Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linearization error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Numerical discreteness errors in multispecies cosmological N -body simulations

ABSTRACT We present a detailed analysis of numerical discreteness errors in two-species, gravity-only, cosmological simulations using the density power spectrum as a diagnostic probe. In a simple set-up where both species are initialized with the same total matter transfer function, biased growth of power forms on small scales when the solver force resolution is finer than the mean interparticle separation. The artificial bias is more severe when individual density and velocity transfer functions are applied. In particular, significant large-scale offsets in power are measured between simulations with conventional offset grid initial conditions when compared against converged high-resolution results where the force resolution scale is matched to the interparticle separation. These offsets persist even when the cosmology is chosen so that the two particle species have the same mass, indicating that the error is sourced from discreteness in the total matter field as opposed to unequal particle mass. We further investigate two mitigation strategies to address discreteness errors: the frozen potential method and softened interspecies short-range forces. The former evolves particles under the approximately ‘frozen’ total matter potential in linear theory at early times, while the latter filters cross-species gravitational interactions on small scales in low-density regions. By modelling closer to the continuum limit, both mitigation strategies demonstrate considerable reductions in large-scale power spectrum offsets.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulating plasma wave propagation on a superconducting quantum chip

Quantum computers may one day enable the efficient simulation of strongly coupled plasmas that lie beyond the reach of classical computation in regimes where quantum effects are important and the scale separation is large. Here, in this article, we take a first step toward efficient simulation of quantum plasmas by demonstrating linear plasma wave propagation on a superconducting quantum chip. Using high-fidelity and highly expressive device-native gates, combined with an error-mitigation technique, we simulate the scattering of laser pulses from inhomogeneous plasmas. Our approach is made feasible by the identification of a suitable local spin model whose excitations mimic plasma waves, and whose circuit implementation requires a lower gate count than other proposed approaches that would require a future fault-tolerant quantum computer. This work opens avenues to study more complicated phenomena that cannot be simulated efficiently on classical computers, such as nonlinear quantum dynamics when strongly coupled plasmas are driven out of equilibrium.

general physics↗

Measurement of the decay B{sup 0}{yields}{pi}{sup -}l{sup +}{nu} and determination of |V{sub ub}|

We present a measurement of the charmless semileptonic decay B{sup 0}{yields}{pi}{sup -}l{sup +}{nu} using a data sample containing 657x10{sup 6} BB events collected with the Belle detector at the KEKB asymmetric-energy e{sup +}e{sup -} collider operating near the {Upsilon}(4S) resonance. We determine the total branching fraction of the decay, B(B{sup 0}{yields}{pi}{sup -}l{sup +}{nu})=(1.49{+-}0.04(stat){+-}0.07(syst))x10{sup -4}. We also report a new precise measurement of the differential decay rate and extract the Cabibbo-Kobayashi-Maskawa matrix element |V{sub ub}| using model-independent and model-dependent approaches. From a simultaneous fit to the measured differential decay rate and lattice QCD results, we obtain |V{sub ub}|=(3.43{+-}0.33)x10{sup -3}, where the error includes both experimental and theoretical uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Factorization Breaking in High-Transverse-Momentum Charged-Hadron Production at the Tevatron?

We compare the transverse-momentum (p{sub T}) distribution of inclusive light-charged-particle production measured by the CDF Collaboration at the Fermilab Tevatron with the theoretical prediction evaluated at next-to-leading order in quantum chromodynamics using fragmentation functions recently determined through a global data fit. While in the lower p{sub T} range the data agree with the prediction within the theoretical error or slightly undershoot it, they significantly exceed it in the upper p{sub T} range, by several orders of magnitude at the largest values of p{sub T}, potentially challenging the factorization theorem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Robust Stabilization of Inverter-Based Resources Using Virtual Resistance-Based Control

This letter proposes a virtual resistance-based nonlinear control to stabilize and robustify the current layer of inverter-based resources, subject to the grid voltage disturbances, and the grid parameter uncertainties. A class of virtual resistances is proposed and analyzed using concepts from dissipative systems theory. Moreover, specific nonlinear virtual resistance-based controllers are derived, with their corresponding performance analytically bounded. Here, the theoretical and simulation results show that the proposed nonlinear virtual resistance-based controllers significantly reduce the L 2 gain of the closed-loop error system to grid voltage variation and parametric uncertainties. Significant improvements of the transient and steady-state current responses are also demonstrated over linear virtual resistance counterparts.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A robust real-time surface reconstruction method on point clouds captured from a 3D surface photogrammetry system

Purpose: To develop a robust and real-time surface reconstruction method on point clouds captured from a 3D surface photogrammetry system. Methods: The authors have developed a robust and fast surface reconstruction method on point clouds acquired by the photogrammetry system, without explicitly solving the partial differential equation required by a typical variational approach. Taking advantage of the overcomplete nature of the acquired point clouds, their method solves and propagates a sparse linear relationship from the point cloud manifold to the surface manifold, assuming both manifolds share similar local geometry. With relatively consistent point cloud acquisitions, the authors propose a sparse regression (SR) model to directly approximate the target point cloud as a sparse linear combination from the training set, assuming that the point correspondences built by the iterative closest point (ICP) is reasonably accurate and have residual errors following a Gaussian distribution. To accommodate changing noise levels and/or presence of inconsistent occlusions during the acquisition, the authors further propose a modified sparse regression (MSR) model to model the potentially large and sparse error built by ICP with a Laplacian prior. The authors evaluated the proposed method on both clinical point clouds acquired under consistent acquisition conditions and on point clouds with inconsistent occlusions. The authors quantitatively evaluated the reconstruction performance with respect to root-mean-squared-error, by comparing its reconstruction results against that from the variational method. Results: On clinical point clouds, both the SR and MSR models have achieved sub-millimeter reconstruction accuracy and reduced the reconstruction time by two orders of magnitude to a subsecond reconstruction time. On point clouds with inconsistent occlusions, the MSR model has demonstrated its advantage in achieving consistent and robust performance despite the introduced occlusions. Conclusions: The authors have developed a fast and robust surface reconstruction method on point clouds captured from a 3D surface photogrammetry system, with demonstrated sub-millimeter reconstruction accuracy and subsecond reconstruction time. It is suitable for real-time motion tracking in radiotherapy, with clear surface structures for better quantifications.

60 APPLIED LIFE SCIENCES↗

A General Method for Estimating Bulk 2D Projections of Ice Particle Shape: Theory and Applications

The orientation of falling ice particles directly influences estimates of microphysical and radiative bulk quantities as well as in situ retrievals of size, shape, and mass. However, retrieval efforts and bulk calculations often incorporate very basic orientations or ignore these effects altogether. To address this deficiency, this study develops a general method for projecting bulk distributions of particle shape for arbitrary orientations. The Amoroso distribution provides the most general bulk aspect ratio distribution for gamma-distributed particle axis lengths. The parameters that govern the behavior of this aspect ratio distribution depend on the assumed relationship between mass, maximum dimension, and aspect ratio. Individual spheroidal geometry allows for eccentricity quantities to linearly map onto ellipse analogs, whereas aspect ratio quantities map nonlinearly. For particles viewed from their side, this analytic distinction leads to substantially larger errors in projected aspect ratio than for projected eccentricity. Distribution transformations using these mapping equations and numerical integration of projection kernels show that both truncation of size distributions and changes in Gaussian dispersion can alter the modality and shape of projection distributions. As a result, the projection process can more than triple the relative entropy between the spheroidal and projection distributions for commonly assumed model and orientation parameters. This shape uncertainty is maximized for distributions of highly eccentric particles and for particles like aggregates that are thought to fall with large canting-angle deviations. As a result, the methods used to report projected aspect ratios and the corresponding values should be questioned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A convergence analysis of stochastic collocation method for Navier-Stokes equations with random input data

Stochastic collocation method has proved to be an efficient method and been widely applied to solve various partial differential equations with random input data, including Navier- Stokes equations. However, up to now, rigorous convergence analyses are limited to linear elliptic and parabolic equations; its performance for Navier-Stokes equations was demonstrated mostly by numerical experiments. In this paper, we provide an error analysis of stochastic collocation method for a semi-implicit Backward Euler discretization for NSE and prove the exponential decay of the interpolation error in the probability space. Our analysis indicates that due to the nonlinearity, as final time T increases and NSE solvers pile up, the accuracy may be reduced significantly. Subsequently, the theoretical results are illustrated by the numerical test of time dependent fluid flow around a bluff body.

97 MATHEMATICS AND COMPUTING↗

Adaptive Control for Load-Following of Boiling Water Reactors Part I: Linear Systems and Fully-Observable Dynamics

Automation control is a key strategy to improve the economic competitiveness of nuclear power plants. Not only does it help reduce operational costs, but it also extends the value proposition of these plants to nontraditional markets, including unattended operations in remote villages and space. However, the dynamics of the operating environments of nuclear reactors are subject to changes over time, and there are no widely adopted methods to ensure that the automation strategy will remain effective over the extended durations required for these applications. Adaptive control is a discipline that offers the possibility to accommodate such changes online. However, it relies on mathematical assumptions that must be respected to ensure robustness and reliability. In this work, we derive an adaptive control formulation for linear systems in which all states are observable and apply it to an instance of load-follow operation for Boiling Water Reactors. We assumed uncertainty in two factors: the temperature coefficient and the control rod worth, both of which are affected over time by the evolution of the nuclear reactor core environment. With an arbitrary penalty factor of 5, we found that the mean absolute and integral time absolute errors can be reduced by more than 90%, underscoring the strength of adaptive control. To extend the application to more challenges, different uncertainties and load-follow trajectories, as well as new formulations that include non-linearity and partial observability, are currently being developed.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Final Report - Summer Visit 2010

During my visit to LLNL during the summer of 2010, I worked on algebraic multilevel solvers for large sparse systems of linear equations arising from discretizations of partial differential equations. The particular solver of interest is based on ILU decomposition. The setup phase for this AMG solve is just the single ILU decomposition, and its corresponding error matrix. Because the ILU uses a minimum degree or similar sparse matrix ordering, most of the fill-in, and hence most of the error, is concentrated in the lower right corner of the factored matrix. All of the major multigrid components - the smoother, the coarse level correction matrices, and the fine-to-coarse and coarse-to-fine rectangular transfer matrices, are defined in terms of various blocks of the ILU factorization. Although such a strategy is not likely to be optimal in terms of convergence properties, it has a relatively low setup cost, and therefore is useful in situations where setup costs for more traditional AMG approaches cannot be amortized over the solution of many linear systems using the same matrix. Such a situation arises in adaptive methods, where often just one linear system is solved at each step of an adaptive feedback loop, or in solving nonlinear equations by approximate Newton methods, where the approximate Jacobian might change substantially from iteration to iteration. In general terms, coarse levels are defined in terms of successively smaller lower right blocks of the matrix, typically decreasing geometrically in order. The most difficult issue was the coarse grid correction matrix. The preconditioner/smoother for a given level is just the corresponding lower right blocks of the ILU factorization. The coarse level matrix itself is just the Schur complement; this matrix is not known exactly using just the ILU decomposition in the setup phase. Thus we approximate this matrix using various combinations of the preconditioning matrix and the error matrix. During my visit, several approximations of this type were implemented and tested. While some improved the convergence rate of the overall method, these gains had to be balanced against the additional costs involved in creating and applying these matrices. By this more stringent criterion, none of the improved approximations could be characterized as an unqualified success.

97 MATHEMATICS AND COMPUTING↗

Dynamic Modeling, Trajectory Optimization, and Linear Control of Cable-Driven Parallel Robots for Automated Panelized Building Retrofits

The construction industry faces a growing need for automation to reduce costs, improve accuracy and productivity, and address labor shortages. One area that stands to benefit significantly from automation is panelized prefabricated building envelope retrofits, which can improve a building’s energy efficiency in heating and cooling interior spaces. In this paper, we propose using cable-driven parallel robots (CDPRs), which can effectively lift and handle large objects, to install these panels. However, implementing CDPRs presents significant challenges because of their nonlinear dynamics, complex trajectory planning, and precise control requirements. To tackle these challenges, this work focuses on a new application of established control and trajectory optimization theories in a CDPR simulation of a building envelope retrofit under real-world conditions. We first model the dynamics of CDPRs, highlighting the critical role of damping in system behavior. Building on this dynamic model, we formulate a trajectory optimization problem to generate feasible and efficient motion plans for the robot under operational and environmental constraints. Given the high precision required in the construction industry, accurately tracking the optimized trajectory is essential. However, challenges such as partial observability and external vibrations complicate this task. To address these issues, a Linear Quadratic Gaussian control framework is applied, enabling the robot to track the optimized trajectories with precision. Simulation results show that the proposed controller enables precise end effector positioning with errors under 4 mm, even in the presence of external wind disturbances. Through comprehensive simulations, our approach allows for an in-depth exploration of the system’s nonlinear dynamics, trajectory optimization, and control strategies under controlled yet highly realistic conditions. The results demonstrate the feasibility of CDPRs for automating panel installation and provide insights into their practical deployment.

CDPR↗

Error mitigation with Clifford quantum-circuit data

Achieving near-term quantum observables despite significant hardware noise. For this purpose, we propose a novel, scalable error-mitigation method that applies to gate-based quantum computers. The method generates training data { X i noisy , X i exact } via quantum circuits composed largely of Clifford gates, which can be efficiently simulated classically, where X i noisy and X i exact are noisy and noiseless observables respectively. Fitting a linear ansatz to this data then allows for the prediction of noise-free observables for arbitrary circuits. We analyze the performance of our method versus the number of qubits, circuit depth, and number of non-Clifford gates. Here, we obtain an order-of-magnitude error reduction for a ground-state energy problem on 16 qubits in an IBMQ quantum computer and on a 64-qubit noisy simulator.

97 MATHEMATICS AND COMPUTING↗

Errors in reconstruction of dichroic X-ray orientation tomography due to polarization rotation of the incident beam

Dichroic X-ray tomography is a technique in which the crystal orientation or magnetization of a sample is resolved in three dimensions. The best-known uses of this technique are for observation of magnetic moments via circular dichroism, using left- and right-handed circularly polarized X-ray beams. Another variant uses linear dichroism to resolve the crystal orientation. In both these techniques, it is assumed that the absorption of X-rays along a path inside a material can be computed as a line integral of a local absorption coefficient along the ray path. For linear dichroism, this assumption is inaccurate because the polarization of the beam changes along the propagation direction when the optic axis of the material is not aligned along the polarization. In this work, a finite-element Maxwell solver is used to simulate tomography and reconstructions. The propagation effect can lead to significant errors in the reconstructed orientations. These errors may be mitigated by taking data at additional angles or by operating at energies at which the dichroism is weak. An iterative approach is proposed which may allow accurate reconstruction with fewer data than would otherwise be required.

X-ray linear dichroism↗

Coupling Measurements in ATF2 Extraction Line

The purpose of ATF2 is to deliver a beam with stable very small spotsizes as required for future linear colliders such as ILC or CLIC. To achieve that, precise controls of aberrations such as dispersion and coupling are necessary. Theoretically, the complete reconstruction of the beam matrix is possible from the measurements of horizontal, vertical and tilted beam sizes, combining skew quadrupole scans at several wire-scanner positions. Such measurements were performed in the extraction line (EXT) of ATF2 in May 2009. We present analysis results attempting to resolve the 4 x 4 beam matrix. We aimed to reconstruct the full beam matrix using only skew quadrupole scans at different EXT wire-scanner locations, with measurements of horizontal, vertical and two tilted beam size projections. Checking the coherence of the {sigma}{sub 13} reconstruction from the {sigma}{sub 80{sup o}} and the {sigma}{sub 100{sup o}} measurements was essential to perform this analysis. We have shown that reconstruction of the coupling element can not be performed independantly of the 4 x 4 diagonal ones since it leads to unphysical results. A more accurate and automatisable method was find, leading to physical beam matrix reconstruction, compatible with the measurements. Another analysis should be performed based on a larger number of data sets to minimise statistical errors.

43 PARTICLE ACCELERATORS↗

Pyrrole‐Imine Macrocycle: Self‐Organizing Cross‐Reactive Anion Receptor and Sensor

Self-organizing macrocyclic receptor-sensors for phosphorus oxyanions, phosphates, and phosphonates comprising imine moieties were prepared by condensation of dipyrrolylmethane dicarbaldehyde with diethylene triamine. The incorporation of flexible ethylene moieties endows the macrocycle with unprecedented flexibility and ability to accommodate numerous phosphorus oxyanions from orthophosphate to large anions such as ATP or phosphonate glyphosate. The anion binding was elucidated by NMR titrations, low-temperature NMR, and NOESY NMR. The incorporation of dansyl fluorophore enables sensing of anions using the fluorescence signal, whereas the changes in fluorescence intensity, width of the fluorescence band, and position of the maxima are analyte-specific and useful in recognition and identification of eleven different P-oxyanions in water. The affinity (K assoc ) for Na + salts was H 2 PO 4 − ≈ Methylphosphonate > H 2 P 2 O 7 2− > Phenylphosphonate- > Glyphosate 2− > AMP 2− > ADP 2− > ATP 2− . Interestingly, phosphonates, including methylphosphonate and glyphosate anions, were also found to display a strong affinity (K assoc ∼10 6 M −1 ) while halides, nitrate, carbonates, or hydrogen sulfate did not show a significant affinity. The determined fluorescence spectral parameters were used to classify the 12 analytes (11 anions and water) using Linear Discriminant Analysis (LDA). Quantification was performed using LDA and Support Vector Machine (SVM), and the phosphonate concentrations in unknown samples were determined with an error of 3.5% or lower.

anions↗

Achieving High-Resolution Hard X-ray Microscopy using Monolithic 2D Multilayer Laue Lenses

This article introduces the 2D multilayer Laue lens (MLL) nanofocusing optics recently developed for high-resolution hard X-ray microscopy. The new optics utilized a micro-electro-mechanical-system (MEMS)-based template to accommodate two linear MLL optics in a pre-aligned configuration. Angular misalignment between the two lenses was controlled in tens of millidegrees, and the lateral position error was on a micrometer scale. Using the developed 2D MLLs, an astigmatism-free point focus of approximately 14 nm by 13 nm in horizontal and vertical directions, respectively, at 13.6 keV photon energy was obtained. In conclusion, the success of 2D MLL optics with an approaching 10 nm resolution is a significant step forward for the development of high-resolution hard X-ray microscopy and applications of MLL optics in the hard X-ray community.

36 MATERIALS SCIENCE↗

Scaling relationships and theory for vibrational frequencies of adsorbates on transition metal surfaces

Adsorbate vibrational excitations are an important fingerprint of molecule/surface interactions, affecting temperature contributions to the free energy and impacting reaction rate and equilibrium constants. Furthermore, vibrational spectra aid in identifying species and adsorption sites present in experimental studies. Despite their importance, knowledge of how adsorbate frequencies scale across materials is lacking. Here, by combining previously reported experimental data and our own density-functional theory calculations, we reveal linear correlations between vibrational frequencies of adsorbates on transition metal surfaces. Through effective-medium theory, linear muffin-tin orbital theory, and the d-band model, we rationalize the squares of the frequencies to be fundamentally linear in their scaling across transition metal surfaces. We identify the adsorbate-binding energy as a descriptor for certain molecular vibrations and rigorously relate errors in frequencies to errors in adsorption energies. Here, we also discuss the impact of scaling on surface thermochemistry and adsorbate coverage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of a compact hard x-ray split-delay system based on variable-gap channelcut crystals

Free Electron Lasers provide unique opportunities in investigating ultrafast atomic-scale dynamics using X-ray Pump X-ray Probe and two-pulse X-ray Speckle Visibility Spectroscopy techniques. However the performance of these techniques critically relies on maintaining the spatial overlap between the two beams at the sample location while adjusting the temporal separation between the two pulses. This presents major challenges for realizing hard X-ray split-delay optics, i.e an optical arrangement capable of generating two X-ray pulses separated in time from a single X-ray pulse. More specifically, it translates into nanoradian-scale angular precision requirements. We present here a hard X-ray split-delay optics concept using 4 channelcut crystals, where the beam path length difference can be adjusted by the linear translation of two crystals having non-parallel gaps. Having two Bragg reflections from the same monolithic crystal in the opposite direction cancels positioning errors from underlying stages. As a result, this concept has lower motion precision requirements on the hardware, and yet leads to significantly higher output beam angular stability. We present a case study for this concept that covers an energy range from 7 to 12 keV and provides a delay range from -3 to 10 ps at 9 keV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗