Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Ce 3 - x Mg x Co 9 : Transformation of a Pauli Paramagnet into a Strong Permanent Magnet

In this article we report on the synthesis of single-crystal and polycrystalline samples of Ce 3-x Mg x Co 9 solid solution (0 ≤ x ≲ 1.4) and characterization of their structural and magnetic properties. The crystal structure remains rhombohedral in the whole composition range and Mg partially replaces Ce in the 6c site of the CeCo 3 structure. Ferromagnetism is induced by Mg substitutions starting as low as x = 0.18 and reaching a Curie temperature as high as 450 K for x = 1.35 . Measurements on single crystals with x = 1.34 and T C = 440 K indicate an axial magnetic anisotropy with an anisotropy field of 6 T and a magnetization of 6 μ B /f.u. at 300 K. Coercicity is observed in the polycrystalline samples consistent with the observed axial magnetic anisotropy. Our discovery of ferromagnetism with large axial magnetic anisotropy induced by substituting a rare-earth element by Mg is a very promising result in the search of inexpensive permanent-magnet materials and suggests that other nonmagnetic phases, similar to CeCo 3 , may also conceal nearby ferromagnetic phases.

36 MATERIALS SCIENCE↗

Synthesis, Structural and Electrical properties of Bi{sub 4}Ti{sub 3}O{sub 12} and Bi{sub 3.5}La{sub 0.5}Ti{sub 3}O{sub 12} Ferroelectric ceramics

Polycrystalline ceramic samples of Bi{sub 4}Ti{sub 3}O{sub 12} and the La-doped Bi{sub 3.5}La{sub 0.5}Ti{sub 3}O{sub 12} have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on the structure of Bi{sub 4}Ti{sub 3}O{sub 12} powders was investigated by X-ray diffraction. A better agreement between the observed and calculated X-Ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non centrosymmetric space group Fmmm. Rietveld analysis revealed that with the partial substitution of La on the Bi site increases the a and b lattice parameters and decreases the c parameter. The activation energies calculated from dc conductivities are 1.033 eV and 2.244 eV which shows that La doping increases the resistivity of the material useful for dielectric devices.

36 MATERIALS SCIENCE↗

Observation of Square-Planar Distortion in Lanthanide-Doped Skutterudite Crystals

Skutterudite crystals are of interest for their thermoelectric properties and in particular for the flexibility the structure offers for tuning such properties. One strategy to enhance the thermoelectric capabilities of these structures is to dope the “cage” site to disrupt phonon modes. Observation of such changes in these structures on the atomic scale is challenging, however, and understanding atomic-scale changes is crucial to understanding its macroscopic properties. Here, a series of polycrystalline Co2Ni2Sb8Sn4 skutterudites doped with Ce, Dy, and Yb were synthesized. Using scanning transmission electron microscopy, we observe small tilts in the square-planar Sb–Sn rings. Using density functional theory to calculate a relaxed structure, we attribute these distortions to under-bonding of the rings with the lanthanide dopants.

36 MATERIALS SCIENCE↗

Room temperature ferroelectricity in continuous croconic acid thin films

Ferroelectricity at room temperature has been demonstrated in nanometer-thin quasi 2D croconic acid thin films, by the polarization hysteresis loop measurements in macroscopic capacitor geometry, along with observation and manipulation of the nanoscale domain structure by piezoresponse force microscopy. The fabrication of continuous thin films of the hydrogen-bonded croconic acid was achieved by the suppression of the thermal decomposition using low evaporation temperatures in high vacuum, combined with growth conditions far from thermal equilibrium. For nominal coverages ≥20 nm, quasi 2D and polycrystalline films, with an average grain size of 50–100 nm and 3.5 nm roughness, can be obtained. Spontaneous ferroelectric domain structures of the thin films have been observed and appear to correlate with the grain patterns. The application of this solvent-free growth protocol may be a key to the development of flexible organic ferroelectric thin films for electronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin gaps in the ordered states of La 2 Li X O 6 ( X = Ru , Os ) and their relation to the distortion of the cubic double perovskite structure in 4 d 3 and 5 d 3 magnets

Time-of-flight inelastic neutron scattering measurements have been carried out on polycrystalline samples of the 4d 3 and 5d 3 double pervoskite antiferromagnets La 2 LiRuO 6 and La 2 LiOsO 6 . These reveal the development of an inelastic spin gap in La 2 LiRuO 6 and La 2 LiOsO 6 of ~1.8(8) and 6(1) meV, below their respective ordering temperatures TN, ~23.8 and 30 K. The bandwidths of the spin excitations are shown to be ~5.7(9)and12(1)meV, respectively, at low temperatures. Spin gaps are surprising in such magnets as the t 2g levels of Ru 5+ or Os 5+ are expected to be half-filled, resulting in an anticipated orbital singlet for both materials. We compare these results in monoclinic double perovskites La 2 LiRuO 6 and La 2 LiOsO 6 with those in cubic Ba 2 YRuO 6 and Ba 2 YOsO 6 as well as with those in other monoclinic La 2 NaRuO 6 ,La 2 NaOsO 6 , and Sr 2 ScOsO 6 and model the inelastic magnetic scattering with linear spin-wave theory using minimal anisotropic exchange interactions. We discuss the possible role of the distortion of the face-centered-cubic double perovskite structure on the spin gap formation and geometric frustration in these materials and show that T N scales with the top of the spin-wave band in all members of these families that display long-range order.

36 MATERIALS SCIENCE↗

Properties of the Barium–Strontium Titanate Films Deposited onto the Silicon Substrate by rf Cathode Sputtering

Using rf cathode sputtering of a target in the oxygen atmosphere, Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} solid solution thin films have been formed on the single-crystal Si(001) cut surface and their crystal structure, microstructure, and optical characteristics have been investigated. It is shown that the films are optically anisotropic, polycrystalline, and have a c axis preferred direction perpendicular to the substrate. The a and b axes in the substrate plane have no preferred direction. It has been established that, during the synthesis, a buffer layer with a thickness of about 20 nm forms between the film and substrate, which is optically equivalent to silicon oxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of Pr{sub 18}Li{sub 8}Fe{sub 5-x}M{sub x}O{sub 39} (M=Ru, Mn, Co)

A polycrystalline sample of Pr{sub 18}Li{sub 8}Fe{sub 4}RuO{sub 39} has been synthesized by a solid state method and characterized by neutron powder diffraction, magnetometry and Moessbauer spectroscopy; samples of Pr{sub 18}Li{sub 8}Fe{sub 5-x}Mn{sub x}O{sub 39} and Pr{sub 18}Li{sub 8}Fe{sub 5-x}Co{sub x}O{sub 39} (x=1, 2) have been studied by magnetometry. All these compounds adopt a cubic structure (space group Pm3-barn, a{sub 0}{approx}11.97 A) based on intersecting <111> chains made up of alternating octahedral and trigonal-prismatic coordination sites. These chains occupy channels within a Pr-O framework. The trigonal-prismatic site in Pr{sub 18}Li{sub 8}Fe{sub 4}RuO{sub 39} is occupied by Li{sup +} and high-spin Fe{sup 3+}. The remaining transition-metal cations occupy the two crystallographically-distinct octahedral sites in a disordered manner. All five compositions adopt a spin-glass-like state at 7 K (Pr{sub 18}Li{sub 8}Fe{sub 4}RuO{sub 39}) or below. - Graphical abstract: Pr{sub 18}Li{sub 8}Fe{sub 5-x}M{sub x}O{sub 39} (M=Ru, Mn, Co) have been studied by neutron diffraction, Moessbauer spectroscopy and magnetometry, allowing the distribution of the different cation species over the octahedral and trigonal-prismatic coordination sites within the structure to be determined. All the compositions studied undergo a transition to a spin-glass-like phase on cooling below {approx}5 K.

36 MATERIALS SCIENCE↗

The local environment of cobalt in amorphous, polycrystalline and epitaxial anatase TiO{sub 2}:Co films produced by cobalt ion implantation

Amorphous, polycrystalline anatase and epitaxial anatase TiO{sub 2} films have been implanted with 5 at. % Co{sup +}. The magnetic and structural properties of different microstructures of TiO{sub 2}:Co, along with the local coordination of the implanted Co atoms within the host lattice are investigated. In amorphous TiO{sub 2}:Co film, Co atoms are in the (II) oxidation state with a complex coordination and exhibit a paramagnetic response. However, for the TiO{sub 2}:Co epitaxial and polycrystalline anatase films, Co atoms have a distorted octahedral (II) oxygen coordination assigned to a substitutional environment with traces of metallic Co clusters, which gives a rise to a superparamagnetic behavior. Despite the incorporation of the implanted atoms into the host lattice, high temperature ferromagnetism is absent in the films. On the other hand, it is found that the concentration and size of the implantation-induced nanoclusters and the magnetic properties of TiO{sub 2}:Co films have a strong dependency on the initial microstructure of TiO{sub 2}. Consequently, metallic nanocluster formation within ion implantation prepared transition metal doped TiO{sub 2} can be suppressed by tuning the film microstructure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanocone Tip-Film Solar Cells with Efficient Charge Transport

Nanojunctions promise to provide higher charge transport efficiencies and less costly solar cell fabrication methods. We report a three-dimensional (3D) solar cell structure based on interdigitated nanojunctions formed with the tips of n-type ZnO nanocones embedded in a p-type polycrystalline (PX) CdTe film. This 3D nanocone tip-film cell, without optimization, enabled 3.2% power conversion efficiency, higher than that produced by a planar solar cell fabricated using the same materials. Reducing CdTe grain size and enriching the grain boundaries with chlorine improved the conversion efficiency for the tip-film structure. This higher conversion efficiency is attributable to improved charge transport in the nanojunction due to a combination of the high electric field generated in the CdTe and the utilization of the small junction area. The high field facilitates the extraction of minority carriers from the photoactive layer to the small junction region, while the use of the small junction area reduces the total electron recombination loss. The improved carrier transport in the nanocone tip-film junction implies that nanocone-based photovoltaic solar cells are capable of tolerating the imperfect materials produced using low-cost fabrication methods.

14 SOLAR ENERGY↗

One-pot template-free synthesis of mesoporous boehmite core-shell and hollow spheres by a simple solvothermal route

Uniform-sized and monodispersed boehmite core-shell and hollow spheres have been successfully synthesized using a template-free solvothermal route. The experimental parameters such as reaction duration, the trisodium citrate amounts and solvents are shown to play important roles in the formation of the AlOOH core-shell and hollow spheres. X-ray diffraction, Fourier transform IR, thermal gravimetric analysis, N{sub 2} adsorption/desorption, scanning electron microscopy, transmission electron microscopy, and high-resolution TEM were used to characterize the products. The results show that the prepared polycrystalline hollow spheres are composed of well-aligned AlOOH nanowires and have an orthorhombic structure. Finally, a dissolution-renucleation mechanism was proposed for the formation of boehmite hollow structures.

36 MATERIALS SCIENCE↗

Manipulating the diffusion energy barrier at the lithium metal electrolyte interface for dendrite-free long-life batteries

Abstract Constructing an artificial solid electrolyte interphase (SEI) on lithium metal electrodes is a promising approach to address the rampant growth of dangerous lithium morphologies (dendritic and dead Li 0 ) and low Coulombic efficiency that plague development of lithium metal batteries, but how Li + transport behavior in the SEI is coupled with mechanical properties remains unknown. We demonstrate here a facile and scalable solution-processed approach to form a Li 3 N-rich SEI with a phase-pure crystalline structure that minimizes the diffusion energy barrier of Li + across the SEI. Compared with a polycrystalline Li 3 N SEI obtained from conventional practice, the phase-pure/single crystalline Li 3 N-rich SEI constitutes an interphase of high mechanical strength and low Li + diffusion barrier. We elucidate the correlation among Li + transference number, diffusion behavior, concentration gradient, and the stability of the lithium metal electrode by integrating phase field simulations with experiments. We demonstrate improved reversibility and charge/discharge cycling behaviors for both symmetric cells and full lithium-metal batteries constructed with this Li 3 N-rich SEI. These studies may cast new insight into the design and engineering of an ideal artificial SEI for stable and high-performance lithium metal batteries.

25 ENERGY STORAGE↗

Online in situ x-ray diffraction setup for structural modification studies during swift heavy ion irradiation

The high energy density of electronic excitations due to the impact of swift heavy ions can induce structural modifications in materials. We present an x-ray diffractometer called ALIX (''Analyse en Ligne sur IRRSUD par diffraction de rayons X''), which has been set up at the low-energy beamline (IRRadiation SUD - IRRSUD) of the Grand Accelerateur National d'Ions Lourds facility, to allow the study of structural modification kinetics as a function of the ion fluence. The x-ray setup has been modified and optimized to enable irradiation by swift heavy ions simultaneously to x-ray pattern recording. We present the capability of ALIX to perform simultaneous irradiation-diffraction by using energy discrimination between x-rays from diffraction and from ion-target interaction. To illustrate its potential, results of sequential or simultaneous irradiation-diffraction are presented in this article to show radiation effects on the structural properties of ceramics. Phase transition kinetics have been studied during xenon ion irradiation of polycrystalline MgO and SrTiO{sub 3}. We have observed that MgO oxide is radiation-resistant to high electronic excitations, contrary to the high sensitivity of SrTiO{sub 3}, which exhibits transition from the crystalline to the amorphous state during irradiation. By interpreting the amorphization kinetics of SrTiO{sub 3}, defect overlapping models are discussed as well as latent track characteristics. Together with a transmission electron microscopy study, we conclude that a single impact model describes the phase transition mechanism.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stability, growth, and doping of In 2 (Si, Ge) 2 O 7 : Promising n -type wide-bandgap semiconductors

In this paper, we investigate, computationally and experimentally, the phase stability, electronic structure properties, and the propensity for n-type doping of In 2 X 2 O 7 (X = Si, Ge) ternary oxides. This family of materials contains promising novel wide-gap semiconductors based on their estimated high n-type Baliga figures of merit and acceptable thermal conductivity for power electronics applications. Here, we predict that both In 2 Si 2 O 7 and In 2 Ge 2 O 7 are n-type dopable, with Zr providing between 10 16 and above 10 21 cm −3 net donor concentrations under O-poor conditions, depending on the chemistry, structure (ground-state thortveitite or high-pressure pyrochlore), and synthesis temperature. To verify our predictions, we synthesize Zr-doped In 2 Ge 2 O 7 in the thortveitite structure and measure its electrical properties. Initial thin-film growth and annealing lead to polycrystalline thin films with bandgaps over 4 eV and confirm Zr doping predictions by achieving electron concentrations at 10 14 –10 16 cm −3 even under O-rich conditions. While future epitaxial growth development is still needed, this study establishes In 2 X 2 O 7 as promising n-type wide-gap semiconductors for power electronic applications.

36 MATERIALS SCIENCE↗

Developing a novel hierarchical approach for multiscale structural reliability predictions for ultra-high consequence applications

Microstructural variabilities are among the predominant sources of uncertainty in structural performance and reliability. We seek to develop efficient algorithms for multiscale calcu- lations for polycrystalline alloys such as aluminum alloy 6061-T6 in environments where ductile fracture is the dominant failure mode. Our approach employs concurrent multiscale methods, but does not focus on their development. They are a necessary but not sufficient ingredient to multiscale reliability predictions. We have focused on how to efficiently use concurrent models for forward propagation because practical applications cannot include fine-scale details throughout the problem domain due to exorbitant computational demand. Our approach begins with a low-fidelity prediction at the engineering scale that is sub- sequently refined with multiscale simulation. The results presented in this report focus on plasticity and damage at the meso-scale, efforts to expedite Monte Carlo simulation with mi- crostructural considerations, modeling aspects regarding geometric representation of grains and second-phase particles, and contrasting algorithms for scale coupling.

36 MATERIALS SCIENCE↗

Behavior of deuterium retention and surface morphology for VPS–W/F82H

The deuterium (D) retention for Vacuum Plasma Spray (VPS)–tungsten (W)/F82H was studied using two different implantation methods, namely D plasma exposure and View the MathML source implantation. The D retention for polished VPS–W/F82H after plasma exposure was found to be reduced compared to that for polycrystalline tungsten. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations indicated that porous structures around grain boundaries and the interface between VPS–W layers would be potential D diffusion paths, leading to low D retention. In the case of View the MathML source implantation, the shape of D2 TDS spectrum was almost the same as that for D plasma-exposed VPS–W/F82H; however, the D retention was quite high for unpolished VPS–W/F82H, indicating that most of D was trapped by the oxide layer, which was produced by the VPS process. The reduction of surface area due to the polishing process also reduces D retention for VPS–W/F82H. These results indicate that controlling the surface chemical states is important for the reduction of tritium retention for future fusion reactors.

99 GENERAL AND MISCELLANEOUS↗

Structural, vibrational and luminescence properties of the (1−x)CaWO{sub 4}−xCdWO{sub 4} system

In the present work, we investigate the structural, microstructural, vibrational and luminescence properties of the system (1−x)CaWO{sub 4}−xCdWO{sub 4} with x ranging between 0 and 1. Polycrystalline samples were elaborated using a coprecipitation technique followed by thermal treatment at 1000 °C. The samples were then characterized using X-ray diffraction, scanning electron microscopy, Raman spectroscopy and luminescence analyses. X-ray diffraction profile analyses using Rietveld method showed that two kinds of solid solutions Ca{sub 1−x}Cd{sub x}WO{sub 4} having scheelite and wolframite structures, with respectively tetragonal and monoclinic crystal cells, were observed, with a biphasic system for compositions x=0.6 and 0.7. The scanning electron microscopy experiments showed a complex evolution of morphologies and crystallite sizes as x increased. The vibration modes of Raman spectra were characteristic of composition-dependent disordered solid solutions with decreasing wavenumbers as x increased. Luminescence experiments were performed under UV-laser light irradiation. The energies of emission bands increased linearly with cadmium composition x. The integrated intensity of luminescence reached a maximum value for the substituted wolframite phase with composition x=0.8. - Graphical abstract: Luminescence on UV excitation (364.5 nm) of (1−x)CaWO{sub 4−x}CdWO{sub 4} system, elaborated from coprecipitation technique at 1000 °C, with 0<x<1. (a) Experimental emission bands of the Ca{sub 1−x}Cd{sub x}WO{sub 4} polycrystalline phases with 0≤x≤0.5. (b) Maximum of luminescence intensity for the composition x=0.8. - Highlights: • Solid solutions Ca{sub 1−x}Cd{sub x}WO{sub 4} are elaborated from coprecipitation technique. • The structures of two types of solid solutions are refined using Rietveld method. • A maximum of luminescence is obtained for an intermediate composition x=0.8.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, microstructure, and electronic band structure properties of nanocrystalline neodymium-doped bismuth titanate ferroelectric films fabricated by the sol–gel method

Graphical abstract: X-ray diffraction indicates that the films are polycrystalline with the pure perovskite phase. Ten Raman active modes and one silicon substrate mode can be observed. The A{sub 1} {sub g}[Bi] at about 59 cm{sup −1} is unchanged whereas the B{sub 1} {sub g} and A{sub 1} {sub g}[Ti] phonon modes shift towards higher frequencies. Photoluminescence shows that the intensities of the two peaks increase with Nd concentration except the Bi{sub 3}NdTi{sub 3}O{sub 12} film, due to the smallest grain size and oxygen vacancy defects. Good optical functions of the BNT films are achieved due to the SE suggesting potential applications in ferroelectric-based optoelectronic devices. - Abstract: Bi{sub 4−x}Nd{sub x}Ti{sub 3}O{sub 12} (BNT) films with different Nd contents (from 0 to 1 with 0.25 intervals) are prepared by the sol–gel process. The Nd substitution effects on the preferred orientation, surface morphology, phonon modes, emission bands, andelectronic band structures of the BNT films are investigated by microscopy, Raman scattering, photoluminescence, and spectroscopic ellipsometry (SE) at room temperature. X-ray diffraction indicates that the films are polycrystalline with the pure perovskite phase. Ten Raman active modes and one silicon substrate mode can be observed. The A{sub 1} {sub g}[Bi] at about 59 cm{sup −1} is unchanged whereas the B{sub 1} {sub g} and A{sub 1} {sub g}[Ti] phonon modes shift towards higher frequencies. Photoluminescence shows that the intensities of the two peaks increase with Nd concentration except the Bi{sub 3}NdTi{sub 3}O{sub 12} film, due to the smallest grain size and oxygen vacancy defects. Good optical functions of the BNT films are achieved due to the SE suggesting potential applications in ferroelectric-based optoelectronic devices.

36 MATERIALS SCIENCE↗

A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications

A novel and simple chemical method based on sol-gel processing was proposed to deposit metastable orthorhombic tin oxide (SnOx) thin films on glass substrates at room temperature. The resultant samples are labeled according to the solvents used: ethanol (SnO-EtOH), isopropanol (SnO-IPA) and methanol (SnO-MeOH). The variations in the structural, morphological and optical properties of the thin films deposited using different solvents were characterized by X-ray diffraction, atomic force microscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, UV-vis spectroscopy and photoluminescence (PL) analysis. The XRD patterns confirm that all the films, irrespective of the solvents used for preparation, were polycrystalline in nature and contained a mixed phases of tin (II) oxide and tin (IV) oxide in a metastable orthorhombic crystal structure. FTIR spectra confirmed the presence of Sn=O and Sn-O in all of the samples. PL spectra showed a violet emission band centered at 380 nm (3.25 eV) for all of the solvents. The UV-vis spectra indicated a maximum absorption band shown at 332 nm and the highest average transmittance around 97% was observed for the SnO-IPA and SnO-MeOH thin film samples. The AFM results show variations in the grain size with solvent. The structural and optical properties of the SnO thin films indicate that this method of fabricating tin oxide is promising and that future work is warranted to analyze the electrical properties of the films in order to determine the viability of these films for various transparent conducting oxide applications.

36 MATERIALS SCIENCE↗