Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Top-emission Si-based phosphor organic light emitting diode with Au doped ultrathin n-Si film anode and bottom Al mirror

We report a highly efficient top-emission Si-based phosphor organic light emitting diode (PhOLED) with an ultrathin polycrystalline n-Si:Au film anode and a bottom Al mirror. This anode is formed by magnetron sputtering followed by Ni induced crystallization and then Au diffusion. By optimizing the thickness of the n-Si:Au film anode, the Au diffusion temperature, and the other parameters of the PhOLED, the highest current and power efficiencies of the n-Si:Au film anode PhOLED reached 85{+-}9 cd/A and 80{+-}8 lm/W, respectively, corresponding to an external quantum efficiency of 21{+-}2% and a power conversion efficiency of 15{+-}2%, respectively, which are about 60% and 110% higher than those of the indium tin oxide anode counterpart and 70% and 50% higher than those of the bulk n{sup +}-Si:Au anode counterpart, respectively.

36 MATERIALS SCIENCE↗

Colored hard coatings with AlN–TiN multilayer structures

AlN–TiN multilayer structures can be used to extend the color gamut of hard coatings while maintaining good hardness and corrosion resistance. This study used reactive magnetron sputtering on a glass substrate to produce coatings with a microhardness of 19 GPa as well as optical reflectance exceeding 80% and controllable saturation (chroma) for various hues of red, yellow, green, blue, and purple. The authors characterized the complex index of refraction of the TiN films using ellipsometry; the real refractive indices of the AlN films were derived from the reflectance values obtained using photometry. Finally, the colors of the samples were quantified using CIE-1931 chromaticity coordinates in the L*a*b* color space, and the microhardness of the films was measured using a nanoindenter. Simulation results using a multiple-beam-interference recursive method presented good consistency with experimental measurements with regard to the optical reflective spectra of AlN–TiN multilayer thin film samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat- and radiation-resistant contacts to SiC made on the basis of quasi-amorphous ZrB{sub 2} films

The radiation and thermal stability of the Schottky-barrier structures deposited by the magnetron sputtering of zirconium diboride onto the (0001) face of the Lely-grown n-6H(15R)SiC single crystals with the uncompensated-donor concentration of {approx}10{sup 18} cm{sup -3} was investigated by the methods of the I-V and C-V characteristics combined with the layer-by-layer Auger analysis. It is shown that the use of quasi-amorphous ZrB{sub 2} films when manufacturing contacts on n-6H(15R)SiC leads to no changes in the Schottky-barrier characteristics during rapid thermal annealing to 800 deg. C in the range of {sup 60}Co {gamma}-ray irradiation doses of 10{sup 3}-10{sup 7} Gy.

36 MATERIALS SCIENCE↗

High performance AlScN thin film based surface acoustic wave devices with large electromechanical coupling coefficient

AlN and AlScN thin films with 27% scandium (Sc) were synthesized by DC magnetron sputtering deposition and used to fabricate surface acoustic wave (SAW) devices. Compared with AlN-based devices, the AlScN SAW devices exhibit much better transmission properties. Scandium doping results in electromechanical coupling coefficient, K{sup 2}, in the range of 2.0% ∼ 2.2% for a wide normalized thickness range, more than a 300% increase compared to that of AlN-based SAW devices, thus demonstrating the potential applications of AlScN in high frequency resonators, sensors, and high efficiency energy harvesting devices. The coupling coefficients of the present AlScN based SAW devices are much higher than that of the theoretical calculation based on some assumptions for AlScN piezoelectric material properties, implying there is a need for in-depth investigations on the material properties of AlScN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large coercivity and exchange bias in [Fe{sub 1-{delta}}(FeO){sub {delta}}]{sub x}(TiO{sub 2}){sub 1-x} granular films

[Fe{sub 1-{delta}}(FeO){sub {delta}}]{sub x}(TiO{sub 2}){sub 1-x} (0{<=}{delta}{<=}0.91, 0.34{<=}x{<=}0.54) granular films were fabricated by magnetron sputtering. Large coercivity (H{sub C} = 10.5 kOe) and exchange-bias-field (H{sub E} = 6.5 kOe) at 5 K were found in the film with {delta}=0.84 and x = 0.48. AC susceptibility measurements exhibit a frequency (f) dependent peak T{sub f} in the in-phase susceptibility curve. The fitting of the relation of T{sub f} vs f with both the Vogel-Fulcher law and critical slowing down theory indicate that the evident enhancement of the H{sub C} and H{sub E} can be qualitatively ascribed to the existence of cluster-spin glass state. The results may help to deeply understand the origin of exchange bias and related effects.

36 MATERIALS SCIENCE↗

The New ESRF Multilayer Facility: Progress and Perspectives

In view of the increasing need for high quality multilayer based x-ray optics the ESRF decided to upgrade its multilayer facility. During the last years a new deposition system was designed, installed, and commissioned. Since 2008 the new laboratory is operational and has produced its first optical elements for ESRF beamlines. The deposition system is based on magnetron sputtering and can cover optical surfaces up to 1000x150 mm{sup 2} with uniform or graded coatings. Four cathodes allow the use of conducting, insulating, and ferromagnetic target materials. This work will provide an overview on the machine conception and its overall performance, including a comparison with the formerly used system. It will be complemented by first fabrication results and perspectives for future projects in the framework of the ESRF Upgrade Programme.

43 PARTICLE ACCELERATORS↗

Cu diffusion in single-crystal and polycrystalline TiN barrier layers: A high-resolution experimental study supported by first-principles calculations

Dense single-crystal and polycrystalline TiN/Cu stacks were prepared by unbalanced DC magnetron sputter deposition at a substrate temperature of 700 °C and a pulsed bias potential of −100 V. The microstructural variation was achieved by using two different substrate materials, MgO(001) and thermally oxidized Si(001), respectively. Subsequently, the stacks were subjected to isothermal annealing treatments at 900 °C for 1 h in high vacuum to induce the diffusion of Cu into the TiN. The performance of the TiN diffusion barrier layers was evaluated by cross-sectional transmission electron microscopy in combination with energy-dispersive X-ray spectrometry mapping and atom probe tomography. No Cu penetration was evident in the single-crystal stack up to annealing temperatures of 900 °C, due to the low density of line and planar defects in single-crystal TiN. However, at higher annealing temperatures when diffusion becomes more prominent, density-functional theory calculations predict a stoichiometry-dependent atomic diffusion mechanism of Cu in bulk TiN, with Cu diffusing on the N sublattice for the experimental N/Ti ratio. In comparison, localized diffusion of Cu along grain boundaries in the columnar polycrystalline TiN barriers was detected after the annealing treatment. The maximum observed diffusion length was approximately 30 nm, yielding a grain boundary diffusion coefficient of the order of 10{sup −16} cm{sup 2} s{sup −1} at 900 °C. This is 10 to 100 times less than for comparable underdense polycrystalline TiN coatings deposited without external substrate heating or bias potential. The combined numerical and experimental approach presented in this paper enables the contrasting juxtaposition of diffusion phenomena and mechanisms in two TiN coatings, which differ from each other only in the presence of grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Some Physical Properties of the New Intermetallic Compound NbCd{sub 2}

Solid solutions of cadmium in niobium and NbCd{sub 2} phase are formed by magnetron sputtering and coprecipitation on substrates moving relative to the flow of Nb and Cd particles. The NbCd{sub 2} phase can be described by a tetragonal unit cell with the parameters a = 0.84357 nm, c = 0.54514 nm, and c/a = 0.6426. A very high hole concentration in NbCd{sub 2} is established by studying the coating absorption and transmission spectra corresponding to the intermetallic-compound composition near the fundamental absorption edge, determining the band gap, and measuring the carrier mobility. Such a concentration is characteristic of a strongly degenerate semiconductor or metal. The band gap is determined to be 1.26 eV. The variation in the concentration of carriers and their mobility depending on the cadmium concentration in coatings of the Nb–Cd system confirms the occurrence of the NbCd{sub 2} phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature Dependent Thermal Conductivity of Si/SiC Amorphous Multilayer Films

The cross-plane thermal conductivity of 22 nm period Si/SiC amorphous multilayer films deposited by magnetron sputtering and measured using a differential 3{omega} method was found to decrease from 2.0 W/mK at 300 K to 1.1 W/mK at 80 K. Structural disorder in each of the constituent layers of the amorphous multilayer films was confirmed by high resolution transmission electron microscopy. Estimations of the relative contributions of interface and intrinsic layer thermal resistance based on microscopic phonon transport models indicate that mean free path reductions induced by the structural disorder within the multilayer films are responsible for the observed experimental trends.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of hydrogen on sputter-deposited boron carbide films

Sputter deposition of B 4 C films requires precise control over the microstructure and the nucleation and growth of nodular defects. Here, we study the properties of B 4 C films deposited with substrate holder temperatures of 250, 450, or 510 °C and different substrate tilt angles by direct-current magnetron sputtering in either pure Ar or a mixture of 4% H 2 in Ar as the working gas. Results show that the addition of H 2 reduces the impedance of the plasma discharge, resulting in larger discharge currents at constant power, which is attributed to a lower ionization potential of H 2 than Ar. More importantly, films deposited with the H 2 containing plasma exhibit lower oxygen impurity incorporation, a lower density of nodular defects, and suppressed columnar microstructure. These results demonstrate the effectiveness of such a plasma doping approach to improve the properties of B 4 C films.

Wong, M. S. [Lawrence Livermore National Laborator↗

Investigation of structure, magnetic, and transport properties of Mn-doped SiC films

Mn-doped SiC films were fabricated by radio frequency magnetron sputtering technique. The structure, composition, and magnetic and transport properties of the films were investigated. The results show the films have the 3C-SiC crystal structure and the doped Mn atoms in the form of Mn{sup 2+} ions substitute for C sites in SiC lattice. All the films are ferromagnetic at 300 K, and the ferromagnetism in films arises from the doped Mn atoms and some extended defects. In addition, the saturation magnetization increases with the Mn-doped concentration increasing. The Mn doping does not change the semiconductor characteristics of the SiC films.

36 MATERIALS SCIENCE↗

Unconventional spin-orbit torques from sputtered MoTe 2 films

Materials with strong spin-orbit coupling and low crystalline symmetry are promising for generating large unconventional spin-orbit torques (SOTs), such as in-plane fieldlike (FL) torques and out-of-plane dampinglike (DL) torques, which can effectively manipulate and deterministically switch an out-of-plane magnetization without the need for additional external in-plane magnetic fields. Here, we report SOTs generated by magnetron-sputtered 1⁢T' MoTe 2 /Permalloy (Py; Ni 80 ⁢Fe 20 )/MgO heterostructures using both spin-torque ferromagnetic resonance (ST-FMR) and second harmonic Hall measurements. We observed unconventional FL and DL torques in our samples due to spins polarized normal to the interface of MoTe 2 and Py layers, and studied the influence of crystallographic order and MoTe 2 layer thickness on the SOTs. By comparing the Raman spectra of 1⁢T' MoTe 2 samples prepared in different ways, we found a tensile strain in sputtered MoTe 2 films, which might further enhance the generation of unconventional torques by reducing the symmetry of 1⁢T' MoTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of the semiconductor-metal transition in V{sub 2}O{sub 5} thin films by the pulsed laser photoacoustic method

In this work, the pulsed photoacoustic technique was used to investigate the semiconductor-metal transition of thin vanadium pentoxide films (V{sub 2}O{sub 5}) under increasing temperature. The V{sub 2}O{sub 5} thin films were simultaneously deposited by RF magnetron sputtering at room temperature, on corning glass and SnO{sub 2}:F/glass substrates, in order to compare the photoacoustic response. The elemental and structural analysis of the V{sub 2}O{sub 5} films was performed by Rutherford backscattering spectroscopy and X-ray diffraction. The optical transmission and band gap were determined using UV-Vis spectroscopy. The electrical properties were measured using four-point probe measurements with the Van der Pauw geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sputter deposition of Ta 1 W 1 Au 1 Bi 7 films for next generation hohlraums

Hohlraum simulation predicts a higher x-ray drive from Ta 1 W 1 Au 1 Bi 7 compared with our current Au hohlraum. Here, we study the effect of deposition process parameters including deposition rate, working pressure, target-to-substrate distance, substrate bias, and substrate temperature on the microstructure of Ta1W1Au1Bi7 films deposited by direct current magnetron sputtering onto planar substrates. We found that the substrate temperature has a pronounced effect on the film microstructure. This is attributed to the Bi low melting point (271°C) causing its adatom mobility to be strongly dependent on the substrate temperature. Additionally, we observed phase separation for films deposited with a high substrate bias. These results have important implications for the development of a robust Ta 1 W 1 Au 1 Bi 7 hohlraum fabrication process.

36 MATERIALS SCIENCE↗

Effect of oxygen deficiency on the photoresponse and reactivity of mixed phase titania thin films

Nonstoichiometric mixed phased titania nanocomposites (TiO{sub 2-x}) were deposited by reactive direct current magnetron sputtering. The authors explored the role of nonstoichiometry (as defined by oxygen deficiency in synthesis) in mixed phase titania thin films and its effects on the photoresponse and photocatalytic performance for CO{sub 2} reduction to methane under UV and visible light. Oxygen partial pressure was varied during film deposition, yielding different levels of oxygen deficiency in the films. Optimized nonstoichiometric films showed a strong redshift. The authors have identified an optimum set of synthesis conditions for TiO{sub 2-x} films that produce a relative maximum in photocatalytically produced methane under both UV and visible light.

36 MATERIALS SCIENCE↗

The Element Composition Variation in Lead Zirconate Titanate upon the Ion-Plasma Deposition: Experiment and Simulation

The element composition modification is experimentally studied in PZT thin films obtained via the RF magnetron sputtering with variable working gas pressure. The experimental data were interpreted through the statistic simulation of thermalization and diffusion of sprayed Pb, Zr, and Ti atoms during the ion-plasma deposition of PZT thin films. The simulation data are shown to adequately describe (within the limits of 5%) the change in element composition at various pressures of the gas environment. The study conducted enables one to produce PZT thin films with a set element composition, which is essential for optimizing the electric and physical properties of solid solutions at the morphotropic phase boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultralow dielectric losses in pyrochlore films of the PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} system

(1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3} (PMNT) (with x=0.1) thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. A well-crystallized pyrochlore phase structure, which started to nucleate and grow at 450-500 deg. C, was formed in the PMNT thin films. These pyrochlore-structured PMNT thin films show ultralow dielectric losses with a typical loss tangent as low as 0.001, accompanied by a relatively high dielectric constant ({epsilon}{sub r}=176). Such an extremely low dielectric loss, having never been obtained in thin films of perovskite PMNT, is probably ascribed to the specific structural feature of pyrochlore phase, chemically different from its perovskite counterpart, and ascribed to the avoidance of the polar domain-related losses.

36 MATERIALS SCIENCE↗

Reconstruction mechanisms of tantalum oxide coatings with low concentrations of silver for high temperature tribological applications

Silver tantalate (AgTaO{sub 3}) coatings have been found to exhibit outstanding tribological properties at elevated temperatures. To understand the mechanisms involved in the tribological behavior of the Ag-Ta-O system, tantalum oxide coatings with a small content of silver were produced to investigate the metastable nature of this self-lubricating material. The coatings were produced by unbalanced magnetron sputtering, ball-on-disk wear tested at 750 °C, and subsequently characterized by X-ray diffraction, Scanning Auger Nanoprobe, cross-sectional Scanning Electron Microscopy, and Transmission Electron Microscopy. Complementary molecular dynamic simulations were carried out to investigate changes in the chemical and structural properties at the interface due to sliding for films with varying silver content. Both the experimental characterization and the theoretical modeling showed that silver content affects friction and wear, through the role of silver in film reconstruction during sliding. The results suggest that the relative amount of silver may be used to tune film performance for a given application.

36 MATERIALS SCIENCE↗