Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ion range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Capture and Dissociative Capture of a Single Electron in the Process of Interaction of Doubly Charged Ions with CO Molecules

The absolute cross sections of single-electron capture and single-electron capture with dissociation in the interaction between incident He{sup 2+}, C{sup 2+}, N{sup 2+}, and O{sup 2+} ions with energies from 6.4 to 36.4 keV and СО molecules were measured. It is demonstrated that the cross section of dissociative capture is much larger than the cross section of single-electron capture for O{sup 2+} projectile ions. A qualitative explanation for this effect is provided.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dynamics of lithium ions in borotellurite mixed former glasses: Correlation between the characteristic length scales of mobile ions and glass network structural units

We have studied the mixed network former effect on the dynamics of lithium ions in borotellurite glasses in wide composition and temperature ranges. The length scales of ion dynamics, such as characteristic mean square displacement and spatial extent of sub-diffusive motion of lithium ions have been determined from the ac conductivity and dielectric spectra, respectively, in the framework of linear response theory. The relative concentrations of different network structural units have been determined from the deconvolution of the FTIR spectra. A direct correlation between the ion dynamics and the characteristic length scales and the relative concentration of BO{sub 4} units has been established for different compositions of the borotellurite glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

QCD phase transition studied by means of hadron production

We address the hadronization process of a QGP fireball formed in relativistic heavy-ion collisions in the entire range of past and present heavy ion collision reaction energies. A precise method of analysis of hadron multiplicities has evolved into the “SHARE with CHARM” statistical hadronization model. Using this tool we describe successfully—over many orders of magnitude—the yield of all hadrons produced in the full range of reaction energies and centralities; exceptions are peripheral and more central collisions at low energies. The properties of the fireball final state can be understood by considering all primary hadronic particles. The dense hadron fireball created at SPS, RHIC, and LHC shows the final state differentiated solely by: i) volume changes; and ii) strangeness, (charm) flavor content. A universal hadronization pressure P = 80 ± 3 MeV/fm{sup 3} is found. The strangeness content of a large fireball as compared to entropy shows the presence of quark-gluon plasma degrees of freedom near the chemical QGP equilibrium. The 'Universal Hadronization’ condition common to SPS, RHIC, and LHC agrees with the proposed direct QGP fireball evaporation into free-streaming hadrons. Looking forward we discuss qualitatively how heavy flavor production contributes to energy stopping in the central rapidity region as function of reaction energy: the cases of LHC at full energy and future super-LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light ion production for a future radiobiological facility at CERN: Preliminary studies

Recent medical applications of ions such as carbon and helium have proved extremely effective for the treatment of human patients. However, before now a comprehensive study of the effects of different light ions on organic targets has not been completed. There is a strong desire for a dedicated facility which can produce ions in the range of protons to neon in order to perform this study. This paper will present the proposal and preliminary investigations into the production of light ions, and the development of a radiobiological research facility at CERN. The aims of this project will be presented along with the modifications required to the existing linear accelerator (Linac3), and the foreseen facility, including the requirements for an ion source in terms of some of the specification parameters and the flexibility of operation for different ion types. Preliminary results from beam transport simulations will be presented, in addition to some planned tests required to produce some of the required light ions (lithium, boron) to be conducted in collaboration with the Helmholtz-Zentrum für Materialien und Energie, Berlin.

43 PARTICLE ACCELERATORS↗

Highly-selective wettability on organic light-emitting-diodes patterns by sequential low-power plasmas

Patterned organic light-emitting-diode substrates were treated by oxygen (O{sub 2}) and tetrafluoromethane (CF{sub 4}) radio-frequency (rf, 13.56 MHz) plasmas of low-power (close to 1 W) that were capacitively-coupled. An unexpected wettability contrast (water contact angle difference up to 90 deg. ) between the indium-tin-oxide anode and the bank resist regions was achieved, providing excellent conditioning prior to the ink-jet printing. This selectivity was found to be adjustable by varying the relative exposure time to the O{sub 2} and CF{sub 4} sequential plasmas. Static contact angle measurements and extensive x-ray photoelectron spectroscopy analyses showed that the wetting properties depend on the carbon and fluorine chemical functional groups formed at the outermost surface layers, whereas atomic force microscopy images did not show a morphological change. Plasma optical emission spectroscopy and ion mass spectroscopy suggested that surface functionalization was initiated by energy transfer from ionic species (O{sup +}, O{sub 2}{sup +}, CF{sup +}, CF{sub 2}{sup +}, and CF{sub 3}{sup +}) and excited neutrals (O{sup *} and F{sup *}). The absolute ion fluxes measured on the substrates were up to 10{sup 14} cm{sup -2} s{sup -1} and the ion energies up to 20 eV, despite the low powers applied during the process.

36 MATERIALS SCIENCE↗

Modeling nanoparticle charge distribution in the afterglow of non-thermal plasmas and comparison with measurements

Particle charging in the afterglows of non-thermal plasmas typically take place in a non-neutral space charge environment. We model the same by incorporating particle-ion collision rate constant models, developed in prior work by analyzing particle-ion trajectories calculated using Langevin Dynamics simulations, into species transport equations for ions, electrons and charged particles in the afterglow. A scaling analysis of particle charging and additional Langevin Dynamics calculations of the particle-ion collision rate constant are presented to extend the range of applicability to ion electrostatic to thermal energy ratios of 300 and diffusive Knudsen number (that scales inversely with gas pressure) up to 2000. The developed collision rate constant models are first validated by comparing predictions of particle charge against measured values in a stationary, non-thermal DC plasma from past PK-4 campaigns published in Phys. Rev. Lett. 93(8): 085001 and Phys. Rev. E 72(1): 016406). The comparisons reveal excellent agreement within ±35% for particles of radius 0.6,1.0,1.3 μm in the gas pressure range of ~20-150 Pa. The experiments to probe particle charge distributions by Sharma et al. (J. Physics D: Appl. Phys. 53(24): 245204) are modeled using the validated particle-ion collision rate constant models and the calculated charge fractions are compared with measurements. The comparisons reveal that the ion/electron concentration and gas temperature in the afterglow critically influence the particle charge and the predictions are generally in qualitative agreement with the measurements. Along with critical assessment of the modeling assumptions, several recommendations are presented for future experimental design to probe charging in afterglows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of Pulse Counting for the Mars Organic Mass Analyzer (MOMA) Ion Trap Detection Scheme

The Mars Organic Mass Analyzer is being developed at Goddard Space Flight Center to identify organics and possible biological compounds on Mars. In the process of characterizing mass spectrometer size, weight, and power consumption, the use of pulse counting was considered for ion detection. Pulse counting has advantages over analog-mode amplification of the electron multiplier signal. Some advantages are reduced size of electronic components, low power consumption, ability to remotely characterize detector performance, and avoidance of analog circuit noise. The use of pulse counting as a detection method with ion trap instruments is relatively rare. However, with the recent development of high performance electrical components, this detection method is quite suitable and can demonstrate significant advantages over analog methods. Methods A prototype quadrupole ion trap mass spectrometer with an internal electron ionization source was used as a test setup to develop and evaluate the pulse-counting method. The anode signal from the electron multiplier was preamplified. The an1plified signal was fed into a fast comparator for pulse-level discrimination. The output of the comparator was fed directly into a Xilinx FPGA development board. Verilog HDL software was written to bin the counts at user-selectable intervals. This system was able to count pulses at rates in the GHz range. The stored ion count nun1ber per bin was transferred to custom ion trap control software. Pulse-counting mass spectra were compared with mass spectra obtained using the standard analog-mode ion detection. Prelin1inary Data Preliminary mass spectra have been obtained for both analog mode and pulse-counting mode under several sets of instrument operating conditions. Comparison of the spectra revealed better peak shapes for pulse-counting mode. Noise levels are as good as, or better than, analog-mode detection noise levels. To artificially force ion pile-up conditions, the ion trap was overfilled and ions were ejected at very high scan rates. Pile-up of ions was not significant for the ion trap under investigation even though the ions are ejected in so-called 'ion-micro packets'. It was found that pulse counting mode had higher dynamic range than analog mode, and that the first amplification stage in analog mode can distort mass peaks. The inherent speed of the pulse counting method also proved to be beneficial to ion trap operation and ion ejection characterization. Very high scan rates were possible with pulse counting since the digital circuitry response time is so much smaller than with the analog method. Careful investigation of the pulse-counting data also allowed observation of the applied resonant ejection frequency during mass analysis. Ejection of ion micro packets could be clearly observed in the binned data. A second oscillation frequency, much lower than the secular frequency, was also observed. Such an effect was earlier attributed to the oscillation of the total plasma cloud in the ion trap. While the components used to implement pulse counting are quite advanced, due to their prevalence in consumer electronics, the cost of this detection system is no more than that of an analog mode system. Total pulse-counting detection system electronics cost is under $250

Van Amerom, Friso H.↗

Plasma beta dependence of the ion-scale spectral break of solar wind turbulence: high-resolution 2D hybrid simulations

We investigate properties of the ion-scale spectral break of solar wind turbulence by means of two-dimensional high-resolution hybrid particle-in-cell simulations. We impose an initial ambient magnetic field perpendicular to the simulation box and add a spectrum of in-plane, large-scale, magnetic and kinetic fluctuations. We perform a set of simulations with different values of the plasma β, distributed over three orders of magnitude, from 0.01 to 10. In all cases, once turbulence is fully developed, we observe a power-law spectrum of the fluctuating magnetic field on large scales (in the inertial range) with a spectral index close to −5/3, while in the sub-ion range we observe another power-law spectrum with a spectral index systematically varying with β (from around −3.6 for small values to around −2.9 for large ones). The two ranges are separated by a spectral break around ion scales. The length scale at which this transition occurs is found to be proportional to the ion inertial length, d {sub i}, for β ≪ 1 and to the ion gyroradius, ρ{sub i}=d{sub i}√β, for β ≫ 1, i.e., to the larger between the two scales in both the extreme regimes. For intermediate cases, i.e., β ∼ 1, a combination of the two scales is involved. We infer an empiric relation for the dependency of the spectral break on β that provides a good fit over the whole range of values. We compare our results with in situ observations in the solar wind and suggest possible explanations for such a behavior.

79 ASTRONOMY AND ASTROPHYSICS↗

HRTEM study of track evolution in 120-MeV U irradiated Gd2Ti2O7

High resolution Scanning Transmission Electron Microscopy (HRTEM) experiments were performed on Gd2Ti2O7 pyrochlores irradiated with 120-MeV U ions. A judicious choice of irradiation energy, sample preparation (using Focused Ion Beam) and analytical technique (HRTEM) allowed us to visualize the complete evolution of tracks from the surface of samples down to depths exceeding the projected range of irradiating ions. Such features as variation of track diameters, changes in track directions and discontinuous segments of tracks were clearly documented at various depths. By using two different STEM imaging modes: High- and Low-Angle Annular Dark Field imaging (HAADF and LAADF), it was possible to observe the layered structure of tracks composed of an amorphous core surrounded by a strained crystalline envelope.

120↗

Radiation induced modification in nanoscale hardness of ZnO cone structures

In this paper, the effect of ion irradiation on nanoscale hardness of ZnO microcones is reported. The hardness of ZnO cones determined by nanoindentation using atomic force microscope initially increases from 4.7{+-}1.4 to 9.5{+-}1.6 GPa after irradiation with 1.2 MeV Ar{sup +8} ions at an ion fluence of 10{sup 15} ions cm{sup -2} and then decreases with increasing ion fluence. This change in mechanical hardness has been correlated with the residual stress of the sample revealed by Raman peak shift in the E{sub 2}(H) mode. These results show that the generally reported radiation-hard nature of ZnO depends critically on irradiation conditions, especially the irradiation temperature.

36 MATERIALS SCIENCE↗

Characterization of molecular mass ranges of two coal tar distillate fractions (creosote and anthracene oils) and aromatic standards by LD-MS, GC-MS, probe-MS and size-exclusion chromatography

Laser-desorption mass spectrometry (LD-MS) method development was undertaken to improve estimates of mass ranges for complex hydrocarbon mixtures. A creosote oil, an anthracene oil, and a mixture of known polynuclear aromatic hydrocarbon (PAH) compounds were examined. The formation of cluster ions was possible without overloading the detector system. These multimer ions overlapped with higher-mass ion signals from the sample. However, careful balancing of sample concentration, laser power, total ion current, and delayed ion extraction appears to show high-mass materials without generating high-mass multimer (artifact) ions. It is possible to suppress the formation of cluster ions by keeping low target concentrations and, consequently, low gas phase concentrations formed by the laser pulse. The principal method used in this work was the fractionation of samples by planar chromatography followed by successive LD-MS analysis of the separated fractions directly from the chromatographic plates. This method separated the more abundant small molecules from the less abundant large molecules to permit the generation of their mass spectra independently, as well as reducing the concentration of sample by spreading over the PC-plate. The technique demonstrably suppressed multimer formation and greatly improved the reproducibility of the spectra. Results showed the presence of molecule ions in the ranges m/z 1000-2000 for the anthracene oil sample and m/z 600-1500 for the creosote oil sample, tailing off to m/z about 5,000. The creosote oil contained significantly less of this high-mass material than the anthracene oil sample, and in both cases, high-mass material was only present in low quantities. The method outlined in the paper appears directly applicable to the characterization of heavier coal and petroleum derived fractions. 44 refs., 14 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

The 'convection surge' mechanism of ion acceleration during substorms

To explain the presence of the so-called 'bounce-phase-bunched' ion distributions (eV range to about 20 keV) observed in the earth's geosynchronous magnetosphere in association with substorm expansion phases, Quinn and Southwood proposed the 'convection surge' mechanism of ion energization. This mechanism is associated with a sudden earthward displacement of curved field lines resulting from the short-lived application of an intense, east-west electric field. A quantitative computer model of the mechanism has been constructed here. It is found that the mechanism easily generates the bounce-phase-bunched ion distributions in question. Additionally, the mechanism can generate dramatically field-aligned distributions. It is proposed that a key general characteristic of geosynchronous ion pitch angle distributions, field-aligned low energies, and field-perpendicular high energies is a signature of this energization mechanism. The presence of field-aligned ions cannot be presumed to be a signature of recent ionospheric extraction.

Mauk, B. H.↗

Enhanced conduction in CdSe nanowires on 200 keV phosphorous negative ion implantation

Highlights: • CdSe nanowires were prepared by template assisted electro-deposition. • CdSe nanowires were implanted with 200 keV P{sup −} ions at different fluence. • Structure of CdSe NWs remained intact on ion implantation. • Optical band gap of CdSe NWs decreased after implantation. • The electrical conduction improved due to dominance of ionization effects. - Abstract: For II–VI compound semiconductor nanostructures, ion implantation is considered to be an area of significant interest due to its potential use in the fabrication of the extensive variety of novel optoelectric devices. CdSe nanowires with diameter 80 nm have been grown via the template-assisted electro-deposition method and were subsequently implanted with 200 keV negative phosphorous ions at fluence ranging from 10{sup 11} ions/cm{sup 2} to 10{sup 13} ions/cm{sup 2}. SRIM-TRIM simulation studies are done to understand the course and nature of events occurring during implantation. Pre- and post-implanted samples were characterized by Scanning electron microscope (SEM), X-Ray diffraction (XRD), UV–vis spectroscopy and Probe station with a Keithley source meter. Structural studies reveal no modification in crystal structure upon implantation. An increase of phosphorous content led to an apparent red shift in the optical band gap and an improvement in conductivity. These modifications are attributed to the ionization and the creation of damage on implantation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Industrial ion source technology

Plasma probe surveys were conducted in a 30-cm source to verify that the uniformity in the ion beam is the result of a corresponding uniformity in the discharge-chamber plasma. A 15 cm permanent magnet multipole ion source was designed, fabricated, and demonstrated. Procedures were investigated for texturing a variety of seed and surface materials for controlling secondary electron emission, increasing electron absorption of light, and improved attachment of biological tissue for medical implants using argon and tetrafluoromethane as the working gases. The cross section for argon-argon elastic collisions in the ion-beam energy range was calculated from interaction potentials and permits calculation of beam interaction effects that can determine system pumping requirements. The data also indicate that different optimizations of ion-beam machines will be advantageous for long and short runs, with 1 mA-hr/cm being the rough dividing line for run length. The capacity to simultaneously optimize components in an ion-beam machine for a single application, a capacity that is not evident in competitive approaches such as diode sputtering is emphasized.

Kaufman, H. R.↗

Ion Number Density Quantification Utilizing Pulsing Frequency in Negative Differential Resistance (NDR) Regime of Microplasma Operation

A mathematical model is presented for quantifying the ion number density over a range of discharge current in microplasma discharges. The ion number density is determined from measured discharge voltage, current, pulsing frequency, and trace impurity that is injected into the system deliberately. Experiments are conducted in pure helium with nitrogen being introduced as the trace species. The ion number density is estimated over a range of discharge current and is compared with multidimensional simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Amorphization and recrystallization of epitaxial ReSi2 films grown on Si(100)

The effects of implantation damage and the chemical species of the implant on structural and electrical properties of epitaxial ReSi2 films on Si(100) implanted with Si-28 or Ar-40 ions, at doses ranging from 10 to the 13th/sq cm to 10 to the 15th/sq cm, were investigated using the backscattering spectrometry, XRD, and the van der Pauw techniques. Results showed that ion implantation produces damage in the film, which increases monotonically with dose; the resistivity of the film decreases monotonically with dose.

Kim, Kun HO↗