Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Processing study of a polyimidesulfone adhesive

An adhesive bonding process cycle study was performed for a polyimidesulfone (PISO2) recently developed as a promising structural adhesive. The high molecular weight, linear aromatic system possesses properties which make it attractive as a processable, low-cost material for elevated temperature applications. The results of a study to better understand the parameters that affect the adhesive properties of the polymer for titanium alloy adherends are detailed. These include the tape preparation, the use of a primer, and press and simulated autoclave processing conditions. The polymer was characterized using Fourier Transform Infrared Spectroscopy, glass transition temperature determination, flow measurements, and weight loss measurements. The adhesive's strength determined by lap shear strength tests was used to evaluate the effects of the bonding process variations. Higher lap shear strengths were obtained at room temperature when a primer (PISO2) was used; however, the results were the same at 232 C (450 F) with or without a primer. The use of a vacuum (simulated autoclave cycle) during titanium bonding produced similar lap shear strengths to those specimens bonded without a vacuum.

Progar, D. J.↗
NASA NTRS1984

Separation processes during binary monotectic alloy production

Observation of microgravity solidification processes indicates that outside of sedimentation, at least two other important effects can separate the phases: critical-point wetting and spreading; and thermal migration of second-phase droplets due to interfacial tension gradients. It is difficult to study these surface tension effects while in a unit gravity field. In order to investigate the processes occurring over a temperature range, i.e., between a consolute point and the monotectic temperature, it is necessary to use a low-gravity environment. The MSFC drop tube (and tower), the ballistic trajectory KC-135 airplane, and the Space Shuttle are ideal facilities to aid formation and testing of hypotheses. Much of the early work in this area focuses on transparent materials so that process dynamics may be studied by optical techniques such as photography for viewing macro-processes; holography for studying diffusional growth; spinodal decomposition and coalescence; ellipsometry for surface wetting and spreading effects; and interferometry and spectroscopy for small-scale spatial resolution of concentration profiles.

Frazier, D. O.↗
NASA NTRS1983

Signal processing at the Poker Flat MST radar

Signal processing for Mesosphere-Stratosphere-Troposphere (MST) radar is carried out by a combination of hardware in high-speed, special-purpose devices and software in a general-purpose, minicomputer/array processor. A block diagram of the signal processing system is presented, and the steps in the processing pathway are described. The current processing capabilities are given, and a system offering greater coherent integration speed is advanced which hinges upon a high speed preprocessor.

Carter, D. A.↗
NASA NTRS1984

Computer Aided Modeling and Post Processing with NASTRAN Analysis

Computer aided engineering systems are invaluable tools in performing NASTRAN finite element analysis. These techniques are implemented in both the pre-processing and post-processing phases of the NASTRAN analysis. The finite element model development, or pre-processing phase, was automated with a computer aided modeling program called Supertabl, and the review and interpretation of the results of the NASTRAN analysis, or post-processing phase, was automated with a computer aided plotting program called Output Display. An intermediate program, Nasplot, which was developed in-house, has also helped to cut down on the model checkout time and reduce errors in the model. An interface has been established between the finite element computer aided engineering system and the Learjet computer aided design system whereby data can be transferred back and forth between the two. These systems have significantly improved productivity and the ability to perform NASTRAN analysis in response to product development requests.

Boroughs, R. R.↗
NASA NTRS1983

Investigation of test methods, material properties and processes for solar cell encapsulants

The goal of the program is to identify, test, evaluate and recommend encapsulation materials and processes for the fabrication of cost-effective and long life solar modules. Of the $18 (1948 $) per square meter allocated for the encapsulation components approximately 50% of the cost ($9/sq m) may be taken by the load bearing component. Due to the proportionally high cost of this element, lower costing materials were investigated. Wood based products were found to be the lowest costing structural materials for module construction, however, they require protection from rainwater and humidity in order to acquire dimensional stability. The cost of a wood product based substrate must, therefore, include raw material costs plus the cost of additional processing to impart hygroscopic inertness. This protection is provided by a two step, or split process in which a flexible laminate containing the cell string is prepared, first in a vacuum process and then adhesively attached with a back cover film to the hardboard in a subsequent step.

Willis, P. B.↗
NASA NTRS1984

Study of the sulphur-containing molecules in the EUV region. IV - The dissociation processes of SO2 in the 760 A region

The fluoresence throughout the VUV and violet regions has been observed from photoexcitation of SO2, and the absolute fluorescence cross sections of the VUV emissions have been measured at selected atomic emission lines and in the synchrotron radiation continuum from 550 to 760 A. Emissions from the O I 1304 A and several S I lines account for the fluorescence observed in the VUV region, while the fluorescence observed in the UV and violet regions is due to excited SO and, also, possibly to excited SO2(+) and SO(+). Structure in the VUV fluorescence excitation function is attributed to predissociation of Rydberg states. The VUV fluorescence resulting from an O2 elimination process, SO2 + h times nu yielding metastable S + O2, has been observed in the present work although the threshold for this process has not been determined. The threshold corresponding to the total dissociation process, SO2 + h times nu yielding metastable S + 2O, has been measured and found to agree reasonably with the expected value calculated from thermochemical data. The processes for the formation of S(+) are also discussed.

Wu, C. Y. R.↗
NASA NTRS1984

The APL image processing laboratory

The present and proposed capabilities of the Central Image Processing Laboratory, which provides a powerful resource for the advancement of programs in missile technology, space science, oceanography, and biomedical image analysis, are discussed. The use of image digitizing, digital image processing, and digital image output permits a variety of functional capabilities, including: enhancement, pseudocolor, convolution, computer output microfilm, presentation graphics, animations, transforms, geometric corrections, and feature extractions. The hardware and software of the Image Processing Laboratory, consisting of digitizing and processing equipment, software packages, and display equipment, is described. Attention is given to applications for imaging systems, map geometric correction, raster movie display of Seasat ocean data, Seasat and Skylab scenes of Nantucket Island, Space Shuttle imaging radar, differential radiography, and a computerized tomographic scan of the brain.

Jenkins, J. O.↗
NASA NTRS1984

Digital processing considerations for extraction of ocean wave image spectra from raw synthetic aperture radar data

The digital processing requirements of several algorithms for extracting the spectrum of a detected synthetic aperture radar (SAR) image from the raw SAR data are described and compared. The most efficient algorithms for image spectrum extraction from raw SAR data appear to be those containing an intermediate image formation step. It is shown that a recently developed compact formulation of the image spectrum in terms of the raw data is computationally inefficient when evaluated directly, in comparison with the classical method where matched-filter image formation is an intermediate result. It is also shown that a proposed indirect procedure for digitally implementing the same compact formulation is somewhat more efficient than the classical matched-filtering approach. However, this indirect procedure includes the image formation process as part of the total algorithm. Indeed, the computational savings afforded by the indirect implementation are identical to those obtained in SAR image formation processing when the matched-filtering algorithm is replaced by the well-known 'dechirp-Fourier transform' technique. Furthermore, corrections to account for slant-to-ground range conversion, spherical earth, etc., are often best implemented in the image domain, making intermediate image formation a valuable processing feature.

Lahaie, I. J.↗
NASA NTRS1984

Processing study of a high temperature adhesive

An adhesive-bonding process cycle study was performed for a polyimidesulphone. The high molecular weight, linear aromatic system possesses properties which make it attractive as a processable, low-cost material for elevated temperature applications. The results of a study to better understand the parameters that affect the adhesive properties of the polymer for titanium alloy adherends are presented. These include the tape preparation, the use of a primer and press and simulated autoclave processing conditions. The polymer was characterized using Fourier transform infrared spectroscopy, glass transition temperature determination, flow measurements, and weight loss measurements. The lap shear strength of the adhesive was used to evaluate the effects of the bonding process variations.

Progar, D. J.↗
NASA NTRS1983

Overview of the NASA materials processing in space program

The NASA Materials Processing in Space (MPS) Program has roots which go back to early observations of fluid materials behavior in low gravity which were made during the Apollo flights of the late sixties. A few years later the MPS program became established formally in organization and budget. Its goals today are to improve fundamental understanding of the role of gravity in the processing of materials, to provide facilities for low-gravity experimentation with, and low-gravity processing of, candidate materials, and to assist American industry in the early commercialization of space processing. A continuing element of this program is through ground-based research to yield new knowledge, to establish a need for flight experimentation, and to identify the conditions, controls, and data for maximum use of this presently limited resource. To this program element, which must continue, the period of space experimentation has now been joined with the successful inauguration of the Space Shuttle flights.

Testardi, L. R.↗
NASA NTRS1983

User alternatives in post-processing for raster-to-vector conversion

A number of Landsat-based coniferous forest stratum maps have been created of the Eldorado National Forest in California. These maps were produced in raster image format which is not directly usable by the U.S. Forest Service's vector-based Wildland Resource Information System (WRIS). As a solution, raster-to-vector conversion software has been developed for processing classified images into polygonal data structures. Before conversion, however, the digital classification images must be simplified to remove high spatial variance ('noise', 'speckle') and meet a USFS ten acre minimum requirement. A post-processing (simplification) strategy different from those commonly used in raster image processing may be desired for preparing maps for conversion to vector format, because simplification routines typically permit diagonal connections in the process of reclassifying pixels and forming new polygons. Diagonal connections are often undesirable when converting to vector format because they permit polygons to effectively cross over each other and occupy a common location. Three alternative methodologies are discussed for simplifying raster data for conversion to vector format.

Logan, T. L.↗
NASA NTRS1984

Processing of sintered alpha SiC

Processing methods of sintered alpha SiC for engine applications are developed in a cost effective manner, using a submicron sized powder blended with sintering aids (boron and carbon). The processes for forming a green powder compact, such as dry pressing, cold isostatic pressing and green machining, slip casting, aqueous extrusion, plastic extrusion, and injection molding, are described. Dry pressing is the simplest route to component fabrication, and is carried out at approximately 10,000 psi pressure, while in the cold isostatic method the pressure could go as high as 20,000 psi. Surfactants are added to control settling rates and casting characteristics in the slip casting. The aqueous extrusion process is accomplished by a hydraulic ram forcing the aqueous mixture through a die. The plastic forming processes of extrusion and injection molding offer the potential of greater diversity in shape capacity. The physical properties of sintered alpha SiC (hardness, Young's modulus, shear modulus, and thermal diffusivity) are extensively tested. Corrosion resistance test results of silicon carbide are included.

Storm, R. S.↗
NASA NTRS1985

Process thresholds: Report of Working Group Number 3

The Process Thresholds Working Group concerned itself with whether a geomorphic process to be monitored on satellite imagery must be global, regional, or local in its effect on the landscape. It was pointed out that major changes in types and magnitudes of processes operating in an area are needed to be detectable on a global scale. It was concluded from a review of geomorphic studies which used satellite images that they do record change in landscape over time (on a time-lapse basis) as a result of one or more processes. In fact, this may be one of the most important attributes of space imagery, in that one can document land form changes in the form of a permanent historical record. The group also discussed the important subject of the acquisition of basic data sets by different satellite imaging systems. Geomorphologists already have available one near-global basis data set resulting from the early LANDSAT program, especially images acquired by LANDSATs 1 and 2. Such historic basic data sets can serve as a benchmark for comparison with landscape changes that take place in the future. They can also serve as a benchmark for comparison with landscape changes that have occurred in the past (as recorded) by images, photography and maps.

Williams, R. S., Jr.↗
NASA NTRS1985

The use of analogs in the innovation process - A software engineering protocol analysis

A human information processing account of how experienced practitioners utilize analogs in the innovation process is presented. The protocols of several practitioners are collected and analyzed. The problem behavior graphs, knowledge elements utilized, and operator elements applied are described, and a descriptive model of the innovation process is assembled. Implications for a production system, deviations from other models of the innovation process, and extensions to other models of the analogy procedure are explored.

Silverman, B. G.↗
NASA NTRS1985

Factors Affecting the Processing of Epoxy Film Adhesives

The increasing awareness that adhesive performance is controlled not only by the condition of the adherend surface but also the condition or state of the adhesive and the process parameters used during fabrication is expected to result in improved reliability, as well as bond performance. The critical process variables which have been found to control adhesive bond formation and ultimate bond strength in 250F and 350F curing epoxy adhesives are described in terms of fabrication parameters and adhesive characteristics. These include the heat-up rate and cure temperature during processing and the adhesive moisture content and age condition (degree of advancement). The diagnostic methods used to delineate the effects of these process variables on adhesive performance are illustrated. These are dielectric, thermomechanical (TMA) and dynamic mechanical (DMA) analyses. Correlation of test results with measured mechanical tensile lap shear strengths of bonded joints is presented and the results briefly discussed in terms of the additives and hardeners used in the adhesive systems.

Pike, R. A.↗
NASA NTRS1983

Solid waste treatment processes for space station

The purpose of this study was to evaluate the state-of-the-art of solid waste(s) treatment processes applicable to a Space Station. From the review of available information a source term model for solid wastes was determined. An overall system is proposed to treat solid wastes under constraints of zero-gravity and zero-leakage. This study contains discussion of more promising potential treatment processes, including supercritical water oxidation, wet air (oxygen) oxidation, and chemical oxidation. A low pressure, batch-type treament process is recommended. Processes needed for pretreatment and post-treatment are hardware already developed for space operations. The overall solid waste management system should minimize transfer of wastes from their collection point to treatment vessel.

Marrero, T. R.↗
NASA NTRS1986

A silane-based polysilicon process

A silane based polysilicon process plant was constructed in Miami, Oklahoma. The processes included: the synthesis of crude silane gas, ultrapurification of the gas, and direct pyrolysis to product silicon. Features of the process provided for direct continuous operation from process feed to final product, without the requirement to store intermediates or even convert the silane to a liquid phase. Semiconductor product quality as analyzed internally was demonstrated by the first integrated operation of the plant.

Grayson, P. E.↗
NASA NTRS1985

A computer-assisted process for supersonic aircraft conceptual design

Design methodology was developed and existing major computer codes were selected to carry out the conceptual design of supersonic aircraft. A computer-assisted design process resulted from linking the codes together in a logical manner to implement the design methodology. The process does not perform the conceptual design of a supersonic aircraft but it does provide the designer with increased flexibility, especially in geometry generation and manipulation. Use of the computer-assisted process for the conceptual design of an advanced technology Mach 3.5 interceptor showed the principal benefit of the process to be the ability to use a computerized geometry generator and then directly convert the geometry between formats used in the geometry code and the aerodynamics codes. Results from the interceptor study showed that a Mach 3.5 standoff interceptor with a 1000 nautical-mile mission radius and a payload of eight Phoenix missiles appears to be feasible with the advanced technologies considered. A sensitivity study showed that technologies affecting the empty weight and propulsion system would be critical in the final configuration characteristics with aerodynamics having a lesser effect for small perturbations around the baseline.

Johnson, V. S.↗