Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Strange and multistrange particle production in Au + Au collisions at {radical}(s{sub NN})=62.4 GeV

We present results on strange and multistrange particle production in Au + Au collisions at {radical}(s{sub NN})=62.4 GeV as measured with the STAR detector at RHIC. Midrapidity transverse momentum spectra and integrated yields of K{sub S}{sup 0}, {Lambda}, {Xi}, and {Omega} and their antiparticles are presented for different centrality classes. The particle yields and ratios follow a smooth energy dependence. Chemical freeze-out parameters, temperature, baryon chemical potential, and strangeness saturation factor obtained from the particle yields are presented. Intermediate transverse momentum (p{sub T}) phenomena are discussed based on the ratio of the measured baryon-to-meson spectra and nuclear modification factor. The centrality dependence of various measurements presented show a similar behavior as seen in Au + Au collisions at {radical}(s{sub NN})=200 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fabrication of model ultrafiltration membranes with uniform, high aspect ratio pores

Here, in this manuscript, we report the facile fabrication of large-area model membranes with highly uniform and high aspect ratio pores with diameters <20 nm. These membranes are useful for fundamental investigations of separation by size exclusion in the ultrafiltration regime, where species to be separated from solution have dimensions of 1–100 nm. Such investigations require membranes with narrow pores and high aspect ratios such that the Hagen–Poiseuille equation is followed, enabling well-known models such as the hindered transport model to be evaluated and other affecting factors to be ignored. We demonstrate that the sub-20 nm pores in the membrane are of sufficiently high aspect ratio such that water flux through the membrane is consistent with the Hagen–Poiseuille equation. The fabrication relies on self-assembling block copolymers to form uniform, densely packed patterns with sub-20 nm resolution, sequential infiltration synthesis to convert the block copolymer in situ into a mask with adequate contrast to etch pores with an aspect ratio >5, and low-resolution photolithography to transfer the pattern over a large area into a silicon nitride membrane. Model membranes with narrow pore-size distribution fabricated in this way provide the means to investigate parameters that impact size-selective ultrafiltration separations such as the relationships between solute or particle size and pore size, their distributions, and rejection profiles, and, therefore, test the validity or limits of separation models.

Chen, Wen↗

ASYMMETRIC DIFFUSION OF MAGNETIC FIELD LINES

Stochasticity of magnetic field lines is important for particle transport properties. Magnetic field lines separate faster than diffusively in turbulent plasma, which is called superdiffusion. We discovered that this superdiffusion is pronouncedly asymmetric, so that the separation of field lines along the magnetic field direction is different from the separation in the opposite direction. While the symmetry of the flow is broken by the so-called imbalance or cross-helicity, the difference between forward and backward diffusion is not directly due to imbalance, but a non-trivial consequence of both imbalance and non-reversibility of turbulence. The asymmetric diffusion perpendicular to the mean magnetic field entails a variety of new physical phenomena, such as the production of parallel particle streaming in the presence of perpendicular particle gradients. Such streaming and associated instabilities could be significant for particle transport in laboratory, space, and astrophysical plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

A study of fission product migration paths in irradiated TRISO particle SiC

Tristructural isotropic (TRISO) coated fuel particles used in high-temperature gas-cooled nuclear reactors (HTGRs) provide key advantages in terms of passive safety and reactor energy efficiencies. TRISO fuel consists of a number of special coating layers surrounding the fissile material in the kernel as shown in Fig. 1. The coating layers consist of a carbon buffer layer, inner pyrolytic carbon (PyC) layer, a silicon carbide (SiC) layer as well as an outer pyrolytic carbon layer. Together the layers act as a pressure vessel and barrier to the release of radioactive fission products into the reactor environment. The cubic 3C-SiC layer of thickness approximately 35 µm, acts as the primary barrier to the migration of metallic fission products out of the particle. The finding, more than three decades years ago, that silver can be released by intact TRISO particles has led to significant research to determine possible transport mechanisms of certain fission products in SiC. Out-of-reactor experiments did not reveal any significant lattice diffusion of silver in SiC1. Many earlier findings alternatively proposed a dominating role of fast diffusion paths such as grain boundaries and dislocations in enhancing fission product migration in SiC. Recently the role of the fission product palladium in enhancing the transport rate of silver in SiC2 was confirmed by transmission electron microscopy (TEM) of neutron-irradiated SiC from a TRISO coated particle from Compact 4-1-1, which was irradiated to an average burnup of 19.38% fissions per initial metal atom (FIMA); a time-averaged, volume-averaged temperature of 1072 °C; a time-averaged peak temperature of 1182 °C; and an average fast fluence of 4.13 x 1021 n/cm2 as part of the US Department of Energy's Advanced Gas Reactor (AGR)-1 experiment3. Although other studies found that Ag was found separately (without Pd) in TRISO coated particles irradiated at 11.4 %, 16.7 and 18.6% FIMA, Pd could have been present at lower than measureable concentrations4. In this study, SiC focussed ion beam (FIB) sections obtained from Compact 4-1-1 from the AGR-1 experiment were analysed in a double Cs-corrected JEOL ARM 200F using atomically resolved scanning transmission electron microscopy (STEM). By using atom resolved STEM in combination with electron energy loss spectroscopy (EELS) and large angle energy dispersive spectroscopy (EDS) a much better understanding of the migration routes and mechanisms of fission products in irradiated polycrystalline 3C-SiC was achieved.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Demixing-stimulated lane formation in binary complex plasma

Recently lane formation and phase separation have been reported for experiments with binary complex plasmas in the PK3-Plus laboratory onboard the International Space Station (ISS). Positive non-additivity of particle interactions is known to stimulate phase separation (demixing), but its effect on lane formation is unknown. In this work, we used Langevin dynamics (LD) simulation to probe the role of non-additivity interactions on lane formation. The competition between laning and demixing leads to thicker lanes. Analysis based on anisotropic scaling indices reveals a crossover from normal laning mode to a demixing-stimulated laning mode. Extensive numerical simulations enabled us to identify a critical value of the non-additivity parameter {Delta} for the crossover.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Continuum model of irradiation-induced spinodal decomposition in the presence of dislocations

A model of phase-separation kinetics in systems exposed to energetic particle irradiation has been extended to include the effects of mobile dislocations. It is shown that when dislocations are allowed to participate in the decomposition reaction, phase separation can occur at temperatures above the coherent spinodal, which is in agreement with several experiments on irradiated alloys. A linear stability analysis of the governing kinetic equations is performed and three regimes of microstructural evolution are identified within the parameter space of damage cascade size vs incident flux: complete phase separation, solid-solution behavior, and compositional patterning. In addition, numerical simulations of the evolving dislocation density and composition fields are performed. The numerical results provide the amplitude and wavelength of the stable patterns that can form under irradiation and elucidate the role of misfit dislocations in reducing the coherency strain due to atomic size mismatch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of prompt charged-particle production in pp collisions at $\sqrt{s}$ = 13 TeV

The differential cross-section of prompt inclusive production of long-lived charged particles in proton-proton collisions is measured using a data sample recorded by the LHCb experiment at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV. The data sample, collected with an unbiased trigger, corresponds to an integrated luminosity of 5.4 nb -1 . The differential cross-section is measured as a function of transverse momentum and pseudorapidity in the ranges $p_T$ ∋ [80, 10 000) MeV/c and η ∋ [2.0, 4.8) and is determined separately for positively and negatively charged particles. The results are compared with predictions from various hadronic-interaction models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear dynamics of charged particles in the magnetotail

An important region of the earth's magnetosphere is the nightside magnetotail, which is believed to play a significant role in energy storage and release associated with substorms. The magnetotail contains a current sheet which separates regions of oppositely directed magnetic field. Particle motion in the collisionless magnetotail has been a long-standing problem. Recent research from the dynamical point of view has yielded considerable new insights into the fundamental properties of orbits and of particle distribution functions. A new framework of understanding magnetospheric plasma properties is emerging. Some novel predictions based directly on nonlinear dynamics have proved to be robust and in apparent good agreement with observation. The earth's magnetotail may serve as a paradigm, one accessible by in situ observation, of a broad class of boundary regions with embedded current sheets. This article reviews the nonlinear dynamics of charged particles in the magnetotail configuration. The emphasis is on the relationships between the dynamics and physical observables. At the end of the introduction, sections containing basic material are indicated.

Chen, James↗

Low-cost and high-performance heat exchangers for CSP

This project aimed to design and manufacture a low-cost and high-performance, particle–to–sCO 2 heat exchanger (HX) for Concentrated Solar Power (CSP) using additive manufacturing (AM). Three enabling technologies will be integrated to achieve the targeted cost and performance. The first technology is the extreme high‐speed laser materials deposition (LMD) AM process known by its German acronym EHLA that was invented at the Fraunhofer Institute for Laser Technology. The EHLA process utilizes a specially designed powder-feeding nozzle that enables a laser to melt the powder particles above the melt pool, in contrast to the conventional LMD process where the powders are melted inside the melt pool. EHLA enables much faster deposition rate than conventional LMD without the need to wait for the powders to melt. The second technology is an innovative double-helical HX geometry that can be easily fabricated using the EHLA process by rotating a rod at a high-speed to take advantage of the high EHLA deposition rate. The double-helical fins separate the hot region (the hot particle side) and the cold region (the sCO 2 side) and provide large heat transfer surface area without a large pressure drop on the sCO 2 side. The particle side will have a larger gap to facilitate the particle flow. The outer rims of the double helixes can be sealed off using the same AM process. After sealing-off, additional double helixes can be built radially on top of the first set to improve HX performance. The HX can be installed vertically for gravity-driven flow of the hot particles if necessary. The third technology is a low-cost high-temperature alumina-forming austenitic (AFA) steel TMA-6350 that has creep and oxidation resistance up to 1100 °C. These technologies together will enable high-performance and low-cost HXs for particle–to–sCO 2 for CSP.

14 SOLAR ENERGY↗

Classical Kepler-Coulomb problem on SO(2, 2) hyperboloid

In the present work, the problem of the motion of the classical particle in the Kepler-Coulomb field in three-dimensional hyperbolic space H{sub 2}{sup 2}: z{sub 2}{sup 0} + z{sub 2}{sup 1} - z{sub 2}{sup 2} - z{sub 2}{sup 3} = R{sup 2} is solved in the framework of Hamilton-Jacobi equation. The requirements for the existence of bounded motion of particle are formulated. The equation of the trajectory of particle is obtained, and it is shown that all the finite trajectories are closed. It is also demonstrated that under the certain values (zero or negative) of the separation constant A the fall of the particle onto the center takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluorescence-Correlation Spectroscopy Study of Molecular Transport within Reversed-Phase Chromatographic Particles Compared to Planar Model Surfaces

Reversed-phase liquid chromatography (RPLC) is a widely used technique for molecular separations. Stationary-phase materials for RPLC generally consist of porous silica-gel particles functionalized with n-alkane ligands. Understanding motions of molecules within the interior of these particles is important for developing efficient chromatographic materials and separations. To characterize these dynamics, time-resolved spectroscopic methods (photobleach recovery, fluorescence correlation, single-molecule imaging) have been adapted to measure molecular diffusion rates, typically at n-alkane-modified planar silica surfaces, which serve as models of chromatographic interfaces. A question arising from these studies is how dynamics of molecules on a planar surface relate to motions of molecules within the interior of a porous chromatographic particle. In this paper, imaging-fluorescence-correlation spectroscopy is used to measure diffusion rates of a fluorescent probe molecule 1,1'-dioctadecyl-3,3,3'3'-tetramethylindocarbocyanine perchlorate (DiI) within authentic RPLC porous silica particles and compared with its diffusion at a planar C18-modified surface. The results show that surface diffusion on the planar C18 substrate is much faster than the diffusion rate of the probe molecule through a chromatographic particle. Surface diffusion within porous particles, however, is governed by molecular trajectories along the tortuous contours of the interior surface of the particles. By accounting for the greater surface area that a molecule must explore to diffuse macroscopic distances through the particle, the molecular-scale diffusion rates on the two surfaces can be compared, and they are virtually identical. Furthermore, these results provide support for the relevance of surface-diffusion measurements made on planar model surfaces to the dynamic behavior of molecules on the internal surfaces of porous chromatographic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of a TRISO MiniFuel irradiation experiment with data-informed uncertainty quantification

An irradiation experiment using tristructural isotropic (TRISO) fuel particles and the miniature fuel (MiniFuel) irradiation vehicle was performed in Oak Ridge National Laboratory’s High Flux Isotope Reactor (HFIR) to support development of the Kairos Power fluoride salt–cooled, high-temperature reactor (KP-FHR). Here, this paper describes modeling predictions of temperatures and fuel burnup for the as-built experiment. An uncertainty quantification (UQ) analysis was performed to determine the effect of TRISO particle volume and position on the temperature predictions at various fuel heat generation rates (HGRs). This UQ study utilized fuel kernel position and volume measurements previously collected using X-ray computed tomography (XCT) techniques and Monte Carlo sampling methods to generate fuel compact cases that were then analyzed using a finite element thermal model. The UQ analysis indicated that uncertainty in calculated temperatures caused by varying TRISO particle arrangement is relatively small, even at high fuel HGR. Final predictions of particle temperatures throughout the irradiation are shown to be relevant to KP-FHR normal and off-normal operating conditions and to previous TRISO irradiation experiments. The combination of XCT with UQ analyses will inform post-irradiation examination (PIE) of the irradiated fuel compacts, and these analyses can be used to develop fuel performance models for coated particle fuel forms. Both PIE of separate-effects irradiation data and enhanced fuel performance modeling support accelerated qualification of TRISO fuels for a broad range of advanced reactor applications. The novel approach demonstrated here of measuring TRISO particle configurations with XCT methods and generating representative fuel compacts for finite element modeling and UQ analysis could be leveraged by the broader particle fuel community in the development of other TRISO fuel experiments in which these variables may have a significant impact on key outcomes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decoupling the Role of Inertia and Gravity on Particle Dispersion

Turbulent gas flows laden with small, dense particles are encountered in a wide number of important applications in both industrial settings and aerodynamics applications. Particle interactions with the underlying turbulent flow are exceedingly complex and, consequently, difficult to accurately model. The difficulty arises primarily due to the fact that response of a particle to the local environment is dictated by turbulence properties in the reference frame moving with the particle (particle-Lagrangian). The particle-Lagrangian reference frame is in turn dependent upon the particle relaxation time (time constant) as well as gravitational drift. The combination of inertial and gravitational effects in this frame complicates our ability to accurately predict particle-laden flows since measurements in the particle-Lagrangian reference frame are difficult to obtain. Therefore, in this work we will examine separately the effects of inertia and gravitational drift on particle dispersion through a combination of physical and numerical experiments. In this study, particle-Lagrangian measurements will be obtained in physical experiments using stereo image velocimetry. Gravitational drift will be varied in the variable-g environments of the NASA DC-9 and in the zero-g environment at the drop tower at NASA-Lewis. Direct numerical simulations will be used to corroborate the measurements from the variable-g experiments. We expect that this work will generate new insight into the underlying physics of particle dispersion and will, in turn, lead to more accurate models of particle transport in turbulent flows.

Rogers, Chris↗

Searches for TeV-scale particles at the LHC using jet shapes

New particles at the TeV scale can decay hadronically with strongly collimated jets, thus the standard reconstruction methods based on invariant masses of well-separated jets can fail. We discuss how to identify such particles in pp collisions at the LHC using simple jet shapes which help to reduce the contribution of QCD-induced events. We focus on a rather generic example X{yields}tt{yields}hadrons, with X being a heavy particle, but the approach is well suited for the reconstruction of other decay channels characterized by a cascade decay of known states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Centrifugal Separation of Antiprotons and Electrons

Centrifugal separation of antiprotons and electrons is observed, the first such demonstration with particles that cannot be laser cooled or optically imaged. The spatial separation takes place during the electron cooling of trapped antiprotons, the only method available to produce cryogenic antiprotons for precision tests of fundamental symmetries and for cold antihydrogen studies. The centrifugal separation suggests a new approach for isolating low energy antiprotons and for producing a controlled mixture of antiprotons and electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient isotope separation by single-photon atomic sorting

We propose a general and scalable approach to isotope separation. The method is based on an irreversible change of the mass-to-magnetic moment ratio of a particular isotope in an atomic beam, followed by a magnetic multipole whose gradients deflect and guide the atoms. The underlying mechanism is a reduction of the entropy of the beam by the information of a single scattered photon for each atom that is separated. We numerically simulate isotope separation for a range of examples, which demonstrate this technique's general applicability to almost the entire periodic table. The practical importance of the proposed method is that large-scale isotope separation should be possible, using ordinary inexpensive magnets and the existing technologies of supersonic beams and lasers.

74 ATOMIC AND MOLECULAR PHYSICS↗

Facile preparation of carbon coated magnetic Fe{sub 3}O{sub 4} particles by a combined reduction/CVD process

Graphical abstract: Magnetic carbon coated Fe{sub 3}O{sub 4} particles are prepared by a one step combined reduction of Fe{sub 2}O{sub 3} together with a CVD process of using methane. Analyses show that the Fe{sub 2}O{sub 3} is reduced by methane to produce mainly Fe{sub 3}O{sub 4} particles coated with amorphous carbon. These materials can be separated into two fractions by simple dispersion in water and can be used as adsorbents, catalyst supports and rapid coagulation systems. Research highlights: {yields} Magnetic Fe{sub 3}O{sub 4} particles coated with a very thin layer of amorphous carbon (4 wt%). {yields} Combined reduction of Fe{sub 2}O{sub 3} with a Chemical Vapor Deposition process using methane. {yields} Nanoparticles with an average size of 100-200 nm. {yields} Uses as adsorbent, catalyst support and rapid coagulation systems. -- Abstract: In this work, we report a simple method for the preparation of magnetic carbon coated Fe{sub 3}O{sub 4} particles by a single step combined reduction of Fe{sub 2}O{sub 3} together with a Chemical Vapor Deposition process using methane. The temperature programmed reaction monitored by Moessbauer, X-ray Diffraction and Raman analyses showed that Fe{sub 2}O{sub 3} is directly reduced by methane at temperatures between 600 and 900 {sup o}C to produce mainly Fe{sub 3}O{sub 4} particles coated with up to 4 wt% of amorphous carbon. These magnetic materials can be separated into two fractions by simple dispersion in water, i.e., a settled material composed of large magnetic particles and a suspended material composed of nanoparticles with an average size of 100-200 nm as revealed by Scanning Electron Microscopy and High-resolution Transmission Electron Microscopy. Different uses for these materials, e.g., adsorbents, catalyst supports, rapid coagulation systems, are proposed.

36 MATERIALS SCIENCE↗

Laboratory investigations of the aerosols in the stratosphere of Titan

Results of experiments in which particles were produced from UV photolysis of C2H2, C2H4, or HCN, separately or in mixtures, modeling Titan's upper atmosphere, are presented. The particles were collected on disks and examined by Scanning Electron Microscopy (SEM). Measurements of particle sizes and shapes and of aggregation were determined from the SEM photographs.

Scattergood, Thomas W.↗