Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RETENTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Parameter uncertainty analysis of a biokinetic model of caesium

Parameter uncertainties for the biokinetic model of caesium (Cs) developed by Leggett et al. were inventoried and evaluated. The methods of parameter uncertainty analysis were used to assess the uncertainties of model predictions with the assumptions of model parameter uncertainties and distributions. Furthermore, the importance of individual model parameters was assessed by means of sensitivity analysis. The calculated uncertainties of model predictions were compared with human data of Cs measured in blood and in the whole body. It was found that propagating the derived uncertainties in model parameter values reproduced the range of bioassay data observed in human subjects at different times after intake. The maximum ranges, expressed as uncertainty factors (UFs) (defined as a square root of ratio between 97.5th and 2.5th percentiles) of blood clearance, whole-body retention and urinary excretion of Cs predicted at earlier time after intake were, respectively: 1.5, 1.0 and 2.5 at the first day; 1.8, 1.1 and 2.4 at Day 10 and 1.8, 2.0 and 1.8 at Day 100; for the late times (1000 d) after intake, the UFs were increased to 43, 24 and 31, respectively. The model parameters of transfer rates between kidneys and blood, muscle and blood and the rate of transfer from kidneys to urinary bladder content are most influential to the blood clearance and to the whole-body retention of Cs. For the urinary excretion, the parameters of transfer rates from urinary bladder content to urine and from kidneys to urinary bladder content impact mostly. The implication and effect on the estimated equivalent and effective doses of the larger uncertainty of 43 in whole-body retention in the later time, say, after Day 500 will be explored in a successive work in the framework of EURADOS.

61 RADIATION PROTECTION AND DOSIMETRY↗

Litter type control on soil C and N stabilization dynamics in a temperate forest

Abstract While plant litters are the main source of soil organic matter ( SOM ) in forests, the controllers and pathways to stable SOM formation remain unclear. Here, we address how litter type ( 13 C/ 15 N‐labeled needles vs. fine roots) and placement‐depth (O vs. A horizon) affect in situ C and N dynamics in a temperate forest soil after 5 years. Litter type rather than placement‐depth controlled soil C and N retention after 5 years in situ , with belowground fine root inputs greatly enhancing soil C (x1.4) and N (x1.2) retention compared with aboveground needles. While the proportions of added needle and fine root‐derived C and N recovered into stable SOM fractions were similar, they followed different transformation pathways into stable SOM fractions: fine root transfer was slower than for needles, but proportionally more of the remaining needle‐derived C and N was transferred into stable SOM fractions. The stoichiometry of litter‐derived C vs. N within individual SOM fractions revealed the presence at least two pools of different turnover times (per SOM fraction) and emphasized the role of N‐rich compounds for long‐term persistence. Finally, a regression approach suggested that models may underestimate soil C retention from litter with fast decomposition rates.

Hatton, Pierre‐Joseph↗

Using the Charge-Discharge Cycling of Positive Electrode Symmetric Cells to Find Electrolyte/Electrode Combinations with Minimum Reactivity

The effects of solvents, salts, electrolyte additives and surface coatings on LiNi 0.4 Mn 0.4 Co 0.2 O 2 (NMC442) or LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) have been probed using positive electrode Li-ion symmetric cells coupled with dV/dQ analysis. A robust symmetric cell design is presented which prevents hardware corrosion for over at least 800 hours of testing to 4.5 V vs. Li/Li + at 40°C. Positive electrode symmetric cells using uncoated positive electrode materials and 1M LiPF 6 EC:EMC 3:7 or 1M LiPF 6 EMC electrolyte rapidly developed high impedance and showed poor capacity retention. However, if 1% pyridine boron trifluoride (PBF) was added to these electrolytes, cell performance was dramatically improved. Replacing LiPF 6 by LiBF 4 in the electrolytes above, with or without PBF, yielded positive electrode symmetric cells with good capacity retention. Two types of surface coatings were explored on NMC622 positive electrodes. Cells using surface-coated positive electrodes demonstrated better capacity retention for all electrolytes compared to cells without surface coatings. Finally, this work can be used as a guide by those attempting to find electrolyte/electrode pairs suitable for use in NMC/graphite cells that can operate with long lifetime to 4.5 V.

25 ENERGY STORAGE↗

Electrolyte and Cutoff Potential Effects on Cycle Life of Li4Ti5O12/LiNi0.9Mn0.1O2 Batteries for Behind-the-Meter Storage Applications

Behind-the-Meter Storage (BTMS) is a stationary battery energy storage system that is connected to the electrical distribution system on the customer's side of the utility's service meter. BTMS systems are used to store electrical energy from the grid as well as inconstant, renewable energy, such as local solar and wind generation. A successful BTMS system will allow the customer to pair their energy generation and storage to optimize electrical consumption from the grid, improving reliability and minimizing cost. For BTMS applications, batteries must be designed and optimized with different set of criteria from other leading segments of the Li-ion battery market, like transportation, due the system being stationary and proximal to the residential or commercial building it's benefitting. BTMS applications prioritize safety, cost (low/no-critical materials), reliability (20-year calendar life), and durability (10,000 cycle life), while having the ability to (minimally) compromise energy density and rate capability. Lithium titanate (Li4Ti5O12-, LTO) is a promising anode candidate for BTMS applications due to its high safety and capacity retention, while maintaining a reasonable 160 mAhg-1 reversable capacity and composition of relatively abundant materials. (1) Specifically, LTO has a high working voltage which helps to prevent Li dendrite formation, improving safety. Furthermore, LTO also has negligible lithiation-based volume change, leading to less mechanical pulverization, or loss of active material, upon cycling. For the cathode, materials with little or no Co are of high interest due to the high cost and low abundance of Co. LiMn2O4 (LMO) has been paired with LTO for BTMS applications in the past due to its safety, low cost (abundancy), and reasonably high operating voltage. (2-4) However, the low capacity of LMO limits energy density and specific energy. While not the highest priority for BTMS applications, increasing energy density will enable deployment in space constrained BTMS applications and decrease total cost. LiNi0.9Mn0.1O2 (LN-MO) is a recently developed material with promise due to its high operating voltage and relatively low price. (5) However, Ni-rich layered oxides, including LNMO, tend to struggle with capacity retention during high-voltage cycling due to mechanical pulverization, irreversible phase transitions, and unstable solid-electrolyte interphase. The study presented here focuses on building an understanding of how electrolyte solvent and varied cutoff potentials will impact the cycle life of LTO/LN-MO cells. Specifically, a comparison is provided between ethylene carbonate (EC), ethyl methyl carbonate (EMC), fluoroethylene carbonate (FEC), and Gen2 electrolyte solvents with 1M Lithium hexafluorophosphate (LiPF6) salt, cycling to two upper termination potentials, 2.6V and 2.7V. Electrochemical testing and diagnostics (e.g., differential capacity analysis, area specific impedance, constant voltage hold, and rate capability) and post-mortem characterization will be used to understand the aging behavior and failure mechanisms of the 8 cell combinations (four electrolytes and two voltage cutoffs). Cells with FEC electrolyte showed a lower initial capacity compared to cells with Gen2, EMC, and EC cycling at both voltages; however, the cells with FEC showed consistent trends in capacity retention with 2.6V and 2.7V termination potentials, while the cells with the other electrolytes showed much higher rates of capacity loss when cycling to the higher voltage. These results indicate that FEC may play a role in improving durability of high-voltage, Ni-rich electrode systems for use in high-cycle applications, such as BTMS.

electrolyte↗

Performance Assessment of Suture Type, Water Temperature, and Surgeon Skill in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters

Size reductions of acoustic transmitters implanted in migrating juvenile salmonids have resulted in the use of a shorter incision - one that may warrant only one suture for closure. However, it is not known if a single suture will sufficiently hold the incision closed when fish are decompressed and outward pressure is placed on the surgical site during passage of hydroelectric dams. The objectives of this study were to evaluate five response variables in juvenile Chinook salmon subjected to simulated turbine passage. Fish were implanted with an acoustic transmitter (0.43 g in air) and a passive integrated transponder tag (0.10 g in air); incisions (6 mm) were closed with either one or two sutures. Following exposure, no transmitters were expelled. In addition, suture and incision tearing and mortal injury did not differ between treatment and control fish. Viscera expulsion was higher in treatment (12%) than control (1%) fish. The higher incidence of viscera expulsion through single-suture incisions warrants concern. Consequently, the authors do not recommend using one suture to close 6-mm incisions associated with acoustic transmitter implantation when juvenile salmonids may be exposed to turbine passage.

Deters, Katherine A↗

Phosphorus Sorption to Aluminum‐based Water Treatment Residuals Reacted with Dairy Wastewater: 2. X‐Ray Absorption Spectroscopy

Phosphorus capture from wastewater can decrease water pollution and provide a P‐rich fertilizer alternative for use in agricultural production. This study was conducted to elucidate P retention mechanisms in Al‐based water treatment residuals (Al‐WTR) to gain insight regarding P sorption and the potential for P release from Al‐WTR after reaction with dairy wastewater. Synchrotron‐based microfocused X‐ray fluorescence (micro‐XRF) spectrometry, bulk P K ‐edge X‐ray absorption near edge structure spectroscopy (XANES), and P K ‐edge micro‐XANES spectroscopy were used to determine P distribution and speciation within the Al‐WTR materials. Bulk XANES analyses indicated a shift from ∼56 P atom % Ca‐associated P in the initial Al‐WTR to ∼32% P atom % Ca‐associated P after reaction with wastewater; Al‐associated P made up the remainder of the P species. According to XANES analyses, adsorption appeared to be the primary P retention mechanism in the Al‐WTR materials. However, micro‐XANES analyses depicted a more complicated picture of P retention mechanisms, with regions of primarily Al‐associated P, regions of primarily Ca‐associated P, regions of mixed Al‐ and Ca‐associated P, and distinct apatite‐ or octocalcium phosphate‐like P grains. Synchrotron micro‐XRF mapping further suggested that exposure of the aggregate exteriors to wastewater caused P to diffuse into the porous Al‐WTR aggregates. Organic P species were not explicitly identified via P K ‐edge XANES despite high organic matter content, suggesting that organic P may have been predominantly associated with mineral surfaces. Although diffusion and sorption to Al may decrease P bioavailability, Ca‐associated P may increase P bioavailability from Al‐WTR that is reused as a soil amendment. Core Ideas XAS provided unambiguous evidence of P associations with Al and Ca in water treatment residuals. Phosphorus adsorbed to Al and Ca surfaces in Al‐based water treatment residuals. Grains of apatite‐ or octocalcium phosphate‐like P were found in water treatment residuals. Phosphorus diffused into aggregates on reaction with P‐rich wastewater. Evidence from electron microscopy and XRD complemented these findings.

Massey, Michael S.↗

In Vitro Assessment of the In Vivo Stability of Cu-64 Radiopharmaceuticals

Research Plans: The successful development of Cu-64 radiopharmaceuticals depends upon retention of the Cu-64 atom in the radiopharmaceutical. To date, the focus has been on the development of chelators that better retain Cu-64, but there has been no effort to develop an effective method by which improved retention may be measured. In the absence of a suitable analytical method, the stability of Cu-64 radiopharmaceuticals is estimated indirectly, with decreased liver uptake suggesting higher in vivo complex stability. But this approach is inadequate for radiopharmaceuticals, such as radiolabeled antibodies, that are expected to accumulate in the liver even when there is no free Cu-64 present. The absence of such a method has also hampered efforts to systematically evaluate the chemical factors that may give rise to improved retention. The objective of this project is to develop and validate such a method. Accomplishments: The two primary accomplishments of this project will be 1) the development and validation of a method to measure the stability of Cu-64 radiopharmaceuticals and 2) the determination of the chemical factors that define the in vivo stability of Cu 64 radiopharmaceuticals. Because Cu(II) is extremely labile, the in vivo stability of Cu-64 radiopharmaceuticals is not primarily determined by the amount of free Cu that is present at any given time or by the thermodynamic stability constants, but rather by the rate at which Cu is lost from the complex, the dissociation rate constant, kd. The dissociation rate constants of the Cu-64 complexes from a series of bifunctional chelators (BFCs) will be measured using Free Ion Selective Radiotracer Extraction (FISRE), a technique originally developed to measure bioavailable Cu in environmental samples. FISRE will also be applied to the determination of the kd's of a series of reference Cu-64 complexes to determine the chemical factors that define the in vivo stability of Cu-64 radiopharmaceuticals. Potential Benefits: The FISRE method that will be used in this project, once validated, will provide researchers with a core technology by which the stability of Cu 64 radiopharmaceuticals can be accurately measured. In the short-term, we expect to produce extensive data regarding the stability of Cu-64 complexes of ligands of radiopharmaceutical interest, primarily those that are most commonly used as BFCs (e.g., DOTA, TETA). These data will provide a quantitative basis for deciding which ligands may be best suited for use as BFCs, data that is not currently available. In the intermediate term, we expect that these results will facilitate the development of new Cu-64 radiopharmaceuticals by providing a quantitative approach to assessing the stability of Cu-64 chelates. This innovative methodology will enable investigators to quantitatively compare the ability of different BFCs to retain Cu-64 in vivo. The benefits of this approach will be best seen in the development of Cu-64-labeled monoclonal antibodies where the accumulation of antibodies in the liver obviates liver uptake as an effective surrogate measure of Cu-64 lability. In the longer-term, we anticipate an improvement in the way in which various diseases (especially cancer) are detected, diagnosed, staged, and treated. This method will also enable researchers to distinguish differences in biodistribution that may arise from differences in charge, lipophilicity, etc. from those that may arise from loss of Cu-64 from the chelator. Last, this novel quantitative tool will allow investigators to evaluate the chemical factors that determine the in vivo stability of Cu-64 radiopharmaceuticals laying the groundwork for the future development of more effective Cu-64 radiopharmaceuticals. Once the feasibility of this method is established, it can also be used to evaluate the stability of other metalloradiopharmaceuticals including those based on Ga-68, a radionuclide that is showing great promise in tumor imaging.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Letter Report for Characterization of Biochar

On 27 November 2012, a bulk biochar sample was received for characterization of selected physical and chemical properties. The main purpose of the characterization was to help determine the degree to which biochar would be suitable as a soil amendment to aid in growth of plants. Towards this end, analyses to determine specific surface, pH, cation-exchange capacity, water retention, and wettability (i.e. surface tension) were conducted. A second objective was to determine how uniform these properties were in the sample. Towards this end, the sample was separated into fractions based on initial particle size and on whether the material was from the external surface or the internal portion of the particle. Based on the results, the biochar has significant liming potentials, significant cation-retention capacities, and highly variable plant-available moisture retention properties that, under the most favorable circumstances, could be helpful to plants. As a consequence, it would be quite suitable for addition to acidic soils and should enhance the fertility of those soils.

biochar↗

Reactive amendment saltstone (RAS). A novel approach for improved sorption/retention of radionuclides such as technetium and iodine

This study examined the use of reactive amendments (hydroxyapatite, activated carbon, and two types of organoclays) that prior research suggests may improve retention of 99 Tc and 129 I. Tests were conducted using surrogates for 99 Tc (NaReO 4 ) and 129 I (NaI). Results showed that adding up to 10% of organoclay improved the retention of Re without adversely impacting hydraulic properties. To a lesser extent, iodine retention was also improved by adding up to 10% organoclay. Numerical modeling showed that using organoclay as a reactive barrier may significantly retard 99 Tc release from saltstone disposal units.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Final Report: Dominant Mechanisms of Uranium-Phosphate Reactions in Subsurface Sediments

Phosphate addition is an in situ remediation approach that may enhance the sequestration of uranium without requiring sustained reducing conditions. However, the geochemical factors that determine the dominant immobilization mechanisms upon phosphate addition are insufficiently understood to design efficient remediation strategies or accurately predict U(VI) transport. The overall objective of our project is to determine the dominant mechanisms of U(VI)-phosphate reactions in subsurface environments. Our research approach seeks to determine the U(VI)-phosphate solid that form in the presence of different groundwater cations, characterize the effects of phosphate on U(VI) adsorption and precipitation on smectite and iron oxide minerals, examples of two major reactive mineral phases in contaminated sediments, and investigate how phosphate affects U(VI) speciation and fate during water flow through sediments from contaminated sites. The research activities conducted for this project have generated a series of major findings. U(VI) phosphate solids from the autunite mineral family are the sole phases to form during precipitation, with uranyl orthophosphate not occurring despite its predicted greater stability. Calcium phosphates may take up substantial quantities of U(VI) through three different removal processes (adsorption, coprecipitation, and precipitation) but the dominance of each process varies with the pathway of reaction. Phosphate co-adsorbs with U(VI) onto smectite mineral surfaces, forming a mixed uranium-phosphate surface complex over a wide range of conditions. However, this molecular-scale association of uranium and phosphate has not effect on the overall extent of uptake. In contrast, phosphate enhanced U(VI) adsorption to iron oxide minerals at acidic pH conditions but suppresses such adsorption at neutral and alkaline pH, despite forming mixed uranium-phosphate surface complexes during adsorption. Nucleation barriers exist that inhibit U(VI) phosphate solids from precipitating in the presence of smectite and iron oxide minerals as well as sediments from contaminated sites. Phosphate addition enhances retention of U(VI) by sediments from the Rifle, CO and Hanford, WA field research sites, areas containing substantial uranium contamination of groundwater. This enhanced retention is through adsorption processes. Both fast and slow uptake and release behavior is observed, indicating that diffusion of uranium between sediment grains has a substantial effect of U(VI) fate in flowing groundwater systems. This project has revealed the complexity of U(VI)-phosphate reactions in subsurface systems. Distinct chemical processes occur in acidic and alkaline groundwater systems. For the latter, calcium phosphate formation, solution complexation, and competition between phosphate and uranium for adsorption sites may serve to either enhance or inhibit U(VI) removal from groundwater. Under the groundwater conditions present at many contaminated sites in the U.S., phosphate appears to general enhance U(VI) retention and limit transport. However, formation of low-solubility uranium phosphate solids does not occur under field-relevant conditions, despite this being the desired product of phosphate-based remediation approaches. In addition, simple equilibrium approaches fail to well-predict uranium fate in contaminated sediments amended with phosphate, with reactive transport models that include reaction rates and mass transport through occluded domains needed to properly describe the system. Phosphate addition faces challenges to being effective as a stand-alone groundwater treatment approach but would prove beneficial as an add-on to other treatment methods that will further limit uranium migration in the subsurface.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Continuation and Enhancement of the MPOWIR Program

MPOWIR is a community-based program that provides mentoring to physical oceanographers from late graduate school through early careers. The overall goal of MPOWIR is to make mentoring opportunities for junior physical oceanographers universally available and of higher quality by expanding the reach of mentoring opportunities beyond individual home institutions. The aim is to reduce the barriers to career development for all junior scientists in the field, with a particular focus on improving the retention of junior women. Over the past five years MPOWIR has expanded significantly. This funding cycle saw the development and enhancement of MPOWIR’s programs and outreach opportunities. MPOWIR’s main programmatic offerings are: mentor groups, a biannual conference, a website and blog, and town hall meetings at national events. Since 2009, MPOWIR has hosted 15 mentor groups, three Pattullo conferences, and created a website that has attracted over 50,000 visitors. MPOWIR’s mentoring groups and Pattullo conferences have reached more than 130 unique participants. Mentor Groups Mentor groups were established in the fall of 2008, and continue to gain momentum after 5 years. Since 2009, 11 groups have formed, with participants mainly, but not exclusively, drawn from Pattullo attendees. To gauge the impact of mentor groups, participants are surveyed approximately annually. Based on an extensive 2011 survey, 100% of mentoring group participants reported that they made progress on their stated scientific, professional, and personal goals. As part of these surveys, participants are asked what they value about their mentoring group, what the benefit of the mentoring group is to their current position, and they are asked questions about the logistics and setup of the groups. Based on the survey conducted in 2012, all participants rated participation in these groups a valuable experience, with particular value placed on feedback on professional development (100% Excellent to Good) and feedback on personal matters (92% Excellent to Good). Pattullo Conferences The centerpiece of the MPOWIR program is the Pattullo Conference, named for June Pattullo, the first woman to receive a Ph.D. in physical oceanography. At each event, the agenda includes research talks, professional development sessions, small group activities, and a question-and-answer session about early-career and retention issues posed by junior scientists to senior researchers. Pattullo Conference participants are surveyed after each conference about their experience. This survey asks participants to rate their opinion on specific topics and invites comments. Combining results from three conferences, 99% of junior participants would recommend the conference to another junior scientist. Of the junior participants, 92% rated the conference as “extremely valuable” overall, with a particular value placed on networking and professional development opportunities. Overall Impact To gain a better perspective on the success of MPOWIR to date, early participants were surveyed in 2013 about their current position, and the impact of MPOWIR on their career path. Individuals were asked to rank the extent to which MPOWIR had impacted various aspects of their professional growth. These aspects included efforts to obtain their current position; exposure to professional development skills; broadening of their professional network; mentoring on work and family balance; performance in current position; and raising awareness of mentoring in career development. Participants overwhelming indicated that MPOWIR had positively impacted all of these aspects. In particular, 95% of respondents expressed that MPOWIR exposed them to useful professional development skills “to a great extent” and 89% consider MPOWIR to have positively impacted their professional network “to a great extent”. Of those surveyed, the majority of participants were 2 years from their Ph.D. at the time of initial involvement. Their current job positions are well distributed over all post-Ph.D. categories: the greatest percentages of positions held are at research institutions (non-academic) or government agencies (29.3%), followed closely by non-faculty research positions at universities (27.6%) and faculty at research universities (22.4%). The remaining positions held (4-year college faculty, profit or not-for-profit company, policy, and graduate students) collectively total 19%. These initial indications point toward mentoring, as offered by MPOWIR, as an effective means for improving retention of women in physical oceanography.

58 GEOSCIENCES↗

Assessment of the Idaho National Laboratory Remote Handled Low Level Waste Disposal Facility Hydraulic Performance

This document provides a summary of the expected hydraulic performance of the vault drainage system installed at Idaho National Laboratory’s Remote Handled Low-Level Waste disposal facility. Hydraulic performance was assessed through analysis of the mechanical properties of the drainage system and backfill materials, including material gradation and proctor data; laboratory data, including bulk density, porosity, unsaturated hydraulic conductivity, moisture-retention data, and van Genuchten parameters; and field-data collected using in-situ instrumentation with data collected during a vault-scale infiltration characterization test. Hydraulic performance of the vault drainage system was designed to promote a greater than 500-year vault concrete longevity. The predicted hydraulic performance is, in part, a function of the materials used in construction, sequencing of the hydraulic drainage materials, and the as-built condition of the materials following compaction necessary to ensure vault stability. Specifying specific as-built hydraulic properties is exceedingly difficult at the facility specification/design phase. Instead, material mechanical properties were specified and confirmed early during the construction process. As the drainage materials were installed, samples were sent to a laboratory for hydraulic property testing and, after drainage system installation was complete around the performance assessment vaults, a field-scale infiltration test was conducted with data collection to verify the as-built hydraulic performance. This report provides summary data for the measured mechanical properties, laboratory data, and field infiltration characterization test data. Mechanical data have relatively little variability because of the sieve system used when the materials were crushed onsite. Laboratory data were obtained for a relatively small number of material samples, but the data obtained for each sample are extensive. However, laboratory data provide the moisture retention relationships and relative hydraulic conductivity-moisture content relationships for uninstalled materials. Conducting field-scale infiltration tests with collection of moisture retention data and wetting front propagation data allows extension of laboratory data to the as-installed conditions of the vault drainage system. These combined data types are integrated using a numerical simulation of the infiltration characterization test to refine model parameters. The infiltration characterization model will be used to support the hydraulic and concrete performance of the vault system provided in the facility performance assessment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quarternary amine-based sodalite sorbent for selective removal of Tc-99 and I-129

Technetium-99 and Iodine-129 are risk-driven contaminants of high priority to DOE-EM office. Both radionuclides are prevalent at DOE nuclear waste sites. Because these radionuclides greatly affect the catalytic redox extraction process of uranium and plutonium in the fuel cycle, their removal from spent nuclear solution is highly desirable for efficient recovery of uranium and plutonium, and mitigation of potential releases of these radionuclides to the environment. The goals of this project were to develop advance sorbents for simultaneous capture of Tc-99 and I-129 from contaminated groundwater and nuclear waste streams. This research examined modification of porous commercial and synthesized aluminosilicate minerals (zeolite) for enhanced retention of radionuclides. Herein we report the development of a sorbent that: (1) binds pertechnetate ($TcO_4^-$) with a sorption efficiency (Kd) greater than any other sorbent materials previously reported in literature, (2) exhibits fast sorption kinetics and (3) uptakes $TcO_4^-$ under acidic and oxidizing conditions where Tc-99 retention is problematic. Thus, the use of quaternary-amine modified mesoporous zeolite as an amendment and/or permeable reactive barrier would be a robust strategy for Tc-99 remediation. Moreover, further modification of the evaluated zeolite materials with silver is envisioned to promote effective retention of both Tc-99 and I-129 and this study was slated for fiscal year 2019.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Safety Test on Irradiated Compact 4-2-2

Post-irradiation examination (PIE) is in progress on coated particle fuel compacts from the first Advanced Gas Reactor (AGR) Fuel Development and Qualification irradiation experiment (AGR-1). The AGR-1 Post-Irradiation Examination Plan (INL/PLN-2828, Rev. 1) includes safety testing of the irradiated compacts in the Oak Ridge National Laboratory (ORNL) Core Conduction Cooldown Test Facility (CCCTF) and the Idaho National Laboratory (INL) Fuel Accident Condition Simulator (FACS) to evaluate the effect of elevated temperature on the fuel microstructure and fission product retention. Standard safety tests involve heating compacts to maximum temperatures of 1600, 1700, or 1800°C for typically 300 hours, where 1600°C is the expected maximum temperature during a high-temperature gascooled reactor (HTGR) depressurization conduction cooldown event, while 1700 and 1800°C explore the performance margin. The Compact 4-2-2 safety test was conducted using multiple hold temperatures from 1000–1600°C to investigate fission product retention at temperatures below 1600°C and during thermal cycling, with particular emphasis on silver retention behavior [INL/PLN-4714]. Previous tests produced unusual silver releases when temperatures were inadvertently or intentionally cycled between room temperature and 1600°C [ORNL/LTR-2012/396]; the Compact 4-2-2 test was designed to reproduce and explore these observations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tagging a smaller size class of fish: can it be done?

There is a new acoustic transmitter that is smaller than anything on the market and can be used to tag smaller fish than ever before. It is called the Eel-Lamprey Acoustic Tag (ELAT). Although the technology is ready to use, we cannot deploy it in the field until the biological proof of concept is tested in the lab. As such, we conducted two laboratory studies to evaluate the tag effects of surgical implantation in small (30–95 mm fork length [FL]) fry and smolt sized juvenile salmon. The first study was a survival, transmitter retention, and growth holding study and the second was a swimming performance study. Our goal was to identify a minimum size threshold for Chinook Salmon that can be implanted with an ELAT where survival, ELAT retention, growth, and swimming performance would not be affected compared to an untagged population. In the survival and growth study, fish were held for 50 days. At the end of the study we found that fish as small as 55 mm FL had a 95% survival rate. There was no difference in growth between tagged and untagged fish. The swimming performance study identified a minimum size threshold of 51 mm FL. This indicated the swimming performance of a tagged fish was not different from an untagged fish once the fish was 51 mm or longer. Using the results from the two laboratory studies, 55 mm FL was identified as a minimum size threshold where growth, survival, ELAT retention, and swimming performance were not affected compared to untagged fish. This research confirmed we can tag a smaller size class of fish and provided a minimum size threshold for use in tagging guidelines.

42 ENGINEERING↗

Accelerating Manufacturing of Powder-Processed Strong, Lightweight and Thermally Stable Bulk Nanocrystalline Al Alloys via Engineered Interface States

The overarching goal of this program is to develop an integrated materials by design framework enabling a simple, scalable, and efficient manufacturing route for thermally stable nanocrystalline Al-based alloys with high specific strength over a range of service temperatures. The central scientific principle underpinning this program is the elucidation, and ultimately implementation in novel alloy design, of unique interfacial structures and chemistries driven by segregation in multi-component systems that give rise to unprecedented processability and properties. This program targeted nanocrystalline Al-based ternary alloys produced by mechanical alloying of powders followed by compaction and sintering with hot pressing, which are inherently scalable and inexpensive manufacturing routes, but when applied to nanocrystalline alloys are usually plagued by low density and/or poor retention of the intended nanostructures during processing. This program successfully demonstrated manufacturing of a bulk (>1 cm 3 ) nanocrystalline Al-based alloy with a combination of thermal stability, high temperature strength retention, and specific strength that exceeds the current-state-of-the-art of Al alloys. It is anticipated that the greatest technological impact will occur by demonstration of rapid and scalable manufacturing of bulk nanocrystalline Al alloys with exceptional thermal stability and mechanical performance, thus enabling increased energy efficiency in high performance power generation systems via: (i) replacement of existing components with lightweight Al-based alloys and (ii) increasing operating temperatures with property retention. The program focused on the development of a simple and efficient manufacturing route for thermally stable nanocrystalline Al-based alloys with high specific strength over a range of service temperatures. The program is expected to have direct impact on scalable and economic manufacturing of bulk nanocrystalline alloys. This program profited from the recent discovery by the project team of segregation-driven amorphous intergranular films in nanocrystalline metallic alloys that can be kinetically frozen-in at sub-solidus temperatures. These interfacial states (also known as amorphous complexions) comprise a large fraction of the total material in nanocrystalline alloys and are responsible for two beneficial characteristics that anchor the proposed work: (1) activated sintering leading to high density and (2) retained nanostructures leading to high strengths that approach a substantial fraction of the theoretical limit. More specifically, these engineered interfaces led to a three-fold benefit: (i) high-throughput materials processing with low energy budget and cost, (ii) exceptional thermal stability, and (iii) high specific strength at both room temperature and intermediate temperatures experienced during service.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Considerations for Improving the Technoeconomic Viability of Heat Pipe Microreactors by Employing a Functional Containment Approach

The economic cost of a microreactor is being investigated by leveraging MARVEL cost information in conjunction with some simplified design and analysis activities to present a hypothetical, yet feasible, option for investigation. This bottom-up cost estimate for a hypothetical commercial microreactor will be used to provide guidance to the industry and research communities regarding where priorities should be set to improve the viability of broad microreactor deployment. To support the design and analysis activities required to present a feasible option, some understanding of maximum accidental radionuclide releases and consequences is needed to provide bounding estimates on containment or confinement systems for radionuclide retention. To estimate fission product barrier and retention performance, a gaussian plume dose and dispersion model is employed, with isotopic inventories being propagated between barriers assuming conservative fractional release rates. Demonstrably conservative meteorological assumptions are also assumed. Standard reference release rates are assumed where safety requirements could be easily and economically employed. Results are provided in units of total effective dose equivalent as a function of distance from the release (i.e., the reactor). Initial results indicate that the hypothetical microreactor will likely need to credit the fuel cladding and at least one other barrier, or combination of barriers, to ensure public health and safety as required during a postulated accident. This approach is referred to as “functional containment,” since no single barrier will be relied upon for satisfying regulatory requirements and fundamental safety functions for radionuclide retention. Finally, a set of barrier options are provided so that future economic analyses can select the most viable design path.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Develop an efficient and cost-effective novel anaerobic digestion system producing high purity of methane from diverse waste biomass

This project focuses on developing an advanced, intensified anaerobic digestion system aimed at transforming the treatment and conversion of organic wastes into valuable products, specifically renewable natural gas. The motivation for this research stems from the limitations of conventional anaerobic digestion technologies, which often face challenges such as long retention times, high operational costs, and incomplete organic material degradation. The new technology called Intensified Versatile Anaerobic Digestion (IVAD), is developed to address these challenges by incorporating innovative reactors and processes that enhance the overall efficiency and output of anaerobic digestion. The significance of this project lies in its potential to revolutionize waste management practices and waste biomass utilization. The IVAD system integrates a hyperthermophilic anaerobic acidification reactor, a hydrothermal treatment (HTT) unit, and both thermophilic and mesophilic methanogenic reactors. This combination enables a higher rate of organic breakdown and energy recovery, resulting in faster processing times, reduced reactor sizes, and lower operational costs compared to traditional systems. Key data include an increase in methane productivity to 1.18 m 3 /m 3 /day, a significant improvement compared to the baseline technology’s 0.64 m 3 /m 3 /day. Additionally, the IVAD system achieves a 45% reduction in levelized cost of energy (LCOE), down to $\$$10.04/MMBTU, and an energy return on investment (EROI) of 3.19, representing an 87% increase over baseline levels. Technical and economic analyses highlight that the IVAD system significantly reduces hydraulic retention time (HRT) and solid retention time (SRT). The HRT for the HTT reactor can be reduced from 1 hour to 0.5 hours, while decoupling SRT from HRT in the anaerobic acidification reactor (AAR) allows for further reductions. These design optimizations lead to smaller reactor volumes, cutting down equipment and construction costs. Despite these advancements, energy consumption remains comparable to conventional methods due to a novel heat recovery strategy, enhancing overall process productivity. The system also achieves in-situ CO 2 removal and ammonia stripping features, resulting in biogas with a methane purity level of 75%, and produces high-quality nitrogen fertilizer as an additional by-product. Public benefits of the IVAD system are substantial, contributing to sustainable waste management and renewable energy production. By providing a scalable solution that can be adopted by dairy farms and similar agricultural operations, the IVAD system helps reduce waste, produce renewable natural gas (RNG) suitable for transportation fuel, and generate fertilizer, supporting a circular economy. This project plays a role in achieving broader environmental objectives by mitigating greenhouse gas emissions and promoting energy independence. Additionally, it offers a pathway for farmers to lower operational costs while adopting practices that are both environmentally sustainable and economically advantageous.

03 NATURAL GAS↗