Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Irrigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Scat Detection Dog Surveys for the San Joaquin Kit Fox on the Lawrence Livermore National Laboratory's Experimental Test Site (Site 300) and the Corral Hollow Ecological Reserve, Alameda and San Joaquin Counties, California

The San Joaquin kit fox (Vulpes macrotis mutica) historically occupied a large range in the San Joaquin Valley, California; however, their populations and habitat have since been significantly reduced by human impacts. More than 95% of the potential habitat for kit foxes on the San Joaquin Valley floor has been converted to irrigated agriculture, urbanized, or industrialized. The San Joaquin kit fox was listed as endangered by the USFWS in 1967 and as threatened by the State of California in 1971. In 2018, Working Dogs for Conservation (WD4C) was contracted by LLNS to provide professional conservation detection dog teams to survey for scats of San Joaquin kit fox on Site 300 and the neighboring California Department of Fish and Wildlife's Corral Hollow Ecological Reserve. The purpose of the surveys was to obtain updated information on kit fox presence on these properties.

54 ENVIRONMENTAL SCIENCES↗

Dose Calculation Methodology and Data for Solid Waste Performance Assessment and Composite Analysis at the Savannah River Site

This report provides a detailed description of the methodology developed to perform dose calculations for E-Area Low Level Waste Facility Performance Assessments and Savannah River Site Composite Analyses. Chapters 2 – 8 give a complete set of equations to be used to calculate dose for individual exposure pathways. The first set of dose scenarios assume that a member of the public establishes residence near the waste site and uses contaminated groundwater or contaminated surface water for personal consumption and to irrigate a garden and pasture where produce and farm animals are raised. Products from the garden and farm animals are used for personal consumption. This scenario applies to both E-Area Performance Assessments and Savannah River Site Composite Analyses. General dose exposure pathways for the resident farmer scenario are: 1. Ingestion pathways described in Chapter 2, 2. Inhalation pathways described in Chapter 3, 3. External exposure pathways described in Chapter 4, and 4. Recreational pathways described in Chapter 5 (Composite Analysis only). Doses from all of the above pathways are directly related to the contaminant concentration in the water. Additional dose scenarios considered for E-Area Performance Assessment assume that an inadvertent intruder encroaches on the waste disposal site after loss of institutional control. General dose exposure pathways considered for the inadvertent intruder are: 1. Ingestion pathways described in Chapter 6, 2. Inhalation pathways described in Chapter 7, and 3. External exposure pathways described in Chapter 8. Doses from all of the intruder pathways are directly related to the contaminant concentration in the buried waste. Special dose considerations related to human consumption of meat and dairy, and treatment of tritium in dose calculations are discussed in Chapter 9. Chapter 10 describes an Excel database named “Radionuclide, Element and Dose Parameter Data Package” that has been created to provide a system for maintaining the data required to perform radionuclide transport and dose calculations. This data includes: Isotope physical parameters and radioactive decay data needed for both transport and dose calculations, Isotope-specific dose coefficients and soil shielding factors associated with exposure pathways, Radionuclide drinking water concentration limits either published by the Environmental Protection Agency or derived from internal dose coefficients to meet the groundwater protection requirements in Department of Energy Order 435.1, Element-specific bio-transfer factors used in dose calculations, Dose equations and values of physical parameters and human factors used in dose calculations, and Key physical constants used in dose calculations. Revision 1 incorporates updated information developed since this report was issued for use in the next revision of the E-Area Low-Level Waste Facility Performance Assessment.

54 ENVIRONMENTAL SCIENCES↗

Building Island Resilience through the Energy, Water, Food Nexus

Islands face unique and often exaggerated threats from climate change. Additionally, the very nature of islands creates greater dependence on imported food and energy resources. Extreme events have highlighted weaknesses in island energy, water, and food systems as a result of utility outages and shipping delays. These events have challenged islands to improve their resilience and seek new strategies to ensure energy, water, and food security. One such island is Sint Eustatius, which has constructed a first of its kind solar park providing reliable energy, community agriculture, and harvested rainwater for irrigation This paper highlights integrated strategies to help islands enhance resilience across the energy, water, food nexus.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Current State-of-Practice in Dam Safety Risk Assessment

Dams provide significant benefits to the nation, serving as critical infrastructure to deliver water retention and control throughout the United States (US). Major cities could not function without the fresh water supply stored in dammed reservoirs, and many electrical systems rely on dependable hydroelectric power supply. Dams on rivers across the country protect communities against destructive flood impacts while providing navigable waters for transportation, irrigation for agriculture, and various opportunities for recreation. While dams provide many essential services, dam failure flooding can present significant risks to property and life. Over decades of experience, dam safety practices, including risk assessment, have evolved as engineering knowledge, scientific understanding, and technological advancements grow. This project summarizes the current state-of-practice in dam safety risk assessment.

13 HYDRO ENERGY↗

Big Wheel Farm: Farmland Scour Reduction

Flood irrigation benefits from low infrastructure costs and maintenance but the scour near the weirs can cause channeling of the flow preventing the water from evenly dispersing across the field. Using flow obstructions in front of the weir could reduce be a low cost solution to reduce the scour. The mitigation strategy was to virtually simulate the effects of various geometric changes to the morphology (e.g. holes and bumps) in front of the weir as a means to diffuse the high intensity flow coming from the gate. After running a parametric study for the dimensions of the shapes that included a Gaussian, semi-circle, and rectangle; a Gaussian-hole in front of the gates showed the most promise to reduce farm field shear-stresses with the added benefit of being easy to construct and implement in practice. Further the simulations showed that the closer the Gaussian-hole could be placed to the gate the sooner the high shear stress could be reduced. To realize the most benefit from this mitigation strategy, it was determined that the maximum depth of the Gaussian-hole should be 0.5 m. The width of the hole in the flow direction and the length of the Gaussian-hole normal to the flow should be 0.5 m and 3 m respectively as measured by the full width at half maximum.

42 ENGINEERING↗

Review of Landscaping Equipment Vibration Risk Exposure, LLNL Site 200 (Various Locations), Whole Body Vibration Seated and Standing Mowers

WBV (Whole-Body Vibration) for operators of seated and standing lawn mowers was conducted during landscape activities from April 2019 through August 2019 at various locations around LLNL Site 200. Mowing is generally performed by each landscaper for 2-3 days every other week with a maximum duration of 3-5 hours each day. On mowing days, other tasks are performed for the remainder of the day that do not expose the worker to WBV such as irrigation, blowing, or sweeping. The mowing terrain at LLNL is variable with typical reported conditions such as gopher holes, exposed tree roots, quick turns, normal and high growth, weeds, and mushy/wet ground that can result in jolts to the mower operator. The Larson Davis HVM200 seat pad with tri-axial accelerometer was used for monitoring workers. For the seated mowers, the HVM200 seat pad with tri-axial accelerometer was placed on the seat between the user and seat pan of the mower. For standing mowers, the seat pad with tri-axial accelerometer was wrapped with Dycem (for seat pad protection) and placed directly on top of the mower deck and underneath the end-user’s right foot. Monitoring for WBV was conducted while operators used different types, makes, and models of mowers. A total of sixteen samples were collected from the operators of seated mower and 6 samples were collected from operators of standing mower. This initial data sampling was part of a discovery phase to identify if WBV exposure met the 2016 ACGIH TLVs (Threshold Limit Values). This initial data identified that workers operating the mowers do not exceed either the TLV or Action Level (AL) for Weighted Acceleration Levels (A(8)) but typically exceed the Vibration Dose Value (VDV) lower boundary for the standing mowers.

59 BASIC BIOLOGICAL SCIENCES↗

Current State-of-Practice in Dam Safety Risk Assessment

Dams provide significant benefits to the nation, serving as critical infrastructure to deliver water retention and control throughout the United States (US). Major cities could not function without the fresh water supply stored in dammed reservoirs, and many electrical systems rely on dependable hydroelectric power supply. Dams on rivers across the country protect communities against destructive flood impacts while providing navigable waters for transportation, irrigation for agriculture, and various opportunities for recreation. While dams provide many essential services, dam failure flooding can present significant risks to property and life. Over decades of experience, dam safety practices, including risk assessment, have evolved as engineering knowledge, scientific understanding, and technological advancements grow. This project summarizes the current state-of-practice in dam safety risk assessment.

42 ENGINEERING↗

Design Consideration for Solar Powered Wastewater Treatment Facility for Agriculture and Potable Usage on Acoma Pueblo Reservation

Environmental stewardship has long been a guiding principle among indigenous peoples. Acoma Pueblo, located approximately 45 miles west of Albuquerque, New Mexico, shares these values. They are exploring how to incorporate these values into future development projects. As such, Acoma recently created a wastewater treatment facility to provide irrigation water to nearby crops. Treatment facilities like this further sustainable practices and benefit the community but may draw power from the grid. This report looks at design considerations for possible photovoltaic utilization at the site to offset current power and monetary costs. Lessons learned from a larger, municipal wastewater treatment center will be applied with special considerations for Acoma Pueblo's values and unique wastewater treatment facility configuration.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Influence of Nanoconfinement and Elevated Temperatures on Geocolloid-Facilitated Transport of Energy related Contaminants

Fossil fuels obtained using hydraulic fracturing and nuclear energy are deemed crucial for meeting the current and future energy demands of the United States. The utilization of these resources, especially fossil fuels from hydraulic fracturing, has increased rapidly within the last decade. However, with the increasing levels of hydraulic fracturing activities, the occurrence and fate of chemicals used in these processes in the geosystem, as well as the potential consequences of their interactions with environment and geosystems (e.g. mineral-based geocolloids and geosurfaces), have been increasingly recognized as issues warranting consideration owing to the toxic nature of these chemicals. Scientific results originated from this project has brought better understandings on how such contaminants can preferentially or adversely interact with geosystems and how geocolloids can facilitate their transport by realistically mimicking geological conditions and environments in the laboratory level for the first time. Based on such knowledge, it may eventually lead to the development of mitigation strategies for reducing and minimizing the transport and wide distribution of contaminants and pollutants. This aspect is important for the society to ensure that energy-related contaminants do not find their way to waterbodies that are used as drinking water or irrigation. The project is also anticipated to increase public awareness about potential adverse effects of energy systems on the geosphere and environment and may motivate society to consider better mitigation strategies to prevent such occurrences.

(Nano)Confinement↗

Nevada National Security Site 2019 Waste Management Monitoring Report Area 3 and Area 5 Radioactive Waste Management Sites

Environmental monitoring data are collected at and around the Area 3 and Area 5 Radioactive Waste Management Sites (RWMSs) within the Nevada National Security Site (NNSS). This report summarizes the 2019 environmental data to provide an overall evaluation of RWMS performance and to support environmental compliance and performance assessment (PA) activities. Some of these data (e.g., radiation exposure, air, and groundwater) are presented in other reports (Mission Support and Test Services, LLC 2019, 2020a, 2020b). Direct radiation monitoring data indicate exposure levels at the Area 3 and Area 5 RWMSs are within the range of background levels measured at the NNSS. Slightly elevated exposure levels outside the Area 3 RWMS are attributed to nearby historical aboveground nuclear weapons tests. Air monitoring data at the Area 3 and Area 5 RWMSs show that tritium concentrations in water vapor and americium and plutonium concentrations in air particles are below Derived Concentration Standards for these radionuclides. Groundwater monitoring data indicate the groundwater in the uppermost aquifer beneath the Area 5 RWMS is not impacted by RWMS operations. Results of groundwater analysis from wells around the Area 5 RWMS are below established investigation levels. Leachate samples collected from the leachate collection systems at the Area 5 mixed low-level waste disposal unit are below established contaminant regulatory limits. During 2019, precipitation at the Area 3 RWMS was 77 percent above average, and precipitation at the Area 5 RWMS was 69 percent above average. Water balance measurements indicate that evapotranspiration from the vegetated weighing lysimeter at the Area 5 RWMS dries the soil and prevents downward percolation of precipitation more effectively than evaporation as measured from the bare-soil weighing lysimeter. Vadose zone monitoring in the Area 3 and Area 5 RWMS soil covers shows no evidence of precipitation percolating through the covers to the waste. Moisture from precipitation did not percolate below 120 centimeters (3.9 feet [ft]) in the vegetated final cover on the U-3ax/bl disposal unit at the Area 3 RWMS during 2019. There was no drainage through 2.4 meters (8 ft) of soil as indicated from the Area 3 drainage lysimeters that received only natural precipitation. At the Area 3 RWMS, which received three times the natural precipitation, 57 percent of the applied precipitation and irrigation drained from the bare-soil drainage lysimeter. All 2019 monitoring data indicate that the Area 3 and Area 5 RWMSs are performing within expectations of the model and parameter assumptions for the facilities’ PAs.

2019↗

Scat Detection Dog Surveys for the San Joaquin Kit Fox on the Lawrence Livermore National Laboratory's Experimental Test Site (Site 300) and the Corral Hollow Ecological Reserve: 2020 Deployment

The San Joaquin kit fox (Vulpes macrotis mutica) historically occupied an extensive range in the San Joaquin Valley, California; however, their populations and habitat have since been significantly reduced by human impacts (United States Fish and Wildlife Service [USFWS] 1998). More than 95% of the potential habitat for kit foxes on the San Joaquin Valley floor has been converted to irrigated agriculture, urbanized, or industrialized lands. The San Joaquin kit fox was listed as endangered by the USFWS in 1967 and as threatened by the State of California in 1971. Records from local surveys, research projects, and incidental sightings indicate the present distribution of kit foxes extends from 1) southern Kern County north to Contra Costa, Alameda, and San Joaquin counties on the west side of the valley and to Stanislaus County on the east side; 2) into some of the larger, uncultivated valley-floor land parcels in Kern, Tulare, Kings, Fresno, Madera, and Merced counties; and 3) westward within 5 counties in the interior coastal range (USFWS 1998). Kit foxes have been denoted to occur in 3 geographically distinct core and several satellite populations in a heavily fragmented landscape, with the largest extant populations concentrated in the southern part of the range and smaller populations and isolated sightings in the central and northern portions (USFWS 1998, 2010).

54 ENVIRONMENTAL SCIENCES↗

Semi-automated Design of Artificial Intelligence Earth Systems Models

Prediction and observation of water cycles at various scales involve not only patterns isolated in space and time, but also modeling of complex spatio-temporal relationships across multiple domains. For instance, evapotranspiration (ET) and leaf area indexes (LAI) are two parameters that are needed to accurately model and understand land-atmosphere processes. Accurate assessments of ET and LAI are critical for understanding hydrological processes, deforestation, crop yield, and irrigation impacts. However, ET estimates for global simulations are available at very coarse spatial resolution. They are usually derived from satellite data based on broad plant functional types (PFTs), which fail to capture fine-scale variations because of changes in vegetation type across the globe. Similarly LAI estimates have typically been derived from vegetation indices at global scales or estimated locally using physical models, both of which suffer from a range of uncertainties that impact model sensitivity. The new era of AI model development for Earth systems (ES) calls for data-driven methods that provide domain scientists with uncertainty-aware estimations of biophysical parameters such as ET and LAI in a generalizable, interpretable, and discoverable manner.

54 ENVIRONMENTAL SCIENCES↗

Using machine learning to improve land use/cover characterization and projection for scenario-based global modeling

The characterization of the land surface in models is critical for robust estimation of the water cycle and associated extremes. Land use determines water demand, and land cover affects water availability. The interaction between water demand and availability is the key determinant of whether systems are resilient to variability in the overall water cycle. Furthermore, activities such as irrigation and deforestation or afforestation may influence regional to global precipitation patterns, depending on the extent of the activity. Thus this proposed work aims to address the following question: How does integrated land use/cover data and improved land use/cover projection, as informed by machine learning approaches, better resolve human-earth system resilience to water cycle variability and extremes?

54 ENVIRONMENTAL SCIENCES↗

DOE Early Career Award # DE-SC0012152: Understanding the Roles of Cloud Microphysics and Land Surface Coupling Feedbacks in Multi-Scale Predictions of Central US Summer Hydroclimate (Final Report)

This summarizes technical highlights from the DOE Early Career Project entitled “Understanding the Roles of Cloud Microphysics and Land Surface Coupling Feedbacks in Multi-Scale Predictions of Central US Summer Hydroclimate” led by PI Mike Pritchard at the University of California. The project’s original aims were to investigate trade-offs of cloud superparameterization such as the effects of microphysical assumptions on mesoscale convective systems (Section I) and the representation of land-atmosphere coupling under explicit convection (Section II). Under the same broader theme of water cycle dynamics, superparameterization, and land interaction, the project evolved to further investigate the climate dynamics of irrigation, vegetation and streamflow (Section III), the dynamics of the Madden- Julian Oscillation (Section IV), as well as the use of modern machine learning to replace traditional sub grid approaches for climate simulation (Section V). Twenty peer-reviewed journal publications were produced as a result of this project (Section VI).

54 ENVIRONMENTAL SCIENCES↗

Epigenetic Control of Drought Response in Sorghum (EPICON)

Genetic manipulation of crops to increase the presence of desirable traits has been critical to increasing agricultural productivity. These changes have primarily involved modification of the plant’s DNA sequence. However, there is increasing evidence that environmental responses are also mediated by epigenetics, which involves heritable changes without changes in DNA sequence. Epigenetic changes have been shown to play a major role in regulating plant responses to drought, an increasing problem worldwide due to climate change. In general, exposure of plants to water limitation triggers epigenetic changes, which include remodeling of chromatin, the network of DNA, RNA and various proteins making up chromosomes, and related changes in regulatory mechanisms. EPICON’s efforts focus on unraveling the role epigenetic signals play in acclimation to and recovery from drought through effects on individual transcription factors or transcriptional networks that direct entire metabolic pathways. To achieve this goal we will follow responses to water deprivation in sorghum, a widely cultivated cereal with recognized drought tolerance. In EPICON’s field trials, sorghum will be grown under controlled irrigation conditions. Leaf and root samples will be taken to perform molecular phenotyping to track changes in epigenetic, transcriptomic, metabolomic and proteomic footprints. Analysis of this data will provide a better understanding of the epigenetic processes related to drought tolerance, leading to our ultimate goal of identifying transcriptional regulators and pathways controlling drought resistance. The identified genetic targets and their regulatory pathways will be used in future efforts to improve growth of sorghum and other crops in the field and in marginal lands under water-limiting conditions.

59 BASIC BIOLOGICAL SCIENCES↗

Blue Rock CropSpanPV - Low Cost Racking for Agricultural Solar Photovoltaics

In this work, a total of four solar panel layouts, applied to Agrivoltaics, are investigated. This study presents two hypotheses: 1. Prefabrication - Lower total cost can be achieved by constructing a pre-assembled, pre-wired solar array in a factory, with automation, then rapidly deploying it in the field. 2. Tension Structures - Using tension structures in a way to suspend an overhead solar array also reduces costs when compared to conventional support methods. Designs are presented for frames to hold the panels. Configurations are advanced to connect the frames into arrays. Supports and foundations to hold the arrays in the desired layout are calculated, selected and presented. Cost models are prepared for the four layouts, which include definition of the business enterprise, the manufacturing operation, and the required facility for production at scale. Cost models include, detail material and task/labor take-offs for both manufacturing and installation. Comparisons with conventional system adapted to Agrivoltaics reveal that the two hypotheses do not hold true. A prefabricated array requires additional material that is not needed in the base system and the cost of this additional material is not outweighed by the cost savings of reduced field installation. The cost of wire rope for a tension structure does result in an economy of material, however, the cost of end connections and tensioning devices adds significantly to the cost of the overall tension structure. Foundation loads with tension structures, especially the large wind uplift seen with a fixed tilt solar array, impose significant constraints and high costs. The following conclusions are recommended for further consideration: 1. Best Case Agrivoltaic Configuration - The best value/lowest cost configuration for agrivoltaics is the installation of solar panels mounted on a single axis tracker in either a 2-in-portrait or 2-in landscape arrangement. This is useful for grazing lands and for staple crops which require high light levels. These applications represent the vast majority of the potential agrivoltaic market. Important elements in this configuration are the specific geometric layout coordinated with the various field operations and a control system linked between the farm equipment and single axis tracker. The control system is to monitor location and orientation, then actively tilt the solar panels or brake the field equipment to provide clearance and avoid collisions. 2. Long Span Applications - The use of tension structures for an overhead fixed tilt array is beneficial where long spans are a necessity, especially where the base support in the project location has consolidated rock near the surface or some other solid structure. One application is spanning wide irrigation canals. Another may be as an installation at the top deck of parking structures. 3. Direct Ground Mount Configuration – Having skids at the base of a pre-fabricated array that extend when the array is deployed, could be a successful design. This could be a useful strategy for dense, flat, ground-mount configurations like that employed by a couple of successful commercial operations (5G Maverick and Erthos). Arrays would be orientated north and south, deployed very low on prepared grade. Arrays would be aligned closely next to each other and anchored with small ground screws or simply with ballast. This same product arrangement could be very useful for rapid deployment and set-up of solar arrays for temporary deployments, disaster response and the military operations

14 SOLAR ENERGY↗

Produced Water-Economic, Socio, Environmental Simulation Model (PW-ESEim) Model: Proof-of-Concept for Southeastern New Mexico

A proof-of-concept tool, the Produced Water-Economic, Socio, Environmental Simulation model (PW-ESESim), was developed to support ease of analysis. The tool was designed to facilitate head-to-head comparison of alternative produced water source, treatment, and reuse water management strategies. A graphical user interface (GUI) guides the user through the selection and design of alternative produced water treatment and reuse strategies and the associated health and safety risk and economic benefits. At the highest conceptual level, alternative water strategies include the selection of a source water (locally or regionally available produced water), treatment strategy (pre-treatment, physical, chemical, biological, desalination, and post-treatment processes) and product water purpose (e.g., irrigation, industrial processing, environmental). After selection of these details, the PW-ESESim output a number of key economic, societal, environmental, public/ecological health and safety metrics to support user decision-making; specific examples include, cost of treatment, improvements in freshwater availability, human and ecologic health impacts and growth in local jobs and the economy. Through the simulation of different produced water treatment and management strategies, tradeoffs are identified and used to inform fit-for-purpose produced water treatment and reuse management decisions. While the tool was initially designed using Southeastern New Mexico (Permian Basin) as a case study, the general design of the PW-ESESim model can be extended to support other oil and gas regions of the U.S.

54 ENVIRONMENTAL SCIENCES↗

Non-Powered Dam Retrofit Exemplary Design for Hydropower Applications

Non-powered dams (NPDs) represent complex systems, situated at the intersection of natural stream environments and the built environment. The presence and operations of NPDs affect stream constituents (e.g., fish, recreational craft, sediment, water) and serve one or more engineered purposes (e.g., recreation, flood control, water supply, irrigation, tailings and debris control, navigation). By definition, NPDs do not provide hydropower generation. However, every NPD contains some untapped hydropower resource potential, represented by the pre-existing hydraulic head created by the dam and presence of flowing water. Adding power generation to an NPD requires retrofitting the NPD, which could involve the addition of any new component or function beyond that currently installed. Because this research is funded by the US Department of Energy Water Power Technologies Office, adding hydropower to NPDs is among the primary objectives for research investment. However, NPD retrofitting extends beyond the purview of hydropower additions. This report provides background information regarding NPD development in the United States, including an overview of the US NPD population, development potential, and recent development. It also summarizes challenges and opportunities facing NPD retrofit development, highlights the importance of maintaining or improving stream and dam functionality, notes key NPD characteristics, describes NPD retrofit methods, and identifies innovation areas for spurring future NPD retrofit development. Section 4 describes retrofit exemplary design principles and concepts that could apply to a wide range of NPD projects. These principles and concepts inform an NPD Retrofit Exemplary Design Specification (REDS), as included in Appendix A. The NPD REDS is heavily influenced by prior work under the standard modular hydropower technology acceleration research initiative, especially the work documented in the Exemplary Design Envelope Specification for Standard Modular Hydropower Technology (Witt et al., 2017). Whereas this prior work focuses on a particular technology class that applies most intentionally for new stream-reach development (i.e., greenfield sites), the NPD REDS contained herein applies more broadly to the NPD resource class and is technology-agnostic (i.e., the specific technologies intended to be described are not explicitly prescribed). This report serves as a part of early-phase research on NPD retrofit development, aimed toward spurring additional, follow-on efforts to specifically address development challenges, capitalize on development opportunities, and inspire innovation. As documented in the landmark “Hydropower Vision” report (DOE 2016), “transformative technical innovations able to meet the co-objectives of environmental sustainability and low-carbon energy will be critical to enabling additional hydropower growth.” This report serves as an important step in steering transformation of US non-powered dam infrastructure.

13 HYDRO ENERGY↗