Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Constraints on Mechanisms of Chondrule Formation from Chondrule Precursors and Chronology of Transient Heating Events in the Protoplanetary Disk

The mineralogy, petrography, and oxygen-isotope compositions of porphyritic chondrules—dominant chondrule type in most chondrite groups—suggest formation by incomplete melting of isotopically diverse precursors during localized transient heating events in dust-rich regions of the protoplanetary disk characterized by 16O-poor compositions (D17Odust+gas~ –7‰ to +4‰) relative to the inferred Sun’s value (D17O ~ –28 ± 2‰). The chondrule precursors included Ca,Al-rich inclusions (CAIs), amoeboid olivine aggregates (AOAs), chondrules of earlier generations, fine-grained matrix-like material, and possibly fragments of pre-existing planetesimals. Like porphyritic chondrules, igneous CAIs formed by melting of isotopically diverse precursors during transient heating events, but in an isotopically distinct, solar-like reservoir of the protoplanetary disk (D17O dust + gas ~ –24‰), probably near the proto Sun. Based on a narrow range of the initial 26Al/27Alratios inferred from the internal Al-Mg isochrons in igneous CAIs, their melting started at the very beginning of Solar System formation (t0), defined by the CV CAIs with U-corrected Pb-Pb age of 4567.3 ± 0.16 Ma and the canonical 26Al/27Al ratio of (5.25 ± 0.02) ¥ 10–5, and lasted at least 0.3 Ma. The U-corrected Pb-Pb absolute and 26Al-26Mg relative ages of porphyritic chondrules from type 3 ordinary, CO, CV, and CR carbonaceous chondrites (assuming uniform distribution of 26Al in the disk at the canonical level) suggest chondrule formation started at t0 and lasted for about 4 Ma. These observations may preclude formation of the majority of porphyritic chondrules by splashing of differentiated planetesimals and by collisions between planetesimals; instead, they are consistent with melting of dust balls by bow shocks or magnetized turbulence in the disk. Some porphyritic chondrules in equilibrated (petrologic type 4–6) ordinary chondrites contain relict fragments of coarse-grained chromite, ilmenite, phosphates, and albitic plagioclase. The similar mineral assemblage is commonly observed in type 4–6 ordinary chondrites, but is absent in type 3 chondrites, suggesting these chondrules formed by incomplete melting of thermally metamorphosed ordinary chondrite material, possibly by impacts. The CB metal-rich carbonaceous chondrites contain exclusively magnesian non-porphyritic chondrules crystallized from complete melts. These chondrules formed in a gas-melt plume generated by a hypervelocity (≥20 km/s) collision between planetesimals ~4.8 Ma after t0 in a transition or a debris disk. One of the colliding bodies was probably differentiated. The CH metal-rich carbonaceous chondrites contain chondrules formed by different mechanisms. The magnesian non-porphyritic chondrules formed in the CB impact plume ~4.8 Ma after t0. The chemically diverse (magnesian, ferroan, and Al-rich) porphyritic chondrules formed by incomplete melting of isotopically diverse precursors in the protoplanetary disk, most likely prior the CB impact plume event. We conclude that there are multiple mechanisms of chondrule formation that operated over the entire life-time of the disk.

Chondrules↗
NASA NTRS1962

SIMULATION EQUIPMENT USED IN THE TRAINING OF ASTRONAUTS AND FLIGHT CONTROL CREWS IN PROJECT MERCURY

At the beginning of the Mercury Program it was realized that the entire preparation of the man for piloting the spacecraft would have to be done by use of simulation techniques. It was also realized that no single all-inclusive flight simulator could provide the astronaut with practice in all phases of the mission in a sufficiently realistic environment. To determine the simulation needs, the Mercury-Atlas flight was broken down into areas of astronaut mission responsibility and into areas of physiological and psychological factors affecting the astronaut. A study was made of existing and proposed devices to determine requirements, suitability, feasibility, and availability of these devices. The simulators and devices finally selected are listed in Figure 1. Omitted from this list are several devices that are not actually simulators, such as mockups and visual devices} disorientation devices such as the one at Pensacola, and airplane 0 g familiarization flights. The listings in Figure 1 are not by order of importance or time availability but rather in groupings of fixed-based and dynamic or moving-based simulators.

Training equipment↗
NASA NTRS1962

Collected Papers on Instability of Shell Structures - 1962

Shell structures are important components of airplanes, missiles, and space vehicles, but present capabilities for predicting the local and general instability of many such structures are inadequate. A large effort continues to be devoted to the stability analysis of shell structures, and considerable progress has been made. Results are slowly disseminated, however, and many engaged in research are not fully cognizant of the problems and practices of the vehicle designers who utilize research results. Therefore, an NASA SYMPOSIUM ON INSTABILITY OF SKELL STRUCTURES was organized by the Langley Research Center with sessions held there on October 24 and 25, 1962. Participants were limited to persons contributing papers and to certain officials of the U.S. Government. This symposium was planned to provide those persons concerned with shell instability at research laboratories, at educational institutions, and in the aerospace industry with a comprehensive view of the present state of the art, including the voids in present knowledge, important current problems, and the most fruitful directions for future theoretical and experimental research on the instability of all types of shell structures. Individuals actively engaged in research on shell stability or design were invited to contribute written papers for inclusion in a compilation to be distributed to the participants prior to the symposium. A few papers were selected by a steering committee for oral presentation at the symposium. Provision was made, also, for a discussion of all papers.

MISSILE↗
NASA NTRS1963

STUDIES IN GRANULAR MECHANICS - I

Elastic behavior of nonadhesive rubber binder close-packed with rigid spherical particulate inclusions - mathematical model for simple tension

PARTICLE↗
NASA NTRS1949

Experimental Study of Gas-Flow Separation in Overexpanded Exhaust Nozzles for Rocket Motors

In a rocket motor having a de Laval nozzle with a fixed expansion ratio, there is only one pressure ratio (p(sub c)/p(sub o)) for which this expansion ratio is correct. At any other pressure ratio the gases will be either underexpanded or overexpanded, depending on whether the pressure ratio is higher or lower than the correct value. Rocket motor flame patterns illustrating the four possible regimes are shown in Figures 1 to 4, inclusive. In Figure 1, the pressure ratio is higher than the correct one for the fixed expansion ratio of the nozzle, resulting in underexpansion of the gases. in Figure 2, the pressure ratio is the correct one. In Figure 3, the pressure ratio is only slightly lower than the correct one, resulting in overexpansion without separation of the gases from the wall. In Figure 4, the pressure ratio is considerably below the correct one, resulting in overexpansion with separation of the gases from the nozzle wall. The present report is concerned primarily with this fourth type of flow, that is, overexpansion of the gases with separation of the flow from the wall. Such a situation exists in a rocket motor operating at a considerably lower altitude than that for which its exhaust nozzle was designed.

Cowles, Frederick B.↗
NASA NTRS1960

Aerospace medicine and biology. an annotated bibliography, 1954 literature, volume iii

While this third volume of the bibliography was in preparation, a number of changes and new developments took place which, it is hoped, will be instrumental in furthering the bibliography's main objective: to provide as rapidly as possible comprehensive coverage of the aerospace-medical and bio-astronautical literature. To begin with, it will be noted that the title of the compilation has been changed from Aviation Medicine to Aerospace Medicine and Biology. This will bring into relief the fact that the general subject scope of the bibliography has been expanded to include new areas of interest in space-medical and space-biological research. Thus, to the subject fields heretofore covered by the bibliography (a full listing of which may be found in the Preface to Volume 2) new ones have been added, such as Biological Rhythms, Biological Orientation, Closed Ecological Systems, Physiological and Psychological Effects of Heat, Cold, Isolation, Restraint, and many others. Another important change was administrative in nature. Sponsorship of the bibliography for the fiscal year 1959/60 was taken over by the U. S. Advanced Research Project Agency (ARPA), the U. S. Aeronautics and Space Administration (NASA), and the Defense Research Board of Canada. Under a substantially increased budget, the Library of Congress was enabled to produce two volumes during the fiscal year. The Library also agreed to prepare selected abstracts from the current aerospace and bio-astronautic literature, which are published monthly in Aerospace Medicine, the official organ of the Aerospace Medical Association.*) If the present rate of production can be maintained, it will be possible to bring the bibliography up to date within about three years. In format, style, and arrangement, this volume follows closely the preceding ones. References are arranged alphabetically by author; abstracts are informative; and full bibliographic information is provided, including foreign and translated titles, volume and issue numbers, place of publication (if foreign), inclusive paging, full dates, and library call numbers or other location symbols. While the bulk of the publication is devoted to journal articles, reports, and monographs published during the year 1954, items published in 1952 or 1953 not included in the preceding volumes have been incorporated in this volume. For quick identification, the publication years of these off-year references have been printed next to the first author's name. As before, cumulated corporate and secondary author and subject indexes are included, the latter being revised and enlarged considerably, in keeping with the over-all expansion of subject scope.

Aerospace medicine↗
NASA NTRS1967

Soil mechanics surface sampler - Lunar surface test and results

After the success of Surveyor I in meeting the objectives of the engineering flight series, selection from among candidate experiments led to the inclusion of the Soil Mechanics Surface Sampler (SMSS) on the payload. Though originally planned for later Surveyors, the SMSS design was modified to fit the reduced telemetry and commanding capability of the earlier spacecraft. These modifications included removal of the strain-, acceleration-, and position-measuring systems originally planned, and incorporation of a means for measuring current drawn by the motors during operation. A description of the modified device, its performance on Surveyor III, and some conclusions regarding the lunar surface material drawn from the experiment are presented.

Ground test↗
NASA NTRS1968

Evaluation of methods for nondestructive testing of brazed joints

Evaluation of nondestructive methods of testing brazed joints reveals that ultrasonic testing is effective in the detection of nonbonds in diffusion bonded samples. Radiography provides excellent resolutions of void or inclusion defects, and the neutron radiographic technique shows particular advantage for brazing materials containing cadmium.

Kanno, A.↗