Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PELLETING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Effect of sewage sludge content on gas quality and solid residues produced by cogasification in an updraft gasifier

Highlights: Black-Right-Pointing-Pointer Cogasification of sewage sludge with wood pellets in updraft gasifier was analysed. Black-Right-Pointing-Pointer The effects of sewage sludge content on the gasification process were examined. Black-Right-Pointing-Pointer Sewage sludge addition up to 30 wt.% reduces moderately the process performance. Black-Right-Pointing-Pointer At high sewage sludge content slagging and clinker formation occurred. Black-Right-Pointing-Pointer Solid residues produced resulted acceptable at landfills for non-hazardous waste. - Abstract: In the present work, the gasification with air of dehydrated sewage sludge (SS) with 20 wt.% moisture mixed with conventional woody biomass was investigated using a pilot fixed-bed updraft gasifier. Attention was focused on the effect of the SS content on the gasification performance and on the environmental impact of the process. The results showed that it is possible to co-gasify SS with wood pellets (WPs) in updraft fixed-bed gasification installations. However, at high content of sewage sludge the gasification process can become instable because of the very high ash content and low ash fusion temperatures of SS. At an equivalent ratio of 0.25, compared with wood pellets gasification, the addition of sewage sludge led to a reduction of gas yield in favor of an increase of condensate production with consequent cold gas efficiency decrease. Low concentrations of dioxins/furans and PAHs were measured in the gas produced by SS gasification, well below the limiting values for the exhaust gaseous emissions. NH{sub 3}, HCl and HF contents were very low because most of these compounds were retained in the wet scrubber systems. On the other hand, high H{sub 2}S levels were measured due to high sulfur content of SS. Heavy metals supplied with the feedstocks were mostly retained in gasification solid residues. The leachability tests performed according to European regulations showed that metals leachability was within the limits for landfilling inert residues. On the other hand, sulfate and chloride releases were found to comply with the limits for non-hazardous residues.

54 ENVIRONMENTAL SCIENCES↗

An experimental study on thermo-catalytic pyrolysis of plastic waste using a continuous pyrolyser

Highlights: • Thermo-catalytic pyrolysis of plastic waste in a bench scale continuous feed unit. • Utilizing RDC temperature profile to enhance oil product selectivity towards diesel. • Mesoporosity is a critical factor for coke deposition on catalyst. • Pelletised catalysts, not powder catalysts, provided higher selectivity towards diesel. - Abstract: A bench scale, two-stage, thermo-catalytic reactor equipped with a continuous feeding system was used to pyrolyse pure and waste plastics. Experiments using five zeolitic and clay-based catalysts of different forms (pellet and powders) and different plastic feedstocks – virgin HDPE, HDPE w1aste and mixed plastic waste (MPW) were compared to the control experiments – pyrolysis without catalyst. Results indicated that the two pelletized catalysts were the most promising for the conditions employed. Of these two, one with higher acidity and surface area was highly selective for the gasoline fraction (C{sub 5}–C{sub 11}) giving 80% from the total medium distillate conversion using virgin HDPE as feedstock. It also produced the least amount of olefins (17% for virgin HDPE, 4% for HDPE waste and 2% for MPW) and coke (<1% for virgin HDPE, 3% for HDPE waste and 5% for MPW), and the highest aromatics content (22% for virgin HDPE from un-distilled medium distillate, 5% for HDPE and 13% for MPW both from distilled medium distillate). The second pelletized catalyst exhibited high selectivity for the diesel fraction (C{sub 12}–C{sub 25}) giving 63% from the total medium distillate conversion using virgin HDPE as feedstock. The amount of coke deposited on the catalyst surface depended mainly on the mesopore volume, with less coke deposited as the mesopore volume increased. The variation in catalyst selectivity with acidity strength due to Lewis sites on the catalyst surface controls selectivity towards carbon chain length.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

X-ray diffraction characterization of magnetostriction in Terfenol-D

The magnetostrictive response of a Terfenol-D pellet was measured via a laboratory-based X-ray diffractometer. X-ray diffraction patterns were collected from the pellet sample with and without the presence of an applied magnetic field (~30 mT) generated by placing a large magnet under the pellet. A standard reference material, Silicon 640c, was employed as an internal standard. Magnetostriction values of 323 and 227 ppm Δl/l were determined for the (104) and (110) indexed peaks, respectively, assuming a rhombohedral structure for Terfenol-D. A threshold noise level value of ~20 to 30 ppm Δl/l was suggested based on before/after measurements in the absence of the applied field. No clear evidence of domain wall rotation was detected via changes in relative intensities of diffraction peaks in the presence of the applied magnetic field.

Magnetostriction↗

Simultaneous Isotopic Analysis of U, Pu, and Am in Spent Nuclear Fuel by Resonance Ionization Mass Spectrometry

Solid samples of spent nuclear fuel were analyzed for actinide isotopic composition by resonance ionization mass spectrometry. Isotopes of U, Pu, and Am were simultaneously quantified using a new method that removes and/or resolves the isobaric interferences at 238 U/ 238 Pu and 241 Pu/ 241 Am without sample preparation other than cutting and mounting small (~10 μm) samples. Trends in burnup and neutron capture product distributions were correlated with the sampling positions inside the reactor. Overall, the results show the skin effect, in which the core and near-edge regions of a fuel pellet exhibit strong differences in actinide concentrations and isotope distributions due to differences in the neutron energy spectra between the pellet rim and the core. While no elemental concentration measurements were made, the ability to measure the 238 Pu/ 239 Pu ratio in the presence of a 7400× excess of 238 U enabled an estimate of the enhancement in Pu concentration due to the skin effect at the rim of the pellet.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Thermal Evolution of Internal Strain in Doped PbTe

Recent improvements in the efficiency of heat-to-electricity energy conversion in lead chalcogenide thermoelectrics involve reducing the thermal conductivity by incorporating large amounts of internal strain. The extent to which typical lead chalcogenide processing techniques (such as doping, ball milling, and densification) increase internal strain and dislocation density must be quantified to improve materials design. In this study, neutron powder diffraction is leveraged to evaluate the internal strain introduced by ball milling in doped and undoped powders. Doping with Na and/or Eu increases internal strain beyond ball milling alone, with the greatest increase from combining the two dopants. Strain recovery occurs in each powder above 400 K but can be suppressed by co-doping, indicating a strong dopant–dislocation interaction in this system. Therefore, high-temperature processing of PbTe powders should be avoided if high internal strain is desired. Low-temperature densification and/or rapid pressing techniques may be key to maintaining internal strain in the final pressed pellet. The diffraction peak asymmetry and correlated elastic softening measured in pressed PbTe pellets in past studies were not observed in the precursor powders measured here, suggesting that measurements of the Debye temperature on final pressed pellets are required to examine the influence of defect-induced elastic softening on thermal conductivity. This work provides key guidance for defect engineering to maximize internal strain and thermoelectric performance in PbTe thermoelectrics.

36 MATERIALS SCIENCE↗

A First-Principles Density Function Theory Study of Tritium Diffusion in Li 2 ZrO 3 : Application for Producing Tritium

The ceramic material Li 2 ZrO 3 has superior thermo-physical and thermo-chemical properties and is highly compatible with other blanket materials used in nuclear reactors. Like LiAlO 2 , it could be used in the form of an annular pellet in tritium-producing burnable absorber rods (TPBARs) to produce tritium( 3 H) upon thermal neutron irradiation of lithium isotope ( 6 Li). The radiation damaged pellet crystal contains vacancies, defects of its constituent elements, and several other trapping sites which hinder the 3 H diffusion process and releasing behavior. In this study, we investigate the diffusion mechanisms of 3 H and O 3 H species in Li 2 ZrO 3 ceramic pellet in order to understand the effects on diffusion barriers and diffusion coefficients due to the presence of interstitial and substitutional Li defects, hydroxide (O– 3 H) vacancy defect, and of the interactions of 3 H with O-vacancies in the radiation damaged Li 2 ZrO 3 crystal. We consider several possible diffusion pathways of interstitial and substitutional 3 H and its species in a defective supercell and calculate the activation energy barrier profiles. We find that the smallest activation energy barrier is 0.3 eV and corresponding diffusion coefficient at 600 K is 1.93 × 10 –9 m 2 /s for 3 H substitutional diffusion. The smallest 3 H interstitial diffusion barrier and diffusion coefficient are found to be 0.34 eV and 3.25 × 10 –9 m 2 /s. By examining several channels for diffusion, our results show the most likely diffusion mechanism of 3 H migration is occurring along the c-direction by exchange of 3 H within and between different Li sites. Here, our calculated results reveal that the smallest energy barrier for O 3 H diffusion is 0.75 eV which is when O 3 H is diffusing to the O–Li vacancy pair and the corresponding diffusion coefficient is 6.31 × 10 –13 m 2 /s. In terms of 3 H diffusion, the obtained results indicate that the performance of Li 2 ZrO 3 could be better than γ-LiAlO 2 , a widely used ceramic material in TPBAR for producing 3 H.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Overview of the Alaskan Layered Pollution and Chemical Analysis (ALPACA) Field Experiment

The Alaskan Layered Pollution And Chemical Analysis (ALPACA) field experiment was a collaborative study designed to improve understanding of pollution sources and chemical processes during winter (cold climate and low-photochemical activity), to investigate indoor pollution, and to study dispersion of pollution as affected by frequent temperature inversions. A number of the research goals were motivated by questions raised by residents of Fairbanks, Alaska, where the study was held. This paper describes the measurement strategies and the conditions encountered during the January and February 2022 field experiment, and reports early examples of how the measurements addressed research goals, particularly those of interest to the residents. Outdoor air measurements showed high concentrations of particulate matter and pollutant gases including volatile organic carbon species. During pollution events, low winds and extremely stable atmospheric conditions trapped pollution below 73 m, an extremely shallow vertical scale. Tethered-balloon-based measurements intercepted plumes aloft, which were associated with power plant point sources through transport modeling. Because cold climate residents spend much of their time indoors, the study included an indoor air quality component, where measurements were made inside and outside a house to study infiltration and indoor sources. In the absence of indoor activities such as cooking and/or heating with a pellet stove, indoor particulate matter concentrations were lower than outdoors; however, cooking and pellet stove burns often caused higher indoor particulate matter concentrations than outdoors. The mass-normalized particulate matter oxidative potential, a health-relevant property measured here by the reactivity with dithiothreiol, of indoor particles varied by source, with cooking particles having less oxidative potential per mass than pellet stove particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate limitations of lime dissolution into coal ash slag

The rate-limiting mechanisms of lime dissolution from a solid pellet into coal ash slag and synthetic slag was investigated using an experiment involving a rotating cylinder of lime in a liquid slag bath at temperatures of 1450-1650{degree}C. Scanning electron microscopy (SEM) analysis of the slag composition around the lime cylinder was used to determine the nature of the boundary layer surrounding the pellet and the calcium concentration profile. Predictions using shrinking core models of a cylindrical pellet were compared to experimental results, suggesting that diffusion through the slag boundary layer and the change of the phase of lime from solid to liquid in the boundary layer combine to limit the process. These results indicate that a combination of controlling steps: diffusion through the boundary layer and the phase change of lime from solid to liquid, must be considered when predicting lime dissolution rates. 24 refs., 5 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

4D structural changes and pore network model of biomass during pyrolysis

Biochar is an engineered carbon-rich substance used for soil improvement, environmental management, and other diverse applications. To date, the understanding of how biomass affects biochar microstructure has been limited due to the complexity of analysis involved in tracing the changes in the physical structure of biomass as it undergoes thermochemical conversion. In this study, we used synchrotron x-ray micro-tomography to visualize changes in the internal structure of biochar from diverse feedstock (miscanthus straw pellets, wheat straw pellets, oilseed rape straw pellets, and rice husk) during pyrolysis by collecting a sequence of 3D scans at 50 °C intervals during progressive heating from 50 °C to 800 °C. The results show a strong dependence of biochar porosity on feedstock as well as pyrolysis temperature, with observed porosity in the range of 7.41–60.56%. Our results show that the porosity, total surface area, pore volume, and equivalent diameter of the largest pore increases with increasing pyrolysis temperature up to about 550 °C. The most dramatic development of pore structure occurred in the temperature range of 350–450 °C. This understanding is pivotal for optimizing biochar’s properties for specific applications in soil improvement, environmental management, and beyond. By elucidating the nuanced variations in biochar’s physical characteristics across different production temperatures and feedstocks, this research advances the practical application of biochar, offering significant benefits in agricultural, environmental, and engineering contexts.

54 ENVIRONMENTAL SCIENCES↗

Effects of thermal pretreatment and catalyst on biomass gasification efficiency and syngas composition

This work explores the combined effects of thermal pretreatment and using a catalyst in situ on gasification carbon conversion efficiency, as well as product gas and tar content and compositions. To compare the effects of thermal pretreatment, pelletized and ground oak with three different levels of thermal pretreatment were gasified in a fluidized bed reactor. The pretreatments applied to the oak were (1) pelletization, (2) drying at 180 °C in air, and (3) torrefaction at 270 °C in nitrogen. The oak dried at 180 °C produced syngas of similar quality and approximately the same amount of char as untreated oak. Torrefaction at 270 °C resulted in syngas with a higher hydrogen to CO ratio, lower methane, and less than half of the total tar -- all of which are desirable properties in terms of product gas quality. However, the oak torrefied at 270 °C also produced more than two times the amount of char as the untreated, pelletized oak. To determine the effect of catalyst, a series of experiments were conducted using olivine impregnated with nickel and cerium as the fluidized bed material in the gasifier. These tests showed that modified olivine can improve hydrogen production and reduce methane and tar levels in the syngas. The result was observed for both treated and untreated oak; although the effect was more substantial for untreated oak, for which the use of modified olivine reduced tar concentrations in the product gas by 60%, with a larger reduction in heavier tars than lighter tars. Furthermore, this result is important because reduction in heavier tar plays a more important role in benefitting downstream operations.

09 BIOMASS FUELS↗

First principles density functional theory study of tritium species adsorption on Ni(111) surface and diffusion in nickel-sublayer for tritium storage

The nickel-plated zircaloy-4 is used as a tritium ( 3 H) getter in the tritium-producing burnable absorber rods (TPBARs) to capture 3 H produced in the 6 Li-riched annular γ-LiAlO 2 pellet under neutron irradiation. The experimental data and our previous theoretical results showed that the 3 H species produced from the γ-LiAlO 2 pellet were mainly 3 H 2 and 3 H 2 O. These 3 H species diffuse from the surface of the LiAlO 2 pellet across vacuum to the nickel-plated zircaloy-4 getter and then further diffuse into the getter to chemically form metal hydrides. While a number of studies show that oxygen binds strongly as compared to 3 H on the nickel (Ni) layer, the detailed mechanism of 3 H species absorption and diffusion across the Ni plate and Ni/Zr interface are still unclear. By employing density functional theory calculations, here we explored the 3 H 2 and 3 H 2 O species adsorption and dissociation on the Ni(111) surface and diffusion into the Ni sublayer. Our results indicated that the 3 H 2 and 3 H 2 O dissociate on the Ni(111) surface. The NiO x and Ni(O 3 H) x could be formed in the Ni layer due to the higher oxygen (O) diffusion energy barrier and formation of Ni vacancy defects. The oxygen was found to be retained in the Ni layer from diffusing across the Ni–Zr interface. This was revealed by comparing the diffusion barriers for 3 H with O. 3 H was found to have nearly three times smaller diffusion barrier than for O, making 3 H comparatively easier to diffuse through the Ni layer. In conclusion, the obtained results provide guidelines for experimental measurements on 3 H retention behavior in TPBARs and may open further avenues to explore the impurity effects on 3 H diffusion and storage at the Ni/zircaloy interfaces.

Tafen, De Nyago [National Energy Technology Lab. (↗

Pre-ignition laser ablation of nanocomposite energetic materials

Laser ignition of energetic material composites was studied for initiation with heating rates from 9.5 Multiplication-Sign 10{sup 4} to 1.7 Multiplication-Sign 10{sup 7} K/s. This is a unique heating rate regime for laser ignition studies because most studies employ either continuous wave CO{sub 2} lasers to provide thermal ignition or pulsed Nd:YAG lasers to provide shock ignition. In this study, aluminum (Al) and molybdenum trioxide (MoO{sub 3}) nanoparticle powders were pressed into consolidated pellets and ignited using a Nd:YAG laser (1064 nm wavelength) with varied pulse energy. Results show reduced ignition delay times corresponding to laser powers at the ablation threshold for the sample. Heating rate and absorption coefficient were determined from an axisymmetric heat transfer model. The model estimates absorption coefficients from 0.1 to 0.15 for consolidated pellets of Al + MoO{sub 3} at 1064 nm wavelength. Ablation resulted from fracturing caused by a rapid increase in thermal stress and slowed ignition of the pellet.

36 MATERIALS SCIENCE↗

Structural defects induced by Fe-ion implantation in TiO{sub 2}

X-ray photoelectron spectroscopy and resonant x-ray emission spectroscopy measurements of pellet and thin film forms of TiO{sub 2} with implanted Fe ions are presented and discussed. The findings indicate that Fe-implantation in a TiO{sub 2} pellet sample induces heterovalent cation substitution (Fe{sup 2+} → Ti{sup 4+}) beneath the surface region. But in thin film samples, the clustering of Fe atoms is primarily detected. In addition to this, significant amounts of secondary phases of Fe{sup 3+} are detected on the surface of all doped samples due to oxygen exposure. These experimental findings are compared with density functional theory calculations of formation energies for different configurations of structural defects in the implanted TiO{sub 2}:Fe system. According to our calculations, the clustering of Fe-atoms in TiO{sub 2}:Fe thin films can be attributed to the formation of combined substitutional and interstitial defects. Further, the differences due to Fe doping in pellet and thin film samples can ultimately be attributed to different surface to volume ratios.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of Krypton-85 Legacy Waste Forms: Part II

During a removal of legacy materials from one hot cell at the Idaho National Laboratory in 2010, five metal capsules and some loose zeolite material were identified as krypton (Kr) immobilization test specimens produced in the late 1970s under the Airborne Waste Management Program (AWMP). This AWMP research and development effort examined the encapsulation of 85Kr within a collapsed zeolite structure for use as a potential waste form for long-term storage. The recovered capsules appeared to have been placed to the side and remained untouched after the AWMP was halted in the mid-1980s. These reclaimed capsules and loose material presented a unique opportunity to study a potential 85 Kr waste form after three half-lives had elapsed. The first phase of this study included two parts: The first was to assess the physical condition of the capsule walls, and the second was to examine the Kr-containing material within the capsules. The first part of this study was previously reported and noted that substantial corrosion was observed throughout each capsule wall of the two previously breached capsules that were examined. One of these capsules had been hot isostatic pressed (HIPed) and one was not HIPed. The second part of the study examined the materials contained in the two previously breached capsules. There appears to be a relatively uniform distribution of Kr and rubidium throughout the pellets examined. The chemical composition of the pellets appears to be consistent with 5A molecular sieves. The material contained within the HIPed capsules showed ~1 at. % lead (Pb). The origin of the Pb is currently indeterminate. X-ray diffraction analysis shows a significant shift from the 5A structure, most likely due to the Kr encapsulation/sintering process that occurred when the samples were made. Calculations based on the energy dispersive spectrometry elemental analysis show a residual Kr level within the pellets that is within a factor of 2 of the reported Kr capacities for this type of processed material. This provides a clear indication that a significant fraction of the Kr initially encapsulated in the material remained within the waste form even following a significant breach of the capsule wall. As a result, it would appear that this Kr immobilization method, even in non-HIPed form, is very promising as a waste form for long-term storage. The successful analysis of these two breached capsules forms a solid basis for the future analysis of the remaining unbreached capsules, which offers the opportunity to provide an even more complete understanding of the long-term Kr retention performance of this promising waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fabrication of UN-Mo CERMET Nuclear Fuel Using Advanced Manufacturing Techniques

Ceramic-metallic nuclear fuels are a candidate fuel for nuclear thermal propulsion systems due to their high heat transport properties, which are necessary in very high-temperature environments. The conventional fabrication of uranium nitride–molybdenum fuel has been thoroughly studied in the past, but modern manufacturing techniques have presented a unique opportunity for further development within this field. This work demonstrates the use of advanced manufacturing techniques to produce nuclear fuel pellets composed of uranium nitride microspheres encased in a molybdenum matrix. Binder jetting is used to print molybdenum disks that are filled with uranium nitride microspheres and afterward sintered using spark plasma sintering. Two fuel pellets were fabricated to demonstrate the methodology and to provide a baseline analysis of the effects of temperature and pressure processing conditions. Characterization of the sintered fuel pellets includes detailed microstructural analysis and thermal conductivity measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of High-Temperature Compatibility of Select Oxides with Yttrium Hydride for Micro and Space Reactor Applications

Yttrium hydride is a promising material for a high-temperature neutron moderator in advanced micro and space reactors due to its high hydrogen density and relative thermal stability compared to other metal hydrides. However, yttrium hydride desorbs hydrogen rapidly at temperatures above 800°C, which is below the operational temperature range of some reactor designs. A hydrogen barrier coating of oxide on the hydride surface may inhibit hydrogen loss at 800°C and beyond, but the high-temperature compatibility between yttrium hydride and many oxides is currently unknown. The high-temperature compatibility of Al 2 O 3 , MgO, and Y 2 O 3 with YH 1.92 was examined by subjecting mixed oxide–hydride pellets to a 1200°C heat treatment then using a combination of diffractometry, microscopy, and spectroscopy to determine changes in the pellet composition as a result. Yttrium scavenged oxygen from both Al 2 O 3 and MgO to form Y 2 O 3 , resulting in significant loss of YH 1.92 . Yttrium reacted with reduced aluminum to form YAl 2 and several other compounds. Reduced magnesium volatilized above 1091°C and vacated the pellet. Only Y 2 O 3 did not appreciably react with YH 1.92 . Of the three oxides tested, only Y 2 O 3 was compatible with YH 1.92 at 1200°C based on the experimental criteria.

compatibility↗

Time-dependent runaway electron simulations: Ampere–Faraday equations implemented in CQL3D

The runaway electron (RE) distributions driven by a large toroidal electric field induced by the drop in the temperature profile due to disruption or pellets are comprehensively simulated by the 3D Fokker–Planck (FP) solver CQL3D (Harvey and McCoy 1992 Proc. of IAEA TCM ), recently coupled to the Ampere–Faraday (AF) equations. The evolution of the toroidal current in a plasma occurs on a resistive time scale, τ res = 4 πa 2 /( c 2 η ), which is typically of the order of seconds in present tokamaks. Here, a and η are respectively plasma radius or radial extent of a current density perturbation, and Ohmic resistivity. From the Faraday EM equation, the toroidal electric field is proportional to the time derivative of the poloidal magnetic field, which, from the Ampere equation, is proportional to the toroidal current. Thus, the toroidal electric field rapidly increases due to an abrupt temperature drop decrease in conductivity, to prevent change in the toroidal current faster than τ res . This is a example of Lenz's law. For example, in simulations with KPRAD (Whyte et al 2003 J. Nucl. Mater . 313–6 1239) of neon pellet injection into a DIII-D shot, T e drops from 2 keV to 10 eV in 0.1 ms and Z eff increases 1–4, giving that the electric field increases 3500&#x00d7; to 0.8 V cm -1 . As described in Harvey et al (2000 PoP 7 4590), this places much of the tail electron distribution beyond the Dreicer runaway velocity, giving so-called 'hot-tail runaways' which for a time are the dominant source of runaways, more so than the knockon source. In this prior calculation, performed for a single flux surface, the toroidal current density is held constant, on the basis that τ res is large. Most of the initial current can be converted to runaway current, which is then dangerous, particularly for ITER. A more comprehensive A–F model recently implemented in CQL3D, taking into account the time-development of the full-plasma-width toroidal electric field on time-scales of order τ res applies an iterative technique for the toroidal field previously developed for a different application (Kupfer et al 1996 PoP 3 3644), maintaining the implicit-in-time evolution of CQL3D. The degree of runaway current formation is reduced in AF augmented CQL3D, but the basic mechanism of 'hot-tail runaways' remains a dominant contribution to the REs at early times after the T e drop in these simulations. On the other hand, a NIMROD (Sovinec et al 2004 J. Comput. Phys. 195 355 ) simulation of shattered-pellet shutdown of DIII-D plasma (Kim 2018 APS/DPP Meeting), gives a slower thermal quench; when the plasma profiles and electric field are coupled one-way to CQL3D, the 'hot-tail' REs are much less, and growth of RE is dominated by the knockon process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗