Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Location and propagation of shock associated noise from supersonic jets

Shock associated noise from unheated supersonic jets is investigated through acoustic measurements in both the near and far fields. The peak Helmholtz number of broadband shock noise is found to be independent of nozzle pressure ratio when based on the length of the shock cells and the ambient speed of sound. This indicates that the acoustic wavelengths generated in the shock noise process are limited in size by the shock cell spacing. Excellent agreement between power spectral densities measured at various far-field angles is obtained at and above the peak shock noise frequency when source convection effects are included. Results show a directivity of broadband shock noise pointed in the upstream direction, with omnidirectionality being approached only at high pressure ratios. The relative importance of shock noise with respect to jet mixing noise is found to be maximum near the pressure ratio at which a Mach disc begins to form in the jet. Near-field measurements point to the downstream shock cells as the region where the dominant shock noise eminates from the jet.

Norum, T. D.↗

Effects of wing and tail location on the aerodynamic characteristics of an airplane for Mach numbers from 0.25 to 4.63

An experimental investigation was conducted to determine the effect of wing vertical position and horizontal-tail vertical and axial position on the static aerodynamic characteristics of a wing-body-horizontal-tail configuration. The configurations investigated included the wing in a high, mid, or low position on the body with the horizontal tail in each of these vertical positions as well as in three axial positions. The closest position of the horizontal tail to the wing essentially provided an all-wing configuration. In addition, tests were made for the three wing positions with the horizontal tail removed. The tests were made in three different wind tunnels to provide data for a Mach number range from 0.25 to 4.63. The purpose of the investigation was to illustrate the strong effects of interference flow fields as a function of geometry and flight attitude and to provide a systematic data base that might be useful for correlation with various analytical techniques. The results indicate some arrangements that might lead to aerodynamic problems and others in which the interference flow fields might be favorably exploited. The results suggest that a coplanar concept with a translating horizontal tail could potentially minimize the aerodynamic changes with Mach number and provide more optimum performance over the Mach number range.

Spearman, M. L.↗

Evaluation of aircraft microwave data for locating zones for well stimulation and enhanced gas recovery

Imaging radar was evaluated as an adjunct to conventional petroleum exploration techniques, especially linear mapping. Linear features were mapped from several remote sensor data sources including stereo photography, enhanced LANDSAT imagery, SLAR radar imagery, enhanced SAR radar imagery, and SAR radar/LANDSAT combinations. Linear feature maps were compared with surface joint data, subsurface and geophysical data, and gas production in the Arkansas part of the Arkoma basin. The best LANDSAT enhanced product for linear detection was found to be a winter scene, band 7, uniform distribution stretch. Of the individual SAR data products, the VH (cross polarized) SAR radar mosaic provides for detection of most linears; however, none of the SAR enhancements is significantly better than the others. Radar/LANDSAT merges may provide better linear detection than a single sensor mapping mode, but because of operator variability, the results are inconclusive. Radar/LANDSAT combinations appear promising as an optimum linear mapping technique, if the advantages and disadvantages of each remote sensor are considered.

Macdonald, H.↗

Thermal mapping, geothermal source location, natural effluents and plant stress in the Mediterranean coast of Spain

Although no significant results were achieved during the report period, research continues. A sample of imagery showing thermal inertia and temperature differences over the northeastern United States and Europe was received. The project coordinator attended a TELLUS Project meeting in Ispra, Italy at which general guidelines for the future were established and the quality of the data received was discussed.

Delascuevas, R. N.↗

An algorithm for the rapid location of an extreme of a function subject only to geometric restrictions

The requirements of symmetry and convexity in the application of algorithms for the minimization or maximization of a function are discussed. It is argued that if a function of a single variable is convex and symmetric in a neighborhood of an extremum, the extremum may be approximated to the precision that increases by at least a power of two per functional evaluation. The procedure may be used to drive a complex optimization procedure in the multivariate area estimation problem encountered in remote sensing.

Terrell, G. R.↗

An empirical model of the Venusian outer environment. I - The shape of the dayside solar wind-atmosphere interface. II - The shape and location of the bow shock

Solar wind plasma and magnetic field data and ionospheric data obtained from the Pioneer Venus orbiter are discussed. The variation in the magnetic field pressure within the magnetic barrier is shown to be similar to that expected for the solar wind pressure variations along an obstacle's boundary when a more realistic approximation of the shape of the ionosphere is included. Simultaneous solar wind pressure, ionospheric pressure, and magnetic barrier pressure data reveal that the ionospheric pressure below the ionopause is approximately equal to the solar wind pressure. The magnetic barrier pressure is found to be equal to approximately 2/3 to 3/4 of both the solar wind pressure and the ionospheric pressure. Estimates of the hot plasma pressure contribution to the total pressure in the magnetic barrier vary from 1/4 to 1/3. Just below the ionopause the ionospheric pressure deviations from the mean ionospheric pressure are significant, especially below approximately 400 km; they appear to be indicative of the adjustment of the ionospheric structure to changeing solar wind conditions. A first-order model of the ionopause pressure variations as a function of height and solar-zenith angle is proposed. Venera 9 and Venera 10 bow shock crossings are then analyzed for solar zenith angles in the range from approximately 25 deg to approximately 153 deg. A comparison of Venera 9 and Venera 10 bow shock crossings with those observed by the Pioneer Venus orbiter suggests that both the secular variation and the latitudinal asymmetry may be responsible for the closer shock crossings of the Venera 9 and Venera 10 spacecraft.

Vaisberg, O. L.↗

Location of the 1979 April 6 gamma-ray burst

A gamma-ray burst was recorded on 1979 April 6 at 1140 UT by instruments on the Pioneer Venus Orbiter (PVO), Venera 11 (V11), Venera 12 (V12), Prognoz 7 (P7), and International Sun-Earth Explorer-3 (ISEE-3) spacecraft. The event consisted of a single spike of 0.2 s duration and had a spectral feature near 400 keV, thus resembling the 1979 March 5 event in two respects. However, important differences in rise time and spectral hardness make it impossible to conclude positively that the two events shared the same mechanism or had comparable energetics. Constraints placed by these findings on the energetics and types of objects that could be responsible for the April 6 and possibly the March 5 bursts are discussed.

Laros, J. G.↗

Spectrometry of Jupiter at selected locations on the disk during the 1979 apparition

Jupiter's reflectivity was measured as a function of wavelength between 3000 and 10,500 Angstrom for two nights during the 1979 apparition. The spectra obtained were used to calibrate the wavelength response of Voyager images and to establish differences from previous apparitions. The observations were taken in the prominent belts and zones and both polar caps along the central meridian using a slit of dimensions 2.33 x 2.5 sq arcsec. The equivalent widths of the 6190 and 7270 Angstrom CH4 bands were measured; compared to the 1976 apparition, there was significantly less CH4 absorption in the north tropical zone. Such equivalent-width decreases are said to result from either a reduction in particle albedo or a decrease in the scattering mean free path owing to a greater concentration of aerosol particles in the NTrZ.

Cochran, A. L.↗

A note on the location of the stagnation point in the magnetosheath flow

While observational and theoretical investigations have clearly indicated that the shape of the magnetosphere is very nearly symmetric about the plane determined by the aberrated solar wind flow direction and the earth's magnetic dipole, many processes such as magnetic pulsations and geomagnetic activity which should be shape dependent do not exhibit symmetry about this plane. The present paper proposes a solution to this apparent paradox in terms of the shifting of the stagnation point in the magnetosheath flow. It is shown that the interplanetary magnetic field can act to shift the stagnation point on the order of 15 deg from the nose towards dawn during periods of low Alfven Mach number without an appreciable aberration of the magnetopause, accounting for the observations of pulsation demarcation and magnetic reconnection.

Russell, C. T.↗

The MSS control point location error filter for LANDSAT-D

The filter produces the maximum likelihood estimates for average values of the spacecraft position and attitude errors during a single scene. The quality of the filter performance is characterized by the maximal cross and along track residual errors for which probability distributions can be calculated analytically for a given pattern of control points. The filter with an automatic selection of the best set of estimates provides geodetic correction at 90% of pixels with residual errors less than 40 m for four or more control points and the mean squared measurement errors of the order of 20-25 m. The same accuracy can be preserved for eight or more control points and measurement errors of 30-35 m.

Levine, I.↗

Thermal mapping, geothermal source location, natural effluents and plant stress in the Mediterranean coast of Spain

Data obtained by HCMM satellite over a complex area in eastern Spain were evaluated and found to be most useful in studying macrostructures in geology and in analyzing marine currents, layers, and areas (although other satellites provide more data). The upper scale to work with HCMM data appears to be 1:2.000.000. Techniques used in preprocessing, processing, and analyzing imagery are discussed as well as methods for pattern recognition. Surface temperatures obtained for soils, farmlands, forests, geological structures, and coastal waters are discussed. Suggestions are included for improvements needed to achieve better results in geographic areas similar to the study area.

Delascuevas, R. N.↗

On the location of acid-hydrolysable carbon in lunar soil fines

Soil fines exposed on the lunar surface accumulate small metallic iron particles and solar wind-derived carbon. In previous work, it has been suggested that an intimate association exists between one particular carbon phase, hydrolysable carbon, and very fine iron droplets, where the carbon is in solid solution in the iron. The earlier hypothesis of a constant carbon in iron concentration across a broad range of droplet sizes is testable by combining hydrolysable carbon determinations with a variety of magnetic measurements sensitive to different droplet diameters. New measurements of ferromagnetic resonance response on density and magnetic separates from size fractions of soil 12023 are interpreted as evidence that hydrolysable carbon is preferentially associated with the larger, magnetically stable single-domain iron particles rather than with the smaller superparamagnetic droplets. For the former, there is a quite uniform ratio of iron to carbon both within a series of separates from a single soil, and among soils of widely varying FeO content.

Fallick, A. E.↗

On the adequacy of the fixed locations of the surface-based international network for inferring interannual ozone variability

The influence of the geographical distribution and the number of the surface stations in the ozone detecting network on changes in global ozone inferred from the surface measurements is investigated by comparison with information obtained from satellite backscattered UV observations on the Nimbus 4 with nearly complete global coverage for the period 1970-1972. Results show that the geographical distribution of the stations does not properly represent different latitudes. While the number of stations in the north temperate zone appears adequate to represent monthly ozone averages to within 0.5% except during the early phase of the Northern Hemisphere spring maximum, the resultant error in the derived change in north temperature zone ozone between 1970-1972 is 0.5%. In the tropical and south temperate zones the smaller number of stations reduces precision, and the ozone averages for use in deriving seasonal variability and trends are uncertain by about 1%. However, in the south temperature zone, the average from the sample may differ as much as 5% in some months from the averages derived from the full set. It is concluded that the resulting uncertainty in the global averages is comparable in size to typical yearly changes.

Heath, D. F.↗

Dielectric Scanning Locates Voids in Glass Foam

Capacitive probes succeed where X-ray and ultrasonic equipment do not. Crossbar switching of pairs of conductors enables detection of dielectric inhomogeneities in selected small volume elements of slab of material. Large void in sample detected as low capacitance reading for volume element containing void. Applicable in nondestructive testing of other dielectric objects for internal defects that exhibit dielectric inhomogeneities.

Gammell, P. M.↗

Hole-Center Locating Tool

Tool alines center of new hold with existing hole. Tool marks center of new hole drilled while workpiece is in place. Secured with bolts while hole center marked with punch. Used for field installations where reference points unavailable or work area cramped and not easily accessible with conventional tools.

Senter, H. F.↗