Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Advanced Multi-Component Defect Cluster Oxide Doped Zirconia-Yttria Thermal Barrier Coatings

The advantages of using ceramic thermal barrier coatings in gas turbine engine hot sections include increased fuel efficiency and improved engine reliability. However, current thermal barrier coatings will not have the low thermal conductivity and necessary sintering resistance under higher operating temperatures and thermal gradients required by future advanced ultra-efficient and low-emission aircraft engines. In this paper, a novel oxide defect cluster design approach is described for achieving low thermal conductivity and excellent thermal stability of the thermal barrier coating systems. This approach utilizes multi-component rare earth and other metal cluster oxide dopants that are incorporated in the zirconia-yttria based systems, thus significantly reducing coating thermal conductivity and sintering resistance by effectively promoting the formation of thermodynamically stable, essentially immobile defect clusters and/or nanoscale phases. The performance of selected plasma-sprayed cluster oxide thermal barrier coating systems has been evaluated. The advanced multi-component thermal barrier coating systems were found to have significantly lower initial and long-term thermal conductivities, and better high temperature stability. The effect of oxide cluster dopants on coating thermal conductivity, sintering resistance, oxide grain growth behavior and durability will be discussed.

Zhu, Dongming↗

Comparing Experiment and Computation of Hypersonic Laminar Boundary Layers with Isolated Roughness

Streamwise velocity profile behavior in a hypersonic laminar boundary layer in the presence of an isolated roughness element is presented for an edge Mach number of 8.2. Two different roughness element types are considered: a 2-mm tall, 4-mm diameter cylinder, and a 2-mm radius hemisphere. Measurements of the streamwise velocity behavior using nitric oxide (NO) planar laser-induced fluorescence (PLIF) molecular tagging velocimetry (MTV) have been performed on a 20-degree wedge model. The top surface of this model acts as a flat-plate and is oriented at 5 degrees with respect to the freestream flow. Computations using direct numerical simulation (DNS) of these flows have been performed and are compared to the measured velocity profiles. Particular attention is given to the characteristics of velocity profiles immediately upstream and downstream of the roughness elements. In these regions, the streamwise flow can experience strong deceleration or acceleration. An analysis in which experimentally measured MTV profile displacements are compared with DNS particle displacements is performed to determine if the assumption of constant velocity over the duration of the MTV measurement is valid. This assumption is typically made when reporting MTV-measured velocity profiles, and may result in significant errors when comparing MTV measurements to computations in regions with strong deceleration or acceleration. The DNS computations with the cylindrical roughness element presented in this paper were performed with and without air injection from a rectangular slot upstream of the cylinder. This was done to determine the extent to which gas seeding in the MTV measurements perturbs the boundary layer flowfield.

Bathel, Brett F.↗

Solar FTIR Measurements of NOx Vertical Distributions – Part 2: Experiment-Based Scaling Factors Describing the Daytime Variation in Stratospheric NOx

Long-term experimental stratospheric NO2 and NO partial columns measured by means of solar Fourier-transform infrared (FTIR) spectrometry at Zugspitze (47.42° N, 10.98° E; 2964 m a.s.l.), Germany, were used to create a set of experiment-based monthly scaling factors (SFexp). The underlying data set is published in a companion paper (Nürnberg et al., 2024) and comprises over 25 years of measurements depicting the daytime variability of stratospheric NO2 and NO partial columns with respect to local solar time (LST). In accordance with simulation-based scaling factors recently published by Strode et al. (2022), we created SFexp normalized to SZA =72° for NO2 and NO for every month of the year as a function of solar zenith angle (SZA). Apart from a boundary value problem at minimum SZA values originating from averaging over different times of the month, the obtained scaling factors SFexp(NO2) and SFexp(NO) as a function of SZA represent the daytime behavior already shown in model simulations and experiments in the literature very well. This shows a well-pronounced increase in the NO2 and NO stratospheric partial column with the time of the day and a flattening of this increase after noon. In addition to the discussion of SFexp, we validate the simulation-based scaling factors SFsim(NO2) (Strode et al., 2022) and present simulation-based scaling factors for NO SFsim(NO). The simulation-based scaling factors show excellent agreement with the experiment-based ones; i.e., for NO2 and NO the mean value of the modulus between the experiment and simulation over all SZAs and months is only 0.02 %. We show that recently used model simulations can describe the real behavior of nitrogen oxide (NOx) variability in the stratosphere very well. Furthermore, we conclude that ground-based FTIR measurements can be used for validation of the output of photochemistry models and for creating experiment-based data sets describing the daytime stratospheric NOx variability as a function of SZA. This is a contribution to improved satellite validation and a better understanding of stratospheric photochemistry.

FTIR, nitrogen oxides, diurnal variability↗

Interface-Induced Polarization and Inhibition of Ferroelectricity in Epitaxial SrTiO3=Si

We use SrTiO{sub 3}/Si as a model system to elucidate the effect of the interface on ferroelectric behavior in epitaxial oxide films on silicon. Using both first-principles computations and synchrotron x-ray diffraction measurements, we show that structurally imposed boundary conditions at the interface stabilize a fixed (pinned) polarization in the film but inhibit ferroelectric switching. We demonstrate that the interface chemistry responsible for these phenomena is general to epitaxial silicon-oxide interfaces, impacting on the design of silicon-based functional oxide devices.

43 PARTICLE ACCELERATORS↗

A Validation Study of Pin Heat Transfer for MOX Fuel Based on the IFA-597 Experiments

Abstract The IFA-597 (Integrated Fuel Assessment) experiments from the International Fuel Performance Experiments (IFPE) database were designed to study the thermal behavior of mixed oxide (MOX) fuel and the effects of an annulus on fission gas release in light-water-reactor fuel. An evaluation of nuclear fuel pin heat transfer in the FRAPCON-3.4 and Exnihilo codes for MOX fuel systems was performed, with a focus on the first 20 time steps ( 6 GWd/MT(iHM)) for explicit comparison between the codes. In addition, sensitivity studies were performed to evaluate the effect of the radial power shape and approximations to the geometry to account for the thermocouple hole, dish, and chamfer. The analysis demonstrated relative agreement for both solid (rod 1) and annular (rod 2) fuel in the experiment, demonstrating the accuracy of the codes and their underlying material models for MOX fuel, while also revealing a small energy loss artifact in how gap conductance is currently handled in Exnihilo for chamfered fuel pellets. The within-pellet power shape was shown to significantly impact the predicted centerline temperatures. This has provided an initial benchmarking of the pin heat transfer capability of Exnihilo for MOX fuel with respect to a well-validated nuclear fuel performance code.

Phillippe, Aaron M↗

High Temperature Oxidation Lifetime Modelling of thin-walled components

High temperature material solutions for future power generation applications require longer component lifetimes at higher temperatures to improve durability and efficiency. From a research and development point of view, the lifetimes are too long for experimental verification. Thus, accurate lifetime models are needed. Examples are provided where modeling is being applied to lifetime prediction of thin-walled NiCr wrought alloy components. Specific laboratory experiments have been conducted for alloy X at 900°-950°C in dry air and air with water vapor with cycle times from 1 to 500 h. Along with microstructure characterization, comparisons are made between experiment and model predictions. The eventual goal is to predict both oxidation and mechanical behavior.

Pillai, Rishi↗

Insights into the phase stability window, phase transformation behavior, and anisotropic thermal expansion of rhombohedral bismuth oxide

Rhombohedral bismuth oxide has emerged as a promising SOFC electrolyte material, particularly at low-to-intermediate temperatures. The stability window of this phase was explored using a co-doped system, using yttrium and lanthanum or aluminum, over 7.5–25 % total dopant content and 0.907–1.154 Å weighted average dopant cationic radius. The phase transformation behavior of rhombohedral-rich phase mixtures was also investigated in situ from 360 to 656 °C to assess the effects of minor impurity phases and thermal evolution pathways. Our results reveal that low-dopant, rhombohedral-rich compositions exhibit poor structural stability upon heating. Anisotropic thermal expansion behavior was observed over 450–656 °C, serving as a sensitive indicator of sequential phase changes, including the rhombohedral β2-to-β1 transition (∼450 °C), monoclinic phase formation, and delayed or incomplete formation of the cubic phase (∼ 550 °C). These multiple unfavorable phase transitions compromise the mechanical robustness required for SOFC operation. This study underscores the need for compositional tuning to balance ionic conductivity with thermal phase stability in rhombohedral Bi 2 O 3 -based systems.

36 MATERIALS SCIENCE↗

Anomalous magnetic behavior in nanocomposite materials of reduced graphene oxide-Ni/NiFe{sub 2}O{sub 4}

Magnetic Reduced Graphene Oxide-Nickel/NiFe{sub 2}O{sub 4} (RGO-Ni/NF) nanocomposite has been synthesized by one pot solvothermal method. Respective phase formations and their purities in the composite are confirmed by High Resolution Transmission Electron Microscope and X Ray Diffraction, respectively. For the RGO-Ni/NF composite material finite-size effects lead to the anomalous magnetic behavior, which is corroborated in temperature and field dependent magnetization curves. Here, we are reporting the behavior of higher magnetization values for Zero Field Cooled condition to that of Field Cooled for the RGO-Ni/NF nanocomposite. Also, the observed negative and positive moments in Hysteresis loops at relatively smaller applied fields (100 Oe and 200 Oe) are explained on the basis of surface spin disorder.

36 MATERIALS SCIENCE↗

Sintering behavior of lanthanide-containing glass-ceramic sealants for solid oxide fuel cells

This article reports on the influence of different lanthanides (La, Nd, Gd and Yb) on sintering behavior of alkaline-earth aluminosilicate glass-ceramics sealants for their application in solid oxide fuel cells (SOFC). All the glasses have been prepared by melt-quench technique. The in situ follow up of sintering behavior of glass powders has been done by high temperature - environmental scanning electron microscope (HT-ESEM) and hot-stage microscope (HSM) while the crystalline phase evolution and assemblage has been analyzed by x-ray diffraction (XRD) and scanning electron microscopy (SEM). All the glass compositions exhibit a glass-in-glass phase separation followed by two stage sintering resulting in well sintered glass powder compacts after heat treatment at 850 C for 1 h. Diopside (CaMgSi{sub 2}O{sub 6}) based phases constituted the major crystalline part in glass-ceramics followed by some minor phases. The increase in lanthanide content in glasses suppressed their tendency towards devitrification, thus, resulting in glass-ceramics with high amount of residual glassy phase (50-96 wt.%) which is expected to facilitate their self-healing behavior during SOFC operation. The electrical conductivity of the investigated glass-ceramics varied between (1.19 and 7.33) x 10{sup -7} S cm{sup -1} (750-800 C), and depended on the ionic field strength of lanthanide cations. Further experimentation with respect to the long term thermal and chemical stability of residual glassy phase under SOFC operation conditions along with high temperature viscosity measurements will be required in order to elucidate the potential of these glass-ceramics as self-healing sealants.

30 DIRECT ENERGY CONVERSION↗

Antimony redox processes in the environment: A critical review of associated oxidants and reductants

The environmental behavior of antimony (Sb) has recently received greater attention due to the increasing global use of Sb in a range of industrial applications. Although present at trace levels in most natural systems, elevated Sb concentrations in aquatic and terrestrial environments may result from anthropogenic activities. The mobility and toxicity of Sb largely depend on its speciation, which is dependent to a large extent on its oxidation state. To a certain extent, our understanding of the environmental behavior of Sb has been informed by studies of the environmental behavior of arsenic (As), as Sb and As have somewhat similar chemical properties. However, recently it has become evident that the speciation of Sb and As, especially in the context of redox reactions, may be fundamentally different. Therefore, it is crucial to study the biogeochemical processes impacting Sb redox transformations to understand the behavior of Sb in natural and engineered environments. Currently, there is a growing body of literature involving the speciation, mobility, toxicity, and remediation of Sb, and several reviews on these general topics are available; however, a comprehensive review focused on Sb environmental redox chemistry is lacking. Herein, we provide a review of research conducted within the past two decades examining the redox chemistry of Sb in aquatic and terrestrial environments and identifies knowledge gaps that need to be addressed to develop a better understanding of Sb biogeochemistry for improved management of Sb in natural and engineered systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hysteresis-free high rate reactive sputtering of niobium oxide, tantalum oxide, and aluminum oxide

This work reports on experimental studies of reactive sputtering from targets consisting of a metal and its oxide. The composition of the targets varied from pure metal to pure oxide of Al, Ta, and Nb. This combines features from both the metal target and oxide target in reactive sputtering. If a certain relation between the metal and oxide parts is chosen, it may be possible to obtain a high deposition rate, due to the metal part, and a hysteresis-free process, due to the oxide part. The aim of this work is to quantify the achievable boost in oxide deposition rate from a hysteresis-free process by using a target consisting of segments of a metal and its oxide. Such an increase has been previously demonstrated for Ti using a homogeneous substoichiometric target. The achievable gain in deposition rate depends on transformation mechanisms from oxide to suboxides due to preferential sputtering of oxygen. Such mechanisms are different for different materials and the achievable gain is therefore material dependent. For the investigated materials, the authors have demonstrated oxide deposition rates that are 1.5–10 times higher than what is possible from metal targets in compound mode. However, although the principle is demonstrated for oxides of Al, Ta, and Nb, a similar behavior is expected for most oxides.

36 MATERIALS SCIENCE↗

Effects of Disodium Phosphate Concentration (Na{sub 2}HPO{sub 4}·2H{sub 2}O) on Microstructure and Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coatings on 2024 Al Alloy

Since the electrolyte composition plays a pivotal role in the microstructure and corrosion behavior of plasma electrolytic oxidation (PEO) coatings, the effects of disodium phosphate (Na{sub 2}HPO{sub 4}·2H{sub 2}O) concentration on the microstructure and corrosion resistance of PEO coatings fabricated on 2024 Al alloy were studied in this investigation. Accordingly, electrolyte with four different concentrations of phosphate ion (5, 10, 15 and 20 g/L) was used. All PEO processes were conducted at constant current density of 15 A/dm{sup 2} for 15 min. The surface and cross-sectional morphologies of the coatings indicated that the coating formed in the electrolyte with 10 g/L Na{sub 2}HPO{sub 4}·2H{sub 2}O (with 9.14 µm thickness) had the most compact and uniform structure with the lowest and smallest micropores. Furthermore, studying the corrosion behavior of samples in 3.5 wt.% NaCl solutions by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests revealed that the sample coated in the electrolyte with 10 g/L Na{sub 2}HPO{sub 4}·2H{sub 2}O had the highest corrosion potential, the lowest corrosion current density and, accordingly, the best corrosion resistance. The corrosion resistance of this coating was 4.574 × 10{sup 5} Ω cm{sup 2}, which could increase the corrosion resistance of uncoated 2024 Al alloy substrate 48 times. The x-ray diffraction pattern of this coating proved that the coating was composed of α-Al{sub 2}O{sub 3} and γ-Al{sub 2}O{sub 3} phases.

36 MATERIALS SCIENCE↗

Improvements to Modeling Capabilities of ATF Concepts in the BISON Fuel Performance Code

Research into accident tolerant materials for the fuel and cladding in Light Water Reactors has been at the forefront of the nuclear fuel research community since the events that occurred at the Fukushima Daiichi nuclear power plant in March 2011. Accident tolerant materials are defined as those that provide significantly increased response time in the event of an accident while providing similar or improved performance as the conventional UO{sub 2}/zirconium-based cladding fuel rods during normal operation. In particular, qualitative attributes for materials with enhanced accident tolerance include improved reaction (e.g., oxidation) kinetics with steam, resulting in lower hydrogen (or other combustible gases) generation rate, while maintaining acceptable thermo-mechanical properties, fuel-clad interactions, and fission-product behavior. Through it's Office of Nuclear Energy, the United States Department of Energy (U.S. DOE) has accelerated research in this area through the Fuel Cycle Research and Development (FCRD) Advanced Fuels Campaign (AFC). The goal of the AFC Accident Tolerant Fuel (ATF) program is to guide selection of promising concepts for insertion into a commercial reactor as part of a lead test rod or assembly in 2022. Given the aggressive development schedule, it is impossible to perform a comprehensive set of experiments to provide material characterization data. Therefore, the AFC is utilizing computational analysis tools in an effort to understand the proposed accident tolerant materials. The two materials of interest in this work are iron-chromium-aluminum (FeCrAl) cladding and U{sub 3}Si{sub 2}. From a fuel performance standpoint, the correlations available to describe the behavior of these two materials is limited. Therefore, as additional experimental data becomes available and correlations are updated, the fuel performance models must be updated as well to assure that the material models reflect the latest experimental findings. In this paper we demonstrate the importance of utilizing the latest state-of-the-art models for fuel performance simulations by comparing the change in the updated thermal conductivity model for U{sub 3}Si{sub 2} fuel and oxidation model for FeCrAl cladding alloys using the BISON fuel performance code under normal operating conditions. The results indicate that the latest thermal conductivity model for U{sub 3}Si{sub 2} results in fuel centerline temperatures that are on average approximately 3% higher than the previous model. For the oxidation behavior of FeCrAl alloys the new model predicts observable but small oxide thickness (6 μm) compared to the previous model which predicted essentially zero oxide scale formation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Surface Finish on High-Temperature Oxidation of Steels in CO 2 , Supercritical CO 2 , and Air

Current and future power systems require steels resistant to high-temperature oxidation in CO 2 -rich environments. The introduction of structural defects by various surface treatments can profoundly affect the oxidation/corrosion behavior of steels in many environments. This effect is largely unexplored for steels exposed to high-temperature CO 2 , which is the focus of this work. We prepared Grade 22, Grade 91, 347H, and 310S steels with three different surface finishes, ranging from little to substantial surface damage, and exposed the steels to 1 bar CO 2 , 200 bar supercritical CO 2 , and laboratory air at 550 °C for up to 1500 h. Surface finish had little impact on the oxidation behavior of low-Cr (2 wt%) Grade 22 and high-Cr (25 wt%) 310S steels. In contrast, intermediate-Cr steels Grade 91 (8 wt%) and 347H (17 wt%) generally showed improved oxidation and carburization resistance with increasing extent of surface damage, which was attributed to the delay or prevention of the onset of Fe-rich oxide nodule growth. Comparison between exposure environments suggests that this effect is more complex for CO 2 compared to air and that it is additionally affected by CO 2 pressure. In conclusion, the results suggest that surface treatments should be considered as one approach to achieve improved corrosion resistance in high-temperature CO 2 , particularly for steels containing Cr levels near the transition that is required to form and maintain a protective Cr-rich oxide scale.

36 MATERIALS SCIENCE↗

Structural Stabilization of P2-type Sodium Iron Manganese Oxides by Electrochemically Inactive Mg Substitution: Insights of Redox Behavior and Voltage Decay

Layered P2-type Na 0.8 Mn 0.5 Fe 0.5 O 2 cathode material is a promising candidate for next-generation sodium-ion batteries due to the economical and environmentally benign characteristics of Mn and Fe. The poor cycling stability of the material, however, is still a problem that must be solved. To address the problem, here, electrochemically inactive Mg 2+ was introduced into the structure by substituting some of the Fe ions. It was shown that Mg substitution led to a smoother voltage profile with improved cycling performance and rate capability. These observations were attributed to the suppressed structural changes during electrochemical processes. Detailed redox mechanisms, associated local structural changes, and phase transitions were investigated by X-ray absorption spectroscopy and X-ray diffraction. From the detailed analysis of electrochemical behaviors, it was also identified how the redox reactions and structural disordering occurred in the high-and low-voltage regions and how Mg substitution stabilized the structure.

25 ENERGY STORAGE↗

Passivation of a Corrosion Resistant High Entropy Alloy in Non-oxidizing Sulfate Solutions

The passivation behavior of a novel high entropy alloy (HEA) of composition 38Ni-21Cr-20Fe-13Ru-6Mo-2W at.% (33Ni-16Cr-17Fe-19Ru-9Mo-6W wt.%) was investigated in sulfate solutions of various pH levels. The HEA was compared to a commercially available Ni-Cr-Mo-W-Fe alloy, C-22. Experiments were conducted using in-situ electrochemical and ex-situ surface-sensitive methods to probe the growth and dissolution of the passive layer. The HEA exhibited excellent corrosion resistance in highly acidic and highly alkaline solutions, maintaining passivity through a broad range of potentials below the Cr transpassivity range. Extremely rapid and efficient oxide formation and lower quasi-steady passive current densities were observed during oxide growth in the passive range compared to commercial alloy C-22. Ex-situ characterization of the passive film by atom probe tomography and X-ray photoelectron spectroscopy provided insight into the oxide composition, thickness, and elemental valence states of potentiostatically-grown and air-formed oxides. All elements in the alloy were oxidized following potentiostatic oxide growth. Instead of distinct stoichiometric and phase-distinct oxides, a disordered solid solution oxide was observed with significant enrichment in Cr and Ru with the latter depending sensitively on potential, as well as depletion of Fe and Ni. Enrichment of Cr was modeled with a modified surface enrichment model. The oxide thickness was estimated to be 3-4 nm thick. The connection between the enrichment of Cr in the passive layer, Mo and W presence, and excellent passivity is discussed.

corrosion, High entropy alloys, XPS, atom probe to↗

In Situ Studies of Surface Mobility on Noble Metal Model Catalysts Using STM and XPS at Ambient Pressure

High Pressure Scanning Tunneling Microscopy (HP-STM) and Ambient Pressure X-ray Photoelectron Spectroscopy were used to study the structural properties and catalytic behavior of noble metal surfaces at high pressure. HP-STM was used to study the structural rearrangement of the top most atomic surface layer of the metal surfaces in response to changes in gas pressure and reactive conditions. AP-XPS was applied to single crystal and nanoparticle systems to monitor changes in the chemical composition of the surface layer in response to changing gas conditions. STM studies on the Pt(100) crystal face showed the lifting of the Pt(100)-hex surface reconstruction in the presence of CO, H 2 , and Benzene. The gas adsorption and subsequent charge transfer relieves the surface strain caused by the low coordination number of the (100) surface atoms allowing the formation of a (1 x 1) surface structure commensurate with the bulk terminated crystal structure. The surface phase change causes a transformation of the surface layer from hexagonal packing geometry to a four-fold symmetric surface which is rich in atomic defects. Lifting the hex reconstruction at room temperature resulted in a surface structure decorated with 2-3 nm Pt adatom islands with a high density of step edge sites. Annealing the surface at a modest temperature (150 C) in the presence of a high pressure of CO or H 2 increased the surface diffusion of the Pt atoms causing the adatom islands to aggregate reducing the surface concentration of low coordination defect sites. Ethylene hydrogenation was studied on the Pt(100) surface using HP-STM. At low pressure, the lifting of the hex reconstruction was observed in the STM images. Increasing the ethylene pressure to 1 Torr, was found to regenerate the hexagonally symmetric reconstructed phase. At room temperature ethylene undergoes a structural rearrangement to form ethylidyne. Ethylidyne preferentially binds at the three-fold hollow sites, which are present on the Pt(100) hex reconstructed phase, but not the (100)-(1x1) surface. The increase in ethylene pressure caused the adsorbate interactions to dominate the crystal morphology and imposed a surface layer structure that matched the ethylidyne binding geometry. The STM results also showed that the surface was reversibly deformed during imaging due to increases in Pt mobility at high pressure. The size dependence on the activity and surface chemistry of Rh nanoparticles was studied using AP-XPS. The activity was found to increase with particle size. The XPS spectra show that in reaction conditions the particle surface has an oxide layer which is chemically distinct from the surface structure formed by heating in oxygen alone. This surface oxide which is stabilized in the catalytically active CO oxidation conditions was found to be more prevalent on the smaller nanoparticles. The reaction-induced surface segregation behavior of bimetallic noble metal nanoparticles was observed with APXPS. Monodisperse 15 nm RhPd and PdPt nanoparticles were synthesized with well controlled Rh/Pd and Pd/Pt compositions. In-situ XPS studies showed that at 300 C in the presence of an oxidizing environment (100 mTorr NO or O 2 ) the surface concentration of the more easily oxidized element (Rh in RhPd and Pd in PdPt) was increased. Switching the gas environment to more reducing conditions (100 mTorr NO and 100 mTorr CO) caused the surface enrichment of the element with the lowest surface energy in its metallic state. Using in-situ characterization, the redox chemistry and the surface composition of bimetallic nanoparticle samples were monitored in reactive conditions. The particle surfaces were shown to reversibly restructure in response to the gas environment at high temperature. The oxidation behavior of the Pt(110) surface was studied using surface sensitive in-situ characterization by APXPS and STM. In the presence of 500 mTorr O 2 and temperatures between 25 and 200 °C, subsurface oxygen was detected in the surface layer. STM images show that these conditions were found to cause a roughened surface decorated with 1 nm islands. The formation of this surface oxide is a high pressure phenomenon and was not detected in 50 mTorr O 2 . After forming the surface oxide at high pressure, its chemical activity was measured through the reaction with CO at low pressure while continuously monitoring the oxygen species with XPS. The subsurface oxygen was removed by CO oxidation at a comparable rate to the chemisorbed oxygen at 2 °C. Repeating the experiment at -3 °C reduced the reaction rate, but not the relative activity of the two chemical species suggesting that neither species is significantly more active for the CO oxidation reaction. These studies use molecular level surface characterization in the presence of gases to show the structural changes induced by gas adsorption at high pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗