Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inelasticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Scattering of 4.5 eV electrons by ground /x 3 Sigma g minus/ state and metastable /a 1 Delta g/ oxygen molecules

The paper reports on differential and integral cross sections for scattering of 4.5 eV electrons by ground state (x 3 Sigma g minus) and metastable (a 1 Delta g) oxygen molecules in the -2.0 eV to plus 2.0 eV energy loss range. The cross section for the (a 1 Delta g to b 1 Sigma g plus) transition was found to be more than an order of magnitude larger than that of the excitation of the b state from the ground state. It was found that the principle of detailed balance can be applied to the rotationally unresolved inelastic and superelastic electronic transitions between the (x 3 Sigma g minus) and (a 1 Delta g) states, which indicates that for this transition one may neglect the very different rotational level structure of the two states in estimating superelastic cross section from inelastic data to an accuracy of about 15 per cent.

Hall, R. I.↗
NASA NTRS1976

The electron Boltzmann equation in a plasma generated by fission fragments

A Boltzmann equation formulation is presented for the determination of the electron distribution function in a plasma generated by fission fragments. The formulation takes into consideration ambipolar diffusion, elastic and inelastic collisions, recombination and ionization, and allows for the fact that the primary electrons are not monoenergetic. Calculations for He in a tube coated with fissionable material show that, over a wide pressure and neutron flux range, the distribution function is non-Maxwellian, but the electrons are essentially thermal. Moreover, about a third of the energy of the primary electrons is transferred into the inelastic levels of He. This fraction of energy transfer is almost independent of pressure and neutron flux but increases sharply in the presence of a sustainer electric field.

Hassan, H. A.↗
NASA NTRS1977

Strain partitioning of three alloys in ultrahigh vacuum using the step stress method

The ultrahigh vacuum strain controlled thermal-mechanical strain cycling fatigue behavior of ASTAR 811C, 304 stainless steel and A-286 was studied. The step stress procedure of experimental strainrange partitioning was utilized to partition the inelastic strainranges for tests duplicating conditionings previously reported by TRW. An analytical method is described in which these partitioned inelastic strainrange data can be used to develop the four basic life relationships for these materials.

Kortovich, C. S.↗
NASA NTRS1976

Electron distribution function in a plasma generated by fission fragments

A Boltzmann equation formulation is presented for the determination of the electron distribution function in a plasma generated by fission fragments. The formulation takes into consideration ambipolar diffusion, elastic and inelastic collisions, recombination and ionization, and allows for the fact that the primary electrons are not monoenergetic. Calculations for He in a tube coated with fissionable material shows that, over a wide pressure and neutron flux range, the distribution function is non-Maxwellian, but the electrons are essentially thermal. Moreover, about a third of the energy of the primary electrons is transferred into the inelastic levels of He. This fraction of energy transfer is almost independent of pressure and neutron flux.

Hassan, H. A.↗
NASA NTRS1977

Electron-impact excitation of the low-lying electronic states of HCN

The first study of the low-energy electron-impact excitation of low-lying electronic transitions in the HCN molecule is reported. Measurements were made at incident electron energies of 11.6 and 21.6 eV in the energy-loss range of 3-10 eV, and at scattering angles of 20-130 deg. Inelastic scattering spectra were placed on the absolute cross-section scale by determining first the ratio of inelastic-to-elastic scattering cross sections, and then separately measuring the absolute elastic scattering cross section. Several new electronic transitions are observed which are intrinsically overlapped in the molecule itself. Assignments of these electronic transitions are suggested. These assignments are based on present spectroscopic and cross-sections measurements, high-energy electron scattering spectra, optical absorption spectra, and ab initio molecular orbital calculations.

Chutjian, A.↗
NASA NTRS1978

A note on the problem of jet stream formation

It is noted that the formation of 'jet streams', or narrow ringlike structures of small particles, in early planetary and satellite systems cannot result solely from inelastic collisions among the small particles. The possibility is considered that gravitational encounters between the particles will perturb them into more eccentric orbits and thus maintain the orbital coupling between particles (or jet streams) in neighboring orbits. It is found that when the gravitational effect of the particles is taken into account, the average eccentricity of the particles increases as agglomeration due to inelastic collisions proceeds. With respect to jet-stream formation, it is suggested that the ever-increasing orbital eccentricity of the particles will aid in coupling together the different 'sub-jet streams', so that large-scale orbital focusing toward the center of the whole system can continue. Alternative mechanisms leading to planetary accretion are briefly discussed.

Ip, W.-H.↗
NASA NTRS1979

Underwater seismic source

Apparatus for generating a substantially oscillation-free seismic signal for use in underwater petroleum exploration, including a bag with walls that are flexible but substantially inelastic, and a pressured gas supply for rapidly expanding the bag to its fully expanded condition is described. The inelasticity of the bag permits the application of high pressure gas to rapidly expand it to full size, without requiring a venting mechanism to decrease the pressure as the bag approaches a predetermined size to avoid breaking of the bag.

Yang, L. C.↗
NASA NTRS1980

Wear particles of single-crystal silicon carbide in vacuum

Sliding friction experiments, conducted in vacuum with silicon carbide /000/ surface in contact with iron based binary alloys are described. Multiangular and spherical wear particles of silicon carbide are observed as a result of multipass sliding. The multiangular particles are produced by primary and secondary cracking of cleavage planes /000/, /10(-1)0/, and /11(-2)0/ under the Hertzian stress field or local inelastic deformation zone. The spherical particles may be produced by two mechanisms: (1) a penny shaped fracture along the circular stress trajectories under the local inelastic deformation zone, and (2) attrition of wear particles.

Miyoshi, K.↗
NASA NTRS1979

DUMAND Summer Workshop, University of California, La Jolla, Calif., July 24-September 2, 1978, Proceedings. Volume 2 - UHE interactions, neutrino astronomy

The volume covers categories on inelastic neutrino scattering and the W-boson, and other ultra-high-energy processes, on pulsars, quasars and galactic nuclei, as well as other point sources and constants from gamma ray astronomy. Individual subjects include weak intermediate vector bosons and DUMAND, the Monte Carlo simulation of inelastic neutrino scattering in DUMAND, and Higgs boson production by very high-energy neutrinos. The observability of the neutrino flux from the inner region of the galactic disk, the diffuse fluxes of high-energy neutrinos, as well as the significance of gamma ray observations for neutrino astronomy are also among the topics covered.

Roberts, A.↗
NASA NTRS1981

Effects of gamma-ray, neutrino, and particle production on the energetics and dynamics of compact extragalactic radio sources

Consideration is given to particle production and high-energy radiation within apparently superluminal radio components of extragalactic radio sources forming within the apparent region of nuclear activity of a quasar or active galaxy. The physical conditions in compact components observed as radio emitters are derived for the quasars 3C 273 and 3C 345 and extrapolated to those of initial components of sizes on the order of 10 to the 15th cm on the basis of two-dimensional relativistic jet and relativistic three-dimensional models of component expansion. Probabilities that a given particle avoids an inelastic collision in the relativistic plasma are calculated for both cases which show that collisions which produce particles and radiation may be very important during the formation of a compact radio component. The consequences of electron-positron production, bremsstrahlung and proton-proton inelastic collisions ultimately giving rise to neutrinos and gamma rays for the development and energetics of the radio component are then examined, and upper limits to the amount of energy which can be channeled into radio components from an active region without giving rise to a high-energy X-ray source are derived.

Vestrand, W. T.↗
NASA NTRS1981

The generation and morphology of single-crystal silicon carbide wear particles under adhesive conditions

Sliding friction experiments were performed in vacuum at room temperature on a plane-type SiC surface in contact with iron-based binary alloys. Multiangular and spherical wear particles were found to form as a result of multipass sliding. The multiangular particles were produced by primary and secondary cracking of the 0001, 10(-)10, and 11(-)20 plane-type cleavage planes under the Hertzian stress field or local inelastic deformation zone. When alloy surfaces are in contact with silicon carbide under a load of 0.2 N, the alloy around the contact area is subjected to stresses that are close to the elastic limit in the elastic deformation region and/or exceed it. It was also found that spherical wear particles may be produced by two mechanisms: a penny-shaped fracture along the circular stress trajectories under the local inelastic deformation zone, and the attrition and fatigue of wear particles.

Miyoshi, K.↗
NASA NTRS1981

Fragmentation of Fe nuclei on carbon, hydrogen and CH2 targets. I - Individual charge changing and total cross sections. II - Isotopic cross sections

The fragmentation of Fe nuclei in carbon and CH2 targets at energies of 650, 800, and 950 MeV/nuc has been studied. Direct measurements of the interaction between Fe nuclei and the carbon and CH2 targets were carried out. The Fe to H charge changing cross sections derived for selected nuclei showed a clear energy dependence, consistent with the results of Westfall et al. (1979). Values for the total inelastic cross section Fe to H charge changing were obtained by two methods: the first method involved subtracting the total CH2 and C cross sections (values of 703 plus or minus 9 mb and 65 plus or minus 10 mb at 950 MeV/nuc and 650 MeV/nuc, respectively were obtained). The same cross sections were obtained by adding the individual charge changing cross sections. A cross section for Fe to fragment into lower mass Fe isotopes of 65 plus or minus 5 mb was also observed, giving total inelastic mass changing cross sections of 768 plus or minus 11 mb and 716 plus or minus 12 mb, respectively. In addition, the individual isotopic cross sections for Z equals 16-25 are reported.

Brautigam, D. A.↗
NASA NTRS1982

Experimental electron energy-loss spectra and cross sections for the 4/2/S - 4/2/P transition in Zn II

Electron energy-loss spectra and differential cross sections are reported for inelastic scattering from Zn II. Measurements were carried out in a crossed electron beam-ion beam apparatus, at incident electron energies of 30, 40, 50, 60, 75, 85, and 100 eV, and at a scattering angle of 14 deg. The present results are the first reported measurements of inelastic electron scattering from an ion.

Chutjian, A.↗
NASA NTRS1983

Development of a simplified analytical method for representing material cyclic response

Development of a simplified method for estimating structural inelastic stress and strain response to cyclic thermal loading is presented. The method assumes that high temperature structural response is the sum of time independent plastic and time dependent elastic/creep components. The local structural stress and strain response predicted by linear elastic analysis is modified by the simplified method to predict the inelastic response. The results with simulations by a nonlinear finite element analysis and used time independent plasticity and unified time dependent material model are compared.

Moreno, V.↗
NASA NTRS1983

Constitutive Equations for Use in Design Analyses of Long-life Elevated Temperature Components

Design analysis needs and procedures relative to elevated temperature components in liquid metal fast breeder reactor (LMFBR) system were examined. The effects of the thermal transients on the pressure boundary components are enhanced by the excellent heat transfer properties of the liquid sodium coolant. Design criteria for high temperature nuclear reactor components recognize the potential occurrence of inelastic structural response. Specifically, criteria and limits were developed which reflect a recognition of this potential and employ design by analysis concepts that requires that inelastic (elastic-plastic and creep) analyses be performed. Constitutive equations to represent multiaxial time-dependent responses of LMFBR alloys are established. The development of equations applicable under cyclic loading conditions are outlined.

Pugh, C. E.↗
NASA NTRS1984

Nuclear processes in the jets of SS433

The very narrow gamma-ray lines observed at 1.495 and 6.695 MeV from SS433 which are blueshifted 1.369 and 6.129 emissions from deexcitations of (24)Mg* and (16)O* in grains moving with the jets and inelastically excited by interactions with the ambient medium are discussed. Energetic particle interactions in grains produce very narrow gamma ray lines from deexcitation of nuclear levels whose lifetimes are long enough that the excited nuclei stop before deexcitation. The presence of grains in the jets resolves hitherto discussed difficulties of inelastic excitation models for gamma ray production in SS433, the very narrow widths of the observed lines and the absence of other strong lines, expected from abundant elements. A model is proposed which could be distinguished from a previously proposed fusion model by gamma ray line observations.

Ramaty, R.↗
NASA NTRS1984

Three-dimensional Stress Analysis Using the Boundary Element Method

The boundary element method is to be extended (as part of the NASA Inelastic Analysis Methods program) to the three-dimensional stress analysis of gas turbine engine hot section components. The analytical basis of the method (as developed in elasticity) is outlined, its numerical implementation is summarized, and the approaches to be followed in extending the method to include inelastic material response indicated.

Wilson, R. B.↗
NASA NTRS1984

Nuclear processes in the jets of SS 433

The very narrow gamma-ray lines observed at 1.495 and 6.695 MeV from SS 433 which are blueshifted 1.369 and 6.129 emissions from deexcitations of (24)Mg-asterisk and (16)O-asterisk in grains moving with the jets and inelastically excited by interactions with the ambient medium are discussed. Energetic particle interactions in grains produce very narrow gamma ray lines from deexcitation of nuclear levels whose lifetimes are long enough that the excited nuclei stop before deexcitation. The presence of grains in the jets resolves hitherto discussed difficulties of inelastic excitation models for gamma ray production in SS 433, the very narrow widths of the observed lines and the absence of other strong lines, expected from abundant elements. A model is proposed which could be distinguished from a previously proposed fusion model by gamma ray line observations.

Ramaty, R.↗