SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Oak Ridge National Laboratory (ORNL) research team in this project has focused on developing methods for improving overdose prevention by addressing three unresolved issues, divided into two groups, that could impact interventions: Understanding events with bad outcomes, and understanding events with better outcomes.
Post-irradiation examination (PIE) oxidation testing is being performed at Oak Ridge National Laboratory (ORNL) on fuel particles from the second Advanced Gas Reactor (AGR) irradiation experiment (AGR-2). Tristructural isotropic (TRISO)-coated particles containing mixed uranium carbide and uranium oxide (UCO) fuel kernels were taken from AGR-2 Compact 5-4-2 and heated in the Furnace for Irradiated TRISO Testing (FITT) under varying oxidizing conditions. Details on Compact 5-4-2 PIE can be found in a previous report (Hunn et al. 2018).
This report describes a confirmatory calculation for a proposed consolidated interim storage facility (CISF) to support the US Nuclear Regulatory Commission’s review of the license application submitted by the Interim Storage Partners. The scope of this report is limited to an assessment of the annual dose from direct radiation associated with Phase 1 of the Waste Control Specialists (WCS) CISF and the determination of the minimum controlled area boundary based on the 10 CFR 72.104 limit of 25 mrem annual dose to the whole body. The confirmatory dose rate calculations used the source term and shielding calculation capabilities of the SCALE 6.2.3 computer code system. The calculation method employed in the confirmatory calculations uses a detailed Monte Carlo radiation transport simulation from source to dose rate. This method differs from the two-step method used in the safety analysis report (SAR), which requires determination of the photon and neutron energy and angular distributions on the cask external surface and then the use of this surface source in a new radiation transport calculation to determine dose rate as a function of distance from the storage facility. A simulation was made using the complete site geometry (all casks present) but with only one cask containing source, and a total of 467 independent calculations were performed to obtain the dose rate maps produced by each storage cask. Basic input data and assumptions used in the SAR (e.g., cask design parameters and design basis assembly characteristics) were used in this confirmatory calculation for consistency with the SAR. Local atmospheric conditions for skyshine calculations were simulated using US standard atmosphere data, which describe average air temperature, pressure, and density as a function of altitude. The determined minimum required distances from the WCS Phase 1 CISF to a contour defined by the 25 mrem annual dose limit were approximately 623 m (0.387 miles) in the N-NE direction, 594 m (0.369 miles) in the SSW direction, and 533 m (0.331 miles) in the E-SE direction and the W-NW direction. The annual dose results of the confirmatory calculation are in relatively good agreement with the annual dose values presented in the WCS SAR. The annual dose produced by the Phase 1 CISF at the nearest site boundary, 0.75 miles away from the CISF, was estimated by this study to be approximately 6.02E-02 ± 2.0E-04 mrem, which is significantly smaller than the 25 mrem annual dose limit provided in 10 CFR 72.104. The SAR annual dose rate value for the nearest site boundary was 7.52E-2 mrem, which included 7.73E-03 mrem due to postulated leakage of the FO-, FC-, and FF-canisters. A comparison with the dose rate values reported in the SAR for 16 detector locations, D1 through D16, on the protected area boundary is also included in this report. This comparison shows that the SAR determined higher annual dose values for detectors D1 through D14 by 12% to 45% and lower annual dose values for detectors D15 and D16 by 18% and 8%, respectively, as compared with this ORNL confirmatory calculation. Sensitivity studies have been performed to support a comprehensive review of the application. In these studies, the effects on dose rate of the modeled air volume, density, and humidity were analyzed. The sensitivity calculations showed that the air volume used in the Monte Carlo simulations was adequate and that a larger air volume would not further increase the dose rate due to skyshine contributions. The sensitivity analysis showed that simulation of local atmospheric conditions is important for the accuracy of dose rate estimates at large distances from the facility. Air humidity was demonstrated to have negligible effects on dose rate values for the simulated local atmospheric conditions.
In this report, the performance of the algebraic multigrid solver used as a preconditioner for conjugate gradient is investigated on 2 nodes of Spock, an early access system at ORNL with 4 MI-100 GPUs and a 64-core Rome CPU per node. We compare GPU and CPU performance for three different diffusion problems using increasing problem sizes.
The Lustre file system has become a preferred storage resource for systems on the Top500 list, and it is often the file system of choice for small- to medium-sized HPC systems that require parallel shared access to data. Several resources exist to help users deploy and configure Lustre, but the same cannot be said for resources that explain the inner workings of the Lustre source code. A previous ORNL technical report entitled "Understanding Lustre Filesystem Internals" (ORNL/TM-2009/117) provided an excellent summary of Lustre subsystem operations. However, that report is over a decade old and is based on Lustre version 1.6. Since that report was published, Lustre has evolved significantly. Several subsystems underwent significant code changes and many new features have been added to the file system, bringing the current Lustre version up to 2.15.This report aims to document and explain the internal workings of the latest version of the Lustre file system. It will provide more complete and up-to-date information than the previous technical report and should serve as a foundational document for anyone interested in Lustre software development. Key data structures will be described along with the APIs used for interaction among the various Lustre subsystems. Although the Lustre software is constantly being developed, the details in this document should remain relevant for the forseeable future.
Since 2017, Oak Ridge National Laboratory (ORNL) has been developing a passive fast-neutron emission tomography capability. The goal of this development is the ability to quantify the neutron source strength of individual fuel pins (rods) in spent nuclear fuel assemblies. Such a system could be used to measure the burnup of each fuel pin in a spent fuel assembly to take burnup credit when loading dry storage casks or to count individual fuel pins in spent fuel assemblies for safeguards purposes. At present, a laboratory prototype imager has been built and initial imaging measurements performed. The purpose of this prototype is to demonstrate imaging capability sufficient to resolve individual fuel pins in spent fuel assemblies, and in initial measurements, neutron sources separated by a spacing of 1.27 cm (similar to the spacing between fuel pins in commercial pressurized water reactor 17×17 nuclear fuel assemblies) have been resolved. This report documents the as-built imager, first measurements performed with it, and tomographic reconstructions performed using the measured data.
The 100 Mo/ 98 Mo recycle process developed by Argonne National Laboratory in collaboration with Oak Ridge National Laboratory (ORNL) and supported by the U.S. Department of Energy (DOE) National Nuclear Security Agency’s (NNSA’s) Office of Material Management & Minimization (M3) is vital to sustaining the economic production of 99 Mo. The high-yield molybdenum solution extraction (MOEX) process recovers enriched Mo by acidifying spent generator solutions, extracting Mo using tri-n-butyl phosphate (TBP), and stripping Mo into ammonium hydroxide, where it is later converted to solid (NH 4 ) 6 M 07 O 24 (ammonium heptamolybdate or AHM) by crystallization. It is important to produce the AHM product with consistent particle size and morphology before its thermal treatment and reduction to Mo metal in a furnace. AHM particles that are too small (< 50 µm) result in Mo metal powder that is much too fine to properly fabricate into targets with optimum properties.
The National Renewable Energy Laboratory initiated a Prize with support from Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL), and sponsored by the U.S. Department of Energy Water Power Technologies Office (DOE WPTO) to encourage ideas to reduce the time to commissioning for PSH projects. As a result, nine finalists have been chosen to develop their concepts in advance of the FAST Prize Pitch Contest to be held on October 7, 2019. The National Labs will provide technical and business advisement to the noted FAST Prize finalists in preparation for this Pitch Contest.
As one of the pressurized water reactor (PWR) internal components, baffle-former bolts (BFBs) are subjected to significant mechanical stress and neutron irradiation from the reactor core during the plant operation. Over the long operation period, these conditions lead to potential degradation and reduced load-carrying capacity of the bolts. In support of evaluating long-term operational performance of materials used in core internal components, the Oak Ridge National Laboratory (ORNL), through the Department of Energy (DOE), Light Water Reactor Sustainability (LWRS) Program, Materials Research Pathway (MRP) has harvested two high fluence BFBs from a commercial Westinghouse two-loop downflow type PWR. The two bolts of interest, i.e. bolts # 4412 and 4416, were withdrawn from service in 2011 as part of a preventative replacement plan. No identification of cracking or potential damage was found for these bolts during their removal in 2011. However, the bolts required a lower torque for removal from the baffle structure than the original torque specified during installation. Irradiation displacement damage levels in the bolts range from 15 to 41 displacements per atom. The goal of this project is to perform detailed microstructural and mechanical property characterization of BFBs following in-service exposures. The information from these bolts will be integral to the LWRS program initiatives in evaluating end of life microstructure and properties. Furthermore, valuable data will be obtained that can be incorporated into model predictions of long-term irradiation behavior and compared to results obtained in high flux experimental reactor conditions.
The project demonstrated how to “close the loop” on carbon fiber by integrating industrial carbon fiber scrap into new functional components in an automotive lightweighting application. The project serves as a validation of discontinuous recycled carbon fiber in a commercial context, while generating comprehensive material data throughout the production chain. To this end, the project exhibited increasing complexity as material evaluation progressed from benchtop to commercial scale through full-scale part production, with key material properties thoroughly characterized throughout the process. Of particular focus was the form of the fiber that was fed into compounding, as recycled fiber has historically been problematic to feed at commercial-scale. Carbon fiber is energy-intensive to manufacture, so reuse of existing fiber material can reduce costs and increase sustainability. Additionally, by integrating recovered short fiber into a thermoplastic, regrind processes can be used to provide feedstock for later generations of product. While regrind plastics are not “infinitely recyclable”, reusing the manufacturing scrap over several generations of products can greatly increase material sustainability and lower the fractional embodied energy of each successive product. As such, this project supports the IACMI technical goals of (1) 25% lower carbon fiber-reinforced polymer (CFRP) cost, (2) 50% reduction in CFRP embodied energy, and (3) 80% composite recyclability into useful products. The initial stage of the project involved down selecting surface treatment (sizing) chemistries. Sizing evaluations were performed on Vartega’s chemically recycled intermediate modulus fiber along with standard modulus dry scrap which was oversized with sizing provided by Michelman. More dramatic improvements from sizing were found on the standard rather than the intermediate modulus fibers. The strength of the chemically recycled individual fibers were evaluated by Michelman and ORNL through single fiber testing and found to be comparable to similarly evaluated virgin fibers. UDRI’s mechanical testing on injection molded test specimens identified similar mechanical properties and fiber distribution relative to benchmark specimens. Additional surface chemistry tests and visualizations were performed by the Colorado School of Mines to confirm close conformance between the benchmark and recycled-fiber specimens. As the mechanical test results exceeded the 80% threshold established as the go/no-go(GNG), the project scale was increased to use commercial-scale equipment that would both better characterize the manufacturing utility of the target product format and allow qualitative assessment of a complex commercial part. An upscaled compounding evaluation was performed with a 27 mm twin-screw compounding extruding using oversized standard modulus fibers that were formatted to improve bulk solids transfer. The project team anticipated that milestone mechanical benchmarks could be achieved given the favorable performance of the sized standard modulus material identified in the initial micro-compounding trials. While the mechanical performance did meet the milestone target for that phase of the project, mechanical properties for this standard modulus-based compound were still less than those of the Ford specification. To compare the performance, the project team oversized intermediate modulus dry fibers and compounded them with the project resin at BASF using a 40 mm compounder. Test specimen mechanical performance exceeded the targets laid out in both the project milestone and the Ford specification. A series of prototype parts were successfully molded, albeit with instances of short shot components due to the high thermal conductivity of the carbon fiber compared to glass fiber for which the prototype tool was designed for. The project demonstrated that recycled carbon fiber is a viable option in fiber reinforced compound, providing greatly increased strength and modulus for applications that require them. The “agglomerated” format that facilitated effective bulk solids transfer of recovered fiber showed promise for industrial application.
Critical electronics used for isotopes production have become outdated and difficult to manufacture. In particular the alpha-particle and neutron detection electronics (commonly referred to as Q2809A-9 and -11) which are used to monitor effluent activity in ORNL Building 7920 were designed and deployed in 1966-67. These electronics are still used but some parts are no longer available for purchase. In addition, the printed circuit boards used in the Count Rate Monitor (CRM) module have no fabrication files or quality assurance documentation. In light of this, a project to modernize the modules for ability to manufacture with modern parts was undertaken. Both the preamplifier and CRM were modernized with new printed circuit boards and parts which are current catalog parts. In addition, QA documentation was generated which allows the manufacturer to assure proper operation prior to delivery.
Real-time, in-situ, high spatial resolution (sub-cm) imaging of the near-borehole environment would revolutionize wellbore diagnostics and integrity assessment by direct observation of defects. It is becoming increasingly apparent, that better understanding of the near-wellbore environment is required to meet the safety and operational needs in challenging environments such as those present in subsurface energy extraction (geothermal) and storage (CO2 sequestration) applications. Therefore, it is important to have a more robust ability to image the near-borehole and reliably detect defects. It was proposed to further develop and improve our advanced 3D imaging system to evaluate casing defects (e.g. corrosion) and cement quality in either open- or cased-borehole with the ultimate goal to develop a commercially deployable technology. The system consists of a unique acoustic source (LANL) and advanced inversion techniques for image processing (LANL, ORNL). This system will provide comprehensive borehole integrity monitoring with improved resolution over existing techniques. As an application of this imaging system, we will characterize the effectiveness of next-generation wellbore completion technology (NETL, SNL), and will demonstrate that, unlike current technology, the proposed approach can successfully characterize foamed cements.
Large Scale Extrusion Deposition (LSED) is an evolving additive manufacturing (AM) technology that research, such as that taking place at Oak Ridge National Laboratory (ORNL) and companies like Local Motors, are continuing to utilize and develop new applications. A major LSED application of interest has been molds and tooling as it allows for much shorter production time and lower cost. However, interest has been expanding into using LSED for more structural applications due to more frequent use of high performing polymer composites as feedstock. The use of LSED for structural applications is of particular interest to Local Motors as it is currently being used to create commercially viable, energy efficient electric vehicles. LSED offers a unique opportunity when compared to traditional manufacturing methods as it can significantly reduce the number of components necessary, while decreasing embodied energy and carbon emissions. Even with these benefits however, it is important that LSED is properly understood from a structural aspect as this field has not been as heavily researched as tooling. To ensure a high level of safety and repeatability is an essential responsibility of a manufacturer whose products are structural in nature. As such it is important to understand the materials and LSED process to make structural objects that the manufacturer can be confident in. The main goals of this project were to: develop and investigate materials that are of interest for structural LSED applications, further develop and understand the current machines used in LSED and develop simulations tools of LSED and the mechanical properties of the created structure. Material development focused on composite materials that have high mechanical properties and are stable in a variety of environments. The materials were tested to determine their as printed mechanical and thermal properties as these are necessary for simulations. Once the materials were investigated thoroughly, it allowed for simulations to be performed to compare to experimental data with simulations. Materials were also vetted to determine candidates for multi-material printing. The machine development focused around the areas of process monitoring, non-destructive evaluation, and quality control. Finally, the goal of the simulations was to develop a realistic model of printed structures, including in-process simulation and dynamic simulation. The routes to get to some of these goals and the depth in which they were investigated changed throughout the project due to personnel changes and the COVID-19 pandemic. This project resulted in many valuable results such as the development of an nondestructive evaluation (NDE) technique for interlayer defects, proof of simulation for warpage in simple parts, the development and utilization of a profilometer to monitor a print for defects or inconsistencies, thorough investigation of a material used commercially for structural LSED applications and valuable experimental data on the applicability and advantages of multi-material crush structures versus their neat counterparts by creation and testing of samples.
The U.S. Department of Energy (DOE) is promoting and developing more energy efficient and environmentally friendly technologies that will enable America to use less petroleum. Hydrogen fuel cells – which directly convert the chemical energy in hydrogen to electricity with only water and heat as byproducts – are a very attractive solution that can enable this to happen. To date, DOE's efforts have culminated in commercial demonstration of on-board vehicular hydrogen storage systems that can allow for a driving range of greater than 300 miles. This requires storing 5 Kgs of hydrogen onboard a light vehicle. In order to store this quantity of hydrogen, the hydrogen gas needs to be stored in a composite overwrapped pressure vessel (COPV) at a very high internal pressure. The objective of the program was to demonstrate continuous and predictable health-monitoring of composite pressure vessels. A higher confidence in the operational safety of the vessels will lead to reduced burst factor of safety imposed by regulatory standards and hence will help reduce the structural wall thickness that drives the cost of the vessel. Highly optimized Type III (metal lined) and Type IV (polymer lined) COPVs that are manufactured using filament winding process have been designed and qualified for the above mentioned application. However, the main structural component of the COPVs is carbon fiber and the high cost of carbon fiber composite in a pressure vessel is a primary challenge in reducing the cost of gaseous hydrogen storage. Continuous and remote monitoring of structural health of the COPVs as well as optimization of the strength translation of carbon fibers have the potential to allow for reduced factor of safety, thereby reduced amount of carbon and associated cost of the vessel. In the current program, the project team including Steelhead Composites (SHC), University of Tennessee, Knoxville (UTK), Teijin Carbon America, Oak Ridge National Laboratory (ORNL) and LUNA designed, fabricated, and tested smart composite pressure vessels with integrated sensors. Iterative loops of design and testing using coupons, subscale STEB vessels and full size vessels proved that a new generation of high performance carbon fiber can be used for efficient design of Type 3 vessels for H2 storage. Novel analysis techniques were developed to predict the initiation and propagation of interlaminar damage inside the composite shell due to impact damage, a real threat in practical operation. Such an analysis scheme is typically not used in tank design but is an essential tool for health monitoring of composite vessels. Remote sensing of the key signatures of the tank’s operating parameters such as pressure, acceleration and humidity was demonstrated using a unique device that can wirelessly transmit and stream the data to a remote server. Fiber optic sensors were successfully integrated during fabrication of the tanks. These sensors provide a wealth of information regarding the structural health of the vessel when it is subsequently pressurized or subjected to impact damage. Excellent correlation was demonstrated between the fiber optic sensor and mechanical strain gage data, and between the measurements and analytical predictions.
A virtual summit on decarbonizing the agriculture sector was organized on September 21-22, 2021, by Oak Ridge National Laboratory (ORNL) in anticipation of federal activities surrounding a greater role for the US Department of Energy (DOE) in support of the US Department of Agriculture (USDA) in areas related to climate and carbon impacts on the US agriculture sector. A series of thought-provoking talks were presented by leaders from industry, academia, and DOE (see attachment—final agenda, Appendix A). About 50 to 70 scientists and engineers actively participated at any one time during the summit in the talks and in the topical breakouts (Appendix B).
An Oxygen Transport Membrane (OTM) combined reforming technology for producing syngas and hydrogen integrates the advantages of multiple processes—steam methane reforming (SMR), autothermal reforming (ATR), an air separation unit (ASU)—into a single integrated technology. The OTM consists of a primary reforming tube, in which desulfurized natural gas is partially reformed by steam at high pressure in the presence of a metal catalyst. This process is followed in series by a ceramic OTM with a secondary reformer, in which residual methane reforms and O 2 - ions react with a portion of the CO and H 2 fuel to provide the heat to support both primary and secondary reforming. Although the OTM combined reformer technology for syngas and H 2 production has been substantially developed in the last decade, several challenges that affect the overall production efficiency and reliability are yet to be fully understood, addressed, and resolved. Therefore, developing Computational Fluid Dynamics (CFD) models that incorporate fluid dynamics, mass transport, kinetics, heat transport, and structural mechanics is critical to understanding and minimizing the probability of tube failures during the startup and operation. In this report, an exhaustive literature review was performed to survey the current state of technology for producing syngas and H 2 using either conventional or renewable energy sources. The feedstocks reviewed include natural gas and coal for the conventional technologies, whereas biomass, solar, wind, and nuclear energy for the renewable technologies. The existing industry-grade COMSOL multiphysics models of OTM were upgraded for the latest software release. In addition, they were improved to help achieve grid and solver independence and were successfully ported on the ORNL high-performance computing clusters to speed up their run times. A 42% reduction in the simulation run time was achieved. A new higher-fidelity CFD model of an OTM tube was developed in the StarCCM+ simulation platform. This new model was designed to simulate various physics using first principles, e.g., turbulent flow, heat transfer, and chemical reactions while avoiding unnecessary simplifications. The resulting predictions were qualitatively assessed and provided useful insights into the multiphysics complexity of an OTM tube.
Under the Consortium for the Advanced Simulation of Light Water Reactors (CASL) Program, the Virtual Environment for Reactor Applications (VERA) was developed with the primary focus to model pressurized water reactors (PWRs). Recently, a new project was started to extend the modeling capability in VERA to model boiling water reactors (BWRs). The new project is called “Modeling and Analysis of Exelon BWRs for Eigenvalue and Thermal Limits Predictability,” and it is led by Oak Ridge National Laboratory (ORNL) and Exelon with participation from Global Nuclear Fuel and three universities: North Carolina State University (NCSU), the University of Michigan, and the University of Illinois.
Surface waters represent important sources of alternate energy and drinking water in the United States, and characterizing the biogeochemical processes that affect surface water quality is relevant to the DOE-BER mission. Sediment biogeochemical processes regulate the release of carbon (C), nutrients, and contaminants to surface waters and thus influence water quality. Sediment biogeochemical processes are dynamic and affected by the deposition and remobilization of solid material and changes in environmental conditions driven by water discharge variations. Wetlands are important natural filters of surface waters which may either trap, metabolize, or mobilize nutrients and contaminants. Despite their importance, biogeochemical processes regulating nutrient and contaminant release and C transformation in stream and wetland sediments cannot be predicted accurately by current mathematical models. These reactive transport models largely rely on detectable changes in geochemical conditions to activate metabolic processes, do not accurately account for the competition between microbial processes, and poorly constrain effects of hydrological perturbations on biogeochemical processes. In this BER-SBR exploratory project, metagenomic and geochemical signatures were combined to identify microbially-mediated redox processes in anaerobic stream and wetland sediments from the Savannah River Site (SRS, ANL SFA) and East Fork Poplar Creek (EFPC, ORNL SFA) that play important roles in C, uranium (U), and mercury (Hg) transformations. In addition, sediment incubations were conducted to examine the competition between anaerobic respiration processes Finally, new rate laws were developed for reactive transport models that rely on complementary metagenomic and geochemical signatures to identify the underlying anaerobic microbial processes in stream and wetland sediments, describe the competition between the dominant metabolic processes involved in nutrient release and U and Hg mobilization, and more accurately quantify carbon transformation and the response of microbial processes to changes in redox conditions associated with hydrological forcing. These rate laws were optimized in batch reactors with SRS wetland sediments, where iron and sulfate reduction dominate. Anaerobic carbon remineralization processes followed the expected thermodynamic sequence of microbial respiration with depth in both sediments, except that geochemical signals indicated that sulfate reduction was inactive in EFPC sediments and moderate in SRS wetland sediments. Estimates indicated that microbial iron reduction contributed to at least half of the production of reduced iron in these sediments. Incubations demonstrated that nitrate reduction, denitrification, and dissimilatory nitrate reduction to ammonium were active in the natural EFPC sediment and activated upon nitrate amendment in these nitrate-rich sediments. In turn, these processes were outcompeted by the addition of either iron oxides or sulfate as alternative terminal electron acceptors. Although geochemical products of sulfate reduction were not detected in the incubations, the abundance of sulfate reduction genes increased with depth in the sediment and was equally more pronounced in treatments amended with either iron oxides or sulfate. Simultaneously, anaerobic sulfide oxidizing bacteria coupling sulfide oxidation to DNRA (and not conventional denitrification) were apparently enriched over time, regardless of the treatments. These findings indicate that sulfate reduction is important in freshwater stream sediments and probably catalyzed by a cryptic sulfur cycle involving nitrogen species, in which the sulfur products from sulfate reduction are immediately removed by side reactions and not detectable by geochemical measurements alone. Similar experiments in SRS sediments, however, demonstrated little interaction between nitrogen and sulfur cycling microorganisms. Sulfate reduction was impacted by the addition of more thermodynamically favorable electron acceptors, suggesting either that iron-reducing microorganisms outcompeted sulfate-reducing microorganisms for organic substrate, depleting the stock of electron donor available for sulfate reduction, or that the cryptic sulfur cycle was shunted by the precipitation of FeS generated as a result of the abiotic reduction of iron oxides by dissolved sulfide. A diagnostic modeling exercise was conducted to further investigate the competition between terminal electron accepting processes. As conventional kinetic models typically do not account for cryptic cycles and used inaccurate formulations to describe competition between microbial communities, new metabolic rate laws were developed that explicitly express the electron acceptor-specific enzyme of each energetically favorable metabolic process based on gene abundance detected in the incubations. The model was tested with the sediment slurry incubation data to determine whether substrate competition could explain the decrease in sulfate reduction observed in the presence of iron oxide competitor. The model was able to reproduce geochemical concentrations really well in each treatment once the model was calibrated with the unamended control, suggesting that microbial competition was indeed driven by thermodynamic considerations. Overall, carbon remineralization processes and rates will be reproduced much more realistically with the new metabolic rate laws.