Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PWR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Enrichment Penalty for Molybdenum Cladded Accident Tolerant Fuel

A tri-layered fuel cladding has been proposed as an enhanced accident tolerant fuel (EATF) design. The EATF cladding has an inner layer of zirconium alloy, a layer of molybdenum, and an outer layer of zirconium alloy. Due to its high melting point, high temperature creep resistance, and improved resistance to steam corrosion, the molybdenum layer will better tolerate a loss of active coolant accident than the standard single layer zircaloy cladding currently in use. The addition of the molybdenum layer to the cladding, however, has a deleterious effect on the fuel management due to the high thermal neutron capture cross section of Mo{sup 95}. This negative reactivity effect must be counterpoised by increasing the fuel enrichment in order to maintain a constant cycle length. This work presents a prima facie quantification of the enrichment increase required to maintain cycle length for a standard PWR 3 x 18 month cycle. The quantification of the required enrichment increase is necessary in order for a more thorough financial analysis to be performed for the prospective new fuel design. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Criticality control of a high-performance soluble-boron-free small modular reactor core

The pursuit for a soluble-boron-free (SBF) PWR core has been on-going for more than three decades. It is known that feasibility of such a design is generally higher as the core power (hence core size) is reduced. It is upon this observation that a new approach for an SBF small modular reactor (SMR) core was recently proposed. This paper aims to present criticality control management of the said investigation. All calculations in this study were completed using the 2-step Serpent /Coredax reactor analysis with ENDF/B-7.1 nuclear data library. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Semi-Empirical Correlation for Counter-Current Flow Limitation in a Vertical Pipe

Counter-current two-phase flows may take place in the steam generator of a pressurized water reactor (PWR) during a reflux-cooling mode. Therefore developing reliable correlations of counter-current flow limitation (CCFL) is of great importance in safety analyses. Wallis derived a CCFL correlation, which is expressed in terms of the so-called Wallis parameters, which are the dimensionless gas and liquid volumetric fluxes. Although effects of the fluid properties are not sufficiently accounted for in this correlation, he introduced the inverse liquid viscosity number into it to account for the viscous effect on CCFL . The functional form of the factor for the viscous effect was however empirically determined without physical grounds. Zapke and Kroeger proposed an empirical CCFL correlation by introducing the Ohnesorge number into the original Wallis correlation to account for the effects of the liquid viscosity and surface tension on CCFL. The effects of the fluid properties have been thus added in the original Wallis correlation in an empirical manner. In this study, a semi-empirical correlation for CCFL in a vertical pipe is derived from one-dimensional equations for a steady counter-current annular two-phase flow in a vertical pipe. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spacer Grid and Mixing Vanes Effects Study on Two-phase Flow Using Bubble Tracking Simulations

In Light Water Reactor (LWR) cores, the nuclear fuel rods are arranged together as rod bundles in a triangular or square pattern. The fuel rod bundles are supported by the spacer grids with mixing vanes. An understanding of spacer grid and mixing vanes effect is important since it has a direct impact on the turbulence structure in the flow and the heat removal efficiency from the fuel rod surface. Although a considerable amount of literature has been published on the experimental investigation of spacer grid and mixing vanes effect, the measurements were mainly focused on single-phase flow. The influence of spacer grid and mixing vanes on two-phase flow is yet to be fully understood. Some preliminary research efforts have been invested in nuclear community. For example, Wheeler et al. experimentally studied the effects of spacer grid in air-water two-phase flow. Although mixing vanes are not considered, they presented interesting results of time-averaged two-phase flow quantities at upstream and downstream locations of the spacer grid. Over the past decades, the rapid development of High-Performance Computing (HPC) is allowing for the increasingly larger-scale high-fidelity simulations. Thanks to this favorable historical trend, Direct Numerical Simulation (DNS), integrated with Interface Tracking Methods (ITM), has been emerging as a valuable tool to complement and expand our ability to understand the two-phase flow phenomenon. Meanwhile, in order to make best use of the large-scale two-phase flow simulations, advanced data analysis techniques are being developed, as they enable the extraction of detailed parameters about individual bubble behavior. The level set ITM is utilized in our DNS flow solver, which makes use of a signed distance field. The gas-liquid interface is modeled by the zero level set. The level set method can be readily used to distinguish different phases based on the sign of corresponding level set value (e.g. the sign is positive in the liquid phase while negative in the gas phase.). However, the traditional level set approach is not able to collect calculated values and associate with specific bubbles when multiple (even thousands of) bubbles present in the simulations of two-phase flow. This drawback hinders the collection of useful bubble information, which can give us valuable insights about bubbly flows. For example, how the different local fluid conditions could affect bubble interfacial forces, bubble deformation level, and eventually the bubble distribution throughout the whole domain. A bubble tracking methodology has been developed to address the drawbacks and improve the data collection efficiency of level set based two-phase flow simulations. In the present work, a single Pressurized Water Reactor (PWR) subchannel with reduced size spacer grid and mixing vanes is chosen as the computational domain. The springs and dimples of the spacer grid are not represented for simplicity in the present investigation. The bubble tracking methodology is applied to the simulations of two-phase bubbly flow through spacer grid and mixing vanes region. In the intended simulation, the liquid turbulence will be fully resolved by DNS while the two-phase behaviors are captured by level set ITM. Bubble tracking data are to be processed to investigate the spacer grid and mixing vanes effect on two-phase bubbly flow. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evaluation for Effect of TRACE Spacer Grid Model on RBHT Reflood Tests

Usually, the spacer grid decreases the flow area and then enhances the convective heat transfer due to the flow acceleration and the turbulence increases. Their phenomena is shown in both egg-crate style spacer grids and mixing vane grids. Also, the mixing vane swirls the flow and enhances the convective heat transfer. In this study, the effect of spacer grid model of TRACE was performed on RBHT (Rod Bundle Heat Transfer) reflood tests. The RBHT tests were designed to conduct several separate-effects tests such as single phase steam cooling, low flow boiling and dispersed flow film boiling heat transfer, which is very important during a large break loss of coolant accident (LOCA). This facility has a heated length of 3.66 m (12.0 ft), which is typical of a pressurized water reactor (PWR) fuel assembly. The test section consists of a 7 x 7 rod bundle with 45 heated electrical rods, and seven mixing vane grids. The electrical rods have a diameter of 9.5 mm and are arranged with a 12.6 mm pitch with 45 heater rods and four unheated rods. Tests 1096, 1108, 1170, 1196, 1285 and 1383, which are in the TRACE assessment manual , were selected to evaluate the effect of the spacer grid model of TRACE. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of Coolant Void Condition on Melt Fragmentation using Simulants in Initial Phase of Metal-fueled SFR Severe Accident

Metal fuel has inherent safety characteristics, especially in severe accident conditions. However, the metal-fueled SFR severe accident scenarios need to be categorized since overall severe accident mitigation strategies have not been prepared. In addition, these mitigation strategies should be classified in specific phases. In an initial phase of metal-fueled SFR severe accident scenarios, fuel melting, and cladding failures would occur. After the occurrence of the cladding breach, the molten metal fuel would be ejected into a coolant channel due to fission gas in fuel cavity or rapid evaporation of sodium bond. This is called Ex-pin phenomena. There are few studies considering the Ex-pin phenomena of metal fuel. Related representative studies are transient reactor test facility (TREAT) M series tests. The TREAT M series tests provided fundamental metal fuel performance in transient condition. They informed partial experimental data such as the amount of melt ejected into coolant channel after the cladding failure. However, these experimental data did not examine the melt behavior during the Ex-pin phenomena. In metal-fueled SFR, it is a known fact that the negative reactivity feedback occurs in the initial phase of severe accident. In an unprotected loss-of-flow (ULOF) accident, the void-reactivity feedback may be positive depending on where in the reactor core the sodium voiding occurs. However, molten metal fuel would be better dispersed upward compared to those of an oxide fuel and significant negative reactivity feedback could be induced through such behaviors. Thus, a key safety strategy to mitigate the accident progression at the initial phase of severe accident is to discharge melt upwards out of the core. In this paper, the upward discharge of melt is defined as melt levitation. Such melt levitation could ensure early termination of severe accident. There could be different melting behaviors inside the pin depending on reactor types or the type of fuel. In case of pressurized water reactor (PWR) oxide fuel-water system, the rapid power excursion would initiate melting of fuel at the surface of the pellets. In this paper, the ULOF accident for the metal-fueled SFR is considered as an accident scenario. To induce the melt levitation, the driving force should be clarified. Heo et al. observed a built-up vapor pressure was suggested as one of the driving forces for the upward dispersion of the molten materials. The following factors also have the potential to induce the melt levitation; the pressure induced by fission gas in the cavity or rapid boiling of sodium bond, natural circulation flow of the sodium, the sodium vapor flow generated by the difference between inlet and outlet plenum in the reactor core, the built-up vapor pressure due to the fuel-coolant interaction etc. These factors are balanced each other. They should be examined through the Ex-pin experiments. Before conducting a parametric study for each factor, the general behavior of the molten metal fuel should be investigated in the coolant channel. Since rapid sodium coolant boiling could occur in the initial phase of severe accident scenarios, the molten fuel would be ejected and fragmented in voided channel. Unlike previous studies concerning an un-voided channel, differences in melt behavior in the voided channel are expected. In present study, molten material behavior was evaluated to reveal their characteristics in voided channel. The Ex-pin experiments were performed in both un-voided and voided channel, thus such behavior differences were explicitly observed. In the lab-scale experiments, the un-voided and voided channel were reflected by coolant-filled and air-filled channel, respectively. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Critical Heat Flux Model Improvement in CTF for Natural Circulation Type Reactors

The objective of this study was to enhance the departure from nucleate boiling (DNB) modeling capabilities of the subchannel analysis code CTF. The intent was to include consideration for PWR-type reactors which are characterized by relatively low subchannel mass flux and high inlet subcooling during normal operation. Identifying a CHF model appropriate for these type of conditions is required for an accurate thermal-hydraulics performance analysis. Several CHF models that are available in open literature, including those already implemented in CTF, were studied for their applicability. This includes the CHF models by Westinghouse (W-3), Electric Power Research Institute (EPRI-1), Biasi, Bowring, and Groeneveld. Since the models were developed within a certain validity range of operating conditions (mass flux, equilibrium quality, pressure, hydraulic diameter, and others), these ranges were used as a measure of acceptability. It was found in these considerations that the Groeneveld and Bowring models were the most appropriate. Therefore, the models by Bowring and Groeneveld were selected for implementation in CTF. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Experimental study of the downstream effect of LOCA-generated debris on the pressure drop of full scale fuel assembly

The emergency core cooling system (ECCS) works to cool the reactor core in the event of a postulated loss-of-coolant accident (LOCA). The long-term reactor cooling water of ECCS comes from containment sump. Usually, the containment sump contains one or more screens to prevent the components of the ECCS from debris which could be washed into the sump. Large debris is blocked by the sump screens. However, some of the debris, such as fibrous, chemical precipitates and small particles may be ingested into the ECCS and subsequently into the reactor coolant systems (RCS), which would challenge the long-term core cooling (LTCC) and threaten the reactor core safety. NRC address this concern Generic Letter 2004-02. Westinghouse has evaluated the AP1000 1/4 height fuel assembly head-loss test in response to the issue. AVERA also perform the scaled 1/3 height mock-up fuel assembly test. The debris effect on the pressure drop of half-length mock-up PLUS7 fuel assembly of APR1400 were performed in KHNP. Numerical simulation by RELAP5-3D were performed for the debris-generated core blockage and full core as well as core bypass blockage condition were considered. However, the test in the works mentioned above use the scaled down FA (1/4, 1/3 or 1/2 length of a full FA), and didn't give the relationship between pressure drop and debris batches. The purpose of this study was to extend the debris effect to the full scale PWR fuel assembly, and identified batch by batch effect of debris to head loss of FA. The specific experimental procedure is concluded. The pressure drop test without adding debris is performed at the beginning and then three kinds of debris are added to the test loop step by step to test their effect on the pressure drop of fuel assembly. Two kinds of tests have been carried out, and the quantitative pressure data are obtained and analysis is provided. This work provides reliable and quantitative data for nuclear power plant (NPP) downstream effect analysis and safety analysis program, which is important to for licensing of NPP and further benchmark exercise. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Modeling of Two-Phase Flow around Spacers with Mixing Vanes in Reactor Rod-Bundles

Reactor fuel rod bundles experience complex two-phase flow patterns that are governed by multiple interacting phenomena. Proper understand of the underlying flow hydrodynamics can point to potential hotspots within nuclear reactors. The structural supports, called spacer grids, have mixing vanes fixed to the trailing edges to enhance mixing and swirl within the flow. This is an added phenomenon that makes the flows even more complicated to model. As reactors can experience boiling conditions, it is important to understand how the spacer geometry affects local velocity and phase distributions in these geometries. This work represents a continuation of a study that has been focused on developing, testing, and validation of a consistent multidimensional model of dispersed bubbly flow along PWR coolant channels,. The proposed model has been implemented in the NPHASE-CMFD code the results of computer simulations have been compared to experimental results of Yloenen. One of the objectives of the current study has been to examine the effects of selected recent modeling improvements at RPI in NPHASE-CMFD as a part of the continuing model development and validation efforts. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Economic Module Development for the Fuel Cycle Simulation Tool CLASS

An economical module to calculate the financial aspect of nuclear industry was developed based on CLASS, a library used for performing dynamic fuel cycle simulations. The tool will be introduced and a simple case of a PWR reactor will be presented to validate the module looking forward to evaluate a symbiotic scenario in the full paper involving UOX reactors, MOX reactors for recycling the plutonium and PHWR reactors for recycling the uranium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Irradiation Response of the Ferrite Phase in CF3 Cast Stainless Steel

Extending service of Light Water Reactors (LWRs) to beyond 60 years will demand a high integrity of materials and components in reactors. The accurate evaluation and prediction of materials performance under anticipated operation conditions are of particular importance for ensuring the safe operation of nuclear power plants over their extended lifetime. The duplex structure stainless steels including cast austenitic stainless steels (CASS) and welds of austenitic stainless steels are widely used in LWRs. The CASS alloys are mainly used in LWRs primary pressure boundary and for some limited core structural components. The type 308/309 welds are used for welding the reactor components made of 304 and 316 stainless steels and as a cladding layer on the inner surface of reactor pressure vessel. The core support columns made of CF8 CASS in a B and W design PWR are expected to be exposed to a fluence of between 1x10{sup 21} and 1x10{sup 22} n/cm{sup 2}, E>1.0 MeV, and the austenitic stainless steel welds can potentially receive a fluence up to 5x10{sup 22} n/cm{sup 2}, E>1.0 MeV. In addition to the thermal aging effect, the radiation induced fracture toughness in those duplex structure stainless steel components located in the high neutron fluence regions in LWRs hasn't be fully evaluated. Previous studies showed that the spinodal decomposition in the delta ferrite phase in CASS or type 308/309 welds is the primary embrittlement mechanism, and the G-phase precipitates were also identified but with less impact on the reduction of fracture toughness. It is generally agreed that the irradiation induced fracture toughness decrease in CASS and weld steels saturates after 10 dpa (∼1x10{sup 22} n/cm{sup 2}, E>1.0 MeV). Nevertheless, there are not enough high dose data points to confirm the lower bound in measured fracture toughness as the reported doses are limited to 15 dpa. The work in this paper is to present a more comprehensive study on the microstructural evolution in the ferrite phase in a CF3 CASS, and the results provide a scientific basis for extrapolating the change of fracture toughness to a high dose range.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Statistical Analyses of Post Irradiation Experiments of the BWR Forsmark

Computer codes which are to be used in nuclear safety research need to be validated prior to their application. For depletion codes, this validation can be done using data from post irradiation experiments (PIE). These experiments consist of a radiochemical analysis of small parts of a fuel rod (FR), which has been irradiated in a nuclear power plant as part of a fuel assembly (FA). This analysis allows the deduction of the isotopic composition of nuclides important for the desired application case. In addition the operation history at the sample location needs to be known and reported with the analysis results. In our work, we perform uncertainty and sensitivity analyses of a model based on a sample from the boiling water reactor (BWR) Forsmark-3 in order to deduce the influence of uncertain system parameters on the nuclide composition of the depleted fuel. In a second step we compare the resulting uncertainties of the nuclide densities with the deviation between their calculated and experimental values. The goal is to obtain quantitative uncertainty data which can be accounted for in a validation procedure. We use the Monte Carlo sampling approach, i.e. repeating the model calculation using statistically varied sets of the uncertain input parameters and analyzing the distributions of the result values statistically. BWR depletion calculations are especially demanding due to the increased complexity and heterogeneity compared to pressurized water reactors (PWR): extensively variable enrichments, complex FA geometries, partial length FRs, strong axially varying moderator density and the common use of gadolinium as burnable absorber in some of the FRs. However, the precise and correct calculation of BWR-depletion is extremely important in view of a possible application in burnup credit for BWR FAs. Therein credit is taken for the reduced reactivity of spent fuel due to the depletion of {sup 235}U for transport and intermediate or final storage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Deterministic Selection of Design Extension Condition without Core Melt

The concept of beyond design basis accidents (BDBA) recently has been changed to design extension conditions (DEC). DEC is required to be considered in the design process, and it comprises conditions in events without core melt and conditions in events with core melt. DEC with core melt is a part of severe accident. A systematic and deterministic approach to select DEC without core melt for a pressurized water reactor (PWR) is introduced.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Power Distribution Control Strategy of a Conceptual Soluble Boron Free SMR

In a commercial PWR, the two primary functions of control rods are to provide rapid shutdown and to control power distribution, whereas the initial excess reactivity associated with fuel loading is controlled by the soluble boron in the coolant and burnable absorbers. The required number of total control rods is determined by the shutdown margin of the reactor. The control rod grouping is also required to control power distribution. Therefore, removal of soluble boron requires extra reliance on the control rods to compensate excess reactivity. In a soluble boron free reactor which has highly negative MTC requires an increase in both worth and number of control rod assemblies to ensure adequate shutdown margin. In addition, since control rods are partially inserted into the reactor core, their presence adversely affects the power distribution and thus may make high peaking factors leading to an operating margin reduction. In this paper, the strategy of control rods operation to control excess reactivity and power distribution have been studied. Also, shutdown capability of the control rods was examined. A loading pattern for a Conceptual Soluble Boron Free Small Modular Reactor (CSBF-SMR) has been constructed. Two groups of regulating banks employ Ag-In-Cd to control excess reactivity and power distributions during the cycle operation and 1 group of shutdown bank made of B{sub 4}C were used.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quantification of functional impact classification on the current U.S. nuclear fleet

Currently, nuclear power generates only a small fraction of the world's electricity, though it does have the potential to meet the needs of the world as long as its production can compete with the alternative energy base load producers. In U.S the commercial nuclear fleet comprises of Light Water Reactors (LWRs), consisting of Pressurized Water Reactors (PWRs) and Boiling Water Reactors (BWRs). Many plants experience multiple events each year, which lead to reactor trips or scrams. This subsequently leads to plants being off the grid, which is not an economically favorable situation in the current energy markets. This study helps identify functional impact (FI) event categories for both PWR's and BWR's. Understanding that not all events and their causes can be anticipated, current industry best practices implement lessons learned to provide challenges and issues identification. In turn these are studied to achieve improved operational practices, and design modifications. This leads to overall enhanced resiliency. FI groups are the categories of initiating events (IE). IEs are unplanned events that occur while a nuclear plant is in critical operation, and requires that the plant be shut down to achieve a stable state. When a risk cannot be eliminated, IEs are identified and studied to reduce the risk and contribute to the identification of mitigations, safer designs and operational practices. Breaking IE events into groups' results in the classification of FI groups. A FI group is a risk-significant event category that could impact the ability of a NPP to remove decay heat from the reactor. Inability to remove decay heat from the reactor has the potential to lead to core damage. For an event to be considered a FI, it must be associated with a manual or automatic reactor trip, irrespective of the order of events. In addition, the plant must be at or above the point of adding heat and the event must happen before or shortly after a reactor trip. One or more FIs may be identified in any individual reactor trip sequence. The relationship between FI sequence, and/or frequency per a plant event is outside the scope of this paper. For example, the loss of offsite power (LOOP) can occur from eternal events (i.e. weather, human, wildlife etc.). This results in an event that requires a transfer of power to an emergency source, such as a generator, which produces a reactor trip and then a closure of main steam isolation valves (MSIVS). The FI applicable to this reactor trip sequence would be LOOP and closure of at least one MSIV in each main steam line. The results presented herein are focused on the analysis and evaluation of FI event categories. Only FI categories that can be found in IE studies, Initialing Events Spreadsheet and are recorded in a historical review of Licensee Event Reports (LERs) from 1988 through 2013. The results of this analysis can support plant decisions, design, procedures, and identify weakness.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Diverting steam from a nuclear power plant to thermal storage to increase economic efficiency of electricity production

In 2014, 30% of greenhouse gases that were emitted in the United States came from the production of electricity. These greenhouses gases are causing global warming, an environmental challenge affecting today's climate. Nuclear power plants provide the ability to produce electricity without creating the harmful greenhouse gases. However, in some markets nuclear power is not as economically competitive as other electricity generation methods. To increase the use of nuclear power, minimizing the production of greenhouse gases, nuclear power must become more profitable. A way to accomplish this, is by storing heat during times of low electricity prices to be used to produce electricity when the electricity price is greater. This can be done through the thermal storage of diverted steam from the secondary system of a light water pressurized water reactor (PWR) at times of low electricity prices. Six technologies for heat storage are being investigated: steam accumulators, sensible heat fluid systems, packed-beds, cryogenic air systems, hot rock, and geologic heat storage. There are multiple technologies to store electricity when prices are low to sell electricity when prices are high. These include hydro pumped storage, batteries and many other technologies. A nuclear reactor generates heat. Thus, the preferred storage option is to store heat. Heat storage is also much cheaper than electricity (work) storage; thus, has the potential for a competitive storage system. Many of these storage technologies are currently being installed in solar thermal plants to avoid selling electricity when electricity prices are low.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Activation Calculation for the Dismantling and Decommissioning of a Light Water Reactor Using MCNP{sup TM} with ADVANTG and ORIGEN-S

The boiling water reactor (BWR) Philippsburg 1 (KKP1) and the pressurized water reactor (PWR) Neckarwestheim 1 (GKN I), with a thermal power of 2575 MW{sub th} resp. 2497 MW{sub th}, were shut down and entered directly the post-operational phase which is covered by the operating license held by the nuclear power plant owner. The decommissioning of a nuclear power plant (NPP) which is licensed under chap. 7 of the German Atomic Energy Act, following the post-operational phase requires a comprehensive licensing procedure including in particular radiation protection aspects and possible impacts to the environment. Decommissioning requires a decommissioning license. This will include essential changes in requirements for the systems and components and will mainly lead to the immediate dismantling of the nuclear power plant which is now the only permitted decommissioning strategy in Germany. In this context, neutron activation calculations for the structural components of KKP1 and GKN I have to be carried out to predict occurring activities and to estimate future costs for conditioning and packaging. To avoid an overestimation of the radioactive inventory and to calculate the expenses for decommissioning as accurate as possible, modern state-of-the-art Monte-Carlo-Techniques (MCNP6) combined with automated variance reduction tools (ADAVANTG) are used and are coupled with the activation and decay module ORIGEN-S. This paper presents the calculation procedure and the obtained results with a validation by measured activations and gamma dose rates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Core Reactivity Control for a Soluble Boron Free Small Modular Reactor

Soluble boron has been used in pressurized water reactors (PWRs) to control the core excess reactivity in a uniform and stable way without distorting power distributions. It also enables current commercial PWRs to have high core power density. Despite its outstanding advantages, the soluble boron raises several significant concerns such as soluble boron-induced corrosion of structures, a large amount of liquid waste generation, and a possibility of positive moderator temperature coefficient (MTC) at high boron concentration. These concerns become more serious as the concentration of boron becomes higher. Therefore boron in the primary coolant has been a hindrance to the power uprate and cycle extension operation of PWRs. Currently a government-supported research project is underway to develop technologies for the soluble-boron-free (SBF) operation of a PWR-type small modular reactor (SMR). This paper presents preliminary results of the SBF SMR core reactivity control methods including optimization of burnable absorbers (BA) and control rod design, and development of secondary shutdown system (SSS)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗