Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Changes in Iron, Sulfur, and Arsenic Speciation Associated with Bacterial Sulfate Reduction in Ferrihydrite-Rich Systems

Biologically mediated redox processes have been shown to affect the mobility of iron oxide-bound arsenic in reducing aquifers. This work investigates how dissimilatory sulfate reduction and secondary iron reduction affect sulfur, iron, and arsenic speciation. Incubation experiments were conducted with As(III/V)-bearing ferrihydrite in carbonate-buffered artificial groundwater enriched with lactate (10 mM) and sulfate (0.08-10 mM) and inoculated with Desulfovibrio vulgaris (ATCC 7757, formerly D. desulfuricans), which reduces sulfate but not iron or arsenic. Sulfidization of ferrihydrite led to formation of magnetite, elemental sulfur, and trace iron sulfides. Observed reaction rates imply that the majority of sulfide is recycled to sulfate, promoting microbial sulfate reduction in low-sulfate systems. Despite dramatic changes in Fe and S speciation, and minimal formation of Fe or As sulfides, most As remained in the solid phase. Arsenic was not solubilized in As(V)-loaded incubations, which experienced slow As reduction by sulfide, whereas As(III)-loaded incubations showed limited and transient As release associated with iron remineralization. This suggests that As(III) production is critical to As release under reducing conditions, with sulfate reduction alone unlikely to release As. These data also suggest that bacterial reduction of As(V) is necessary for As sequestration in sulfides, even where sulfate reduction is active.

54 ENVIRONMENTAL SCIENCES↗

Galvanomagnetic properties and electronic structure of iron-doped PbTe

We synthesize an iron-doped PbTe single-crystal ingot and investigate the phase composition and distribution of the iron impurity along the ingot as well as galvanomagnetic properties in weak magnetic fields (4.2 K ≤ T ≤ 300 K, B ≤ 0.07 T) of Pb{sub 1−y}Fe{sub y}Te alloys. We find microscopic inclusions enriched with iron and regions with a chemical composition close to FeTe in the heavily doped samples, while the iron impurity content in the main phase rises only slightly along the length of the ingot reaching the impurity solubility limit at approximately 0.6 mol. %. Samples from the initial and the middle parts of the ingot are characterized by p-type metal conductivity. An increase of the iron impurity content leads to a decrease in the free hole concentration and to a stabilization of galvanomagnetic parameters due to the pinning of the Fermi level by the iron resonant impurity level E{sub Fe} lying under the bottom of the valence band (E{sub v} − E{sub Fe} ≈ 16 meV). In the samples from the end of the ingot, a p-n inversion of the conductivity type and an increase of the free electron concentration along the ingot are revealed despite the impurity solubility limit being reached. The kinetics of changes of charge carrier concentration and of the Fermi energy along the ingot is analyzed in the framework of the six-band Dimmock dispersion relation. A model is proposed for the electronic structure rearrangement of Pb{sub 1−y}Fe{sub y}Te with doping, which may also be used for PbTe doped with other transition metals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NEAr Transporter (NEAT) Domains: Unique Surface Displayed Heme Chaperones That Enable Gram-Positive Bacteria to Capture Heme-Iron From Hemoglobin

Iron is an important micronutrient that is required by bacteria to proliferate and to cause disease. Many bacterial pathogens forage iron from human hemoglobin (Hb) during infections, which contains this metal within heme (iron–protoporphyrin IX). Several clinically important pathogenic species within the Firmicutes phylum scavenge heme using surface-displayed or secreted NEAr Transporter (NEAT) domains. In this review, we discuss how these versatile proteins function in the Staphylococcus aureus Iron-regulated surface determinant system that scavenges heme-iron from Hb. S. aureus NEAT domains function as either Hb receptors or as heme-binding chaperones. In vitro studies have shown that heme-binding NEAT domains can rapidly exchange heme amongst one another via transiently forming transfer complexes, leading to the interesting hypothesis that they may form a protein-wire within the peptidoglycan layer through which heme flows from the microbial surface to the membrane. In Hb receptors, recent studies have revealed how dedicated heme- and Hb-binding NEAT domains function synergistically to extract Hb’s heme molecules, and how receptor binding to the Hb-haptoglobin complex may block its clearance by macrophages, prolonging microbial access to Hb’s iron. The functions of NEAT domains in other Gram-positive bacteria are also reviewed.

59 BASIC BIOLOGICAL SCIENCES↗

Electronic environments of ferrous iron in rhyolitic and basaltic glasses at high pressure: Silicate Glasses at High Pressure

The physical properties of silicate melts within Earth's mantle affect the chemical and thermal evolution of its interior. Chemistry and coordination environments affect such properties. We have measured the hyperfine parameters of iron-bearing rhyolitic and basaltic glasses up to ~120 GPa and ~100 GPa, respectively, in a neon pressure medium using time domain synchrotron Mössbauer spectroscopy. The spectra for rhyolitic and basaltic glasses are well explained by three high-spin Fe 2+ -like sites with distinct quadrupole splittings. Absence of detectable ferric iron was confirmed with optical absorption spectroscopy. The sites with relatively high and intermediate quadrupole splittings are likely a result of fivefold and sixfold coordination environments of ferrous iron that transition to higher coordination with increasing pressure. The ferrous site with a relatively low quadrupole splitting and isomer shift at low pressures may be related to a fourfold or a second fivefold ferrous iron site, which transitions to higher coordination in basaltic glass, but likely remains in low coordination in rhyolitic glass. These results indicate that iron experiences changes in its coordination environment with increasing pressure without undergoing a high-spin to low-spin transition. We compare our results to the hyperfine parameters of silicate glasses of different compositions. With the assumption that coordination environments in silicate glasses may serve as a good indicator for those in a melt, this study suggests that ferrous iron in chemically complex silicate melts likely exists in a high-spin state throughout most of Earth's mantle.

58 GEOSCIENCES↗

Engineering of Ruthenium-Iron Oxide Colloidal Heterostructures: Improved Yields in CO 2 Hydrogenation to Hydrocarbons

Catalytic CO 2 reduction to fuels and chemicals is a major pursuit in reducing greenhouse gas emissions. Here, one approach utilizes the reverse water–gas shift reaction, followed by Fischer–Tropsch synthesis, and iron is a well–known candidate for this process. Some attempts have been made to modify and improve its reactivity, but resulted in limited success. Now, using ruthenium–iron oxide colloidal heterodimers, close contact between the two phases promotes the reduction of iron oxide via a proximal hydrogen spillover effect, leading to the formation of ruthenium–iron core–shell structures active for the reaction at significantly lower temperatures than in bare iron catalysts. Furthermore, by engineering the iron oxide shell thickness, a fourfold increase in hydrocarbon yield is achieved compared to the heterodimers. This work shows how rational design of colloidal heterostructures can result in materials with significantly improved catalytic performance in CO 2 conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Environmental controls on the kinetics of iron-sulfur cluster nucleation and nanoparticle formation

Anoxic, sulfidic conditions have been prevalent since the early Proterozoic and favor aqueous iron-sulfur (FeS aq ) clusters as a major fraction of the soluble, reduced iron and sulfur pool. FeS aq cluster formation and nucleation is driven by the high affinity between ferrous iron (Fe(II)) and sulfide (HS − ), ultimately yielding particles that precipitate as iron sulfide minerals. FeS aq clusters were recently shown to be bioavailable sources of iron and sulfur for a variety of anaerobes, yet little is known of the factors that influence the kinetics of their formation and nucleation. Here we apply computational and spectroscopic approaches to investigate the dynamics of FeS aq nucleation, cluster growth, precipitation, and redissolution as a function of Fe(II)/HS − concentration, temperature, and pH. Experiments were conducted under excess HS − to mimic euxinic conditions common to contemporary anaerobic aquatic ecosystems and those of the Proterozoic. Density functional theory calculations reveal the key role of water oxygen-iron interactions in stabilizing small FeS aq clusters and promoting solubility. Dynamic light scattering revealed a concentration-dependent increase in the kinetics of FeS aq nucleation and cluster aggregation. Increasing temperature promoted FeS aq cluster nucleation and aggregation while also enhancing dissolution. Alkaline pH also promoted FeS aq nucleation and cluster aggregation. At 25 °C, pH 7.0, and at reactant concentrations of 30 µM, FeS aq clusters < 10 nm in diameter remained in solution for > 2 h. These results underscore the importance of temperature, pH, and reactant concentration in the kinetics of FeS aq nucleation and cluster growth that, in turn, influence their bioavailability in anaerobic ecosystems.

Aquatic ecosystems↗

Effect of Iron and Carbonation of the Diffusion of Iodine and Rhenium in Waste Encasement Concrete and Soil Fill Material under Hydraulically Unsaturated Conditions

Assessing long-term performance of Category 3 cement wasteforms and accurate prediction for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e. sorption or precipitation). A set of sediment-concrete half-cell diffusion experiments was conducted under unsaturated conditions (4% and 7% by weight moisture content) using carbonated and non-carbonated concrete-soil half-cells. Results indicate the behavior of rhenium and iodine release was comparable within a given half-cell test. Diffusivity in soil is a function of moisture content; a 3% increase in moisture content affords a one to two order of magnitude increase in diffusivity. Release of iodine and rhenium was 1 to 3 orders of magnitude less from non-carbonated, relative to carbonated, concrete monoliths. Inclusion of iron in non-carbonate monoliths resulted in the lowest concrete diffusivity values for both iodine and rhenium. This suggests that in the presence of iron, iodine and rhenium are converted to reduced species, which are less soluble and better retained within the concrete monolith. The release of iodine and rhenium was greatest from iron-bearing, carbonated concrete monoliths, suggesting carbonation negates the effect of iron on the retention of iodine and rhenium within concrete monoliths. This is likely due to enhanced formation of microcracks in the presence of iron, which provide preferential paths for contaminant migration. Although the release of iodine and rhenium were greatest from carbonated concrete monoliths containing iron, the migration of iodine and rhenium within a given half-cell is dependent on the moisture content, soil diffusivity, and diffusing species.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanical and physical properties of inorganic polymer cement made of iron-rich laterite and lateritic clay: A comparative study

In this work, two different laterites (iron contents of 13.07 and 49.34 wt%, respectively, for lateritic clay, LAC, and iron-rich laterite, LAI) were selected and calcined at 600 °C. The obtained calcined laterites, namely LAI600 and LAC600, were separately mixed with an alkaline solution (silicate modulus of 1.35) or an acidic solution (phosphoric acid solution at pH ≤ 2) for the synthesis of inorganic polymer products. The fabricated products were cured at 20 °C (ambient) and 40 °C (oven). The obtained results showed that the compressive strength of each series of alkaline-based inorganic polymer binder increased with ageing time (7 and 28 days) for room temperature curing, while the reverse trend was noted for oven-cured specimens. The best mechanical performance was obtained when using a phosphoric acid solution, 38 and 52 ± 1 MPa; 62 and 65 ± 1 MPa at 28 days for LAC and LAI respectively. It appeared that a higher iron content within the laterite contributed to an increase in the compressive strength under acidic conditions (LAI (59 MPa) > LAC (48 MPa)) compared to the behavior obtained under alkaline conditions (LAI (6 MPa) < LAC (29 MPa)). Accordingly, the acidic products exhibited a dense structure (with lower porosity) and contained amorphous iron/aluminium phosphate phases such as berlinite (FePO{sub 4}), iron hydrogen phosphate hydrate (Fe{sub 3}H{sub 15}(PO{sub 4}){sub 8·}4H{sub 2}O), ferrowyllieite (AlFe{sub 2}Na{sub 2}(PO{sub 4}){sub 3}) and sodium iron phosphate (Na{sub 3}Fe{sub 2}(PO{sub 4}){sub 3}) arising from the alteration of iron minerals in an acidic medium, confirmed by Mössbauer spectroscopy and electron paramagnetic resonance spectroscopy.

36 MATERIALS SCIENCE↗

Geometrical and magnetic structure of iron oxide clusters (FeO) n for n > 10

The structure and properties of stoichiometric iron oxide clusters (FeO) n are computed using all-electron density functional theory (DFT) for n > 10. The structures of (FeO) 11 , (FeO) 13 , (FeO) 14 , (FeO) 15 , and (FeO) 16 clusters are reported for the first time. Their lowest total energy states are found to possess spin multiplicities of 5, 5, 47, 27, and 15, respectively. The geometrical structure of the lowest total energy state of a (FeO) n cluster corresponds to chemisorption of oxygen atoms on the surface of the corresponding unary Fen cluster when n > 12. Computed properties of the iron oxide clusters are compared to the properties of the corresponding bare iron clusters. The average binding energy per atom of a (FeO) n cluster is substantially larger than that of Fen at all n. Surprisingly, the values of both polarizability and binding energy per atom of the iron oxide clusters change insignificantly when n increases from two to 16. In order to compare the performance of DFT methods in the iron and iron oxide series, the states of Fe 8 and (FeO) 8 were computed using five exchange–correlation functionals in the whole range of possible spin multiplicities. In conclusion, it is found that the results of computations of the (FeO) 8 cluster are more sensitive to the choice of a DFT functional than those of the Fe 8 cluster.

36 MATERIALS SCIENCE↗

Low iron stores are related to higher blood concentrations of manganese, cobalt and cadmium in non-smoking, Norwegian women in the HUNT 2 study

Low iron (Fe) stores may influence absorption or transport of divalent metals in blood. To obtain more knowledge about such associations, the divalent metal ions cadmium (Cd), manganese (Mn), cobalt (Co), copper (Cu), zinc (Zn) and lead (Pb) and parameters of Fe metabolism (serum ferritin, haemoglobin (Hb) and transferrin) were investigated in 448 healthy, menstruating non-smoking women, age 20-55 years (mean 38 years), participating in the Norwegian HUNT 2 study. The study population was stratified for serum ferritin: 257 were iron-depleted (serum ferritin <12 {mu}g/L) and 84 had iron deficiency anaemia (serum ferritin <12 {mu}g/L and Hb<120 g/L). The low ferritin group had increased blood concentrations of Mn, Co and Cd but normal concentrations of Cu, Zn and Pb. In multiple regression models, ferritin emerged as the main determinant of Mn, Co and Cd (p<0.001), while no significant associations with Cu, Zn and Pb were found. Adjusted r{sup 2} for the models were 0.28, 0.48 and 0.34, respectively. Strong positive associations between blood concentrations of Mn, Co and Cd were observed, also when controlled for their common association with ferritin. Apart from these associations, the models showed no significant interactions between the six divalent metals studied. Very mild anaemia (110{<=}Hb<120 g/L) did not seem to have any effect independent of low ferritin. Approximately 26% of the women with iron deficiency anaemia had high concentrations of all of Mn, Co and Cd as opposed to 2.3% of iron-replete subjects. The results confirm that low serum ferritin may have an impact on body kinetics of certain divalent metal ions, but not all. Only a fraction of women with low iron status exhibited an increased blood concentration of divalent metals, providing indication of complexities in the body's handling of these metals.

60 APPLIED LIFE SCIENCES↗

Pd-Ag chronometry of IVA iron meteorites and the crystallization and cooling of a protoplanetary core

To constrain the timescales and processes involved in the crystallization and cooling of protoplanetary cores, we examined the Pd-Ag isotope systematics of the IVA iron meteorites Muonionalusta and Gibeon. A Pd-Ag isochron for Muonionalusta provides an initial 107 Pd/ 108 Pd = (2.57 ± 0.07) × 10 -5 . The three metal samples analyzed from Gibeon plot below the Muonionalusta isochron, but these samples also show significant effects of cosmic ray-induced neutron capture reactions, as is evident from 196 Pt excesses in the Gibeon samples. After correction for neutron capture effects on Ag isotopes, the Gibeon samples plot on the Muonionalusta isochron, indicating that these two IVA irons have indistinguishable initial 107 Pd/ 108 Pd. Collectively, the Pd-Ag data indicate cooling of the IVA core below Pd-Ag closure between 2.9 ± 0.4 Ma and 8.9 ± 0.6 Ma after CAI formation, where this age range reflects uncertainties in the initial 107 Pd/ 108 Pd ratios of the solar system, which in turn result from uncertainties in the Pb-Pb age of Muonionalusta. The Ag isotopic data indicate that the IVA core initially evolved with a modestly elevated Pd/Ag, but the low Ag concentrations measured for some metal samples indicate derivation from a source with much lower Ag contents and, hence, higher Pd/Ag. These contrasting observations can be reconciled if the IVA irons crystallized from an initially more Ag-rich core, followed by extraction of Fe-S melts during compaction of the nearly solidified core. Owing to its strong tendency to partition into Fe-S melts, Ag was removed from the IVA core during compaction, leading to the very low Ag concentration observed in metal samples of IVA irons. Alternatively, Ag was lost by evaporation from a still molten metallic body just prior to the onset of crystallization. The Pd-Ag isotopic data indicate that Muonionalusta cooled at >500 K/Ma through the Pd-Ag closure temperature of ~900 K, consistent with the rapid cooling inferred from metallographic cooling rates for IVA irons. Finally, combined, these observations are consistent with cooling of IVA irons in a metallic body with little or no silicate mantle.

58 GEOSCIENCES↗

Experimentally determined effects of olivine crystallization and melt titanium content on iron isotopic fractionation in planetary basalts

Olivine is the most abundant mantle mineral at depths relevant to oceanic crust production through melting. It is also a liquidus phase for a wide range of mafic and ultramafic magma compositions. We have experimentally investigated the effects of olivine crystallization and melt composition on the fractionation of Fe isotopes in igneous systems. To test whether there is a melt compositional control on Fe isotopic fractionation, we have conducted nuclear resonant inelastic X-ray scattering (NRIXS) measurements on a suite of synthetic glasses ranging from 0.4 to 16.3 wt.% TiO 2 . The resulting force constants are similar to those of the reduced ( f O 2 = IW) terrestrial basalt, andesite, and dacite glasses reported by Dauphas et al. (2014), indicating that there is no measurable effect of titanium composition on Fe isotopic fractionation in the investigated compositional range. We have also conducted olivine crystallization experiments and analyzed the Fe isotopic composition of the experimental olivines and glasses using solution MC-ICPMS. Olivine and glass separates from a given experimental charge have the same iron isotopic composition within error. This result is robust in both the high-Ti glass (Apollo 14 black) and low-Ti glass (Apollo 14 VLT) compositions, and at the two oxygen fugacities investigated (IW-1, IW+2). Additionally, we have determined that Fe loss in reducing one-atmosphere gas-mixing experiments occurs not only as loss to the Re wire container, but also as evaporative loss, and each mechanism of experimental Fe loss has an associated Fe isotopic fractionation. We apply our results to interpreting Fe isotopic variations in the lunar mare basalts and lunar dunite 72415-8. Our experimental results indicate that neither melt TiO 2 composition nor equilibrium olivine crystallization can explain the observed difference in the iron isotopic composition of the lunar mare basalts. Additionally, equilibrium iron isotopic fractionation between olivine and melt cannot account for the "light" iron isotopic composition of lunar dunite 72415-8, unless the melt from which it is crystallizing was already enriched in light iron isotopes. Here, our results support models of diffusive fractionation to explain the light iron isotopic compositions measured in olivine from a variety of rock types and reduced ( f O 2 = IW-1 to IW+2) igneous environments (e.g., lunar dunite and basalts, terrestrial peridotites and basalts, martian shergottites).

58 GEOSCIENCES↗

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl3 indicates remarkably high levels of surface-bound Fe (III) in number of Fe3þ ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl2 generally resulted with the oxidation of Fe (II)–Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.

36 MATERIALS SCIENCE↗

Synthesis of high intrinsic loss power aqueous ferrofluids of iron oxide nanoparticles by citric acid-assisted hydrothermal-reduction route

Monodispersed aqueous ferrofluids of iron oxide nanoparticle were synthesized by hydrothermal-reduction route. They were characterized by X-ray diffraction analysis, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy and dynamic light scattering. The results showed that certain concentrations of citric acid (CA) are required to obtain only magnetic iron oxides with mean particle sizes around 8 nm. CA acts as a modulator and reducing agent in iron oxide formation which controls nanoparticle size. The XRD, magnetic and heating measurements showed that the temperature and time of hydrothermal reaction can affect the magnetic properties of obtained ferrofluids. The synthesized ferrofluids were stable at pH 7. Their mean hydrodynamic size was around 80 nm with polydispersity index (PDI) of 0.158. The calculated intrinsic loss power (ILP) was 9.4 nHm{sup 2}/kg. So this clean and cheap route is an efficient way to synthesize high ILP aqueous ferrofluids applicable in magnetic hyperthermia. - Graphical abstract: Monodispersed aqueous ferrofluids of iron oxide nanoparticles were synthesized by hydrothermal-reduction method with citric acid as reductant which is an efficient way to synthesize aqueous ferrofluids applicable in magnetic hyperthermia. Highlights: Black-Right-Pointing-Pointer Aqueous iron oxide ferrofluids were synthesized by hydrothermal-reduction route. Black-Right-Pointing-Pointer Citric acid acted as reducing agent and surfactant in the route. Black-Right-Pointing-Pointer This is a facile, low energy and environmental friendly route. Black-Right-Pointing-Pointer The aqueous iron oxide ferrofluids were monodispersed and stable at pH of 7. Black-Right-Pointing-Pointer The calculated intrinsic loss power of the synthesized ferrofluids was very high.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colour and toxic characteristics of metakaolinite–hematite pigment for integrally coloured concrete, prepared from iron oxide recovered from a water treatment plant of an abandoned coal mine

A metakaolinite-hematite (KH) red pigment was prepared using an ocherous iron oxide sludge recovered from a water treatment plant of an abandoned coal mine. The KH pigment was prepared by heating the kaolinite and the iron oxide sludge at kaolinite's dehydroxylation temperature. Both the raw sludge and the KH specimen were characterised for their colour properties and toxic characteristics. The KH specimen could serve as a pigment for integrally coloured concrete and offers a potential use for the large volumes of the iron oxide sludge collected from mine water treatment plants. - Graphical abstract: A kaolinite based red pigment was prepared using an ocherous iron oxide sludge recovered from an abandoned coal mine water treatment plant. Display Omitted - Highlights: • A red pigment was prepared by heating a kaolinite and an iron oxide sludge. • The iron oxide and the pigment were characterised for their colour properties. • The red pigment can be a potential element for integrally coloured concrete.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Fe/SiO{sub 2} and iron oxides/SiO{sub 2} nanocomposites by long-term ball milling

Graphical abstract: - Highlights: • Iron–iron oxides/silica composites are synthesized by long term dry ball-milling. • Bcc iron and α-quartz powders are used as precursors. • Surface effects enhance coercivity in iron/silica nanocomposites. • In spite of their small size, about 10 nm, iron particles are ferromagnetic. • Ferro and superparamagnetic particles are found in maghemite/silica composites. - Abstract: Iron oxide/SiO{sub 2} nanocomposites are synthesized by dry ball-milling a mixture of bcc Fe and α-quartz powders for prolonged times. A sequence of nanocomposites is obtained, with small magnetic particles dispersed in a non magnetic, amorphous matrix. The powders are characterized by X-ray diffraction and transmission electron microscopy. The magnetic hysteresis properties are investigated in the range 50–300 K. After 120 h milling, deformed, non-spherical, α-Fe nanocrystallites of about 10 nm in size and very few small (<10 nm) maghemite particles are found. At room temperature, iron particles are ferromagnetic and a large effective magnetic anisotropy is estimated, which is mainly attributed to surface effects. Between 160 and 200 h milling, maghemite nanoparticles are observed while after 220 h grinding, hematite phase appears; after 340 h milling, the sample consists of ferromagnetic hematite particles with a broad size distribution (5–50 nm) embedded in an amorphous matrix.

36 MATERIALS SCIENCE↗

Characterization of iron oxide nanoparticle films at the air–water interface in Arctic tundra waters

Here, massive amounts of organic carbon have accumulated in Arctic permafrost and soils due to anoxic and low temperature conditions that limit aerobic microbial respiration. Alternative electron acceptors are thus required for microbes to degrade organic carbon in these soils. Iron or iron oxides have been recognized to play an important role in carbon cycle processes in Arctic soils, although the exact form and role as an electron acceptor or donor remain poorly understood. Here, Arctic biofilms collected during the summers of 2016 and 2017 from tundra surface waters on the Seward Peninsula of western Alaska were characterized with a suite of microscopic and spectroscopic methods. We hypothesized that these films contain redox-active minerals bound to biological polymers. The major components of the films were found to be iron oxide nanoparticle aggregates associated with extracellular polymeric substances. The observed mineral phases varied between films collected in different years with magnetite (Fe 2+ Fe 2 3+ O 4 ) nanoparticles (<5 nm) predominantly identified in the 2016 films, while for films collected in 2017 ferrihydrite-like amorphous iron oxyhydroxides were found. While the exact formation mechanism of these Artic iron oxide films remains to be explored, the presence of magnetite and other iron oxide/oxyhydroxide nanoparticles at the air–water interface may represent a previously unknown source of electron acceptors for continual anaerobic microbial respiration of organic carbon within poorly drained Arctic tundra.

54 ENVIRONMENTAL SCIENCES↗

Reducing acid leaching of manganiferous ore: Effect of the iron removal operation on solid waste disposal

The process of reducing acid leaching of manganiferous ore is aimed at the extraction of manganese from low grade manganese ores. This work is focused on the iron removal operation. The following items have been considered in order to investigate the effect of the main operating conditions on solid waste disposal and on the process costs: (i) type and quantity of the base agent used for iron precipitation, (ii) effective need of leaching waste separation prior to the iron removal operation, (iii) presence of a second leaching stage with the roasted ore, which might also act as a preliminary iron removal step, and (iv) effect of tailings washing on the solid waste classification. Different base compounds have been tested, including CaO, CaCO{sub 3}, NaOH, and Na{sub 2}CO{sub 3}. The latter gave the best results concerning both the precipitation process kinetics and the reagent consumption. The filtration of the liquor leach prior to iron removal was not necessary, implying significant savings in capital costs. A reduction of chemical consumption and an increase of manganese concentration in the solution were obtained by introducing secondary leaching tests with the previously roasted ore; this additional step was introduced without a significant decrease of global manganese extraction yield. Finally, toxicity characteristic leaching procedure (TCLP) tests carried out on the leaching solid waste showed: (i) a reduction of arsenic mobility in the presence of iron precipitates, and (ii) the need for a washing step in order to produce a waste that is classifiable as not dangerous, taking into consideration the existing Environmental National Laws.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗