Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

RFe{sub 2}Mg{sub x}Al{sub 8−x} (R=La–Nd and Sm; x≈0.8): Flux synthesis, structure, magnetic and electrical properties

Single crystals of Mg-substituted CeFe{sub 2}Al{sub 8} type intermetallics RFe{sub 2}Mg{sub x}Al{sub 8–x} (R=La–Nd and Sm; x≤1) were grown by reacting iron and rare earth metals in 1:1 Mg/Al mixed flux. The structure features mono-capped and bi-capped trigonal prismatic FeAl{sub 6} units. Electronic structure calculations indicate that magnesium substitution reduces the valence electron count, shifting the Fermi level away from a pseudo-gap. This changes the electronic nature of the cerium analog; the previously reported ternary CeFe{sub 2}Al{sub 8} shows strong hybridization between the cerium states and the conduction electrons, resulting in no magnetic moment on Ce atoms. On the other hand, magnetic susceptibility measurements on CeFe{sub 2}Mg{sub x}Al{sub 8–x} indicates a localized moment on cerium. The newly synthesized Pr, Nd and Sm analogs exhibit antiferromagnetic ordering at 2.8 K, 7.8 K and 12 K respectively. Solid state {sup 27}Al NMR of LaFe{sub 2}Mg{sub x}Al{sub 8–x} exhibits a broad Knight shift at ~1200 ppm, consistent with the metallic behavior shown by electrical resistivity data. - Graphical abstract: Mg substitution into CeFe{sub 2}Al{sub 8} modifies cerium valence due to changing valence electron count. - Highlights: • RFe{sub 2}Mg{sub x}Al{sub 8−x} (R=La–Nd, Sm) grow as large crystals from reactions in Mg/Al flux. • Products are magnesium-substituted variants of CeFe{sub 2}Al{sub 8}, with CaCo{sub 2}Al{sub 8} structure. • Ce magnetic moment in CeFe{sub 2}Mg{sub x}Al{sub 8−x} varies from that in CeFe{sub 2}Al{sub 8} due to VEC change. • Antiferromagnetic ordering observed for Pr, Nd, Sm analogs of RFe{sub 2}Mg{sub x}Al{sub 8−x}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure high-temperature crystal growth of equiatomic rare earth stannides RENiSn and REPdSn

The two series of equiatomic rare earth (RE) stannides RENiSn and REPdSn were systematically studied with respect to high-pressure modifications. The normal-pressure (NP) low-temperature (LT) modifications were synthesized by arc-melting and subsequently treated under high-pressure (P{sub max}=11.5 GPa) and high-temperature (T{sub max}=1570 K) conditions in a Walker-type multi-anvil press. The pressure and temperature conditions were systematically varied in order to improve the crystallization conditions. The new ZrNiAl-type high-pressure modifications HP-RENiSn (RE=Sc, Y, La, Gd–Lu) and HP-REPdSn (RE=Y, Sm–Dy) were obtained in 80 mg quantities, several of them in X-ray pure form. Some of the REPdSn stannides with the heavy rare earth elements show high-temperature (HT) modifications. The structures of HP-ScNiSn, HP-GdNiSn, HP-DyNiSn (both ZrNiAl-type), NP-YbNiSn, and HT-ErPdSn (both TiNiSi-type) were refined from single crystal diffractometer data, indicating full ordering of the transition metal and tin sites. TiNiSi-type NP-EuPdSn transforms to MgZn{sub 2}-type HP-EuPdSn: P6{sub 3}/mmc, a=588.5(2), c=917.0(3) pm, wR2=0.0769, 211 F{sup 2} values, 11 variables. The structure refinement indicated statistical occupancy of the palladium and tin sites on the tetrahedral network. The X-ray pure high-pressure phases were studied with respect to their magnetic properties. HP-YPdSn is a Pauli paramagnet. The susceptibility data of HP-TbNiSn, HP-DyNiSn, HP-GdPdSn, and HP-TbPdSn show experimental magnetic moments close to the free ion values of RE{sup 3+} and antiferromagnetic ordering at low temperature with the highest Néel temperature of 15.8 K for HP-TbPdSn. HP-SmPdSn shows the typical Van Vleck type behavior along with antiferromagnetic ordering at T{sub N}=5.1 K. HP-EuPdSn shows divalent europium and antiferromagnetic ordering at 8.9 K followed by a spin reorientation at 5.7 K. - Graphical abstract: Packing of the polyhedra in the high-pressure phase of EuPdSn. - Highlights: • High-pressure phases of the stannides RENiSn and REPdSn. • Crystal growth conditions. • Pressure- and temperature-driven phase transitions. • Magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and anisotropic properties of single crystalline Ln{sub 2}Ru{sub 3}Al{sub 15+x} (Ln=Gd, Tb)

Single crystals of Ln{sub 2}Ru{sub 3}Al{sub 15+x} (Ln=Gd, Tb) have been grown using the self-flux method under Ru-poor conditions. The structure of the Gd analog is found to be highly dependent on the synthesis method. Gd{sub 2}Ru{sub 3}Al{sub 15.08} orders antiferromagnetically at 17.5 K. Tb{sub 2}Ru{sub 3}Al{sub 15.05} enters an antiferromagnetic state at 16.6 K followed by a likely incommensurate-to-commensurate transition at 14.9 K for crystals oriented with H//ab. For crystals oriented with H//c, a broad maximum is observed in the temperature dependent M/H, indicative of a highly anisotropic magnetic system with the hard axis in the c-direction. The magnetization as a function of field and magnetoresistance along the ab-direction of Tb{sub 2}Ru{sub 3}Al{sub 15.05} display a stepwise behavior and indicate strong crystalline electric field effects. - Graphical abstract: Single crystal, structure, and highly anisotropic magnetoresistance due to strong crystalline electric field effects of Tb{sub 2}Ru{sub 3}Al{sub 15.05}. - Highlights: • Single crystals of Ln{sub 2}Ru{sub 3}Al{sub 15+x} were grown for the first time via flux growth. • The structure of Gd{sub 2}Ru{sub 3}Al{sub 15.09} differs from that of arc melted Gd{sub 2}Ru{sub 3.08}Al{sub 15}. • Tb{sub 2}Ru{sub 3}Al{sub 15.05} exhibits highly anisotropic magnetic and transport properties. • The properties of Tb{sub 2}Ru{sub 3}Al{sub 15.05} arise due to crystalline electric field effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-pot solvothermal synthesis of ordered intermetallic Pt{sub 2}In{sub 3} as stable and efficient electrocatalyst towards direct alcohol fuel cell application

Ordered intermetallic Pt{sub 2}In{sub 3} nanoparticles have been synthesized by superhydride reduction of K{sub 2}PtCl{sub 4} and InCl{sub 3}.xH{sub 2}O precursors using facile, one-pot solvothermal method. We report surfactant free solvothermal synthesis of a novel ordered Pt{sub 2}In{sub 3} intermetallic nanoparticles for the first time. The structure and morphology of the catalyst has been confirmed by powder X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, energy-dispersive spectrometry and X-ray photoelectron spectroscopy. The electrocatalytic properties of the catalysts have been investigated by cyclic voltammetry and chronoamperometry. The as prepared Pt{sub 2}In{sub 3} catalyst exhibit far superior electrocatalytic activity and stability towards alcohol oxidation over commercial Pt/C. The specific activity of as synthesized catalyst was found to be ~3.2 and ~2.3 times higher than commercial Pt/C for methanol and ethanol oxidation, respectively. This improved activity and durability of the Pt{sub 2}In{sub 3} nanoparticles can make the catalyst an ideal catalyst candidate for direct alcohol fuel cell. - Graphical abstract: The ordered structure of Pt{sub 2}In{sub 3} nanoparticles synthesized by solvothermal method has confirmed through XRD and TEM. Cyclic voltametry and chronoamperometry showed improved catalytic activity and stability compared to commercial Pt/C. - Highlights: • Ordered Pt{sub 2}In{sub 3} nanoparticles were synthesized by solvothermal method. • Electrooxidation of alcohols on Pt{sub 2}In{sub 3} catalyst was investigated in acidic medium. • Pt{sub 2}In{sub 3} catalyst has superior catalytic activity compared to commercial Pt/C. • Pt{sub 2}In{sub 3} catalyst exhibited much higher stability than commercial Pt/C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Γ-brasses in the Mn-Zn system: An experimental and computational study

Here, the synthesis and characterization of Ni 2 Zn 11 -type γ-brasses with composition Mn 2+x Zn 11–x (x = 0.06–0.60) are reported. The synthesis follows standard high temperature methods and characterization by single crystal X-ray diffraction (SCXRD) and powder X-ray Diffraction (PXRD) techniques as well as Energy Dispersive Spectroscopy (EDS). First principles electronic structure calculations showed preferential heteroatomic Mn–Zn bonding and repulsive effects of Zn–Zn 3 d –3 d orbital overlap that influence the metal atom distribution in the structure. Local bonding environments and the relationship of Mn 2+x Zn 11-x to other γ-brasses containing 3 d metals such as PdCoZn 11 and Ni 2 Zn 11 are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer

Solid-state diffusion bonded joints were prepared between commercially pure titanium and 304 stainless steel with nickel as an intermediate material in the temperature range of 800-950 deg. C for 10.8 ks under a 3 MPa uniaxial pressure in vacuum. The interface microstructures and reaction products of the transition joints were investigated by optical and scanning electron microscopy. Up to 850 deg. C processing temperature, a 300-{mu}m nickel interlayer completely restricts the diffusion of titanium to stainless steel. However, the nickel interlayer cannot block the diffusion of Ti to the stainless side and {lambda} + {chi} + {alpha}-Fe, {lambda} + FeTi and {lambda} + FeTi + {beta}-Ti phase mixtures are formed at the SS-Ni interface, when bonding was processed at 900 deg. C and above. These reaction products were confirmed by X-ray diffraction. A maximum tensile strength of {approx} 270 MPa and shear strength of {approx} 194 MPa, along with 6.2% ductility, were obtained for the diffusion bonded joint processed at 850 deg. C. Fracture surface observation in SEM using EDS demonstrates that failure occurred through the Ni-Ti interface of the joints when processed up to 850 deg. C and through the SS-Ni interface when processed at and above 900 deg. C.

36 MATERIALS SCIENCE↗

Phase transformations of NbCr{sub 2} intermetallics produced by mechanical alloying followed by hot-pressing consolidation

Mechanical alloying followed by hot-pressing consolidation has been used to produce NbCr{sub 2} intermetallics under different conditions. High-purity Nb and Cr crystalline powders, in the relative (molar) ratio of 13:1, were milled for periods up to 100 h. This powder was vacuum-sintered at temperatures ranging from 1423 to 1573 K for 0.5 h under a pressure of 45 MPa. The phase transformations of the NbCr{sub 2} were investigated by X-ray diffraction and scanning electron microscopy; several different phase transformations were observed. Increasing the milling time up to 100 h transforms into a mixture of C14, Nb, Cr and C15. The experimental results show that new evidence based on X-ray diffraction measurements further establishes the existence of a high-temperature C14 Laves polytype; an intermediate C36 structure for NbCr{sub 2}, reported in the literature, was not detected in this study. The relationship between the various phase transformations, based on the atomic radii and different preparation techniques, is discussed.

36 MATERIALS SCIENCE↗

Impulse pressuring diffusion bonding of titanium alloy to stainless steel

Impulse pressuring diffusion bonding between a titanium alloy TA17 and an austenitic stainless steel 0Cr18Ni9Ti has been carried out in vacuum. Relationships between the bonding parameters and the tensile strength of the joints were investigated, and the optimum bond parameters were obtained: bonding temperature T = 825 deg. C, maximum impulse pressure P{sub max} = 50 MPa, minimum impulse pressure P{sub min} = 8 MPa, number of impulses N = 30, impulse frequency f = 0.5 Hz. The maximum tensile strength of the joint was 321 MPa and the effective bonding time was only 180 s. The reaction products and the interface structure of the joints were investigated by optical microscopy, scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and X-ray diffraction (XRD). The study revealed the existence of FeTi, Fe{sub 2}Ti, {sigma} phase and {beta}-Ti in the reaction zone. Brittle Fe-Ti intermetallic phases lower the strength and ductility of the impulse pressuring diffusion bonded couples significantly. This technique provides a reliable and efficient bonding method of titanium alloy and stainless steel.

36 MATERIALS SCIENCE↗

Microstructure and room-temperature mechanical properties of Fe{sub 30}Ni{sub 20}Mn{sub 35}Al{sub 15}

A novel alloy with nominal composition Fe{sub 30}Ni{sub 20}Mn{sub 35}Al{sub 15} was prepared by arc melting. Secondary electron microscopy and transmission electron microscopy examinations showed that it had a eutectoid structure, consisting of alternating FCC and B2 lamellae, whose widths were {approx} 500 nm and {approx} 200 nm, respectively. The room-temperature yield strength and Vickers hardness of the as-cast alloy were 740 {+-} 30 MPa and HV310 {+-} 15, respectively, and the alloy exhibited {approx} 8% elongation under tension.

36 MATERIALS SCIENCE↗

Microstructure and electrochemical characterization of laser melt-deposited Ti{sub 2}Ni{sub 3}Si/NiTi intermetallic alloys

Corrosion and wear resistant Ti{sub 2}Ni{sub 3}Si/NiTi intermetallic alloys with Ti{sub 2}Ni{sub 3}Si as the reinforcing phase and the ductile NiTi as the toughening phase were designed and fabricated by the laser melt-deposition manufacturing process. Electrochemical behavior of the alloys was investigated using potentiodynamic polarization testing and electrochemical impedance spectroscopy in an NaOH solution. The results showed that the alloys have outstanding corrosion resistance due to the formation of a protective passive surface film of Ni(OH){sub 2} as well as the high chemical stability and strong inter-atomic bonds inherent to Ti{sub 2}Ni{sub 3}Si and NiTi intermetallics. The Ti{sub 2}Ni{sub 3}Si content has a significant influence on the microstructure of the alloys but only a slight effect on electrochemical corrosion properties.

36 MATERIALS SCIENCE↗

The influence of cooling rate on the microstructure of an Al-Ni hypereutectic alloy

An Al-4 at.% Ni alloy was prepared by a melt spinning technique and characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and high resolution transmission electron microscopy. The resulting ribbon microstructure consists of intermetallic Al{sub 9}Ni{sub 2} globular-like structures embedded within an aluminum matrix. Characteristic globules are nanometric ({approx} 100 nm) and are mainly located at the grain boundaries. The resulting effect on the mechanical properties is the enhancement of the alloy hardness from 58 to 371 HV.

36 MATERIALS SCIENCE↗

Galvanised steel to aluminium joining by laser and GTAW processes

A new means of assembling galvanised steel to aluminium involving a reaction between solid steel and liquid aluminium was developed, using laser and gas tungsten arc welding (GTAW) processes. A direct aluminium melting strategy was investigated with the laser process, whereas an aluminium-induced melting by steel heating and heat conduction through the steel was carried out with the GTAW process. The interfaces generated during the interaction were mainly composed of a 2-40 {mu}m thick intermetallic reaction layers. The linear strength of the assemblies can be as high as 250 N/mm and 190 N/mm for the assemblies produced respectively by laser and GTAW processes. The corresponding failures were located in the fusion zone of aluminium (laser assemblies), or in the reaction layer (GTAW assemblies)

36 MATERIALS SCIENCE↗

In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

Fe-Co-Mo alloys show extraordinary mechanical properties which make them potential candidates for various high-performance applications. In the present study, for the first time, the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy was studied by small-angle X-ray scattering using high-energy synchrotron radiation. The specimens were isothermally aged in an in-situ furnace. The small-angle X-ray scattering patterns showed scaling behavior and were evaluated by employing a model function from the literature. This approach provides information about the characteristic length scale and the volume fraction of the precipitates in the alloy.

36 MATERIALS SCIENCE↗

Characterization of intermetallic precipitates in a Nimonic alloy by ultrasonic velocity measurements

Ultrasonic velocity measurements have been carried out in Nimonic 263 specimens thermally aged at 923 and 1073 K for durations up to 75 h and correlated with the results of hardness measurements and electron microscopy studies. The ultrasonic velocities and hardness results obtained in the specimens thermally aged at both temperatures clearly indicated that ultrasonic velocity is more sensitive to the initiation of the precipitation, whereas the influence of precipitation on hardness can be observed only after the precipitates attain a minimum size to influence the movement of dislocations. Further, ultrasonic velocity measurements also revealed faster kinetics and a lesser amount of precipitation at 1073 K compared to 923 K due to higher solubility of precipitate-forming elements.

36 MATERIALS SCIENCE↗

Corrosion behavior of Ti-Al-N/Ti-Al duplex coating on AZ31 magnesium alloy in NaCl aqueous solution

In this study, Ti-Al-N/Ti-Al duplex coating was deposited on AZ31 magnesium alloy by magnetron sputtering with a Ti/Al composite target. Scanning electron microscopy and Auger electron spectroscopy were applied to investigate the morphology and elemental concentration of the obtained coating, respectively. The top layer was Ti-Al-N film with a Ti:Al:O:N ratio of 0.32:0.84:0.08:1, and the bottom layer was Ti-Al film with a Ti:O:Al ratio of 1.94:0.12:1. Each layer of this coating presented a developed columnar structure. The polarization test and immersion test were used to investigate corrosion behavior of the coated sample in 3.5 wt.% NaCl aqueous solution. The results showed that this duplex coating could protect the substrate effectively in NaCl aqueous solution. Nevertheless, several through-thickness micropores in the coating finally induced the failure of the coated AZ31 in the immersion test.

36 MATERIALS SCIENCE↗

Structure and plasticity in hot deformed FeAl intermetallic phase base alloy

This paper constitutes part of research conducted on the possibility of forming alloys based on intermetallic phases from the Fe-Al system via thermoplastic processing. Insufficient plasticity, which is an inhibitor of further development of these intermetallics as construction materials, makes the range of their applications limited. In the paper, an analysis is conducted of the influence of deformation parameters on the structure of an alloy of Fe-Al with the B2 type structure. Axi-symmetric compression tests were carried out at temperatures ranging from 600 deg. C to 1200 deg. C and at a deformation rate from 0.001 s{sup 1} to 10 s{sup -1}. Structural examination was carried out using light microscopy and transmission electron microscopy. A quantitative evaluation of the structure was made with the use of 'Met-Ilo'. The results obtained will be used for the development of mathematical models determining the influence of deformation parameters on the alloy structure.

36 MATERIALS SCIENCE↗

Microstructural developments in TLP bonds using thin interlayers based on Ni-B coatings

Oxide dispersion strengthened alloy MA 758 was transient liquid phase (TLP) bonded using thin interlayers based on Ni-B electrodeposited coatings and the microstructural developments across the joint region were studied. The bonding surfaces were electrodeposited with a coat thickness of 2-9 {mu}m and microstructural features were characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. The homogeneity of the joint was assessed performing micro-hardness test. The results showed that the coating thickness as well as the amount of melting point depressants (boron) in the coatings had a significant effect on the microstructural developments within the joint region. TLP bonds made using a 2 {mu}m thick coating interlayer produced a joint with no visible precipitate formation and parent metal dissolution, and the absence of precipitates was attributed to the lower volume concentration of boron in the 2 {mu}m thick coating interlayer.

36 MATERIALS SCIENCE↗

Influence of constitutional liquation on corrosion behaviour of aluminium alloy 2017A

The purpose of this work was to investigate microstructural aspects of constitutional liquation in the aluminium alloy 2017A and to determine its effect on corrosion behaviour of this alloy. Non-equilibrium melting of the alloy in the naturally aged condition was provoked by rapid heating above the eutectic temperature and immediate cooling in air. Corrosion testing was performed by exposure to a marine onshore atmosphere. The microstructure examinations were carried out using light microscopy, scanning electron microscopy, X-ray energy dispersion and X-ray diffraction analysis. It was found that, due to rapid heating rate, coarse {theta} (Al{sub 2}Cu) particles were melted by constitutional liquation and this way introduced strong susceptibility of 2017A alloy to intergranular corrosion.

36 MATERIALS SCIENCE↗