Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Optical Properties of Barium Strontium Niobate SBN61 Films

Heteroepitaxial Sr{sub 0.61}Ba{sub 0.39}Nb{sub 2}O{sub 6} films have been formed on MgO(001) substrates by RF deposition in an oxygen atmosphere. The film orientation with respect to the substrate is investigated using X-ray diffraction. The permittivity dispersion parameters in the visible range are determined by measuring optical transmission spectra. The films are found to have a wider band gap and a smaller refractive index as compared with the single-crystal material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanism of Formation of Carbon–Vacancy Structures in Silicon Carbide during Its Growth by Atomic Substitution

The mechanism of formation of carbon-vacancy structures in silicon carbide SiC from silicon vacancies that inevitably form during synthesizing SiC from Si by atomic substitution has been studied. It is shown that it is useful for one of four nearest carbon C atoms to be displaced to the place of a silicon vacancy with the decrease in the total energy by 1.5 eV in the case of polytype 3C and by 0.9–1.4 eV in the case of polytype 4H. In this case, the C atom must overcome the activation barrier of 3.1 eV in the case of polytype 3C and by 2.9–3.2 eV in the case of polytype 4H. This transition is realized during synthesizing SiC due to thermal fluctuations, since the synthesis temperature is T ≈ 1200–1300°C. Thus, the carbon–vacancy structure is a nearly flat cluster of four C atoms and related carbon vacancy with a characteristic diameter of ∼4 Å at a distance of 2.4 Å from it. All the characteristics of this transformation, namely, the energy profile, the transformation pathway, the transient state, its frequency spectrum, the eigenvector corresponding to the only negative eigenfrequency are calculated by the elastic band method. The infrared spectrum (IR) and the permittivity of SiC containing carbon–vacancy structures are considered. The new line at 960 cm{sup –1} detected recently in the IR spectrum of grown by the atomic substitution is unambiguously identified with vibrations of C atoms in carbon–vacancy structures. It is concluded that carbon–vacancy structures stabilize cubic polytype SiC–3C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermooptical and Dielectric Studies of a Calcium-Induced Ferroelectric Phase in a SrTiO{sub 3} Incipient Ferroelectric

We have examined temperature changes of the light refraction, birefringence, dielectric permittivity, and dielectric hysteresis loops in Sr{sub 1–x}Ca{sub x}TiO{sub 3} single crystals with x = 0.014 (SCT-1.4). The dielectric properties of Sr{sub 1–x}Ca{sub x}TiO{sub 3} with x = 0.007 (SCT-0.7) have been studied. We have performed ab initio calculations of equilibrium structures and total energies for three low-temperature phases of SrTiO{sub 3} and CaTiO{sub 3}, based on which we have determined an expected symmetry of the ground state of their solid solution and spontaneous polarization directions in a calcium-induced ferroelectric phase in Sr{sub 1–x}Ca{sub x}TiO{sub 3}. In SCT-1.4, we have separated a spontaneous contribution to the light refraction, which arises due to the spontaneous electrooptical effect caused by the spontaneous polarization and its fluctuations. From the spontaneous contribution to the light refraction, based on a previously developed our phenological approach, we have quantitatively determined for the first time the values and temperature dependences of root-mean-square fluctuations of the order parameter—the polarization P{sub sh} = 〈P{sub fl}{sup 2}〉{sup 1/2}(short-range, local polar order) in the ferroelectric phase. From optical and dielectric measurements in SCT-1.4, the average value of spontaneous polarization P{sub s} (the contribution from the long-range order) has been determined. We have estimated the values of P{sub sh} and P{sub s}, which characterize the short- and long-range orders in the ferroelectric phase of SCT-0.7. Separate determination of the values and temperature dependences of P{sub s} and P{sub sh} (which considerably exceeds the value of P{sub s} in the ordered phase) has allowed us to reveal on a quantitative level new particular features of the formation of the induced polar phase in Sr{sub 1–x}Ca{sub x}TiO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and Magneto-Optical Properties of Multilayer Nanosized [Co/TiO{sub 2}]{sub n} Films

Abstract—The optical and magneto-optical properties of the metal–dielectric multilayer [Co/TiO{sub 2}]{sub n} structures with 2–4-nm-thick layers prepared on a silicon substrate Si(001) by ion-beam deposition have been studied. The complex permittivity of multilayer [Co/TiO{sub 2}]{sub n} structures has been measured by the optical ellipsometry technique in the spectral range of 0.6–5.6 eV and analyzed using the optical reflection matrices for isotropic multilayer dielectric structures taking into account the optical losses and also using the method of anisotropic effective medium. The magneto-optical Kerr effect has been measured by the polarimetric technique in the spectral range of 1.2–4.5 eV in the polar and longitudinal geometries. The magnetic anisotropy type is determined on the base of the field dependences of the magneto-optical Kerr effect. It is found that the nanosized [Co/TiO{sub 2}]{sub n} structures can be considered as artificial optically uniaxial media with a strong magnetic and optical anisotropy at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dielectric Parameters of Elastically Strained Heteroepitaxial SrTiO{sub 3} Films

Three-layer epitaxial SrRuO{sub 3}/SrTiO{sub 3}/SrRuO{sub 3} heterostructures with the 900-nm-thick intermediate layer of strontium titanate have been grown on single-crystal (001)La{sub 0.29}Sr{sub 0.71}Al{sub 0.65}Ta{sub 0.35}O{sub 3} substrates by the laser evaporation method. Plane-parallel film capacitors have been formed on the basis of the grown heterostructures using photolithography and ion etching. Temperature dependences of the dissipation factor have been measured for these capacitors at different bias voltages applied to strontium ruthenate electrodes. Temperature dependences of the permittivity of the intermediate SrTiO{sub 3} layer in the formed capacitor structures are visualized with compensation of the internal electric field and without it. The reasons for the sharp increase in the dielectric loss in the formed film capacitors at temperatures below 50 K are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge State of Metallic Nanoparticles on a Conducting Substrate

The charge state of a disordered system of metallic nanoparticles on a conducting substrate is analyzed. The theoretical model that describes thermostimulated tunnel transitions of electrons between the particles and also the electron transitions between the particles and the substrate due to the difference in the work functions has been built. The model takes into account the interaction of the charges of the nearest particles and also the interaction of the particle charges with the image charges in the substrate. The Monte Carlo computer simulation for this model makes it possible to obtain the distribution pattern of the charge in structures with different nanoparticle density in a one-layer coating on the substrate at various values of the dielectric permittivity of the environment and various values of the difference of the work functions of particles and the substrate. The numerical results for structures with Ni and Pt nanoparticles on a carbon substrate, which are often used as catalysts of chemical processes, are presented as an example.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Chemical Composition of TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} (0 ≤ x ≤ 0.01) Crystals on Their Dielectric Characteristics and the Parameters of Localized States

The frequency dependences of the real (ε') and imaginary (ε'') parts of the complex dielectric permittivity, the dielectric loss tangent (tanδ), and the ac conductivity (σ{sub ac}) in the frequency range f = 5 × 10{sup 4}–3.5 × 10{sup 7} Hz have been studied in the TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} (0 ≤ x ≤ 0.01) crystals synthesized in this work. It is found that, in TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2}, the relaxation dispersions of ε' and ε'' take place. The effect of the erbium concentration (Er) in the TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} crystals on their dielectric coefficients has been studied. At high frequencies, the ac conductivity of the TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} crystals obeys the relationship σ{sub ac} ~ f {sup 0.8}, which is characteristic of the hopping mechanism of the charge transfer over states localized near the Fermi level. The parameters of the states localized in the forbidden band of TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} and the influence of the chemical composition of the crystals on these parameters are estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermostable ferroelectric capacitors based on graded films of barium strontium titanate

The influence of the pressure of working gas during the ion–plasma sputtering on properties of deposited ferroelectric barium strontium titanate coatings has been experimentally studied. Variations in the of pressure of the working gas during deposition allows the component composition of the deposited layer to be changed, which leads to the diffusion of the phase transition and the improvement of temperature stability of properties of ferroelectric film. The gradation of layers has an impact on the temperature of the dielectric permittivity maximum, the shape of the dependence of the capacity on temperature, and the capacitance–voltage characteristics of the capacitor structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetically Controlled Tunneling of a TE Wave through the Ferrite—ε-Negative Layer Structure

We have considered the tunneling of a normally incident electromagnetic wave through a bilayer structure that consists of a ferrite layer and an adjoining layer with a negative permittivity. The ferrite layer is transversely magnetized by an external magnetic field that corresponds to the range of negative values of the effective permeability. It has been shown that the transmission of the structure can be controlled in wide limits by varying the external magnetic field. In particular, nearly perfect tunneling (viz., nonreflective transmission of incident radiation) can be realized.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunneling of Microwave Radiation through Three-Layer Structures Containing Ferrite Layer

Tunneling of microwave radiation through a symmetric three-layer structure in which the central ferrite layer is interfaced with two layers of a material with negative permittivity is considered. Conditions for perfect tunneling (i.e., transmission with zero reflection) are analyzed for normal incidence. It is shown that the transmittance of the structure can be controlled using external magnetic field that provides magnetization of the ferrite layer. A broad transmission band with a width of several gigahertzes in which almost perfect tunneling is implemented can exist in the frequency range corresponding to the negative effective permeability of the ferrite material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of an Electromagnetic Wave with Circular Electron Beam Interaction in a Slow-Wave System of “Ribbed-Metal-Rod” Type

The interaction of an electromagnetic wave and external annular electron beam in a slow-wave system (SWS) of ribbed-metal-rod type was analyzed and expressions for the equivalent parameters of inductance and capacitance of the structure were found. A dispersion equation describing the excitation of axisymmetric electric waves in the SWS was derived in the impedance approximation. The dispersion characteristics and coupling coefficient have been modeled depending on the geometry of the rod and dielectric permittivity of the material filling the grooves in the SWS structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonance Tunneling of Electromagnetic Waves for Enhancing the Efficiency of Bolometric Photodetectors

A method for enhancing the efficiency of bolometric photodetectors is presented. The method utilizes the analogy between the process of tunneling of a flux of quantum particles through a potential barrier and the propagation of electromagnetic waves within a nontransparent medium. The calculation results demonstrate that the fraction of radiation absorbed in a detector at a certain IR frequency may be close to unity if one chooses the right thickness and permittivity of the resonator substrate below a thin metal (superconductor) layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New Aspects of the Fluctuation-Electromagnetic Theory of Friction and Radiative Heat Exchange of Levine–Polevoi–Rytov in a System of Two Parallel Plates

It has been shown that the fundamental results obtained in the works by Levine, Polevoi, and Rytov (1980) and Polevoi (1990) adequately describe the rate of radiative heat exchange and dissipative frictional force in a system of two parallel plates in relative lateral motion. Within the framework of the Levine–Polevoi–Rytov theory, a new expression has been obtained for the force of fluctuation-electromagnetic friction of two plates in the terms of local dielectric permittivities and magnetic permeabilities of the plate materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Toward a More Complete Electrodynamic Theory

Maxwell's equations require a gauge condition for specific solutions. This incompleteness motivates use of a dynamical quantity, {zeta} = -{del} {center_dot} A - {epsilon}{mu} {partial_derivative}{phi}/{partial_derivative}t. Here, A and {phi} are the vector and scalar potentials, with permeability and permittivity, {epsilon} and {mu} respectively. The results are: relativistic covariance; classical wave solutions; elimination of inconsistency between the media-interface matching for {phi} and for Gauss law; independent determination of A and {phi}; prediction of two new waves, one being a charge-fluctuation-driven scalar wave, having energy but not momentum; a second longitudinal-electric wave with energy and momentum; experimental suggestions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast Ferroelectric L-Band Tuner for Superconducting Cavities

Analysis and modeling is presented for a fast microwave tuner to operate at 700 MHz which incorporates ferroelectric elements whose dielectric permittivity can be rapidly altered by application of an external voltage. This tuner could be used to correct unavoidable fluctuations in the resonant frequency of superconducting cavities in accelerator structures, thereby greatly reducing the RF power needed to drive the cavities. A planar test version of the tuner has been tested at low levels of RF power, but at 1300 MHz to minimize the physical size of the test structure. This test version comprises one-third of the final version. The tests show performance in good agreement with simulations, but with losses in the ferroelectric elements that are too large for practical use, and with issues in bonding of ferroelectric elements to the metal walls of the tuner structure.

36 MATERIALS SCIENCE↗

On the detection of crevasses in glacial ice with synthetic-aperture radar.

The intent of this study is to provide an analysis of the scattering from a crevasse in Antarctic ice, utilizing a physics-based model for the scattering process. Of primary interest is a crevasse covered with a snow bridge, which makes the crevasse undetectable in visible-light images. It is demonstrated that a crevasse covered with a snow bridge can be visible in synthetic-aperture-radar (SAR) images. The model of the crevasse and snow bridge incorporates a complex dielectric permittivity model for dry snow and ice that takes into account the density profile of the glacier. The surface structure is based on a fractal model that can produce sastrugi-like features found on the surface of Antarctic glaciers. Simulated phase histories, computed with the Shooting and Bouncing Ray (SBR) method, are processed into SAR images. The viability of the SBR method for predicting scattering from a crevasse covered with a snow bridge is demonstrated. Some suggestions for improving the model are given.

36 MATERIALS SCIENCE↗

Electromagnetic material changes for remote detection and monitoring: a feasibility study: Progress report

A new concept for radiation detection is proposed, allowing a decoupling of the sensing medium and the readout. An electromagnetic material, such as a magnetic ceramic ferrite, is placed near a source to be tracked such as a shipping container. The electromagnetic material changes its properties, in this case its magnetic permeability, as a function of radiation. This change is evident as a change in reflection frequency and magnitude when probed using a microwave/millimeter-wave source. This brief report discusses modeling of radiation interaction of various candidate materials using a radiation detector modeling code Geant4, system design considerations for the remote readout, and some theory of the material interaction physics. The theory of radiation change in doped magnetic insulator ferrites such as yttrium iron garnet (YIG) seems well founded based on literature documentation of the photomagnetic effect. The literature also suggests sensitivity of permittivity to neutrons in some ferroelectrics. Research to date indicates that experimental demonstration of these effects in the context of radiation detection is warranted.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗