Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Module scale model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Discussing direct search of dark matter particles in the minimal supersymmetric extension of the standard model with light neutralinos

We examine the status of light neutralinos in an effective minimal supersymmetric extension of the standard model at the electroweak scale which was considered in the past and discussed in terms of the available data of direct searches for dark matter particles. Our reanalysis is prompted by new measurements at the Tevatron and B factories which might potentially provide significant constraints on the minimal supersymmetric extension of the standard model. Here we examine in detail all these new data and show that the present published results from the Tevatron and B factories have only a mild effect on the original light-neutralino population. This population, which fits quite well the DAMA/LIBRA annual modulation data, would also agree with the preliminary results of CDMS, CoGeNT, and CRESST, should these data, which are at present only hints of excesses of events over the expected backgrounds, be interpreted as authentic signals of dark matter. For the neutralino mass we find a lower bound of 7-8 GeV. Our results differ from some recent conclusions by other authors because of a few crucial points which we try to single out and elucidate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Agroecosystem model simulations reveal spatial variability in relative productivity in biomass sorghum and maize in Iowa, USA

Biomass sorghum (Sorghum bicolor L. Moench) is an annual C 4 grass that has emerged as a candidate bioenergy crop but has not been widely grown in the United States. Corn (Zea mays L.), another annual C 4 grass, has been produced on a large scale in the United States for biofuels. Iowa leads the nation in both corn and ethanol production. The high productivity of corn in Iowa creates the research question: could biomass sorghum be as or more productive than corn in the state in terms of bioenergy? Efforts to use crop models to fill the gaps left by field experimentation on biomass sorghum have also been limited thus far. To address our research question, we collected biophysical data on biomass sorghum grown in Iowa for two growing seasons, used them to develop a biomass sorghum module in an agroecosystem model (Agro-IBIS), and predict the potential performance of biomass sorghum across Iowa compared to maize. Despite dry conditions in 2019 and 2020, average biomass sorghum yields were 17.20 Mg ha –1 . By comparison, average corn aboveground biomass was higher in 2020 (22.02 Mg ha –1 ). Soil cores indicated average belowground biomass of 1.46 Mg ha –1 , with roots concentrated near the surface (73% of biomass above 50 cm in a 1 m core). When biomass sorghum model parameters were calibrated with measured values, model output was in close agreement with measured biomass (slope = 0.932, R 2 = 0.91) and evapotranspiration (slope = 0.757, R 2 = 0.64). Subsequent regional simulations revealed a notable latitudinal gradient in biomass sorghum yield, with a strong linear relationship between yield and seasonal growing degree-days (R 2 = 0.89). When these yields were compared to simulated corn aboveground biomass yields, only 3.4% of the state had biomass sorghum yields that were significantly higher than corn. This number was reduced to 0.3% when comparing the crops in terms of energy ethanol yield. Thus, we conclude biomass sorghum must be improved to be competitive with corn as an annual biofuel crop in Iowa. This study provides a baseline against which to compare advancements in sorghum breeding for biomass and stress tolerance in Iowa.

Agro-IBIS↗

Mechanical and Thermal Forcing for Upslope Flows and Cumulus Convection over the Sierras de Córdoba

Abstract The upslope flow processes affecting the vertical extent of orographic cumulus convection are examined using observations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. Specifically, clear air returns from the U.S. Department of Energy (DOE) second-generation C-band scanning Atmospheric Radiation Measurement (ARM) precipitation radar (CSAPR2) are used to characterize the structure and variability of the ridge-normal (i.e., up/downslope) flow components, which transport mass to the crest of Argentina’s Sierras de Córdoba and contribute to convective initiation. Data are compiled for the entire CACTI period (October–April), including days with clear skies, shallow cumuli, cumulus congestus, and deep convection. To examine shared variability among >70 000 radar scans, we use (i) a principal component analysis (PCA) to isolate modes of variability in the upslope flow and (ii) composite analysis based on convective outcomes, determined from GOES-16 satellite observations. These data are contextualized with observed surface sensible heat fluxes, thermodynamic profiles, and synoptic-scale analysis. Results indicate distinct thermally and mechanically forced upslope flow modes, modulated by diurnal heating and synoptic-scale variations, respectively. In some instances, there is a superposition of thermal and mechanical forcing, yielding either deeper or shallower upslope flow. The composite analyses based on satellite data show that successively deeper convective outcomes are associated with successively deeper upslope flow layers that more readily transport mass to the ridge crest in conjunction with lower lifting condensation levels, facilitating convective initiation. These results help to isolate the forcing mechanisms for orographic convection and thus provide a foundation for parameterizing orographic convective processes in coarse resolution models.

Meteorology & Atmospheric Sciences↗

Measuring X-Ray Emission Line Shapes in Neutral Species for XRISM Calibration

Space X-ray spectrometers such as the Resolve instrument on XRISM require precise calibration in order to interpret the spectra of astrophysical objects. Key components of the calibration are the energy scale and the core line spread function, both of which vary with photon energy. A major issue in the calibration of high-resolution spectrometers is locating good calibrators with well-known and stable intrinsic line shapes. Neutral fluorescence is widely used, but inner-shell transitions in neutral atoms often exhibit complex, poorly documented line shapes that vary with excitation conditions. Here, in this study, we present empirical measurements of K-shell transitions in neutral O and F below 1 keV using an engineering model XRISM calorimeter array, an electron bombardment modulated X-ray source, and an electron beam ion trap (EBIT) to provide a precise energy reference. In addition, we report measurements of the Mo Lα complex with the transition-edge microcalorimeter spectrometer (TEMS), which reveal strong satellite structure and sensitivity of the line shape to the incident exciting spectrum. Together, these results demonstrate the need for empirical line-shape models, highlight the nonstationary nature of neutral fluorescence features, and define a path toward developing transfer standards for XRISM and future precision instruments such as Athena/X-IFU.

Astronomy and AstroPhysics↗

System-Level Thermal Management and Reliability of Automotive Electronics: Goals and Opportunities Using Phase-Change Materials

Abstract Electronic packaging for automotive applications are at particular risk of thermomechanical failure due to the naturally harsh conditions it is exposed to. With the rise of electric and hybrid electric vehicles (EVs and HEVs), combined with a desire to miniaturize, the challenge of removing enough heat from electronic devices in automotive vehicles is evolving. This paper closely examines the new challenges in thermal management in various driving environments and aims to classify each existing cooling method in terms of performance. Particular focus is placed upon emerging solutions regarded to hold great potential, such as phase-change materials (PCMs). PCMs have been regarded for some time as a means of transferring heat quickly away from the region with the electronic components and are widely regarded as a possible means of carrying out cooling in large scale from small areas, because of their high latent heat of fusion, high specific heat, temperature stability, and small volume change during phase change, etc. They have already been utilized as a method of passive cooling in electronics in various ways, but their adoption in automotive power electronics, such as in traction inverters, has yet to be fulfilled. A brief discussion is made on some of the potential areas of application and challenges relating to more widespread adoption of PCMs, with reference to a case study using computational model of a commercially available power module used in automotive applications.

Engineering↗

Superconductivity in the doped Hubbard model and its interplay with next-nearest hopping t ′

The Hubbard model is widely believed to contain the essential ingredients of high-temperature superconductivity. However, proving definitively that the model supports superconductivity is challenging. Here, we report a large-scale density matrix renormalization group study of the lightly doped Hubbard model on four-leg cylinders at hole doping concentration δ = 12.5%. We reveal a delicate interplay between superconductivity and charge density wave and spin density wave orders tunable via next-nearest neighbor hopping t ′. For finite t ′, the ground state is consistent with a Luther-Emery liquid with power-law superconducting and charge density wave correlations associated with half-filled charge stripes. In contrast, for t ′ = 0, superconducting correlations fall off exponentially, whereas charge density and spin density modulations are dominant. Our results indicate that a route to robust long-range superconductivity involves destabilizing insulating charge stripes in the doped Hubbard model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Baryon acoustic oscillations in thin redshift shells from BOSS DR12 and eBOSS DR16 galaxies

ABSTRACT In an age of large astronomical data sets and severe cosmological tensions, the case for model independent analyses is compelling. We present a set of 14 baryon acoustic oscillations measurements in thin redshift shells with $3\,\mathrm{ per} \,\mathrm{ cent}$ precision that were obtained by analysing BOSS DR12 and eBOSS DR16 galaxies in the redshift range 0.32 < z < 0.66. Thanks to the use of thin shells, the analysis is carried out using just redshifts and angles so that the fiducial model is only introduced when considering the mock catalogues, necessary for the covariance matrix estimation and the pipeline validation. We compare our measurements, with and without supernova data, to the corresponding constraints from Planck 2018, finding good compatibility. A Monte Python module for this likelihood is available at github.com/ranier137/angularBAO.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of phase lag on uniformity in pulsed capacitively coupled plasmas

Process uniformity of macro-scale parameters such as electron and ion densities is critical during any plasma process. Pulsed operation of multiple frequency capacitively coupled plasmas (CCPs) has been shown to improve profile characteristics of features during plasma etching. In this work, we consider pulsing of both power sources in a dual frequency CCP. The impact of phase lag between the high frequency and low frequency power pulses on plasma uniformity is examined using a two-dimensional computational plasma model. Results for Ar/CF{sub 4} gas mixture indicate that phase lag allows one to control plasma uniformity by modulating the time for which the high or low frequency source is on.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Momentum dependent dark matter scattering

It is usually assumed that WIMPs interact through spin-independent and spin-dependent interactions. Interactions which carry additional powers of the momentum transfer, q{sup 2}, are assumed to be too small to be relevant. In theories with new particles at the ∼ GeV scale, however, these q{sup 2}-dependent interactions can be large, and, in some cases dominate over the standard interactions. This leads to new phenomenology in direct detection experiments. Recoil spectra peak at non-zero energies, and the relative strengths of different experiments can be significantly altered. We present a simple parameterization for models of this type which captures much of the interesting phenomenology and allows a comparison between experiments. As an application, we find that dark matter with momentum dependent interactions coupling to the spin of the proton can reconcile the DAMA annual modulation result with other experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Generation of the Higgs condensate and its decay after inflation

We investigate the dynamics of the Standard Model higgs with a minimal coupling to gravity during and after inflation. In the regime where the Standard Model vacuum is stable, we find that the higgs becomes a light spectator field after about 30 efolds of inflation, irrespectively of its initial value. Once the higgs has become light, its root-mean-square value h{sub *} relaxes to equilibrium in about 85 efolds for the inflationary scale of H{sub *} = 10{sup 4} GeV and in 20 efolds for H{sub *} = 10{sup 10} GeV. The equilibrium value is given by h{sub *} ∼ 0.36λ{sub *}{sup −1/4}H{sub *}, where λ{sub *} = 0.09...0.0005 is the higgs self coupling at the scales H{sub *} = 10{sup 4}...10{sup 10} GeV. We show that the main decay channel of the higgs condensate after inflation is the resonant production of Standard Model gauge bosons. For a set of parameters we find that a significant part of the condensate has decayed in between 340 and 630 Hubble times after the onset of higgs oscillations, depending on H{sub *} in a non-trivial way. The higgs perturbations correspond to isocurvature modes during inflation but they could generate significant adiabatic perturbations at a later stage for example through a modulation of the reheating stage. However, this requires that the inflaton(s) decay no later than a few hundred Hubble times after the onset of higgs oscillations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficient α, β-motif finder for identification of phenotype-related functional modules

Background: Microbial communities in their natural environments exhibit phenotypes that can directly cause particular diseases, convert biomass or wastewater to energy, or degrade various environmental contaminants. Understanding how these communities realize specific phenotypic traits (e.g., carbon fixation, hydrogen production) is critical for addressing health, bioremediation, or bioenergy problems. Results: In this paper, we describe a graph-theoretical method for in silico prediction of the cellular subsystems that are related to the expression of a target phenotype. The proposed (a, b)-motif finder approach allows for identification of these phenotype-related subsystems that, in addition to metabolic subsystems, could include their regulators, sensors, transporters, and even uncharacterized proteins. By comparing dozens of genome-scale networks of functionally associated proteins, our method efficiently identifies those statistically significant functional modules that are in at least a networks of phenotype-expressing organisms but appear in no more than b networks of organisms that do not exhibit the target phenotype. It has been shown via various experiments that the enumerated modules are indeed related to phenotype-expression when tested with different target phenotypes like hydrogen production, motility, aerobic respiration, and acid-tolerance. Conclusion: Thus, we have proposed a methodology that can identify potential statistically significant phenotyperelated functional modules. The functional module is modeled as an (a, b)-clique, where a and b are two criteria introduced in this work. We also propose a novel network model, called the two-typed, divided network. The new network model and the criteria make the problem tractable even while very large networks are being compared. The code can be downloaded from http://www.freescience.org/cs/ABClique/

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measured and Calculated DC Arc-Flash Incident Energy in a Large-Scale Photovoltaic Plant

There is a growing amount of high-power dc equipment being deployed, including solar photovoltaic (PV) plants, but very few studies have measured and quantified dc arc-flash risks. Most dc arc-flash literature is based on the theory and, when their theoretical calculations are applied to real-world conditions, can significantly deviate from actual measured values. For PV, the nonlinearity of the power source (i.e., PV modules) creates an additional level of uncertainty for theoretical approaches. This paper quantifies the thermal hazards from arc flash in a real-world 1000-kWdc PV plant by measuring arc current, arc voltage, and incident energy (IE) and then compares results against existing IE models. The study reveals that none of the available models adequately represent real-world hazards. It is also found that a PV source acts as a sustainable constant-current source during an arcflash event. As a result, this paper is an important first step toward developing an improved model that more accurately assesses dc arc-flash risk in a PV system.

14 SOLAR ENERGY↗

Photovoltaic (PV) Module Technologies: 2020 Benchmark Costs and Technology Evolution Framework Results

This report benchmarks 2020 PV module minimum sustainable price (MSP) via bottom-up manufacturing cost analysis, for established PV technologies in mass production, including crystalline silicon, cadmium telluride (CdTe), and copper indium gallium (di)selenide. We provide technology roadmaps to additional MSP reductions for these PV technologies. Separately, we consider III-V and perovskite PV technologies which are currently in small-scale or pilot production. Finally, this report uses a technology evolution framework (TEF) to analyze drivers of levelized cost of energy reductions, including installed system cost - which is heavily influenced by module price - as well as service life and annual energy yield.

14 SOLAR ENERGY↗

Dust-acoustic wave modulation in the presence of superthermal ions

A study is presented of the nonlinear self-modulation of low-frequency electrostatic (dust acoustic) waves propagating in a dusty plasma, in the presence of a superthermal ion (and Maxwellian electron) background. A kappa-type superthermal distribution is assumed for the ion component, accounting for an arbitrary deviation from Maxwellian equilibrium, parametrized via a real parameter {kappa}. The ordinary Maxwellian-background case is recovered for {kappa}{yields}{infinity}. By employing a multiple scales technique, a nonlinear Schroedinger-type equation (NLSE) is derived for the electric potential wave amplitude. Both dispersion and nonlinearity coefficients of the NLSE are explicit functions of the carrier wavenumber and of relevant physical parameters (background species density and temperature, as well as nonthermality, via {kappa}). The influence of plasma background superthermality on the growth rate of the modulational instability is discussed. The superthermal feature appears to control the occurrence of modulational instability, since the instability window is strongly modified. Localized wavepackets in the form of either bright-or dark-type envelope solitons, modeling envelope pulses or electric potential holes (voids), respectively, may occur. A parametric investigation indicates that the structural characteristics of these envelope excitations (width, amplitude) are affected by superthermality, as well as by relevant plasma parameters (dust concentration, ion temperature)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of moisture on microbial decomposition phenotypes and enzyme dynamics

Soil organic matter decomposition is a complex process reflecting microbial composition and environmental conditions. Moisture can modulate the connectivity and interactions of microbes. Due to heterogeneity, a deeper understanding of the influence of soil moisture on the dynamics of organic matter decomposition and resultant phenotypes remains a challenge. Soils from a long-term field experiment exposed to high and low moisture treatments were incubated in the laboratory to investigate organic matter decomposition using chitin as a model substrate. By combining enzymatic assays, biomass measurements, and microbial enrichment via activity-based probes, we determined the microbial functional response to chitin amendments and field moisture treatments at both the community and cell scales. Chitinolytic activities showed significant responses to the amendment of chitin, independent of differences in field moisture treatments. However, for other measurements of carbon metabolism and cellular functions, soils from high moisture field treatments had greater potential enzyme activity than soils from low moisture field treatments. A cell tagging approach was used to enrich and quantify bacterial taxa that are actively producing chitin-degrading enzymes. By integrating organism, community, and soil core measurements we show that (i) a small subset of taxa compose the majority (>50%) of chitinase production despite broad functional redundancy, (ii) the identity of key chitin degraders varies with moisture level, and (iii) extracellular enzymes that are not cell-associated account for most potential chitinase activity measured in field soil.

activity-based probes↗

Plant, microbial and ecosystem carbon use efficiencies interact to stabilize microbial growth as a fraction of gross primary production

Summary The carbon use efficiency of plants ( CUE a ) and microorganisms ( CUE h ) determines rates of biomass turnover and soil carbon sequestration. We evaluated the hypothesis that CUE a and CUE h counterbalance at a large scale, stabilizing microbial growth (μ) as a fraction of gross primary production ( GPP ). Collating data from published studies, we correlated annual CUE a , estimated from satellite imagery, with locally determined soil CUE h for 100 globally distributed sites. Ecosystem CUE e , the ratio of net ecosystem production ( NEP ) to GPP , was estimated for each site using published models. At the ecosystem scale, CUE a and CUE h were inversely related. At the global scale, the apparent temperature sensitivity of CUE h with respect to mean annual temperature ( MAT ) was similar for organic and mineral soils (0.029°C −1 ). CUE a and CUE e were inversely related to MAT , with apparent sensitivities of −0.009 and −0.032°C −1 , respectively. These trends constrain the ratio μ : GPP (= (CUE a × CUE h )/(1 − CUE e )) with respect to MAT by counterbalancing the apparent temperature sensitivities of the component processes. At the ecosystem scale, the counterbalance is effected by modulating soil organic matter stocks. The results suggest that a μ : GPP value of c . 0.13 is a homeostatic steady state for ecosystem carbon fluxes at a large scale.

Sinsabaugh, Robert L.↗

Estimating CO 2 fluxes through integrating spatial and temporal input layers via deep learning algorithms

Background Accurate estimation of net ecosystem exchange of CO 2 fluxes (Fc) is essential for understanding carbon cycle processes and assessing ecosystem carbon budgets. However, conventional modeling approaches often emphasize temporal dynamics while overlooking the pronounced spatial heterogeneity within the footprint of eddy covariance (EC) towers, potentially limiting predictive accuracy and interpretability of Fc estimates. To address this challenge, we developed a spatiotemporal model that integrates high-resolution footprint-weighted spatial information with sequential environmental drivers. Results The integrated model combines a deeper graph convolutional network to characterize fine-scale spatial variability within EC footprints and a gated recurrent unit network to capture temporal dependencies in biophysical conditions. Using multi-year flux tower observations, remote sensing vegetation indices and footprint modeling, we evaluate the proposed method across three land cover types. This spatiotemporal model consistently outperforms temporal-only and spatial-only baselines, achieving the highest overall accuracy (R 2 = 0.9569) and the lowest RMSE (1.8128 μmol m −2 s −1 ) and MAE (1.1939 μmol m −2 s −1 ). Performance gains are particularly evident in ecosystems with strong vegetation heterogeneity, where spatial structure substantially modulates Fc variability. Conclusions This study demonstrates the importance of joint modeling spatial heterogeneity and temporal dynamics for improving Fc estimation and provides a robust method for advancing footprint-based Fc estimates across diverse ecosystems, supporting refined assessments of terrestrial carbon fluxes, and enhancing scientific foundations for carbon studies.

CO2 flux estimate↗