Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Effect of Deep Centers on Charge-Carrier Confinement in InGaN/GaN Quantum Wells and on LED Efficiency

The deep-center-assisted tunneling of carriers in p–n structures of light-emitting diodes (LEDs) with InGaN/GaN quantum wells (QWs) makes smaller the effective height of the injection barrier, but leads to a dependence of the radiation efficiency on the density and energy spectrum of defects in GaN. In the case of hopping conduction across the space charge region, the forward voltage mainly drops near the QW boundary, where the density of deep states at the quasi Fermi-level is the lowest. As a result, band bending at the boundary decreases, and, with increasing current, the direction of the electric field also changes, which leads to a weaker confinement of holes, to their non-radiative recombination in the n barrier, and to an efficiency droop. The low efficiency of green GaN LEDs is associated with the dominance of deep centers and insufficient density of shallow centers in the energy spectrum of defects in barrier layers near the boundaries with the QW. The proposed model is confirmed by the stepwise experimental dependences of the current, capacitance and efficiency of green and blue LEDs in the case of forward bias, which reflect the contribution of color centers responsible for the defect photoluminescence bands in GaN.

36 MATERIALS SCIENCE↗

Before Förster. Initial excitation in photosynthetic light harvesting

Electronic 2D spectroscopy allows nontrivial quantum effects to be explored in unprecedented detail. Here, we apply recently developed fluorescence detected coherent 2D spectroscopy to study the light harvesting antenna 2 (LH2) of photosynthetic purple bacteria. We report double quantum coherence 2D spectra which show clear cross peaks indicating correlated excitations. Similar results are found for rephasing and nonrephasing signals. Analysis of signal generating quantum pathways leads to the conclusion that, contrary to the currently prevailing physical picture, the two weakly coupled pigment rings of LH2 share the initial electronic excitation leading to quantum mechanical correlation between the two clearly separate absorption bands. These results are general and have consequences for the interpretation of initially created excited states not only in photosynthesis but in all light absorbing systems composed of weakly interacting pigments where the excitation transfer is commonly described by using Förster theory. Being able to spectrally resolve the nonequilibrium dynamics immediately following photoabsorption may provide a glimpse to the systems' transition into the Förster regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong diameter-dependence of nanowire emission coupled to waveguide modes

The emission from nanowires can couple to waveguide modes supported by the nanowire geometry, thus governing the far-field angular pattern. To investigate the geometry-induced coupling of the emission to waveguide modes, we acquire Fourier microscopy images of the photoluminescence of nanowires with diameters ranging from 143 to 208 nm. From the investigated diameter range, we conclude that a few nanometers difference in diameter can abruptly change the coupling of the emission to a specific mode. Moreover, we observe a diameter-dependent width of the Gaussian-shaped angular pattern in the far-field emission. This dependence is understood in terms of interference of the guided modes, which emit at the end facets of the nanowire. Our results are important for the design of quantum emitters, solid state lighting, and photovoltaic devices based on nanowires.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving hole injection and carrier distribution in InGaN light-emitting diodes by removing the electron blocking layer and including a unique last quantum barrier

The effects of removing the AlGaN electron blocking layer (EBL), and using a last quantum barrier (LQB) with a unique design in conventional blue InGaN light-emitting diodes (LEDs), were investigated through simulations. Compared with the conventional LED design that contained a GaN LQB and an AlGaN EBL, the LED that contained an AlGaN LQB with a graded-composition and no EBL exhibited enhanced optical performance and less efficiency droop. This effect was caused by an enhanced electron confinement and hole injection efficiency. Furthermore, when the AlGaN LQB was replaced with a triangular graded-composition, the performance improved further and the efficiency droop was lowered. The simulation results indicated that the enhanced hole injection efficiency and uniform distribution of carriers observed in the quantum wells were caused by the smoothing and thinning of the potential barrier for the holes. This allowed a greater number of holes to tunnel into the quantum wells from the p-type regions in the proposed LED structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Functional Nanomaterials with Tunable Plasmonic and Emittive Properties (Final Project Report)

The goal of the project is on understanding the principles of non-covalent assembling of tunable functional materials with various nanocrystals in order to control light-matter interactions by changing localized interfacial refractive properties, coupling parameters, or the ionic environment of surrounding media. We explore novel soft functional matrices with controlled physical properties via the application of light, mechanical stresses, ionic environment, and electrical potential. These functional matrices is used in conjunction with novel anisotropic inorganic nanostructures such as noble metal/metal alloy anisotropic nanostructures with complex optical properties (multiple LSPR modes) and quantum dots with light-emissive or absorbing properties in a broad spectral range from the UV to the NIR for efficient solar energy absorption and light conversion.

36 MATERIALS SCIENCE↗

Two-photon interferometry for high-resolution imaging

We discuss advantages of using non-classical states of light for two aspects of optical imaging: creating of miniature images on photosensitive substrates, which constitutes the foundation for optical lithography, and conversely, imaging of micro objects. In both cases, the classical resolution limit given by the Rayleigh criterion is approximately a half of the optical wavelength. It has been shown, however, that by using multi-photon quantum states of the light field, and multi-photon sensitive material or detector, this limit can be surpassed. In the present work, we give a rigorous quantum mechanical treatment of this problem, address some particularly widespread misconceptions and discuss the requirements arising on the way of turning the research on quantum imaging into a practical technology.

quantum technology↗

Quantum Plasmonic Sensing Beyond the Classical Limit

The ultimate sensitivity of any optically based measurement using classical resources (for example, laser or thermal light) is constrained by the photon shot noise limit (SNL). However, quantum states of light, in which photon pairs have quantum correlations or entanglement, off er a path beyond this limit. In particular, “squeezing” in these quantum states makes it possible to lower the noise in the detection system below the SNL. This can signifi cantly enhance the sensitivity of real-world devices and could thus revolutionize optical-based sensing applications

47 OTHER INSTRUMENTATION↗

Theoretical performance of solar cell based on mini-bands quantum dots

The tremendous amount of research in solar energy is directed toward intermediate band solar cell for its advantages compared with the conventional solar cell. The latter has lower efficiency because the photons have lower energy than the bandgap energy and cannot excite mobile carriers from the valence band to the conduction band. On the other hand, if mini intermediate band is introduced between the valence and conduction bands, then the smaller energy photons can be used to promote charge carriers transfer to the conduction band and thereby the total current increases while maintaining a large open circuit voltage. In this article, the influence of the new band on the power conversion efficiency for structure of quantum dots intermediate band solar cell is theoretically investigated and studied. The time-independent Schrödinger equation is used to determine the optimum width and location of the intermediate band. Accordingly, achievement of a maximum efficiency by changing the width of quantum dots and barrier distances is studied. Theoretical determination of the power conversion efficiency under the two different ranges of QD width is presented. From the obtained results, the maximum power conversion efficiency is about 70.42%. It is carried out for simple cubic quantum dot crystal under fully concentrated light. It is strongly dependent on the width of quantum dots and barrier distances.

14 SOLAR ENERGY↗

A light weight regularization for wave function parameter gradients in quantum Monte Carlo

The parameter derivative of the expectation value of the energy, ∂E/∂p, is a key ingredient in variational Monte Carlo (VMC) wave function optimization methods. In some cases, a naïve estimate of this derivative suffers from an infinite variance, which inhibits the efficiency of optimization methods that rely on a stable estimate of the derivative. In this work, we derive a simple regularization of the naïve estimator, which is trivial to implement in existing VMC codes, has finite variance, and a negligible bias, which can be extrapolated to zero bias with no extra cost. We use this estimator to construct an unbiased, finite variance estimation of ∂E/∂p for a multi-Slater–Jastrow trial wave function on the LiH molecule and in the optimization of a multi-Slater–Jastrow trial wave function on the CuO molecule. This regularized estimator is a simple and efficient estimator of ∂E/∂p for VMC optimization techniques.

36 MATERIALS SCIENCE↗

Design tradeoffs between traditional hexagonal and emerging cubic In X Ga (1–X) N/GaN-based green light-emitting diodes

Here, we report on the design tradeoffs between traditional hexagonal and emerging cubic In X Ga (1–X) N/GaN -based green (520 nm≤ λ ≤550 nm) light-emitting diodes with special emphasis on the electron blocking layer, number of quantum wells, and thicknesses of quantum wells and barriers. We identified three crucial design rules for cubic green light-emitting diodes: (1) no need for an electron blocking layer; (2) use of a wide quantum well; and (3) choice of thin quantum barriers in multi-quantum well light-emitting diode designs. These design rules increase the internal quantum efficiency of cubic green light-emitting diodes by ~30.5% under 100A/cm 2 injection with respect to traditional designs. Overall, the design rules of cubic light-emitting diodes and their differentiating nature from the traditional, hexagonal ones are crucial for the advent of next-generation cubic light-emitting diodes.

42 ENGINEERING↗

Electroluminescence of InGaAs/GaAs quantum-size heterostructures with (III, Mn)V and Ni ferromagnetic injectors

Electroluminescence characteristics of light-emitting diodes based on InGaAs/GaAs quantum well heterostructures with an injector layer made of ferromagnetic metal (Ni), semimetal compound (MnSb), or magnetic semiconductor (InMnAs) were comparatively studied. The general feature is electroluminescence quenching as the spacer layer thickness between a quantum well and a magnetic injector decreases. It was found that the temperature dependence of the electroluminescence in diodes with Ni and MnSb is caused by thermal ejection of carriers from the quantum well; in diodes with InMnAs, it is caused by the temperature dependence of the carrier concentration in magnetic semiconductor and thermal ejection of carriers from the quantum well in the high-temperature region.

36 MATERIALS SCIENCE↗

QCD and Light-Front Holography

The soft-wall AdS/QCD model, modified by a positive-sign dilaton metric, leads to a remarkable one-parameter description of nonperturbative hadron dynamics. The model predicts a zero-mass pion for zero-mass quarks and a Regge spectrum of linear trajectories with the same slope in the leading orbital angular momentum L of hadrons and the radial quantum number N. Light-Front Holography maps the amplitudes which are functions of the fifth dimension variable z of anti-de Sitter space to a corresponding hadron theory quantized on the light front. The resulting Lorentz-invariant relativistic light-front wave equations are functions of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. The result is to a semi-classical frame-independent first approximation to the spectra and light-front wavefunctions of meson and baryon light-quark bound states, which in turn predict the behavior of the pion and nucleon form factors. The theory implements chiral symmetry in a novel way: the effects of chiral symmetry breaking increase as one goes toward large interquark separation, consistent with spectroscopic data, and the the hadron eigenstates generally have components with different orbital angular momentum; e.g., the proton eigenstate in AdS/QCD with massless quarks has L = 0 and L = 1 light-front Fock components with equal probability. The soft-wall model also predicts the form of the non-perturbative effective coupling {alpha}{sub s}{sup AdS} (Q) and its {beta}-function which agrees with the effective coupling {alpha}{sub g1} extracted from the Bjorken sum rule. The AdS/QCD model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms. A new perspective on quark and gluon condensates is also reviewed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaAs/GaP Quantum-Well Heterostructures Grown on Si Substrates

Molecular-beam epitaxy is used to produce GaP/Si hybrid substrates that allow the growth of highly efficient light-emitting heterostructures with GaAs/GaP quantum wells. Despite the relatively high concentration of nonradiative-recombination centers in GaP/Si layers, GaAs/GaP quantum-well heterostructures grown on GaP/Si hybrid substrates are highly competitive in terms of efficiency and temperature stability of luminescence to similar heterostructures grown on lattice-matched GaP substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗