basin behind Agate and Rich Passages. Therefore, future study is necessary to further quantify the storm surge level in these high-risk areas through field measurements and refined model simulations.

16 TIDAL AND WAVE POWER↗

Online mapping and forecasting of epidemics using open-source indicators

Open-source indicators have been proposed as a way of tracking and forecasting disease outbreaks. Some, such are meteorological data, are readily available as reanalysis products. Others, such as those derived from our online behavior (web searches, media article etc.) are gathered easily and are more timely than public health reporting. In this study we investigate how these datastreams may be combined to provide useful epidemiological information. The investigation is performed by building data assimilation systems to track influenza in California and dengue in India. The first does not suffer from incomplete data and was chosen to explore disease modeling needs. The second explores the case when observational data is sparse and disease modeling complexities are beside the point. The two test cases are for opposite ends of the disease tracking spectrum. We find that data assimilation systems that produce disease activity maps can be constructed. Further, being able to combine multiple open-source datastreams is a necessity as any one individually is not very informative. The data assimilation systems have very little in common except that they contain disease models, calibration algorithms and some ability to impute missing data. Thus while the data assimilation systems share the goal for accurate forecasting, they are practically designed to compensate for the shortcomings of the datastreams. Thus we expect them to be disease and location-specific.

42 ENGINEERING↗

Ocean and Sea Ice and their Interactions around Greenland and the West Antarctic Peninsula in Forced Fine-Resolution Global Simulations

Anomalously warm ocean waters have been implicated as the cause of accelerated ablation along the margin of the Greenland ice sheet, as well as the cause of increasing basal melt rate, mass loss, and grounding line retreat of many Antarctic ice shelves. The overarching science objective of this project is to investigate how the interplay of regional processes and decadal changes in local and remote forcing impact the delivery and end member composition of waters over the continental shelves of Greenland and Antarctica. To address this goal, an existing global eddy-active ocean general circulation model (OGCM), coupled to a thermodynamic/dynamic ice model and forced with atmospheric reanalysis fluxes from 1948-2009, was analyzed to understand these processes around the continental margins of Greenland and Antarctica. This simulation did not contain a representation of ice sheet melt or resolve mesoscale eddies over these continental margins, so two new coupled OGCM/sea-ice models were constructed and analyzed to address the roles of small scale features and processes (< 5km) and freshwater flux surpluses.

54 ENVIRONMENTAL SCIENCES↗

High-Resolution Regional Wave Hindcast for Hawaii

This report summarizes modeling efforts for hindcasting of wave climate within the exclusive economic zone (EEZ) around the state of Hawaii. Specifically, the report provides detailed description of model mesh development, sensitivity analysis of the configuration of model parameters, data used for model forcing and validation, model skill assessment, and model outputs for resource characterization. The unstructured, nested-grid modeling approach incorporates a regional high-resolution SWAN (Simulating WAves Nearshore) model within the global-regional WAVEWATCH III® (WW3) wave model. The models were configured to comply with the International Electrotechnical Commission (IEC) Technical Standards for wave energy resource characterization. The SWAN model domain covers the entire EEZ with a spatial resolution of approximately 300 m in the nearshore region. Two levels of WW3 nested grids, from 0.5 arc-degree at global to 7.5 arc-minute at regional scale, were used to provide boundary conditions that drive the high-resolution nearshore SWAN model. The WW3 and SWAN models were forced by 0.5 arc-degree Climate Forecast System Reanalysis wind and 5 km regional Weather Research and Forecasting wind, respectively. Wave resource and bulk wave parameters were simulated for a 32-year period from 1979 to 2010, and were subsequently validated using wave buoy data within the model domain. Model performance was evaluated using a set of error statistics. Overall, the model shows good skills in reproducing the wave climate in the Hawaii EEZ in both spatial and temporal domains. Comparisons of time series and scatter plots for the six IEC resource parameters and the associated error statistics tables, and horizontal two-dimensional plots of annually averaged and monthly averaged IEC parameters are provided.

16 TIDAL AND WAVE POWER↗

Extraction and Parametrization of Isobaric Trinucleon Elastic Cross Sections and Form Factors

By mining data from Jefferson Lab Hall A experiment E08-014 a new 3 He elastic cross section was extracted from a large quasielastic background. This measurement was taken with an initial beam energy of 3.356 GeV and an angle of 20.51°. The cross section was found to be 1.345 × 10 -6 µb/sr ± 0.086 × 10 -6 µb/sr at Q 2 = 34.19 fm -2 . This new data point falls approximately halfway between the first and second diffractive minima of the 3 He form factors. When combined with recent high Q 2 3 He elastic cross section measurements from Jefferson Lab and MIT-Bates this new data point improves our knowledge of the cross section and form factors at large momentum transfers. The new high Q 2 data motivate a reanalysis of the 3 He elastic cross section world data and provide an improved understanding of the magnetic form factor in particular. For this analysis the elastic cross section world data for 3 He, and its mirror nuclei 3 H, were collected. The world data spans a time frame from 1965 to 2016. The dataset contains electron energy ranges from tens of MeV to above 12 GeV for measurements performed at many different facilities. The world data were then fit using a sum of Gaussians parametrization which allowed for the extraction of both targets’ magnetic and electric form factors which were then used to calculate charge densities and radii. The new charge and magnetic form factors for 3 H and the charge form factor for 3 He are in good agreement with the 1994 fits from Amroun et al . However, the addition of the new high Q 2 data has caused the 3 He magnetic form factor’s first diffractive minimum to shift up in Q 2 by 1-3 fm -2 while also decreasing the magnitude of the magnetic form factor above Q2 ≈ 20 fm -2 . The first diffractive minima for 3H are located at Q2 ≈ 13 fm -2 and Q 2 ≈ 23-24 fm -2 for the charge and magnetic form factors respectively. The first diffractive minima for 3 He are located at Q 2 ≈ 11 fm -2 and Q 2 ≈ 17-20 fm -2 for the charge and magnetic form factors respectively. The charge radius for 3 He was found to be 1.90 fm ± 0.00144 fm in reasonable agreement with past measurements, and the charge radius for 3 H was found to be 2.02 fm ± 0.0133 fm which is much larger than past measurements. However, each of these charge radii has an additional uncertainty that must be applied to them due to allowing all parameters to float freely during the sum of Gaussians fitting procedure. This additional uncertainty should be small for 3 He, but it is likely quite significant for 3 H and would help bring this charge radius closer to agreement with past measurements that made different fitting choices. Unfortunately, this analysis was unable to quantify this additional uncertainty. The new form factor fits were compared to modern theoretical predictions from the 2016 paper of Marcucci et al . The ‘conventional’ theoretical approach applied in this paper modelled two and three-body nucleon interactions with relativistic corrections and was reasonably successful at predicting the charge form factors of 3 H and 3 He. χEFT predictions were also often successful. However, while the ‘conventional’ approach still performed best, theory failed to accurately predict the magnetic form factors of either 3 H or 3 He. The first diffractive minimum of the new 3 He magnetic form factor fits actually moved further away from theory. This disagreement between theory and experiment provides motivation for new asymmetry measurements using polarized 3 He and a polarized electron beam. When the beam is scanned in Q 2 on the target the sign of the asymmetry will flip at the form factor minima pinning down their true location.

Barcus, Scott↗

Accelerated Climate Model for Energy (ACME): Ocean and Sea-Ice Processes

The primary goal of this project was to understand the role of the ocean and sea-ice components in the evolution of the climate in both a high-resolution fully-coupled 1850 preindustrial control and present day transient climate simulations run using the Energy Exascale Earth System Model (E3SM), formerly known as the Accelerated Climate Model for Energy (ACME). Two distinct approaches to the initialization of the present day transients were tested: in the first, an ensemble of three transients used atmospheric reanalysis forced 0.1-degree ocean/sea-ice states, while a fourth transient was branched off the preindustrial control. Biases from the control were inherited by its successor transient, in particular, sea surface temperatures (SSTs) at high latitudes were too warm and too much northward meridional heat transport occurred in the North Atlantic Ocean. SSTs in the Northern Hemisphere and Atlantic meridional heat transport increased in the transients initialized from the ocean/sea-ice simulation over a 40-50 year period to largely resemble the transient branched off the control simulation. Excessive absorbed solar radiation (ASR) is considered to be responsible for the SST biases as well as the formation of mode waters in lighter density classes than in reality both in the Southern Ocean and the North Atlantic Ocean subtropical gyre. These mode waters ventilate the thermocline waters to the north of their formation sites explaining the excessive Atlantic meridional heat transport and some of the warming in the high-latitude North Atlantic Ocean after multiple decades.

54 ENVIRONMENTAL SCIENCES↗

Atmospheric River Tracking Method Intercomparison Project (ARTMIP): Report of the Second ARTMIP Workshop

Atmospheric rivers (ARs) have for the last decade been broadly recognized for their global and regional significance in mediating energy and water cycles. As a distinct large-scale circulation feature, ARs can be characterized by long, narrow bands of atmospheric moisture transport from the tropics to higher latitudes. They are both an important source of water supply to coastal regions as well as a hazard because of their predisposition to increase flood risk. However, predicting ARs poses a significant challenge to the scientific community, as they exhibit large variability from subseasonal-to-interannual time scales. On multi-decadal and longer time scales, it is unclear how the frequency and intensity of ARs will change with a warming climate. Hence ARs play a significant role in understanding predictability of water cycle variability and extremes as well as becoming a factor in assessing risks to future infrastructures. There is a large body of literature that has explored ARs from both global and regional perspectives and from timescales spanning hourly to centennial. Despite significant progress in understanding ARs, significant gaps remain, e.g., in characterizing the dynamical and thermodynamical processes associated with ARs, improving predictions of ARs at weather and subseasonal-to-seasonal timescales, and understanding and quantifying the impacts of ARs on the design and management of built infrastructures. Furthermore, the consensus definition of ARs remains essentially qualitative, and investigators have had to rely on heuristic definitions of ARs for quantitative studies. In the First Atmospheric River Tracking Method Intercomparison Project (ARTMIP) workshop held in May 2017, it was recognized that (1) there are many heuristic AR tracking algorithms employed in the literature, (2) our quantitative—and possibly qualitative— understanding of ARs and their impacts may depend on the details of the algorithm used, (3) no data set yet exists to systematically explore the impact of AR tracking algorithm choice on scientific results, and (4) the broader scientific community therefore lacks any formal guidance on the advantages and disadvantages of different AR tracking methods. The First ARTMIP workshop defined and launched a multi-tiered intercomparison experiment designed to fill this community need. The first tier of ARTMIP was aimed at understanding the impact of AR algorithms on quantitative baseline statistics and characteristics of ARs, and the second tier includes sensitivity studies designed around specific science questions, such as reanalysis uncertainty and influences associated with climate change. The Second ARTMIP workshop was convened on April 23-24, 2018, as a two-day event, and following the completion of Tier 1 of the ARTMIP effort: an experiment in which most existing AR tracking algorithms were run on a standardized data set of reanalyzed weather conditions.

54 ENVIRONMENTAL SCIENCES↗