Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Kinematics and dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The COMBS Survey – III. The chemodynamical origins of metal-poor bulge stars

The characteristics of the stellar populations in the Galactic bulge inform and constrain the Milky Way’s formation and evolution. The metal-poor population is particularly important in light of cosmological simulations, which predict that some of the oldest stars in the Galaxy now reside in its centre. The metal-poor bulge appears to consist of multiple stellar populations that require dynamical analyses to disentangle. In this work, we undertake a detailed chemodynamical study of the metal-poor stars in the inner Galaxy. Using R ~ 20000 VLT/GIRAFFE spectra of 319 metal-poor (-2.55 dex ≤ [Fe/H] ≤ 0.83 dex, with $\overline{[Fe/H]}$ = -0.84 dex) stars, we perform stellar parameter analysis and report 12 elemental abundances (C, Na, Mg, Al, Si, Ca, Sc, Ti, Cr, Mn, Zn, Ba, and Ce) with precisions of ≈0.10 dex. Based on kinematic and spatial properties, we categorize the stars into four groups, associated with the following Galactic structures: the inner bulge, the outer bulge, the halo, and the disc. We find evidence that the inner and outer bulge population is more chemically complex (i.e. higher chemical dimensionality and less correlated abundances) than the halo population. This result suggests that the older bulge population was enriched by a larger diversity of nucleosynthetic events. We also find one inner bulge star with a [Ca/Mg] ratio consistent with theoretical pair-instability supernova yields and two stars that have chemistry consistent with globular cluster stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Substructure at High Speed. I. Inferring the Escape Velocity in the Presence of Kinematic Substructure

Abstract The local escape velocity provides valuable inputs to the mass profile of the galaxy, and requires understanding the tail of the stellar speed distribution. Following Leonard & Tremaine, various works have since modeled the tail of the stellar speed distribution as ∝ ( v esc − v ) k , where v esc is the escape velocity, and k is the slope of the distribution. In such studies, however, these two parameters were found to be largely degenerate and often a narrow prior is imposed on k in order to constrain v esc . Furthermore, the validity of the power-law form can breakdown in the presence of multiple kinematic substructures or other mis-modeled features in the data. In this paper, we introduce a strategy that for the first time takes into account the presence of kinematic substructure. We model the tail of the velocity distribution as a sum of multiple power laws as a way of introducing a more flexible fitting framework. Using mock data and data from FIRE simulations of Milky Way-like galaxies, we show the robustness of this method in the presence of kinematic structure that is similar to the recently discovered Gaia Sausage. In a companion paper, we present the new measurement of the escape velocity and subsequently the mass of the Milky Way using Gaia eDR3 data.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2013

Alabama Ground Operations during the Deep Convective Clouds and Chemistry Experiment

The Deep Convective Clouds and Chemistry (DC3) field campaign investigates the impact of deep, midlatitude convective clouds, including their dynamical, physical and lighting processes, on upper tropospheric composition and chemistry. DC3 science operations took place from 14 May to 30 June 2012. The DC3 field campaign utilized instrumented aircraft and ground ]based observations. The NCAR Gulfstream ]V (GV) observed a variety of gas ]phase species, radiation and cloud particle characteristics in the high ]altitude outflow of storms while the NASA DC ]8 characterized the convective inflow. Groundbased radar networks were used to document the kinematic and microphysical characteristics of storms. In order to study the impact of lightning on convective outflow composition, VHF ]based lightning mapping arrays (LMAs) provided detailed three ]dimensional measurements of flashes. Mobile soundings were utilized to characterize the meteorological environment of the convection. Radar, sounding and lightning observations were also used in real ]time to provide forecasting and mission guidance to the aircraft operations. Combined aircraft and ground ]based observations were conducted at three locations, 1) northeastern Colorado, 2) Oklahoma/Texas and 3) northern Alabama, to study different modes of deep convection in a variety of meteorological and chemical environments. The objective of this paper is to summarize the Alabama ground operations and provide a preliminary assessment of the ground ]based observations collected over northern Alabama during DC3. The multi ] Doppler, dual ]polarization radar network consisted of the UAHuntsville Advanced Radar for Meteorological and Operational Research (ARMOR), the UAHuntsville Mobile Alabama X ]band (MAX) radar and the Hytop (KHTX) Weather Surveillance Radar 88 Doppler (WSR ]88D). Lightning frequency and structure were observed in near real ]time by the NASA MSFC Northern Alabama LMA (NALMA). Pre ]storm and inflow proximity soundings were obtained with the UAHuntsville mobile sounding unit and the Redstone Arsenal (QAG) morning sounding.

Carey, Lawrence↗
DOE OSTI2022

Microphysical Piggybacking in the Weather Research and Forecasting Model

Abstract This paper presents incorporation of the microphysical piggybacking into the Weather Research and Forecasting (WRF) model. Microphysical piggybacking is to run a single simulation applying two microphysical schemes, the first scheme driving the simulation and the second piggybacking this simulated flow. “Driving the simulation” means that the simulated microphysical processes, affect the cloud buoyancy and thus force the simulated flow. In contrast, the piggybacking variables are advected by the simulated flow and undergo microphysical transformation, but they do not affect the simulated flow (like in prescribed flow—kinematic—simulations). The two sets of variables (driver and piggybacker) include temperature, water vapor mixing ratio, and all microphysical variables. We provide details of implementing piggybacking into the WRF model, illustrate its applications, and demonstrate the benefits of this methodology in two idealized three‐dimensional cases: (a) a squall line case applying two microphysics schemes, the Thompson bulk microphysics scheme and the University of Pécs/NCAR bin (UPNB) scheme. The piggybacking simulations revealed that the microphysics‐dynamics interaction plays a more important role than the pure microphysical size sorting effect in the transition zone formation. (b) A case of daytime shallow‐to‐deep convective development over land. This case uses the UPNB scheme and contrasts convection developing in environments with either pristine or polluted cloud condensation nuclei (CCN). The piggybacking results indicated that the increase of cloud cover and decrease of supersaturation are mainly associated with the microphysical effect of increasing CCN while the change of precipitation on the ground is also influenced by microphysics‐dynamics interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Exploring the origin of the distance bimodality of stars in the periphery of the Small Magellanic Cloud with APOGEE and Gaia

ABSTRACT The Magellanic Cloud system represents a unique laboratory for study of both interacting dwarf galaxies and the ongoing process of the formation of the Milky Way and its halo. We focus on one aspect of this complex, three-body interaction – the dynamical perturbation of the Small Magellanic Cloud (SMC) by the Large Magellanic Cloud (LMC), and specifically potential tidal effects on the SMC’s eastern side. Using Gaia astrometry and the precise radial velocities (RVs) and multielement chemical abundances from Apache Point Observatory Galactic Evolution Experiment (APOGEE-2) Data Release 17, we explore the well-known distance bimodality on the eastern side of the SMC. Through estimated stellar distances, proper motions, and RVs, we characterize the kinematics of the two populations in the bimodality and compare their properties with those of SMC populations elsewhere. Moreover, while all regions explored by APOGEE seem to show a single chemical enrichment history, the metallicity distribution function (MDF), of the ‘far’ stars on the eastern periphery of the SMC is found to resemble that for the more metal-poor fields of the western periphery, whereas the MDF for the ‘near’ stars on the eastern periphery resembles that for stars in the SMC Centre. The closer eastern periphery stars also show RVs (corrected for SMC rotation and bulk motion) that are, on average, approaching us relative to all other SMC populations sampled. We interpret these trends as evidence that the near stars on the eastern side of the SMC represent material pulled out of the central SMC as part of its tidal interaction with the LMC.

Almeida, Andres (ORCID:0009000007332479)↗
DOE OSTI2020

Simulating coupled surface–subsurface flows with ParFlow v3.5.0: capabilities, applications, and ongoing development of an open-source, massively parallel, integrated hydrologic model

Surface flow and subsurface flow constitute a naturally linked hydrologic continuum that has not traditionally been simulated in an integrated fashion. Recognizing the interactions between these systems has encouraged the development of integrated hydrologic models (IHMs) capable of treating surface and subsurface systems as a single integrated resource. IHMs are dynamically evolving with improvements in technology, and the extent of their current capabilities are often only known to the developers and not general users. This article provides an overview of the core functionality, capability, applications, and ongoing development of one open-source IHM, ParFlow. ParFlow is a parallel, integrated, hydrologic model that simulates surface and subsurface flows. ParFlow solves the Richards equation for three-dimensional variably saturated groundwater flow and the two-dimensional kinematic wave approximation of the shallow water equations for overland flow. The model employs a conservative centered finite-difference scheme and a conservative finite-volume method for subsurface flow and transport, respectively. ParFlow uses multigrid-preconditioned Krylov and Newton–Krylov methods to solve the linear and nonlinear systems within each time step of the flow simulations. The code has demonstrated very efficient parallel solution capabilities. ParFlow has been coupled to geochemical reaction, land surface (e.g., the Common Land Model), and atmospheric models to study the interactions among the subsurface, land surface, and atmosphere systems across different spatial scales. This overview focuses on the current capabilities of the code, the core simulation engine, and the primary couplings of the subsurface model to other codes, taking a high-level perspective.

58 GEOSCIENCES↗
DOE OSTI2025

The Dark Matter Content of Milky Way Dwarf Spheroidal Galaxies: Draco, Sextans, and Ursa Minor

The Milky Way Survey of the Dark Energy Spectroscopic Instrument (DESI) has so far observed three classical dwarf spheroidal galaxies (dSphs): Draco, Sextans, and Ursa Minor. Based on the observed line-of-sight velocities and metallicities of their member stars, we apply the axisymmetric Jeans Anisotropic Multi-Gaussian Expansion modeling (JAM) approach to recover their inner dark matter distributions. In particular, both the traditional single-population Jeans model and the multiple population chemodynamical model are adopted. With the chemodynamical model, we divide member stars of each dSph into metal-rich and metal-poor populations. The metal-rich populations are more centrally concentrated and dynamically colder, featuring lower velocity dispersion profiles than the metal-poor populations. We find a diversity of the inner density slopes γ of dark matter halos, with the best constraints by the single-population or chemodynamical models consistent with each other. The inner density slopes are $0.7{1}_{-0.35}^{+0.34}$, $0.2{6}_{-0.12}^{+0.22}$, and $0.3{3}_{-0.16}^{+0.20}$ for Draco, Sextans, and Ursa Minor, respectively. We also present the measured astrophysical J and D factors of the three dSphs. Our results indicate that the study of the dark matter content of dSphs through stellar kinematics is still subject to uncertainties behind both the methodology and the observed data, through comparisons with previous measurements and datasets.

Dark matter↗
NASA NTRS1991

On the velocity fields of elliptical galaxies

A family of self-consistent maximum entropy dynamical models is presented for the triaxial 'perfect ellipsoids'. These models are projected in different viewing geometries to explore the possible morphologies of the 2D radial-velocity fields of elliptical galaxies. It is found that, typically, about half the time an 'ordinary' velocity field is seen with a mixture of major- and minor-axis rotation. For other lines of sight, the velocity fields are more complicated, showing multiple peaks, steep gradients, strongly twisted contours, or kinematically distinct or counter-rotating cores. The origin of each of these velocity field morphologies is explained in terms of competing contributions from the major families of tube orbits.

Statler, Thomas S.↗
NASA NTRS1993

The generation of magnetic fields by the polarization electric field in the ionosphere of Venus

Measurements by the magnetometer on the Pioneer Venus orbiter have established that during conditions of low solar wind dynamic pressure, large-scale magnetic fields are not present in the ionosphere of Venus but that during conditions of high solar wind dynamic pressure the ionosphere of Venus is magnetized. The source of the magnetic field is thought to be currents induced in the ionosphere by the solar wind. We will show that ionospheric polarization electric field can act as a source, or 'battery', producing a small magnetic field, even without any initial magnetic field. We have calculated this polarization source as a function of altitude and solar zenith angle. The magnetic field was then determined using a 2D kinematic dynamo model of the ionosphere of Venus. The magnetic field attains a maximum strength of about 5 nT at a solar zenith angle of about 120 deg. This magnetic field might act as a 'seed' field for magnetic flux ropes and terminator waves.

Shinagawa, H.↗
NASA NTRS1988

The nature of the interior of Uranus based on studies of planetary ices at high dynamic pressure

Data from the Voyager II spacecraft showed that Uranus has a large magnetic field with geometry similar to an offset tilted dipole. To interpret the origin of the magnetic field, measurements were made of electrical conductivity and equation-of-state data of the planetary 'ices' ammonia, methane, and 'synthetic Uranus' at shock pressures and temperatures up to 75 gigapascals and 5000 K. These pressures and temperatures correspond to conditions at the depths at which the surface magnetic field is generated. Above 40 gigapascals the conductivities of synthetic Uranus, water, and ammonia plateau at about 20/(ohm-cm), providing an upper limit for the electrical conductivity used in kinematic or dynamo calculations. The nature of materials at the extreme conditions in the interior is discussed.

Nellis, W. J.↗
NASA NTRS1976

Roller bearing geometry design

A theory of kinematic stabilization of rolling cylinders is extended and applied to the design of cylindrical roller bearings. The kinematic stabilization mechanism puts a reverse skew into the rolling elements by changing the roller taper. Twelve basic bearing modification designs are identified amd modeled. Four have single transverse convex curvature in their rollers while eight have rollers which have compound transverse curvature made up of a central cylindrical band surrounded by symmetric bands with slope and transverse curvature. The bearing designs are modeled for restoring torque per unit axial displacement, contact stress capacity, and contact area including dynamic loading, misalignment sensitivity and roller proportion. Design programs are available which size the single transverse curvature roller designs for a series of roller slopes and load separations and which design the compound roller bearings for a series of slopes and transverse radii of curvature. The compound rollers are proportioned to have equal contact stresses and minimum size. Design examples are also given.

Savage, M.↗
NASA NTRS1988

Position and force control of coordinated multiple arms

A technique is presented for controlling multiple manipulators which are holding a single object and therefore form a closed kinematic chain. The object, which may or may not be in contact with a rigid environment, is assumed to be held rigidly by n robot end-effectors. The derivation is based on setting up constraint equations which reduce the 6 x n degrees of freedom of n manipulators each having six joints. Additional constraint equations are considered when one or more degrees of freedom of the object are reduced due to external constraints. Utilizing the operational space dynamic equations, a decoupling controller is designed to control both the position and the interaction forces of the object with the environment. Simulation results for the control of a pair of two-link manipulators are presented.

Hayati, Samad A.↗
NASA NTRS1989

A variational approach to dynamics of flexible multibody systems

This paper presents a variational formulation of constrained dynamics of flexible multibody systems, using a vector-variational calculus approach. Body reference frames are used to define global position and orientation of individual bodies in the system, located and oriented by position of its origin and Euler parameters, respectively. Small strain linear elastic deformation of individual components, relative to their body references frames, is defined by linear combinations of deformation modes that are induced by constraint reaction forces and normal modes of vibration. A library of kinematic couplings between flexible and/or rigid bodies is defined and analyzed. Variational equations of motion for multibody systems are obtained and reduced to mixed differential-algebraic equations of motion. A space structure that must deform during deployment is analyzed, to illustrate use of the methods developed.

Wu, Shih-Chin↗
NASA NTRS1993

Models of the Cartwheel ring galaxy: Spokes and starbursts

Recent observations of this famous ring galaxy, including optical and near-infrared CCD surface photometry, and VLA radio continuum and 21 cm line mapping (Higdon 1992b, in prep.), have inspired a renewed modeling effort. Toomre's (1978, in The Large-scale Structure of the Universe, eds. Longair and Einasto) series of restricted three-body simulations demonstrated how the multiple rings could be produced in a nearly head-on galaxy collision. New models with a halo-dominated potential based on the 21 cm rotation curve are able to reproduce such details as the spacing between rings, ring widths, offset of the nucleus, and several kinematical features, thus providing strong support for the collisional theory. The new observations have shown there are little or no old stars in Cartwheel; it may consist almost entirely of gas and stars produced as a result of compression in the ring wave. To model this process Smooth Particle Hydrodynamics (SPH) simulations of the Cartwheel disk have been performed. Fixed gravitational potentials were used to represent the Cartwheel and a roughly 30 percent mass collision partner. The interaction dynamics was treated as in the usual restricted three-body approximation, and the effects of local self-gravity between disk particles were calculated. We are particularly interested in testing the theory that enhanced star formation in waves is the result of gravitational instability in the compressed region (see e.g. Kennicutt 1989, ApJ 344, 685). The gas surface density in a number of simulations was initialized to a value slightly below the threshold for local gravitational instability throughout most of the disk. The first ring wave produces relatively modest compressions (a factor of order a few), triggering instability in a narrow range of wavelengths. Self-gravity in the disk is calculated over a comparable range of scales. Simulations were run with isothermal, adiabatic, and adiabatic with radiative cooling characterized by a relatively short timescale. The isothermal approximation is good except in the vicinity of the strong second (inner) ring, and several snapshots from one case are shown in the figure below. Flocculent spiral segments are present before the collision, and these are compressed into dense knots in the ring wave. These knots are likely to be sites of vigorous star formation. In the strong rarefaction behind the outer ring most of the knots are radially stretched and sheared, giving rise to spoke-like features. A few dense knots are evidently very tightly bound, because they retain their coherence and are stretched relatively little through the rarefaction. This is in accord with evidence for continuing star formation in some spokes (Marcum, Appleton and Higdon 1992). The number and spacing of spokes is a direct function of the scale of the gravitational instability in the disk. Thus, the gravitational instability theory, together with the hypothesis that massive stars are only formed in dense knots of gas, can account for most of the distinct morphology of the Cartwheel.

Struck-Marcell, Curtis↗
DOE OSTI2023

Triple interference, non-linear Talbot effect and gravitization of the quantum

Recently we have discussed a new approach to the problem of quantum gravity in which the quantum mechanical structures that are traditionally fixed, such as the Fubini–Study metric in the Hilbert space of states, become dynamical and so implement the idea of gravitizing the quantum. Here, in this paper we elaborate on a specific test of this new approach to quantum gravity using triple interference in a varying gravitational field. Our discussion is driven by a profound analogy with recent triple-path interference experiments performed in the context of non-linear optics. We emphasize that the triple interference experiment in a varying gravitational field would deeply influence the present understanding of the kinematics of quantum gravity and quantum gravity phenomenology. We also discuss the non-linear Talbot effect as another striking phenomenological probe of gravitization of the geometry of quantum theory.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1992

An accreting black hole model for Sagittarius A

Several observations, notably of broad He I, Br-alpha, and Br-gamma emission lines from the vicinity of IRS 16, indicate the presence of a strong circumnuclear wind near the dynamical center of the Galaxy. Sgr A, a hypothesized supermassive object situated about 0.06 pc to the west of IRS 16, should be accreting from this wind if it is not itself a source of gaseous outflow, for which there is currently no observational evidence. Here, the spectrum and flux of radiation resulting from this process are calculated, and it is shown that they are consistent with the data over at least 12 decades of frequency. Together with the kinematic studies of the stellar and gas distributions in this region, the model argues strongly in favor of Sgr A being a black hole with mass over a million solar masses.

Melia, Fulvio↗
NASA NTRS2013

Adams-Based Rover Terramechanics and Mobility Simulator - ARTEMIS

The Mars Exploration Rovers (MERs), Spirit and Opportunity, far exceeded their original drive distance expectations and have traveled, at the time of this reporting, a combined 29 kilometers across the surface of Mars. The Rover Sequencing and Visualization Program (RSVP), the current program used to plan drives for MERs, is only a kinematic simulator of rover movement. Therefore, rover response to various terrains and soil types cannot be modeled. Although sandbox experiments attempt to model rover-terrain interaction, these experiments are time-intensive and costly, and they cannot be used within the tactical timeline of rover driving. Imaging techniques and hazard avoidance features on MER help to prevent the rover from traveling over dangerous terrains, but mobility issues have shown that these methods are not always sufficient. ARTEMIS, a dynamic modeling tool for MER, allows planned drives to be simulated before commands are sent to the rover. The deformable soils component of this model allows rover-terrain interactions to be simulated to determine if a particular drive path would take the rover over terrain that would induce hazardous levels of slip or sink. When used in the rover drive planning process, dynamic modeling reduces the likelihood of future mobility issues because high-risk areas could be identified before drive commands are sent to the rover, and drives planned over these areas could be rerouted. The ARTEMIS software consists of several components. These include a preprocessor, Digital Elevation Models (DEMs), Adams rover model, wheel and soil parameter files, MSC Adams GUI (commercial), MSC Adams dynamics solver (commercial), terramechanics subroutines (FORTRAN), a contact detection engine, a soil modification engine, and output DEMs of deformed soil. The preprocessor is used to define the terrain (from a DEM) and define the soil parameters for the terrain file. The Adams rover model is placed in this terrain. Wheel and soil parameter files can be altered in the respective text files. The rover model and terrain are viewed in Adams View, the GUI for ARTEMIS. The Adams dynamics solver calls terramechanics subroutines in FORTRAN containing the Bekker-Wong equations.

Trease, Brian P.↗
DOE OSTI2025

Impact of tracking resolution on 𝜙-meson spin alignment measurements

Measurements of global spin alignment of vector mesons in relativistic heavy-ion collisions can provide unique insights into spin-orbit interactions and vector meson dynamics in the quark-gluon plasma produced in those collisions. The global spin alignment is measured by the 00th coefficient of the spin density matrix, 𝜌 00 , via the polar angle (𝜃*) of the decay-kaon momentum in the parent rest frame with respect to the direction of the orbital angular momentum of the collision. Such measurements are affected by the angular and momentum resolutions of the reconstructed tracks in the experiment. Such effects are nontrivial because of kinematic complications caused by the boost to the parent rest frame, and could be important given that the global spin alignment signal is weak. In this paper, we investigate the effects of experimental tracking resolutions on measurements of the 𝜙 (1020) meson 𝜌 00 . We study these effects for two methods of 𝜌 00 measurements, the conventional method analyzing the 𝜙⁢−meson yield versus cos 2 ⁡𝜃* and the invariant mass (𝑚 inv ) method utilizing ⟨cos 2 ⁡𝜃*⟩ versus 𝑚 inv . Using typical resolution values from experiments, we find that the effect of track resolution on 𝜌 00 is small, well within typical measurement uncertainties.

Relativistic heavy-ion collisions↗