Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Measurement of the lidar cross sections of cube corner arrays for laser ranging of satellites

The satellite coordinate system necessary to describe the location and orientation of each cube corner in the array is discussed. The method of optical testing is described along with the gain function, and computational methods for deriving the gain function and experimental values for it. The velocity aberration is derived as a function of satellite orbit, a complete method for cross section evaluation is described, and finally the radar equation is described.

Minott, P. O.↗
NASA NTRS1975

Interstellar clouds containing optically thin H2

The theory of Black and Delgarno that the relative populations of the excited rotational levels of H2 can be understood in terms of cascading following absorption in the Lyman and Werner bands is employed to infer the gas densities and radiation fields within diffuse interstellar clouds containing H2 that is optically thin in those bands. The procedure is described for computing the populations of the different rotation levels, the relative distribution among the different rotation levels of newly formed H2 is determined on the basis of five simplified models, and the rate of H2 formation is estimated. The results are applied to delta Ori, two components of iota Ori, the second components of rho Leo and zeta Ori, tau Sco, gamma Vel, and zeta Pup. The inferred parameters are summarized for each cloud.

Jura, M.↗
NASA NTRS1979

Autodissociating Rydberg states of positronium hydride

Consequences of the nonrelativistic Coulomb Hamiltonian with a fixed proton are considered for positronium hydride (PsH). An optical-potential method and certain simplifying assumptions are used to compute the lowest s-wave resonance parameters on the basis of the /e(+)H(-)/ configuration. Resonance parameters corresponding to a Ps scattering energy of 4.0190 eV and a width of 0.0303 eV are obtained. These results are shown to be in very close agreement with those of previous studies.

Drachman, R. J.↗
NASA NTRS1979

Polarization and scattering characteristics in the atmospheres of earth, Venus, and Jupiter

Our understanding of atmospheric scattering phenomena has increased through the combined developments of new electro-optical instrumentation, theoretical solutions for complex model atmospheres, and large computers enabling computation of such solutions. Earth satellites permit external, planetwide observations of our atmosphere, while spacecraft permit detailed measurements of the scattering by other planetary atmospheres. Some recent results are: elucidation of the effects of ozone absorption and high-altitude aerosol scattering on twilight colors and polarization; identification of a cloudbow on Venus and consequent deduction of the cloud particle shape, size distribution, and refractive index; and, the interpretation of Rayleigh scattering on Jupiter in terms of cloud-top topography.

Coffeen, D. L.↗
NASA NTRS1980

A design study for an advanced ocean color scanner system

Along with a colorimetric data analysis scheme, the instrumental parameters which need to be optimized in future spaceborne ocean color scanner systems are outlined. With regard to assessing atmospheric effects from ocean colorimetry, attention is given to computing size parameters of the aerosols in the atmosphere, total optical depth measurement, and the aerosol optical thickness. It is suggested that sensors based on the use of linear array technology will meet hardware objectives.

Kim, H. H.↗
NASA NTRS1982

Distorted reflector antenna performance prediction technique

The application of a 3-D curve-fit technique to the electromagnetic analysis of reflector antennas is presented. the reflector antennas are described by the coordinates of an irregular distribution of measured points on the reflector surface. The reflector antenna analysis method used to calculate radiation patterns is geometric-optics with aperture-integration since an efficient and accurate computer code was readily available for modification.

Bailey, M. C.↗
NASA NTRS1983

Capacity and cutoff rate of (M+1)-ary decision rules for noisy M-ary optical PPM channel

The channel capacity C and the cutoff rate R sub o of two (M + 1)-ary decision rules for noisy M slots/symbol optical pulse position modulation (PPM) with ideal photon counting are computed and compared. Also the values of the optimum thresholds needed to minimize the signal requirements are given. With a minor increase in hardware complexity, the symbol by symbol threshold decision rule is shown to be superior to the slot by slot threshold detection and decision rule in two aspects: first, it saves more than 0.5 dB in signal energy for the very noisy cases of more than one noise photon per slot (for low noise cases it also saves signal energy, but a negligibly small amount). Second, it is more robust to variations in the noise level.

Lee, P. J.↗
NASA NTRS1983

Electrostatically figured membrane reflectors: An overview

A schematic diagram of the electrostatically figured membrane reflector (EFMR) is presented in Figure 1. Here, active reflector figure control is exercised via electrostatic stresses which operate between the reflector and a second surface called the -command surface. The command surface is located a short distance behind the reflector and is pulled firmly into an approximate paraboloid by a network of guy wires or comparable structure. This same surface supports insulated conducting segments which are individually addressable by dedicated control voltages. The control voltages are, in turn, collectively biased with respect to the reflector. The reflector, tensioned by a rigid rim at the perimeter, is distended toward the command surface by the bias. The resulting command surface potential distribution, and hence the electrostatic stress distribution acting on the reflector, is continuously and rapidly refined via the control voltages so as to produce and maintain a precise parabolic reflector figure. Optical reflector figure measurements provide the data necessary for computer-supervised figure control. Finally, in order to prevent command surface discharging by photons and charged particles, the command surface is completely enclosed by a conducting shroud of which the reflector serves as the front side. Guy wires to the back-side shroud can be used to figure the command surface. The complete shroud is not pictured in Figure 1.

J H Lang↗
NASA NTRS1982

Mars: Definition and characterization of global surface units with emphasis on composition

Viking 2 approach maps of red and violet normal albedo are used to define units of similar optical properties for a large area of the Martian surface. Computer processing of these data reveals clusters of albedo values relating to specific, contiguous regions of the planet, with some unit boundaries being of a gradational nature while others are more discrete. A study of the albedo properties of analog materials measured in the laboratory, and of telescopic spectrophotometry of Mars, indicates that both hydroxylated and hematitic oxidized materials exist on the surface. The most probable surface expression of global dust and/or high albedo soils is in the classical bright region, Arabia. Most low albedo features in the region studied have red and violet albedos that are consistent with a dark substrate, such as basalt, coated by, or mixed with, a fine grained alteration product.

Mccord, T. B.↗
NASA NTRS1985

A 3-component laser-Doppler velocimeter data acquisition and reduction system

A laser doppler velocimeter capable of measuring all three components of velocity simultaneously in low-speed flows is described. All the mean velocities, Reynolds stresses, and higher-order products can be evaluated. The approach followed is to split one of the two colors used in a 2-D system, thus creating a third set of beams which is then focused in the flow from an off-axis direction. The third velocity component is computed from the known geometry of the system. The laser optical hardware and the data acquisition electronics are described in detail. In addition, full operating procedures and listings of the software (written in BASIC and ASSEMBLY languages) are also included. Some typical measurements obtained with this system in a vortex/mixing layer interaction are presented and compared directly to those obtained with a cross-wire system.

Rodman, L. C.↗
NASA NTRS1987

Flexible spacecraft simulator

Verification of control algorithms for flexible spacecraft can be done only through simulation and test; these are necessary to understand control/structure interaction (C/SI) sufficiently to design robust controllers for future spacecraft. The objective persued is to develop a low-cost facility which simulates the fundamental problem of C/SI; and to provide accessibility for designs so that experience can be gained in applying various multivariable control design methods to an actual structure. A test facility is being constructed with test elements that provide 3 rigid body and 6 flexible modes, all in the horizontal plane, with frequencies below 2.5 Hz. The control force actuator are on/off air jets with sensing by optical displacement sensors. Loop closure is provided by a digital computer with control algorithms designed using the IAC and MATRIX-X.

Source record↗
NASA NTRS1987

Space ten-meter telescope (STMT) - Structural and thermal feasibility study of the primary mirror

The structural and thermal behavior of a ten-meter primary mirror for a space optical/near-IR telescope in geosynchronous orbit is studied. The glass-type lightweighted mirror is monolithic, of the double arch type, and is supported at only three points. The computer programs SSPTA (thermal), NASTRAN (finite element), and ACCOS V (optical) are used in sequence to determine the temperature, deformation, and optical performance of the mirror. A mirror temperature of 130 K or less appears to be obtainable by purely passive means. With a fused silica or standard Zerodur blank, thermally-induced deformation is unacceptable and cannot be fully corrected by an active secondary mirror over the desired field. Either active thermal control or a blank of lower thermal expansion coefficient would be required.

Bely, Pierre Y.↗
NASA NTRS1988

Convolution-controlled rotation and scale invariance in optical correlation

A method is presented for evoking a controlled, continuously-variable degree of rotation- and scale-invariance in optical correlation; the method is suitable for off-line computation of filters, though not for real-time computation. While a closed-form solution for the blur kernels has thus far evaded solution, a digital approximation method has been presented. A simulated correlation run with real, frame-grabbed imagery has indicated the method's desired performance. These Gaussian blur kernels can be replaced with box-car kernels or other blur kernels suitable for the given correlation-task.

Juday, Richard D.↗
NASA NTRS1991

Characterization Of Electrical Response Of Photodetector

Fourier analysis is basis of method of characterizing electrical frequency or time response of photodetector. In method, detector stimulated by optical input signal, intensity modulated with square wave or other repetitive waveform of known frequency spectrum, and output of detector recorded. Electro-optical transfer function, which characterizes frequency response of detector, then computed as ratio between discrete Fourier transforms of output and input waveforms.

Hagopian, John G.↗
NASA NTRS1992

A study of atmospheric optical scattering parameters at 1.5 and 2 micron region for solid state Doppler lidar applications

The increasing interest in the development of an eye-safe, solid state, Doppler lidar for avionic applications has created the need for a quantitative evaluation of atmospheric effects on performance. Theoretical calculations were completed for optical scattering parameters to be compared with the field measurements. Computer codes were developed for the required calculations and designed to be interactive and user friendly in order to support comparison with experimental results and, thus, provide the basis for evaluation of eye-safe Doppler lidar over a wide range of atmospheric conditions and geographical locations. A holmium Doppler lidar operating at 2.09 microns was constructed for atmospheric backscattering, attenuation, and wind velocity measurements. Theoretical calculations and field studies were performed for backscatter coefficients. The selected wavelengths correspond to Er:glass, Tm:YAG, and Tm,Ho:YAG solid state lasers that are suitable for use in an eye-safe Doppler lidar system.

Margalit, Eli↗
NASA NTRS1992

National Space Science Data Center data archive and distribution service (NDADS) automated retrieval mail system user's guide

The National Space Science Data Center (NSSDC) has developed an automated data retrieval request service utilizing our Data Archive and Distribution Service (NDADS) computer system. NDADS currently has selected project data written to optical disk platters with the disks residing in a robotic 'jukebox' near-line environment. This allows for rapid and automated access to the data with no staff intervention required. There are also automated help information and user services available that can be accessed. The request system permits an average-size data request to be completed within minutes of the request being sent to NSSDC. A mail message, in the format described in this document, retrieves the data and can send it to a remote site. Also listed in this document are the data currently available.

Perry, Charleen M.↗
NASA NTRS1992

Estimation of the absolute position of mobile systems by an optoelectronic processor

A method that determine the absolute position of a mobile system with a hybrid optoelectronic processor has been developed. Position estimates are based on an analysis of circular landmarks that are detected by a TV camera attached to the mobile system. The difference between the known shape of the landmark and its image provides the information needed to determine the absolute position of the mobile system. For robust operation, the parameters of the landmark image are extracted at high speeds using an optical processor that performs an optical Hough transform. The coordinates of the mobile system are computed from these parameters in a digital co-processor using fast algorithms. Different sources of position estimation errors have also been analyzed, and consequent algorithms to improve the navigation performance of the mobile system have been developed and evaluated by both computer simulation and experiments.

Feng, Liqiang↗
NASA NTRS1996

Practice Oriented Master's in Optics

This award provides support for the development and initial implementation of an interdisciplinary Master's Program with a concentration in Optics and Photonics Technology. This program is a collaboration between the University of Alabama in Huntsville, Alabama A and M University, Northwest Shoals Community College, the NASA Marshall Space Flight Center, the U.S. Army Missile Command, Oak Ridge National Laboratory, the National Institute for Standards and Technology, Advanced Optical Systems Inc., Dynetics, Inc., Hughes Danbury Optical Systems, Inc., Nichols Research Corp., SCI Inc., and Speedring Inc. These organizations have been participating fully in the design, development and implementation of the program. This program is directed at both traditional students as well as government and defense workers who desire specialty education in practical optics and optical systems design and manufacturing. It is intended to produce highly trained graduates who can solve practical problems, and includes an on-site practicum at a manufacturing location. The broad curriculum of this program emphasizes the fundamentals of optics, optical systems manufacturing and testing, and the principles of design and manufacturing-to-cost for commercial optical products. The degrees offered are the MS in Physics and the MSE in Electrical Engineering with concentration in Optics and Photonics Technology through the Physics and Electrical and Computer Engineering departments of UAH with support from and in consultation with the Steering Committee composed of representatives from each of the participating organizations plus a student representative.

Dimmock, John O.↗